eChapters

Objective: To study the seed treatment methods and equipments A key factor in achieving the few potential of good quality seed is the blanket treatment of the seeds with agrochemical in order to control or prevent diseases in the  crops.

Seed is the primary and essential starting point of a wide range of crops, including the majority of vegetables except those vegetative propagated (e.g- potato and sweet potato). Seedling emergence and field stand establishment is one of the problems facing the growers, especially in early planting where adverse conditions are prevailed (low temperature and high soil moisture). Seed germination and seedling emergence are affected by many factors such as: seed genotype, seed quality (seed viability and seed vigor) and the environmental conditions (moisture and temperature) prevailing during seed germination and subsequent seedling emergence, assuming that the seed is not dormant.

Seed Priming is the process of controlled hydration of seeds to a level that permits pre-germinative metabolic actively to proceed, but prevents actual emergence of the radical. It is done to increase the speed and uniformity of germination particularly under adverse conditions of temperature, moisture and salinity conditions. In this condition, seeds go through all the essential preparatory processes of germination but prevent cell elongation and radical emergence. During the waiting period at the osmotic barrier the ‘slower’ seeds tend to catch up with the ‘faster ones’ so that the subsequent germination is more uniform, than that of untreated seeds. The duration of priming varies with the crop as well as method of priming such that priming is allowed for I and II stage of seed imbibitions without allowing radical protrusion.

Objective

    1.    Design drum priming (2-3 kg and drying unit with house hold or commonly available materials.
    2.    Standardization of time for seed priming for different crops.

Probable drum priming unit components

A] A vertical drum which need to be rotating
B] A motor which will rotate
C] A desktop assembly
D] A simple two way seed drier (Fig not given here)

The objective of seed pelleting is to provide an opportunity to package effective quantities of materials such that they can influence the micro-environment of each seed.
 
Process of Pelleting

Seeds are introduced into a coating drum or pan that resembles a cement mixer. An amalgam of pelleting materials (clays, limestone, calcium carbonate, talc, vermiculite) and cementing adhesives (gum Arabic, gelatine, methyl cellulose polyvinyl alchol) are used to form the pellet and other compounds such as inoculants, fungicides, etc. May be added to enhance seed performance.

These materials include barrier coated paper bags, barrier laminated film bags, jute bags, PP woven box bag and cotton bags.
 
A: Paper Bags
    1.    Coated paper:  bags provide a barrier for leaking or staining of the product. This can be done by a greaseproof or claycoated kraftpaper.
    2.    Open-Mouth sacks:  can be manufactured using different types of paper. Simple kraftliner, glossy claycoated and lacquered outerliner are possible. These sacks can be supplied with liners and printed up to 8 colours.

Fumigation is a method of pest control that completely fills an area with gaseous pesticides to suffocate or poison the pests within. It is utilized for control of pests in buildings, soil, seed, and grain produce. It is also used during processing of goods to be imported or exported in order to prevent transfer of exotic organisms. Fumigants are chemical compounds in gaseous form that enter the body of insect through the spiracles spread all over via trachea and tracheoles. The important fumigants are Methyl bromide, Ethylene dibromide, Aluminium phosphide, Ethyl formate, Hydrogen cyanide, Chloropicrin etc.

The moisture content is the amount of water in the seed and is usually expressed as a percentage. It can he expressed on either a wet weight basis (where it is expressed as a percentage of the fresh weight of the seed) or on a dry weight basis (where it is expressed as a percentage of the dry weight of the seed). The seed moisture content is the most vital parameter, which influence the seed quality and storage life of the seed. Seed moisture content is closely associated with several aspects of physiological seed quality. For example, it is related to seed maturity, optimum harvest time, mechanical damage, economics of artificial seed drying, seed longevity and insect & pathogen infestation.

Mechanical damage in oil seeds like soya bean can be induced at any time during harvesting, handling, conditioning and sowing operations. There is relationship between moisture and mechanical damage. In general the low moisture containing seeds are more prone for mechanical damage than the high moisture containing seeds. In this experiment we look for this relationship by measuring seed quality parameters like germination and leakage (electrical conductivity).

According to Harrington’s rule (1960) of thumb, for storage, every one percent increase in moisture content, the seed life is halved far seeds of moisture content of 5-14%. For temperature, every 5^ºC rise in temperature, between 0-50 ^ºC, the seed life is halved.

Seed processing efficiency (SPE) is one of the important aspects in seed processing. It will help in measuring the potential of the shop floor. It will also help in standardizing activities like screens and improving physical purity. SPE will help to improve the quality of the seed material and help in utilizing the machines at their optimum capacity. SPE may vary among the different crops and even among the varieties.
 
To quantify SPE we need to pass the test sample (bulk-pre processed) through the target machine and enter the details in a processing register. To quantify the SPE we need to follow these mathematical formulae:

NAME OF THE UNIT: 

    1.    Location of Seed Storage 
    2.    Date of Inspections/visit

PPEs are the personal protection equipments which protect the personnel against some hazards in the shop floor. PPEs form important aspects of Environment (safe disposal of treated chemicals, dusts coming out of processing), Safety (to seed storages) and Health (personnel) (ESH) strategy of any shop floor.

The “falling number” is a measurement used by plant breeders and grain quality specialists to determine the soundness of wheat, which is primarily influenced by the degree of sprouting in a grain sample. Hagberg Falling Number is the full name of this international standard of sprout measurement.  The term “falling numbers” refers to the amount of time it takes for the Hagberg steel ball in this sprout analysis tool to fall through a flour/water slurry that has been heated to release the starch from water. 

There are stages in seed supply chain where seed losses happen at harvesting and post harvest stage. These losses may occur due to higher moisture at harvest, due to harvesting methods, processing methods, at seed storage, during transport etc. Estimation of these losses is an important function of seed inventory management. Estimating seed losses help to improve processing and seed distribution efficiency. These simple statistical tools will help to measure quantitative post harvest seed losses. Seed testing can be used for measuring qualitative post harvest seed losses.

To assess the quality of the seed is necessary before it is shipped for packaging and made available to the farming community. To assess certain routine seed quality parameters which are statutory for labelling seed sampling and testing are very critical. Seed testing is not only a mandatory trade requirement but also decides the market potential of a particular product in the market and safeguard the brand image of the company. Seed sampling for labelling and other trade requirements is done at processing plant. The reliability of seed testing is depends on the accuracy with which the sample represents the lot and precision of the laboratory test. In many cases variations in the test results are due to variation in the sampling. Hence, seed sampling is one of the important activities of the shop floor or processing unit.

The management of storage in open and closed storage is critical before start of any seed processing activities. When seed lots reach the shop floor, they need to be stored properly. Unlike commercial produce seed lots cannot be stored in bulk. These need to be stacked lot wise and there is problem of “stackburn”-resulting from successive layers in building a bag stack. In crops like soyabean-”stackburn” can have detrimental effect on seed quality. The quality parameters like germination and viability can get lost instantly if not properly stacked on the pallets.

Storage of paddy seed lots after harvesting is one of the crucial aspects of processing shopfloor. Paddy due to increased mechanised harvesting may loose vital seed quality parameters. Since seed growers cannot buy a combined harvester themselves-they resort to hiring of this machine. Sometimes in the hurry of completing harvesting they harvest the crop at un-safe moisture content. This un-safe moisture content may go up to 50-60% also. Harvesting of seed crop with high moisture has adverse effect on storability. Ensuring safe seed moisture is very critical especially during rabi-summer seed production cycle. Most of the growers depend on sun drying for reducing the seed moisture. But paddy should not be dried >3% in one cycle. Follow tempering and convection cooling after every cycle and repeat the cycle till seed attains safe moisture content (14%).

India is famous as the ‘Land of Spices’ world over. Spices are nature’s gift to humankind for flavoring our food. They are also used as preservative and in pharmaceuticals. India is the largest producer, consumer and exporter of seed spices and their value added products. About 63 different spice crops are cultivated in the country. Among them, seed spices are annual herbs, whose dried seeds or fruits are used as spices. These crops share 21.87% in terms of quantity and 7.42 % in terms of value to total spices export in the country. The country grows a wide variety of seed spices like coriander, cumin, fenugreek and fennel as major crop, while, dill, nigella, ajwain, anise, celery, caraway, parsley, black cumin and few other are categories as the minor seed spices.

Notified Varieties of Different Seed Spices

Seed
The seed, in botany is a mature ovule, consisting of an embryo together with a store of food all surrounded by a protective coat and bear ability to develop a new plant on optimum conditions of soil, moisture and light. It usually develops after the fertilization on an egg cell by male generative cell from a pollen grain. Seeds of some species develop without the intervention of the male cell, formed entirely of ‘mother’ tissue. Such seeds are called apogamic seeds. In seed technology, the seed is seed or any vegetatively propagated material produced from seed crop in accordance to Indian seed standards and has potential to develop new crop in presence of soil, moisture and light.

Seed Sampling

The size and quantity of seed sample required for seed quality testing remains small as compared to the seed lot hence, representative samples are randomly drawn for this purpose. The process of obtaining a uniform and representative sample from a seed lot for seed quality testing is called seed sampling. The samples are prepared in accordance to ISTA rules to ensure that small size sample should represent truly and in the same proportion all constituents of seed lot.

1. Isolation distance

Physical purity test determines the proportion of pure seed, other crop seed, weed seed, inert matter, moisture and germination components in the seed lot by weight in percentage in accordance to prescribed Seed Standards. It thus, helps in improving the plant stand, raising a pure crop by eliminating other crop seeds, weed seeds and disease free-seeds. Seed must not be sold until the percentage of pure seed, other crop seed, weed seed, and inert matter are in accordance to seed physical purity standards. Physical purity test is required for seed certification or seed law enforcement and it is a pre-requisite for ger- mination test.

Seed Germination Test

Germination is the process of emergence and development of seed embryo into a plant under favourable environmental conditions of water, soil, sunlight and temperature. The best example of germination is the sprouting of a seedling from a seed of an angiosperm plant. It reflects the ability of seed to produce a normal plant under favourable environmental conditions. The germination rate of a particular seed lot is a key indicator of its performance in the field.

Seed Viability Test

Germination test for a seed lot is a pre-requisite to know its potential of emergence under field condition. However, this test requires few days to weeks and a month in some cases. Tetrazolium test gives quick information on seed viability or germinability. It makes possible to distinguish red coloured living parts of seeds from the colourless dead ones. Staining of seeds determines  viability.  Completely  stained  seeds  are  viable  while,  partially and comparatively unstained seeds are non-viable. This test is not valid as compared to seed germination test.

The seed moisture content is the amount of water present in the seed. It is generally expressed in percentage of dry and wet seed weight. It is the loss in weight of the original sample when it is dried. High moisture content in seed sample favors the mechanical damage, seed longevity, incidence of disease and insect pests.

Objective

i. To know the moisture content of seeds by suitable methods
ii. To suggest the seed drying.

Seed storage is the preservation of viable seeds from the time of collection to the required for sowing. It is important to get adequate plant stands in addition to healthy and vigourous plants.

Objectives

i. To maintain initial seed quality during storage period by providing suitable conditions.

ii. To maintain the seed germination and emergence rates.

iii. To prevent the seed deterioration during storage period.

iv. To maintain the physical and physiological seed qualities.

Mini seed testing lab analytical register

1.1. INTRODUCTION

During the last 30 years, India’s food production nearly doubled from 102 million tons. Almost all of this increase resulted from higher yield in all food grains rather than increase in area, particularly wheat, rice, maize and some extent in pulses and oil seed crops. This has contributed to a significant reduction in poverty from 55% to 26% (Dar, 2011). The increase in yield is the result of scientific innovations in India and other parts of the world and their adoption in India.

In 1871, the Government of India created Department of Agriculture. The impact of these departments in enhancement of crop productivity was not remarkable. Later, the Government of India established the Imperial Agricultural Research Institute in 1905 in Pusa, Bihar to enhance the agricultural research and education. Later, the headquarter of Imperial Agricultural Research Institute has been shifted to New Delhi in the year 1936. The name of the institute has been changed in 1946 as Indian Agricultural Research Institute. To boost the agricultural Research activities, Imperial Council of Agricultural Research was established in the year 1929, subsequently, the name of Imperial Council of Agricultural Research has been changed to its present form of Indian Council of Agricultural Research (ICAR) in 1946. Since then, ICAR playing significant role in all sphere of agricultural research, education and extension. A number of varieties and hybrids of different crops have been developed and released by the scientists of ICAR. To test the outcome of the agricultural research, ICAR has started All India Coordinated Crop Improvement Projects, which provide an efficient channel for multilocation testing of newly evolved strains.

2.1. INTRODUCTION

Pollination is the process of mating in plants, that is, the transfer of pollen from anther to stigma. In flowers, pollen delivered to the stigma through a wide range of mechanisms that ensure an appropriate balance in the genetic makeup of the species. Most plant species have evolved ways to ensure an appropriate degree of interchange of genetic material between individuals in the population, and cross-pollination is the normal type of pollination. Plants benefit most by being pollinated by other individuals because this broadens the genetic characteristics of individual plants. As a result, they are more adaptable to necessary changes. Self- and often-pollinated crops evolved from cross pollinated crops.

Pollination followed by fertilization is important in agriculture, particularly for the crops whose economic part is either fruit or seed, such as, rice, wheat, fruit vegetables etc. For other crops, these events are also important for production of seed for cultivation of next generation, for examples, green vegetables (amaranth, palak, cabbage, cauliflower etc).

The study of pollination brings together many disciplines, such as botany, plant breeding, horticulture, entomology, and ecology. The pollination process as an interaction between flower and vector was first addressed in the 18th century by Christian Konrad Sprengel. It is important in horticulture and agriculture, because fruiting is dependent on fertilization, which is the end result of pollination.

3.1. INTRODUCTION

Heterosis is the superiority of the F1s over the parental forms. The term heterosis was first used by Shull (1910) to describe the interpretation of increased vigour, size, fruitfulness, speed of development, resistance to diseases and insect pests or some other characteristics manifested by out-breeding organisms as compared to corresponding inbreds. Exploitation of heterosis is gaining momentum due to increased yield, quality, uniformity, better desirable traits and management of biotic stresses. The future of most of the economic crops will be for hybrids for sustainable development of higher economic returns to the farmers. Sustainable increase in area under hybrid crops is witnessed by its popularity and adoption by the farmers.

4.1. INTRODUCTION

Rice (Oryza sativa) is the major food crop in the world. Nearly 40% of the world population consumes rice as the major staple food. Most of the people, who depend on rice as primary food, live in the less developed countries.  Archeological evidence on rice in India dates back to 1500-1000 B.C. Since the dawn of civilization, rice has served humans as a life-giving cereal in the humid regions of Asia and, to a lesser extent, in West Africa. Introduction of rice into Europe and the America has led to its increased use in human diets. There are 42 rice producing countries throughout the world but China and India are major rice production centers. Rice is grown in wide range of agro-climatic conditions ranging from mountainous (Jammu) lands to low land delta areas (Sundarban), spanning an area from 53° latitude north to 35° south of the world but about 90% of the crop is grown and consumed in Asia. Rice provides fully 60% of the food intake in Southeast Asia and about 35% in East Asia and South Asia. The highest level of per capita rice consumption (130-180 kg per year, 55-80% of total caloric source) takes place in Bangladesh, Cambodia, Indonesia, Laos, Myanmar (Burma), Thailand, and Vietnam (Kenneth and Kriemhild, 2000). In many cultures of the world rice is the central part of people’s life and culture. Rice is an excellent food and is an excellent source of carbohydrates and energy.

5.1. INTRODUCTION
     
Rice is an important provider of nourishment for the world’s population. Indian scented rice, ‘Basmati’ has dominated the domestic and international market for aroma. Aromatic rice is an important commodity worldwide and command premium price over non-scented varieties. Most of the trade in aromatic rice is from India, Pakistan and Thailand. Bulk of aromatic rice from India and Pakistan consist of Basmati, while Thailand is the supplier of Jasmine rice. The Indian subcontinent has the Natural Gift of basmati rice that has been accepted as the best scented, long and slender grain in the world markets and gets high price. In addition to Basmati, many local landraces are grown traditionally, which excel in aroma, grain quality and cooking quality. Most of these genotypes are short bold to medium bold grain and hence not traded in the international market. However, in the domestic market its demand is greater than the Basmati rice. These are mainly used for special preparation, such as Khir in Bengal.

6.1. INTRODUCTION

After introduction of TN-1 (Taichung Native-1), Jaya, IR8 and other high yielding rice varieties during sixties and seventies, the productivity increased drastically and remained at plateau since last three decades. With no possibility to extend land area for rice cultivation in Asia, there is some scope for production advantages in rice through further expansion of high yielding varieties coverage in Pakistan, Thailand and India, expansion of area under irrigation in Bangladesh, Cambodia, India, Myanmar, the Philippines, Thailand and Vietnam, or expansion of boro rice in Bangladesh, India and Myanmar. Thus, utilization of heterosis has become one of the main methods for increasing yield. Hybrid is one of the viable and proven technologies to improve rice productivity. China is the first successful country to produce hybrid rice in appreciable quantity. This technology not only helped China to increase the rice productivity, but also to save land for crop diversification. The 'National Food Security Mission' has been launched envisaging increase of annual rice production by 10 million tons by 2011-'12. Here, hybrid rice may play important role to achieve the assigned target.

7.1. INTRODUCTION

The cultivation of wheat (Triticum spp.) reaches far back into history. Wheat was one of the first domesticated food crops and for 8000 years has been the basic staple food of the major civilizations of Europe, West Asia and North Africa. Today, wheat is grown on more land area than any other commercial crop and continues to be the most important food grain source for humans. Its production leads all crops, including rice, maize and potatoes.

Wheat is special in several ways. It is grown on more than 240 million ha, larger than for any other crop, and world trade is greater than for all other crops combined. The raised bread loaf is possible because the wheat kernel contains gluten, an elastic form of protein that traps minute bubbles of carbon dioxide when fermentation occurs in leavened dough, causing the dough to rise (Hanson et al., 1982). It is the best of the cereal foods and provides more nourishment for humans than any other food source. Wheat is a major diet component because of the wheat plant’s agronomic adaptability, ease of grain storage and ease of converting grain into flour for making edible, palatable, interesting and satisfying foods.

8.1. INTRODUCTION

Exploitation of heterosis through development of hybrid wheat is one of the most attractive options to increase wheat productivity. The efforts on developments of hybrid wheat started in early fifties (Kihara, 1951; Fukasawa, 1953) through cytoplasmic male sterility system (Livers and Heyne, 1968). Later, in seventies, research works from public as well as private sectors have shifted their efforts to the use of gametocide (chemically hybridizing agent-CHA), and a number of gametocides were tested in eighties. In wheat, heterosis is especially interesting for grain yield and for the resistance of plants to both parasites and climate risks (Rousset, 1986). With this advantage in mind, the first phase of hybrid wheat development started in the United States in 1975. Chronological events of wheat hybrid development have been given in Table 8.1. Subsequently, a number of hybrid wheat has been released in countries such as Argentina, France, and United States (Pickett, 1993).

9.1. INTRODUCTION

Maize (Zea mays L. ssp. mays 2n = 20), known as corn in some countries is an important cereal crop of the world. The scientific name from Greek word ‘Zea’ for a kind of grain and West Indian word ‘malnis’ for corn. Maize was domesticated in Mesoamerica and hence formed the Mesoamerican people’s identity and later it spread throughout American continent. Maize is widely cultivated throughout the world and a greater weight of maize is produced each year than any other cereal grain. USA produces almost half of the world’s harvest (42.5%) and other top producing countries include China, Brazil, Mexico, Argentina, India and France. During the year 2007, worldwide maize productivity was around 4970 kg per ha. Maize is the only cereal that can be harvested and used at various stages of plant development. The crop can be cultivated on a wide area from 580 N to 400 S from below sea level to altitudes higher than 3000 m and in areas with 250 mm to more than 5000 mm of rainfall per year (Shaw, 1988, Dowswell et al., 1996).

10.1. INTRODUCTION

The development of hybrid breeding methodology in maize and its successful application to exploit heterosis is considered as significant achievement of plant breeding in the present century. 
Even though Beal (1880) suggested for commercial cultivation of F1 varietal hybrids. It was Shull (1909) on the basis of his experiment gave pure line method of corn breeding, which laid foundation for present day hybrid breeding. Pure line methods of maize breeding involve three steps. 
    
·    Large scale inbreeding to obtain many homozygous/nearly homozygous inbred lines. 
    
·    Testing the selected inbred lines in all possible crosses.
    
·    Practical utilization of inbred lines in seed production of single cross hybrids.

11.1. INTRODUCTION

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important cereal crop and is the dietary staple of more than 500 million people in over 90 countries, primarily in the developing world. It is grown on 47 m ha in 104 countries in Africa, Asia, Oceania, and the Americas. Among those, USA, Nigeria, India, Mexico, Sudan, China, and Argentina are the major sorghum producers globally. Sorghum grain is mostly used directly for food (55%), and is consumed in the form of porridges (thick or thin) and flat breads; however sorghum is also an important feed grain (33%), especially in Australia and the Americas. Stover (crop residue after grain harvest) is an important fodder source to both milch and draft animals in mixed crop-livestock systems. Sorghum is also a good source of green fodder due to its quick growth and high yield and quality of biomass. Of late, sorghum with sugar-rich juicy stalks (called sweet sorghum) is emerging as an important biofuel crop. Thus sorghum is a unique crop with multiple uses as food, feed, fodder, fuel and fiber. Sorghum is generally grown in rainy season (spring) but in India it is grown in both rainy and postrainy seasons. The postrainy season sorghum grain is prized for its food value (Reddy et al., 2009).

12.1. INTRODUCTION

Sorghum [Sorghum bicolor (L.) Moench] is an important food/feed/fodder crop in more than 90 countries across the world and it is one of the cheapest sources of energy and micronutrients (Reddy et al., 2009; Ashok Kumar et al., 2011). Considerable efforts have been made to improve sorghum productivity through genetic enhancement and crop production and protection research all over the globe. Sorghum being an often cross-pollinated crop with cross pollination up to 2-15% depending on genotype and environment (House 1985), initially, pure-lines were the target products although phenomenon of heterosis was demonstrated in sorghum as early as in 1927 (Conner and Karper, 1927). Predominant self-pollinating nature of sorghum with tiny florets with single seed per emasculation and pollination prevented commercial exploitation of heterosis for commercial sorghum production. However, the discovery of a stable and heritable cytoplasmic-nuclear male-sterility (CMS) mechanism (Stephens and Holland, 1954), enabling large-scale, economic hybrid seed production gave a fillip to the exploitation of heterosis since early 1960s. The first commercial sorghum hybrid CSH 1 was released in 1964 in India. Using CMS mechanism, large number of commercial hybrids have been developed and released/marketed for commercial cultivation in all sorghum growing regions with strong Indian National Agricultural Research Systems (NARS).

13.1. INTRODUCTION

Pearl millet crop has a wide adaptability to local environments. It is hardy and can be grown in areas which are very hot and dry and on soils too poor for sorghum. Pearl millet is considered more efficient in utilization of soil moisture and has a higher level of heat tolerance than even sorghum and maize. It is adapted to warm and dry climate but most of the area under the crop is in drought- prone areas of the world. In these areas, pearl millet is usually grown with limited inputs, sparse rainfall, low soil fertility, and also face disease and pest problems, with correspondingly poor yields.
 
The low average yields are primarily a result of the hot, dry conditions where pearl millet is mostly grown, rather than pearl millet plant’s capability. Pearl millet hybrids grown under better conditions yield 3000 to 4000 kg/ha compared to 300 to 800 kg/ha when moisture and soil fertility become limiting factors. A majority of the subsistence farmers who typically cultivate this crop are unable to take advantage of high yield potential because they have limited options for improving their management practices. Pearl millet production can be increased through growing varieties/hybrids with improved tolerance to drought, diseases and responding to higher rates of fertilizer applications.

14.1. INTRODUCTION

Barley (Hordeum vulgare L. emend. Bowden) is one the most important ancient crops and played very important role in the development of agriculture and human civilization. It has also played crucial role in the progress of science of agriculture, physiology, genetics, plant breeding and malting and brewing science. It is the fourth most cereal crop after rice, wheat and maize in acreages and production in the world.  It is grown and used all around the world in many countries and has fed livestock, poultry and people since ancient time.  Barley was domesticated about 10,000 years ago in the Fertile Crescent of the Near East. Fertile Crescent is considered the first of at least seven primary centres of agriculture origin in the world (Smith, 1998; Baik and Ulrich, 2008). Barley is best known around the world as a feed grain and a premier grains for malting and brewing. When most people think of composition of beer, they only think of barley over other cereals. Although utilization of barley for food is relatively low as compared to other cereals today, throughout its history barley has remained an important and major food source poor people living in Western and Eastern Asia and Northern and Eastern Himalayan region nation like Tibet, Nepal and in Northern and Eastern Africa (Newman and Newman, 2006, 2008). Moreover, there has been resurgence of interest and use of barley as food primarily in the developed world due to an increasing emphasis on incorporating the diversity in consumption of whole grain in people’s diets due to its health benefits.

15.1. INTRODUCTION

Finger millet Eleusine indica (L.) is an Old World cereal grass commonly known as ‘finger millet’, is one of the staple food crop especially in India and Africa, which is widely grown in the arid regions of Asia and Africa and important minor millet grown in India.  Eleusine, the generic name, is obtained after the “Eleusine” the Greek Goddess of cereals and the common name finger millet is derived from the finger like branching of the panicle. It is also know by Goosegrass, Yardgrass, Wiregrass, Silver Crabgrass, Crowfoot Grass. It is commonly known as Finger millet in English, Kelvaragu in Tamil, Nachani in Marathi etc. Some Indian varieties of finger millet are Kempu ragi, Ragalli shivalli, Pichakaddi etc.  This crop is one among the hardiest crops which can with stand severe drought conditions and can also grow well under scanty rainfall condition. However with good irrigation facilities the yield of finger millet matches with crops like rice. Finger millet seeds remain free of pests and insects for a long duration extending up to 50 years hence serving as a food reserve in case of tough situations like famine.

16.1. INTRODUCTION

Millets are a large part of the basic diet for farm households in the world's poorest people in the poorest countries. The production of millets on average for the 5 years have been given in Table 16.1. Top consuming countries are India, Nigeria, Niger and China. However, just because a country is a top global consumer does not mean that millet is a significant source of calories for them. India and China are rank as the 1st and 4th consumers of millet, but due to their population size they rank 11th and 38th in per-capita consumption, accordingly.

Millet particularly the finger millet) is an excellent dietary source of calcium, iron, manganese, and methionine-  an amino acid lacking in the diets of hundred of millions of the poor who live on starchy foods such as cassava, plantain, polished rice, and maize meal. Millet use is diverse, including in cereals (including porridge and kasha), soups, breads and stuffings, fermented beverages, and baby food.

17.1. INTRODUCTION

Yam bean is one of the adaptable, low-maintenance, and nutritious food crop grown in moderate soil. It has many synonyms, in India it is known as Mishrikand (Hindi), Keshar or Ram-kaseru or Shankalu (Bengali). The root crops produced by legumes have long recognized as important and the FAO (1979) has recommended them as a source of human nutrition. The tuber is rich in starch (15-20%), 3-4% sugar, and have considerable amount of protein (2-3%). The harvested crop keeps well for months under ambient temperature. Kale (2006) observed relatively high iron contents in storage roots (up to 130 mg/kg of storage root dry matter). It can also be used for alcohol production.

The crop is very hardy, resistant to common insect pests and diseases. Most important is that the crop is not grazed neither by goats nor cows. The crop grows well in hot-humid environment and requires long, warm frost-free growing season. A moist, light textural soil is preferred for production of tuberous roots. As a legume crop, it can be grown without nitrogen fertilizer. Under good growing condition its root nodules habour symbiotic colonies of nitrogen-fixing bacteria- Rhizobium spp. (Nielsen et al., 1998b). A season crop of yam beans can release as much as 53 tons of usable nitrogen per acre into the soil. Mycorrhyzae also associated with the crop, thus facilitating phosphorus uptake. Thus, yam bean is highly suited to the needs of small farmers, and from both an ecological and a socioeconomic perspective

18.1. INTRODUCTION

Plant genetic resources (PGRs) are the foundation for the development of a food and nutritionally secured society. Food is the foremost important to sustain life and livelihood followed by shelter and cloth. Thus, the slogan of 3Fs may be modified as, “Food, Frame (shelter) and Fibre (cloth)”. All these 3Fs we can get from PGRs. There must be balance between demands and resources. Gradually the demand for basic needs increasing. So, we have to improve the PGRs to cope with the increasing demands. PGRs are the foundation for the development of these 3Fs. India is a country rich in crop biodiversity and genetic resources. The status of Germplasm accessions in the National Gene Bank is being presented in Table 18.1.

Plant breeding/genetic improvement aims at altering plant genotypes in a way that they suit human needs for food, feed and industrial raw products and support sustainable plant production. In that sense, plant breeding may be regarded as the evolution of plant type by the will of mankind. Plant breeding/genetic improvement is important because an improved cultivar is the most-economic and least laborious input for farmers.

Plant breeding is one of the early accomplishments of humankind. Many of the cultivated plants are the result of slow and involuntary improvement from wild progenitors by human being over centuries. In fact, the process of domestication of wild plants is one of the most fascinating chapters in the history of humankind. Concept of plant breeding came in the being through domestication as it involved selection of the most desirable types. Among the ancient domesticates, some of the vegetable crops are front-runners, like peas, radish, muskmelon, watermelon, etc. Other present day popular vegetable crops were domesticated later in the Neolithic times. Some species including certain vegetables are still undergoing the domestication process. However, for all practical purposes, the breeders have given up domestication of wild relatives of the cultivated species. Today, breeders often incorporate important characters, like resistance to biotic stresses, adaptability to environments, etc. to the cultivated forms from their wild relatives.

Selection from the available variations is the oldest and the most effective breeding procedure. However, genetic recombination at present forms the basis of modern plant breeding approach. In this respect, Josef Kolreuter’s extensive crossing experiments between 1755 and 1806 were essentially the first attempts to scientifically-reconstruct naturally occurring species and types by combining their characters. Any way, no matter what method is adopted in the breeding approach, it inevitably involves selection, which is the most difficult part of overall breeding process.

The industrial revolution in Western Europe and concomitant flourish of capitalism and increasing commercial agricultural production stimulated breeding activities as a profitable venture of capitalistic economy. Throughout the 19th century, thousands of large and small seed companies were developed in Germany, England and the United States out of this impetus.

Dietary constitution of Indian people is mostly cereal based. However, the cereals supply chiefly carbohydrates. Therefore, there is deficiency of protein, minerals and vitamins, especially vitamin A, riboflavin, vitamin C, etc. in the diet. The dieticians advocate the intake of 125 g leafy vegetables, 75 g other vegetables and 100 g root and tuber vegetables (total 300 g) everyday because vegetables provide all the nutrient components like carbohydrates, protein, fat, minerals, vitamins and water along with roughages, which are the essential constituents of a balanced diet.

India has attained food security by increased cereal production due to green revolution. In case of vegetables, although there has been increase in production from 15 million tonnes during 1950 to 94 million tonnes in 2005 but still more vegetables are needed to meet the minimum requirement of at least 250 g per day per capita. There has also been increasing demand for fresh export and for processing industries. Moreover, there is a pressure for increasing vegetable supply caused by constantly increasing population in a world of limited acres.

Addition of new agricultural land is of course not possible. In this situation, plant breeding can be expected to contribute substantially to greater vegetable productivity. This can be accomplished not only by the breeding of basically higher yielding varieties but also by the development of varieties that help to stabilize production through resistance to various biotic and abiotic stresses.

Vegetables are cheaper source of carbohydrates, proteins, minerals, vitamins and dietary fibers, and hence, assume a place of very great importance in the diet of individuals. All kinds of vegetable are grown almost universally. India occupies the prime position in the production of vegetable crops and is the second largest producer of vegetables in the world. The area and production of vegetables in India have been increasing during the post-green revolution period, and the country is heading towards another revolution in the form of Golden Revolution. However, there is an utmost requirement for genetic improvement of vegetable crops in terms of productivity, qualitative characters and resistance to biotic and abiotic stresses. For any genetic improvement programme, the presence of genetic variation is pre-requisite and mutation is the ultimate source of this heritable variation.

Mutation technique that holds promise of generating a much wider desirable variability than classical breeding has been refined. Out of 2275 mutant varieties worldwide in all crops, as many as 66 mutants are in vegetables. In terms of percentage, China, India, USSR, The Netherlands, The United States of America and Japan account for 26.8, 11.5, 9.3, 7.8, 5.7 and 5.3%, respectively of mutagen varieties in all crops. Such varieties are 3% in case of vegetables. After mutation treatment by a mutagen to a specific plant, DNA alterations (deletion, duplication, inversion, translocation, or transposition of larger DNA fragments, or simple basic pair changes) occur and lead to the DNA sequence change. Hence, new characteristics of that plant are established. In fact, induced mutations supply us with many new plant lines, which may be used as primary materials for crop breeding. Hence, mutation breeding seems to be an effective and ultimate option to improve vegetable crops in the shortest possible time. A large number of new promising varieties in different crops, including vegetables, have successfully been developed worldwide using various mutagens (Chopra, 2005).