eChapters

Phosphorus (P) is the second most important essential nutrient limiting crop/ plant growth, next only to nitrogen (N). Phosphorus is an important component of nucleic acid like deoxyribonucleic acid (DNA) and ribonucleic acid (RNA). It is needed for energy storage and transfer, which is the single most important essential function of P. Phosphate compounds act as “energy currency” within plants. The most important common P energy currency is adenosine diphosphate (ADP) and adenosine triphosphate (ATP). The ATP transfers energy for synthesis of ADP. Life is not possible without P. It is the source of energy that powers practically all energy-requiring biological processes in plants. Phosphorus is present in plant as phospholipid such as lecithin and cephalin which appears to be involved in the structural framework of protoplasm. Phosphorus is involved in many important processes such as photosynthesis, cell division, tissue development, and growth in plant. Requirement of P by the crops is less, compared to N and potassium (K). It is present in plant tissues. It is reported that for 5-6 t ha^-1 of wheat grain yield, it removes about 100-120 kg N, 20-30 kg P₂O₅ and 150-180 kg K₂O from soil.

Phosphorus is 11^th most abundant element on the earth crust. However, it is the least mobile element among the major plant nutrients. Its complex chemistry in soil makes it highly deficient nutrient element in most of the arable soils across the globe. Only 0.1% of the total P in the soil is available for uptake by plants because of its fixation as various insoluble compounds depending upon the soil pH. About 43% of the world’s arable soil is P deficient which limits crop growth and production (Roy et al., 2018). In the Indian context, about 80% of the soils are reported to have low to medium available P content (Muralidharudu et al., 2011). Thus, application of P-fertilizers to maintain the soil fertility and sustain crop productivity becomes imperative in today’s input intensive agriculture.

Phosphorus is only second to nitrogen as an inorganic nutrient required by both plants and microorganisms. It stimulates growth of young plants, giving them a good and vigorous start. Phosphorus management and nutrition has both economic and environmental implications. Phosphate constitutes nearly 0.1% of the earth’s crust. They occur in soil in inorganic and organic forms. The organic phosphorus containing compounds are derived from plants and microorganisms and are composed of nucleic acids, phospholipids, lecithin, phytin and related compounds. In soil, 15-85 % of the total P is organic and soils rich in organic matter contain abundant organic P. The inorganic forms are derived from parent rocks or through fertilizers application and manuring with bone meal. They are soluble in water when present as phosphates of Na, K, Ca, Mg etc. Phosphorus exists mainly as apatites, with the basic formula M₁₀ (PO₄) ₆ X₂. Commonly the mineral (M) is Ca, less often Al or Fe. The anion (X) is either F^-, Cl^-, OH^- or CO^2- ₃. Diverse combinations of M and X results in 200 forms of P.

It is a major constituent of nucleic acids in all living systems essential in the accumulation and release of energy during cellular metabolism. This element is added to the soil in the form of chemical fertilizers, or in the form of organic phosphates present in plant and animal residues. In cultivated soils it is present in abundance (i.e. 1100 kg/ha), but most of which is not available to plants, only 15 % of total soil phosphorus is in available form. Both inorganic and organic phosphates exist in soil and occupy a critical position both in plant growth and in the biology of soil.

Phosphorus in soil present both in inorganic form and organic form. The inorganic P can be divided into different pools. The major active inorganic forms are: P bound to aluminium (Al-P), iron (Fe-P), calcium (Ca-P) and silicate minerals and relatively less active forms are occluded and reductant soluble forms of P. On the other hand the principal organic P compounds present in soil are (i) inositol phosphate, (ii) phospholipids, (iii) nucleic acid and other unidentified esters and phosphoproteins.

15.1. Determination of Available Soil P

The availability of soil P to plant varies greatly depending upon the reaction, minerological composition and amount of the soil colloid. Very little P is present in the soil solution except in recently fertilized or sodic soils. The type of phosphate ions present in the soil solution depends on the soil pH. In soils of neutral to slightly alkaline pH, HPO₄^2- ion is the dominant form. In slightly or moderately acidic soils, both H₂PO₄^- and HPO₄^2- ions prevail. At strongly acidic soil H₂PO₄^- ion tends to dominate, while above pH 9.0, the PO₄^3- ion becomes more important than H₂PO₄^-.

Phosphorus is essential for plant growth and is involved in important physiological processes, but its availability in soil is strongly influenced by soil chemical conditions. This chapter provides a systematic treatment of phosphorus management in irrigated soils. It begins with the functions of phosphorus and the classification of soil phosphorus into organic and inorganic forms. The behaviour of phosphorus in alkali soils is discussed along with phosphate fixation, which can substantially influence phosphorus availability to crops. The chapter examines the sources of soil phosphorus used by plants and the major types of phosphatic fertilizers used in agricultural production. Available and total phosphorus are distinguished, providing a basis for assessing soil phosphorus status. The behaviour of phosphate fertilizers after application is considered in relation to their efficiency and crop uptake. The residual value of phosphatic fertilizers is also discussed, highlighting the continuing contribution of applied phosphorus to subsequent crops. Overall, the chapter emphasizes efficient phosphorus management to improve nutrient availability, fertilizer-use efficiency and sustainable crop production in irrigated soils.

Phosphorus (P) is a critical nutrient in crop production, due to its low bioavailability in soils (Feng et al., 2004). Phosphorus is the vital component of DNA, RNA, ATP and photosynthetic system and catalyses a number of biochemical reactions from the beginning of seedling growth through to the formation of grain and maturity. Many factors influence soil P availability like type of parent material from which the soil is derived, degree of weathering and climatic conditions. In addition to this, erosion, crop removal and phosphorus fertilization and soil phosphorus levels also affect P availability in soil. Rock phosphate is the key raw material used for manufacturing phosphatic fertilizers on which the food production depend.

Liebig (1840) on the basis of soil and plant analysis deduced the phosphorus requirement of plants. J.B. Lawes conducted series of field experiments to improve the fertilizer value of common sources of phosphorus such as bone meal, apatite, rock phosphate. Lawes (1843) produced super phosphate by treating apatite mineral containing phosphorus with sulphuric acid. He also stated that the phosphorus present in bones of higher animals can be made available by treating with sulphuric acid.

Phosphorus is the second most deficient nutrient in the world. Annual application of phosphorus fertilizers to crops is 36 million tons of which

1.32 m tones are consumed in India. Most of the arable soils in tropical and subtropical regions are deficient in phoshphorus, but the response of crops to phosphorus is uncertain. Phosphorus concentration in plants ranges from 0.1 to 0.4 per cent.

10.1 Different practices for different purposes

There are so many different practices used in erosion control that to describe them needs some form of grouping. For a long time mechanical protection was used to describe all the methods which involved earth moving, such as digging drains, building banks, levelling sloping land, and so on. Anything else was lumped together under biological methods for want of a better title.

This is appropriate for large mechanized farms where the approach is to use machines to do the earth-moving and follow up with improved farming methods. But this division does not suit the concept of erosion control through better land husbandry supported by mechanical protection, and the division is artificial when we start talking about progressive terracing using grass strips or live hedges.

An approach more suited to today’s thinking is to group methods and techniques according to their main objective. All have an element of saving soil loss, but an important difference is the handling of surface runoff. This chapter identifies three kinds of water management objective and two types of soil management on sloping land.

The major components of soil consisting with mineral and organic matter, water and air produces a three phase systems of solid, liquid and gas. Many of the soil properties influencing crop growth and other uses depend mostly on the relative proportions of these components as well as the size, shape and arrangements of the solid matters. The physical properties of soil have strong significance in sustaining agricultural productivity. Fertiliser alone or in conjunction with suitable crop varieties and plant protection measures cannot be sufficient towards improving crop productivity unless the soil physical properties are maintained at satisfactory level. Improvement and restoration of physical properties in soil are necessary for protection of soil resources against degradation. The physical properties of soil discussed in this chapter includes soil densities, texture, structure, porosity and consistency of soils and colour of the soil.

Soil texture and mechanical analysis: The chemistry of the mineral framework was explained in Chapter II. Its physical properties are quite as important- When all the extraneous matter is removed from the soil we are left with a collection of particles of various sizes. These particles are not spherical in shape, but most of them are nearly so. At any rate the discussion is very much simplified if we suppose that they are spherical and the arguments advanced are equally applicable if the shape deviates from the spherical.

Through green revolution, we have developed high yielding varieties albeit with high nutrient requirements putting much more reliance on chemical fertilizers. The major challenge facing plant biology right now is to improve crop production and to feed an expanding world population. This is against a background of pressure on agricultural land use and climate change having negative impacts on growing conditions. The adverse effects of agriculture, and specifically fertilizer use, include damage to the environment, a large carbon footprint for the manufacture and use of agrochemicals, and the utilization of non-renewable resources. One solution is to increase the area of land for agriculture, as well as increasing production while maintaining the current rate of inputs; however, this is predicted to have substantial negative impacts on the environment (Tilman et al., 2002), is unsustainable in terms of phosphate use, and would have a huge economic footprint in terms of energy demands for nitrogenous fertilizer production. The challenge is to increase yield, decrease inputs, and improve resistance to abiotic and biotic stresses. Improving crop nutrient use efficiency ideally requires an understanding of the whole system, from the macro (agro-ecosystem) to the molecular level.

Laboratory pipettes are classified by their method of liquid transfer. There are two types of pipette one is plastic which is made up of polystyrene and are essentially disposable and second one is glass pipettes are very resistant to chemicals. Glass pipette can be used frequently by washing, sterilising and dry heat sterilisation is also available. Some of the common types of pipettes are using in laboratory such as serological, volumetric, micropipettes, multichannel, and Pasteur pipettes. Serological and graduated pipettes are used for transferring various volumes, while micropipettes and volumetric types of pipettes are only considered for precise measurement and transfer. Multichannel pipettes are used for dispensing into multiple wells, and Pasteur pipettes are simple for transferring small amounts.
1. Serological Pipettes
• Also known as graduated pipettes, made of glass or transparent polystyrene they are calibrated with markings to measure and dispense varying volumes.
• Appropriate for cell culture applications, transferring liquids and mixing.
2. Multichannel Pipettes
• It is design to transfer multiple samples at once, often used for 96 well plates or pcr tubes.
• It can be manual or automated, with multiple heads for faster dispensing.
3. Volumetric Pipettes
• It is designed to supply for single and particular volume of liquid.
• Marked by single graduation for an exact volume, such as 1, 5, 10, 25, and 50 mL.
• Used in chemical reactions and analysis where accuracy is crucial.

This chapter introduces plant analysis as a means of determining crop nutrient status and diagnosing nutritional deficiencies. It explains the selection of representative plant tissues at suitable stages of growth, followed by washing, drying, grinding, digestion and elemental estimation. Recommended tissues and sampling stages are provided for cereals, pulses, oilseeds, fibre crops, vegetables, ornamentals and fruit crops. Procedures are included for estimating nitrogen, phosphorus, potassium, sulphur, boron, zinc, iron, copper and manganese in plant samples. The chapter stresses that reliable interpretation depends on correct tissue selection, careful sampling and freedom from contamination. It thereby connects laboratory measurements with crop nutrition and fertilizer management.

4.1 Sampling and Preparation for Analysis

The determination of nutritional need of crops is an important aspect of nutrient management of any plant analysis programme. The need of fruit plants for mineral nutrients differ from those of annual crop species in a number of ways, many of which are related to the perennial nature of tree crops. In perennial tree crops, there is a need to supply nutrients both for ultimate fruit production, the fruits and the vegetative organs, which persist from year to year. The need for leaf analysis in perennial horticultural crops and forest trees has proved its superiority over soil diagnostic methods. This is essentially because of their deeper root system and the fact that nutrients supplied in one year may have its effect on both the nutrition and crop production in following years. However, it is largely being used not as an alternative method to soil testing, but as a supplement to soil testing. Results of foliar analysis are usually interpreted using the critical nutrient level (CNL) approach. Accurate interpretation of foliar analysis using the CNL approach is possible only when sampling is restricted to the same growth stage at which standard reference values have been established (Beaufils, 1971, 1973). The general purposes of plant analyses are:

Accumulation of nutrient elements in plant tissues indicates the accessibility of the concerned elements from the soil to the plant. Although different plant species and even different varieties of the same species may vary in their nutrient requirements, composition of a part or of the whole plant may well be adopted as a guideline to support the soil-test results for factual assessment of soil’s nutrient supplying power.

6.1 Introduction

Water deficit stress is a serious and frequently encountered abiotic stress in the terrestrial surface. Its deleterious effects on plant growth and productivity are well documented. Plant responses to water stress are believed to be complex as these operate at various levels of plant organization. Several in built physiological and biochemical mechanisms provide resistance to plants against stress. An understanding of the processes linked to these mechanisms is vital for optimizing crop growth and productivity under stress. Plants respond and adapt to water stress by altering cellular metabolism, thus invoking stress tolerance. Alteration in endogenous concentrations of growth regulators along with accumulation of osmolytes, modifications in antioxidant cascade, changes in protein profiles and induction of gene expression in plants under stress are important characteristic metabolic changes that invoke stress tolerance at the cellular level. Alteration in endogenous concentrations of plant bio-regulators under stress helps plants through better turgor maintenance and efficient water usage by influencing stomatal functioning, hydraulic conductivity and morphological adaptation. Progress made in plant adaptation to water stress is an outcome of advances made in analytical techniques on endogenous growth regulator analysis and powerful and reliable molecular and genetic techniques.

Introduction
Plant breeding and genetics are at the forefront of agricultural innovation, playing a crucial role in enhancing crop traits to meet the ever-growing demands for food, fiber, and fuel. This chapter delves into the scientific principles, methods, and modern advancements in plant breeding and genetics, providing a comprehensive understanding of how these disciplines contribute to global food security and environmental sustainability. The chapter begins by exploring the fundamental principles of plant breeding, including heredity, genetic variation, selection, and hybridization. These concepts form the foundation for developing new plant varieties that exhibit desirable traits such as improved yield, disease resistance, and environmental adaptability. The importance of genetic variation is emphasized as a key driver of plant improvement, with discussions on the sources of genetic variation, the role of germplasm resources, and the impact of genetic diversity on plant adaptation. As the chapter progresses, various breeding techniques and strategies are examined, including mass selection, pedigree breeding, backcrossing, and markerassisted breeding. These methods are crucial for developing new plant varieties that can withstand the challenges posed by climate change, pests, and diseases. The chapter also addresses the role of genomics in plant breeding, highlighting the significance of genomic selection, gene editing, and bioinformatics in accelerating the breeding process and enhancing crop traits. The chapter further explores the controversial topic of genetically modified organisms (GMOs), discussing the principles of genetic engineering, the rise of genetically modified crops, and the associated controversies and concerns. The importance of GMOs in addressing global food security and environmental challenges is also discussed, providing a balanced perspective on their potential benefits and risks. The chapter concludes by emphasizing the critical role of plant breeding and genetics in ensuring food security and combating global warming. By developing climate-resilient crop varieties, improving water efficiency, and enhancing disease and pest resistance, plant breeding and genetics can contribute to sustainable agricultural practices that reduce greenhouse gas emissions and conserve natural resources

Plant Growth Promoting Rhizobacteria (PGPR) are root-colonizing bacteria that form symbiotic relationships with many plants. The name comes from the Greek rhiza, meaning root. Though parasitic varieties of rhizobacteria exist, the term usually refers to bacteria that form a relationship beneficial for both parties (mutualism). They are an important group of microorganisms used in biofertilizer. Biofertilization accounts for about 65% of the nitrogen supply to crops worldwide. The term PGPRs was first used by W. Kloepper in the late 1970s and has become commonly used in scientific literatures. PGPRs have different relationships with different species of host plants. The two major classes of relationships are rhizospheric and endophytic. Rhizospheric relationships consist of the PGPRs that colonize the surface of the root, or superficial intercellular spaces of the host plant, often forming root nodules. Endophytic relationships involve the PGPRs residing and growing within the host plant in the apoplastic space.Some common examples of PGPR genera exhibiting plant growth promoting activity are: Pseudomonas, Azospirillum, Azotobacter, Bacillus, Burkholdaria, Enterobacter, Rhizobium, Erwinia, Mycobacterium, Mesorhizobium, Flavobacterium, etc.An ideal PGPR should possess high rhizosphere competence, enhance plant growth capabilities, have a broad spectrum of action, be safe for the environment, be compatible with other rhizobacteria, and be tolerant to heat, UV radiation, and oxidizing agent.

The essential plant nutrients, or essential elements, are listed in the Table 41. It enumerates 16 chemical elements of which the essentiality for plant growth and reproduction has been established according to the criteria formulated by D.I. Arnon and P.R. Stout, 1939. This listing has existed since 1954 with chlorine as the latest addition (cited by Hopkins 1999).

These plant nutrients are classified into various groups:

1.    Major elements and trace elements : Of the 16 listed, 9 are major elements or macronutrients and 7 are trace elements or micronutrients. Major elements are those which are needed by plants for their growth and reproduction in relatively large amounts while trace elements are needed in smaller amounts compared to the former. The major elements are further sub classified into structural elements (carbon, oxygen and hydrogen), primary macronutrients (nitrogen, phosphorus and potassium), and secondary macronutrients (calcium, sulfur, and magnesium). Micronutrients are Zn, Cu, Mn, Fe, Mo4 and boron (Table 41).

7.1. Introduction

Like all other living organisms such as humans, animals, and microorganisms, plants also need elemental nutrients for their growth and development. They assemble the nutrients from soil, water and air. However, to obtain economical crop yield, nutrients are also supplied to the crops from external sources such as chemical fertilizers and manures and using biofertilizers. It is the present-day need to handle the soil fertility status in a more realistic and careful way to obtain maximum crop harvest. Under poor management practices, soil may become infertile and loose its importance in agricultural use. In modern days, huge food demand for the burgeoning human population does not permit to show luxury to use only fertile soil. Moderately fertile soil or even degraded soil should also be managed properly so that they may be used to grow crops. For this, plant nutrients status of the soil plays a significant role along with other soil properties. For sustainable soil fertility management, parameters such as crop to be raised, its nutrient demand at various growth stages, current nutrient status of the soil, amount of nutrient application based on the soil testing results etc are important to be considered. Balanced nutrition to the plants is the prerequisite to obtain maximum benefit. If nutrients supplied to the plants are low in quantity than their requirement, crop production is lowered down. Similarly, if the nutrients are provided in more amount in the soil or unbalanced way through fertilizer or manure applications, total crop yield is suffered. It is a very common example that excess of phosphorus leads to zinc deficiency in most crop plants and it has been observed that excess N is responsible for potassium starvation in potato. Again, excess of iron, manganese, zinc, copper shows plant toxicity. Addition of nutrients to soils in excess also causes environmental pollution when the excess nutrients are lost from soil by leaching, surface run-off and volatilization. Unscientific way of soil fertilization leads to increasing cost of cultivation and imparts adverse effect to the environment instead of doing any good. Therefore, one should have a clear knowledge on soil fertility to obtain a sustainable productivity.

Introduction
Plant protection is a critical component of modern agriculture, aimed at safeguarding crops from diseases, pests, and weeds that can significantly impact yield and quality. Chapter 10 explores the science of plant protection, focusing on the various disciplines that contribute to maintaining healthy crops and ensuring food security. The chapter begins with an overview of plant pathology, the study of plant diseases caused by pathogens such as fungi, bacteria, viruses, and nematodes. Key principles of plant pathology are discussed, including the nature of plant diseases, their modes of transmission, and the factors that influence disease development. This section also highlights the importance of accurate disease diagnosis, which is essential for implementing effective prevention and control measures. Entomology, the study of insects and their interactions with plants, is another crucial aspect of plant protection covered in this chapter. The principles of entomology are examined, with a focus on the identification and management of insect pests that threaten crops. Various pest management strategies, including biological, chemical, and cultural methods, are explored, emphasizing the need for a holistic approach to pest control. Integrated Pest Management (IPM) is a central theme in plant protection, combining multiple strategies to manage pests in an environmentally sustainable manner. The chapter discusses the advantages of IPM, such as reduced reliance on chemical pesticides and minimized environmental impact, as well as the challenges associated with its implementation. Integrated Disease and Pest Management (IDPM) is also introduced, which integrates plant pathology and entomology principles to develop comprehensive management strategies that address both diseases and pests. The chapter further explores the role of pesticides in plant protection, including their benefits and potential risks. Safety measures for pesticide use are emphasized to protect both human health and the environment. Integrated Weed Management (IWM) is also discussed as an essential component of plant protection, with strategies for managing weeds that compete with crops for resources. The importance of plant protection sciences in food security is highlighted, particularly in the context of pest management, disease control, and weed management. These disciplines contribute to sustainable agriculture by enhancing crop yield and quality while promoting environmental sustainability.