eChapters

4.1 Research Setting

In any social science research, it is hardly possible to conceptualize and perceive the data and interpret the data more accurately until and unless a clear understanding of the characteristics in the area and attitude or the behavior of people is at commend of the interpreter who intends to unveil an understanding of the implication and behavioral complexes of the individual who live in the area under reference and form a representative part of the larger community. The socio-demographic background of the local people in a rural setting has been critically administered in this section. A research setting is a surrounding in which input and elements of research are contextually imbibed, interactive and mutually contributive to the system performance. Research setting is immensely important in the sense because it is characterizing and influencing the interplays of different factors and components.

A reservoir stores water behind a dam and can reduce downstream flooding by temporarily retaining part of the incoming flood volume. Its effectiveness depends on available storage, inflow characteristics, outlet capacity, operating rules, forecasting information, and the timing of releases. Reservoirs may also serve irrigation, municipal supply, hydropower, navigation, recreation, and environmental purposes, making their planning a multipurpose undertaking. This chapter introduces reservoir terminology, classifications, storage zones, capacity determination, site selection, sedimentation, and operating principles. It explains how flood-storage space modifies peak discharge and discusses reservoir routing, release regulation, design limitations, safety considerations, and the role of coordinated reservoir systems in basin-wide flood management.

Introduction

Resource Conserving Technology refers to any management approach or technology that increases factor productivity including land, labour, capital and inputs. The resource conserving technologies (RCTs) involving no or minimum tillage, direct seeding, bed planting and crop diversification with innovations in residues management are the possible alternatives to the conventional energy and input-intensive agriculture. The RCTs with innovations in residue management avoid straw burning, improve soil organic C, enhance input efficiency and have the potential to reduce GHGs emissions (Pathak et al., 2011). Conservation agriculture is one the effective Resource Conservation Technologies, which is based on three principles which are minimum soil disturbance, maintenance of permanent soil covers by the use of crop residues and cover crops and diverse plant associations which included crop rotations. Globally, Conservation Agriculture is being practiced in about 125 M ha area. USA with 26.5 M ha contributes to the major CA-practicing countries followed by Brazil (25.5 M ha), Argentina (25.5 M ha), Canada (13.5 M ha) and Australia (17.0 M ha). However, in the context of climate change to increase the production and productivity, India’s CA adoption is still in preliminary phases in area of 1.5 million ha with adoption of Zero Tillage (Jat et al., 2012, www.fao.org/ag/ca/6c.html). The major CA-based technologies being adopted is zero-tillage (ZT) wheat in the rice-wheat system of Indo-Gangetic Plains.

In the earlier chapter the major soil vulnerability namely, water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, landslide and abandoned mines were described. In this chapter two more parts, Importance of remote sensing (RS) and geographical information system (GIS) in soils and Watershed management are also included after seeing their importance in agriculture and soils. Restoration means that by various actions or processes to return something to its original owner, site, place, or condition. In this context our aim is to restore our mother soil from various vulnerabilities by different actions and processes to its natural and original condition up to the maximum possible extent. Management is defined as the scientific methods to attain targeted production through planning, organising, training and fixing targets for employees. Therefore, after the restoration, soils should be managed according to scientific method of action by scientifically selected and trained staff to perform the assigned responsibilities, effectively, efficiently and rapidly within stipulated period. On these guidelines restoration and management of vulnerabled soils is described here,

Abstract

In South India, tanks system is quiet ancient, meant for storing and supplying water towards multifunctional needs of the people. In Tamil Nadu, there are around 39,000 tanks with varying size and types. Over past few decades, irrigation rely on stable and reliable groundwater resources like dug and deep bore wells, consequently tanks lost their significance. Moreover, excessive siltation, improper maintenance and illegal encroachment further degraded the system. The deterioration factors are broadly categorised into problems in catchment, feeder channels and head works which eventually resulted in loss of storage capacity. The present study chiefly narrates an indirect method of estimating the loss in storage capacity of tanks and the catchment problem, especially soil erosion and its induced siltation of tanks in the downstream using geoinformatics technology. Using remotely sensed satellite data, by measuring surface area of tank loss in storage capacity was estimated through a linear model. Using Digital Elevation Model derived topographic wetness indices data, the catchment problem especially, soil erosion areas were identified and remedial measures were suggested. Under prevailing water crisis, it is essential to rehabilitate the tanks through which the surface water potential can be improved along with quality as well.

Introduction

The resource conservation technologies (RCTs) is primarily focussed on resource savings through minimal tillage, ensuring soil nutrients and moisture conservation through crop residues and growth of cover crops, and adoption of spatial and temporal crop sequencing. These practices have long been practised by the farmers in the Indo Gangetic Plains (IGP) but it got eroded in recent times due to various geo-socio economic- political reasons. This region (10.5 million ha) comprises of Punjab, Haryana, Uttar Pradesh, Himachal Pradesh, Bihar and West Bengal and have major share in production of rice and wheat due to adoption of green revolution technologies followed by area expansion. It has been reported that rice-wheat system has strained the natural resources of this region (Swarup and Singh, 1989; Kumar and Yadav, 1993; Lal et al., 2004). In present scenario there is little scope to meet future target by earlier approaches like area expansion and intensive use of natural resources. Therefore, RCTs can be regarded as energy, water and labour efficient system to sustain soil health and production environment and produce more at less cost (Jat et al., 2012; Gathala et al., 2011b).

Major emphasis is given upon the RCTs components like zero/reduced tillage, direct seeded rice, crop residue management and crop diversification. However, other RCTs like site specific nutrient management, leaf colour chart, laser land leveller, nutrient use efficient genotypes, integrated crop and pest management provide options to the farmers as per their resource endowment.

A brief description of IGMC is given in Para 6.6 with details of the canal sections. Here an attempt is made to review the hydraulic performance of the Main Canal.

7B.1 Study of Flow Characteristic of the Main Canal

The main canal is designed for a maximum discharge of 524 m3/s at head i.e. at Km. 0. Large of number of branches, distributaries and minors off take from the main canal at different location all along the canal. These are shown in the L- section, Figure 7B.1 and a statement off taking canals is given Table 7B.1. Many distributaries such as lift canals have been planned subsequently. Also discharges of few off taking channels have been changed. A clear and updated data are not readily available. So data available are indicated in the Table and plotted in the L - section. A half bottom plan of the canal is also shown in Figure 7B.2

Under natural conditions, the largest source of labile carbon (C) inputs to the soil is root exudates (Bertin et al., 2003; Hutsch et al., 2002; Kuzyakov 2002). Roots exude a variety of low-molecular weight organic compounds, including sugars, amino acids, organic acids (Bertin et al., 2003), but also contain hormones, vitamins, amino compounds, phenolics and sugar phosphate esters (Uren, 2001). These compounds are rapidly metabolized; for example, Hutsch et al., (2002) found that 64–86% of maize root exudates were respired by soil microorganisms. The effect of root exudates depends on the distance that they can diffuse away from rhizoplane (Gupta and Mukerji, 2002).

Rhizosphere

The term Rhizosphere was introduced by the German scientist, Hiltner in 1904. It is region of the soil, which is subjected to the influence of plant roots. It is the unique environment under the influence of plant roots. The roots of plants are not only involved in the uptake of mineral nutrients and water for plant growth, but they also release a wide range of organic compounds in the surrounding soil.

Introduction

The rhizosphere plays a pivotal role in the boundary where biological and chemical activities profoundly impact various landscape and global-scale processes. Understanding these processes is crucial for maintaining planetary health and sustaining the organisms inhabiting it (Morrissey et al., 2004). To enhance the yield potential of staple food crops, leveraging the root systems of plants becomes essential to meet the anticipated doubling of global food demand in the future (Gewvin, 2010; Zhang et al., 2010). Amidst the challenges posed by global climate change and the burgeoning global population, there’s an increasing need for greater productivity from cultivated food, animal feed, and fibers on less favorable and often infertile lands—conditions already prevalent in many developing nations (Tilman et al., 2002). Advancing our understanding and control of rhizosphere processes stands as a critical frontier in research for the next decade.

3.1. Introduction

Rice is grown in varying geographical locations and climatic situations. Most of the rice area lies between the equator and 400 N latitude and between 700 and 1400 E longitude. It grows well from tropical to sub-tropical warm and temperate climatic regions up to 400 S and 500 N of the equator. However, the highest yields are obtained in the region between 300 and 450 N of the equator. The average yield generally increases as the countries are situated further away from the equator (Chatterjee and Maiti, 1985). In India, rice grows in regions from 80 N to 350 N latitudes under widely varying conditions of the land, rainfall, altitude and climatic conditions. It is grown at the sea level in river deltas as in parts of Kerala, as deepwater in states of West Bengal, Assam and Bihar; at high altitudes of 914 to 1524 m or even more as in Kashmir, and in the slopes of the Himalayas. A temperature range of 200 C to 37.70 C is required throughout the life period of rice crop.

1.1. Introduction: India’s present population, growth rate & projections

India is the second-most populous country in the world after China with its population of about 1.38 billion in the year 2020. The Population Division under the Department of Economic and Social Affairs, of the United Nations, has projected the country’s population to be growing to about 1.50 billion by the year 2030, and 1.64 billion by 2050, of course with its decreasing annual growth rate from 1.04 to 0.25% or so during the period of next thirty years (Fig. 1.1; UNDESA, 2019). The projection says the Indian population will exceed China by the year 2030 even with its decreasing rate i.e. India will be the most populous country by then. As agriculture and allied sectors are the backbone of this country and the largest livelihood source, it support this growing human and livestock population with diversified natural resources and varied agro-climatic conditions. However, the sustainability of agricultural production should be maintained in the face of perturbation and stress on the agro-ecosystem especially the degraded natural resource base and changing climate.

River-training works guide and regulate the flow of a river to achieve a stable channel alignment, protect banks, improve navigation, prevent erosion, and reduce flood damage. Rivers naturally change their course through sediment deposition, bank cutting, meandering, and variations in discharge. Engineering interventions must therefore account for hydraulic forces, sediment movement, channel morphology, and long-term river behaviour. This chapter defines river training and explains its objectives, benefits, limitations, and key design principles. It discusses guide banks, groynes or spurs, embankments, revetments, pitching, launching aprons, cut-offs, and related protective works. It also considers structural placement, classification, construction materials, maintenance, and environmental consequences.

Agricultural robotics addresses labour shortages, production demands, environmental concerns and the need for greater operational precision. This chapter examines unmanned aerial vehicles, autonomous ground machines, robotic manipulators, greenhouse robots and livestock systems. Enabling technologies include multimodal sensors, computer vision, navigation, control systems and artificial intelligence. Applications extend from land preparation, sowing and crop monitoring to weeding, spraying, irrigation, harvesting and post-harvest processing. Emerging approaches such as reinforcement learning, digital twins, swarm coordination and soft robotics are also explored. Technical reliability, high investment, connectivity, labour displacement and data ownership remain important barriers. Future development must prioritize accessible, affordable and farmer-oriented automation platforms.

Introduction

More than three billion people are at risk of poverty due to land degradation caused by humans (Kansanga, Kerr, Lupafya, Dakishoni, & Luginaah, 2021). The implementation of Soil Sustainability Management (SSM) practices remains low among smallholder farmers, despite the fact that SSM has developed as a generally accepted technique to tackling soil degradation in Agro ecosystems (Kansanga et al., 2021). When it comes to food, water, energy, climate, biodiversity, and the provision of ecosystem services, soil plays a pivotal role in addressing these global environmental sustainability concerns (McBratney, Field, & Koch, 2014). The availability of food, fiber, clean water, and a varied landscape are all dependent on healthy soil.

In spite of the fact that the forests are the wealth of a nation and play a vital role in the economy of the country, not much attention has been paid to their promotion, protection and conservation. The forests of India have been reduced to 19.27 per cent (Gupta and Khajuria, 2000) and/or 23 per cent including 20.55 per cent forest cover and 2.48 tree cover (Sharma, 2005). It is much less than as prescribed in the National Forest Policy (1952), according to which onethird i.e. 33 per cent of the total land area of the country must be under forest.

Introduction

At a present time, Organic farming has an important priority in different areas due to worldwide in look of the growing need for pure and nutritious agriculture food and keep up the feasible and environmental pollution on long time associated with indiscriminate use of chemical fertilizer. The use of synthetic inputs in crop cultivation is necessary to meet the growing need for agriculture food in world. The natural fertilizers are made containing living or veiled cells or their strains of N2 fixation, P2 O5 solubilization bacteria. The biofertilizers are used for seed cramming, soil or vermicomposting region with the objective of rising quantity of such microbes and further those microbial processes which augment the obtainability of nutrients that can be easily digest by plants. Biofertilizers are playing higher role in increase soil productivity by f ixing atmospheric nitrogen, both, in relationship with plant roots and without it, solubilise and insoluble soil phosphorus and produces many plant growth substances in the soil.

Introduction

Use of FYM, crop residues, leaf fall, root deposition etc. has been part and parcel in agriculture. These material undergoes microbial decay over the time slowly and the major portion of it finds way back to the atmosphere. Not only that, residue burning traditionally provides a fast way to clear the agricultural field of residual biomass, facilitating further land preparation and planting. However, in addition to the loss of valuable biomass and nutrients, biomass burning leads to release of toxic gases including GHGs.

Role of Bioinputs explains how biological inputs contribute to soil health, plant performance, ecological interactions, and long-term agricultural sustainability. It introduces the conceptual framework and classification of bioinputs before examining their effects on soil microbial populations, enzyme activities, organic carbon, nutrient availability, soil structure, rhizosphere activity, and soil-fertility indicators. The chapter further explores plant–microbe interactions and plant–faunal relationships involving earthworms, beneficial nematodes, arthropods, microarthropods, protozoa, and the soil food web. By linking biological processes with physiological and agronomic outcomes, the chapter presents bioinputs as important components of resilient, ecologically balanced, and sustainable farming systems. across sustainable and natural farming systems.