eChapters

Introduction

Soil is a dynamic natural body, characterized by high degree of spatial variability due to combined effect of physical, chemical or biological processes that operate with different intensities at different scales (Goovaerts 1998). Reports have shown that there is large variability in soil properties, crop yield, disease, weed etc., not only in large-sized fields (Godwin and Miller 2003,Vrindts et al. 2005), but also in small-sized fields (Bhattacharya et al. 2008). Therefore, knowledge of hydro-physical properties of soils is crucial for management practices for all kinds of agricultural practices for efficient utilization of input resources. Plant growth and development is highly related to soil hydro-physical properties, which not only depend on soil intrinsic textural and chemical characteristics (Hamza and Anderson 2005) but also on soil management.

Soil physical properties which change with the variation in soil structure include bulk density, total porosity, pore geometry (size distribution, shape, continuity and tortuosity), penetration resistance and aggregate stability, consequently affecting soil hydraulic properties such as water retention characteristics, plant available water capacity, infiltration capacity and saturated hydraulic conductivity. These soil properties are dependent on seasonal climatic conditions, management practices, crop development and biological activity (Reynolds et al. 2007). The hydro-physical properties of soils, i.e., water retention and water permeability in both saturated and unsaturated zones not only shape soil water balance but also decide the conditions for plant growth, development and yield. They also determine water availability for the plant root system and the transfer of water with chemical compounds dissolved in it into deeper layers.

Vector data analysis is performed to convert raw input vector data to output that provides new and meaningful information which ultimately supports decision making and disclose hidden patterns. There are various techniques to analyse vector data like buffering, intersect, union, and so on. Some of the most commonly used techniques with their R-code examples are explained in this chapter.

First of all, you need to import all the packages which are required for performing this exercise. These packages include rgdal and sp for importing and re-projecting vector data as well as raster and rgeos for performing vector analysis operations.

Vector data consists of points, lines and polygons with x, y coordinates known as vertices representing the geographic location i.e. latitude and longitude. Vector data depicts the shape of the spatial feature. Points consist of single x, y locations. Examples of points are tower location, sampling location, etc. Lines represent 1 – dimensional features like roads, streams, etc., and are composed of many or at least two connected points or vertices. Polygons denote 2 – dimensional features like boundaries with three or more vertices that are connected and closed. The vector data are represented in the following figure (fig. 5.1).

Ever increasing use of chemical fertilizers without an adequate organics has deteriorated the fertility and productivity of soil and also aggravated multi-nutrient deficiencies in soil and plant system (Gupta and Singh, 2006). Further, change in the cropping pattern, intensive cultivation and indiscriminate use of pesticides with an objective to obtain more and more crop yield, has not only made agriculture a profitable commercial venture but has also brought in several problems of pests and diseases, and ecological crises. As the nitrogenous fertilizers are soluble and as such they may leach down into ground water as for example presence of nitrate in underground waters of some parts of UP, Haryana, Punjab, Gujarat, has become a potent source of blue baby disease (Gupta, 2005).

Importance of virtual water in agriculture
Virtual water is with the meaning of the concept when water embedded in goods and services and is exchangeable from one country to a different. The country is under water-scarce; the water that’s ‘saved’ is often used towards other ends. Water-scarce countries (like Israel) discourage the export of relatively water-intensive crops (like orange, water melon) precisely to stop large quantities of water from being exported to different parts of the earth. In recent years, the concept of virtual water on trade has gained weight both within the scientific also as restricted by the political debate. The notion of the concept is ambiguous. It changes between an analytical, descriptive concept and a political induced strategy. As an analytical concept, virtual water trade represents an instrument that permits the identification and assessment of policy options not only within the scientific but also within the political discourse. As a politically induced strategy, the question of virtual water trade are often implemented during a sustainable way, whether the implementation are often managed during a social, economical, and ecological fashion, and that countries the concept offers a meaningful option. the info that underlie the concept of virtual water can readily be wont to construct water satellite accounts and brought into economic models of international trade like the Computable General Equilibrium of Global Trade Analysis Project such a model are frequently wont to study the economic implications of changes within the water system or water policy, also because the water resource implications of economic development and trade liberalization. The data pertaining to virtual water is product of GTAP.
Keywords: Virtual water; foodstuff and food; water content in different food materials; water deficit areas;

Vulnerability of Soils

Soil vulnerability, Soil degradation, soil vulnerability index

Water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, lowering of water table, over grazing, deforestation, landslide, loss and change in soil biodiversity, Abandoned mines etc.

Soil vulnerability, Soil Degradation, Soil Vulnerability Index

The terms vulnerable and vulnerability are now bites of every one and used for everything. Vulnerable means to the possibility of attack or harm by any mean. Human beings are vulnerable to Covid-19, computers are vulnerable to virus, softwares are vulnerable to hackers and attackers to control system, environment is vulnerable to pollution. Vulnerabilities refer to the lack of ability to resist the effects of the aggressive environment. Soils are vulnerable to numerous threats like water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, lowering of water table, over grazing, deforestation, landslide, loss and change in soil biodiversity etc. However, this book will describe some of the most pertinent vulnerabilities for soils.

Introduction

Waste management and soil sustainability are two critical aspects of environmental conservation and sustainable development. As our global population continues to grow and consume resources at unprecedented rates, it becomes increasingly important to manage waste effectively and preserve our soil health and productivity. Anthropogenic activities have consistently produced waste. The World Bank predicts that worldwide garbage production will rise to 70% by 2050 if no substantial actions are taken (Ghosh, 2020). This was not a significant problem when the world’s population was small; however, it is acquired as a major concern with industrialization and urbanization revolution. Lack of proper waste management has caused pollution of water, land, and atmosphere, as well as a significant effect on human health (Raza et al., 2022a; Raza et al., 2022b).

3.1 Introduction

A Massive increase in population, urbanization and industrialization have led to an increase in the quantity and composition of waste. The waste is increasing day by day and is estimated to reach up to 2.2 billion tonnes by 2025, according to the reports by World Bank. It becomes a necessity for every nation to fore look upon the waste management system for their respective countries. From the collection, segregation, transportation, disposal all have become an important criterion to deal with. Among the available disposal options; the easiest and environment friendly is “Recycling”. 

Introduction

Over 250 million people are directly affected by land degradation worldwide. Each year 12 million hectares are lost to deserts. Only 11 % of the global land surface can be considered as prime or Class-I land.

India contains 2.4 % of world’s total land. Out of the total geographical area of 329 million ha of the country, land use statistics are available for about 93 % of the total area which comes around 306 million ha. The arable land (net area sown plus the current and other fallow lands) was estimated at 166.14 million ha (54.2%) while the area under forest was accounted at 69.02 million ha (22.6%). Land put to non-agricultural uses was estimated at 22.97 million ha (7.5%) and the barren and uncultivable land at 19.44 million ha (6.4%). Permanent pastures and other grazing lands where estimated 11.04 million ha. (3.6%), land under miscellaneous uses at 3.62 million ha. (1.2%) and the cultivable waste land at 13.08 million ha (4.5%). By summing up these figures, the reporting area comes out 306 million ha.

I. Definition of wasteland

Wasteland include degraded forest, overgrazed pastures, drought- struck pastures, eroded valley, hill slopes, water logged marshy lands, barren lands etc.

Different authors have defined wastelands as:

Land which is lying unproductive or which is not being utilized to its potential.

Land which is incapable of producing material or services of value (American Society of Soil science).

Land which has been abandoned and for which there is no further use (Mine spoils).

Land which produces less than 20% of economic potential. e) Land where no greenery can be sustained.

Land which is neither under forest cover or agricultural cover or assigned for specific purposes such as National park or National hydro power projects.

The Technical Task Group Report of the National Wasteland Board defines the wasteland due to different constraints.

Background and Technology Intervention

Andhra Pradesh is India’s fourth largest state in terms of area and fifth in terms of population. Its capital Hyderabad is one of the largest and fastest growing cities in Southern India occupying 650 square kilometers along the bank of Musi River. History says that, the fifth sultan, Muhammad Quli Qutab Shah established Hyderabad on the banks of Musi River in 1591 to avoid the acute water shortages experienced at Golconda during his rule. Today, due to rapid urbanization and increased economic activities, the river has become a receptacle of untreated domestic and industrial waste dumping out of Hyderabad. It is estimated that nearly 350 MLD (Million Liters a Day) of polluted water and sewage originating from the twin cities of Hyderabad and Secunderabad flow into the river. Though this river water which is at the downstream of the city remains highly polluted and considered a major disaster in Hyderabad, it is a significant resource for semi-arid and peri-urban population where the cultivation of fodder grass, paddy and vegetables have contributed largely to the household food security.

Water is precious, but it is a finite natural resource. Although it accounts for about three-fourth of the earthís surface yet very small fraction of it i.e., only 2.7 per cent of the global water is available as fresh water. Around 2.8 billion people live in areas of high water scarcity (Anonymous, 2014d). Out of the total amount of the fresh available water merely 30 per cent is withdrawn to meet the water requirements of the human and livestock population while the remaining 70 per cent is required to produce food crops that fuel human activities.

Plants and any from of living organisms cannot live without water, since water is the most important constituent about 80 to 90% of most plant cell.

2.1 Role of water in crop and crop production

(A) Physiological importance

•The plant system itself contains about 90% of water

•Amount of water varies in different parts of plant as follows

•Apical portion of root and shoot >90%

•Stem, leaves and fruits - 70 - 90%

•Woods - 50 - 60%

•Matured parts - 15 - 20%

•Freshly harvested grains - 15 - 20%

5.1 Sampling

There are different sources of water such as rain, streams, canals, lakes, tanks, ponds, large reservoirs, shallow and deep wells, shallow and deep tube wells, as well as sewage effluents and sea water. The composition of the different sources of water vary with the season, rate of flow, the extent of effluents from the industrial units and sewage effluents from the municipal area during rainy season, the river tank and pond water becomes salty and muddy due to soil erosion. The depth of ground water also varies with the seasons. The sources of water available to the farmer for irrigation of crops are generally few such as canal, shallow and deep wells, pumping sets, tube wells and runoff water collected in excavations along roads, natural drains and adjoining areas under impeded drainage. The composition of water also varies with the season. Whatever may be sources of water, the water sample is taken along with the soil sample to soil testing laboratory for its analysis by way of assessing the suitability of water for irrigation.

For drawing maximum benefit the samples taken be representative of the water in bulk and it should be collected in a clean vessel. One to three litres capacity plastic bottles duly washed with a detergent are satisfactory. However, before filling with water samples the bottles must be rinsed with water samples three times. The information such as farmers name, owner of pumping sets, date and month of sampling depth of ground water, crops and soils being irrigated, any specific agricultural or human problems encountered to be briefly recorded along with the name of village, block, tehsil and district. The water sample should be properly labeled and submitted to soil testing laboratory for its analysis.

A water budget quantitatively accounts for water entering, leaving and remaining within a defined agricultural or hydrological system. Comparable to a financial budget, it considers precipitation, irrigation, runoff, evapotranspiration, percolation and changes in storage. This chapter explains the climatic and soil-water budget, potential and actual evapotranspiration, water surplus, water deficit and moisture adequacy. It discusses how water-balance analysis supports irrigation scheduling, crop planning, drought assessment, rainwater harvesting and watershed management. Understanding the timing and magnitude of water availability helps farmers and planners select crops and management practices suited to local conditions. Water budgeting therefore provides a fundamental tool for climate-resilient and resource-efficient agriculture.

Water budgeting and its importance, methods of soil moisture estimation, evapo-transpiration and crop water requirement and effective rainfall Water budgeting and its importance, irrigation scheduling approaches
Water budgeting
Allocation of the water receipt including anticipated within the crop period and its detailed account of expenditure for efficient and profitable farm management is called as water budgeting.
Water budgeting may be for an irrigation system planned by irrigation engineers; may be for a canal or for an area (block) or may be for a farm according to the need and plan by responsible persons who plan the irrigation efficiency.
Importance of water budgeting
Efficient utilization of available recourse (water) for bringing more area under irrigation:
1. To increase the productivity of a region / farm.
2. To increase cropping intensity of a region / farm
3. To tide over some dry-spells
4. To reduce excess irrigation and losses caused thereby
5. To avoid run off losses
Irrigation scheduling
Irrigation scheduling is defined as frequency with which water is to be applied based on needs of the crop and nature of the soil.
Irrigation scheduling is nothing but number of irrigations & their frequency required to meet the crop water requirement.

Allocation of the water receipt including anticipated within the crop period and its detailed account of expenditure for efficient and profitable farm management is called as water budgeting.

Water budgeting may be for an irrigation system planned by irrigation engineers; may be for a canal or for an area (block) or may be for a farm according to the need and plan by responsible persons who plan the irrigation efficiency.

5.1 Introduction

A farm pond that collects and harvests in-situ rainfall as well as runoff from the catchment area can be used for many purposes: the most important of which is the supply of water to crops as supplemental irrigation. It is no doubt a viable source for integrated farming system. In addition, the water of the pond can be used for domestic and to some extent for the industrial uses. It is also a good source for recreational use. Total water demand of the pond including irrigation to different crops in different seasons, domestic and other non agricultural uses are to be assessed. While estimating the crop water requirement and irrigation requirement, various crops to be grown in the service area of the pond, their water requirements, crop duration, extent of coverage and water management practices followed are to be taken into consideration. Multiplying the irrigation requirement with crop coverage area, volumetric irrigation water requirement of crop can be found out. Summation of irrigation requirement of all crops grown in service area of the pond, gives total irrigation demand of the pond.

Farm ponds are normally used for irrigation to crops as well as to meet the live stock water demand. Normally the large live stocks like horse, cattle require 20 thousand litres of water per head per year whereas the small live stocks like sheep, goat, pigs require 2 thousand litres of water per head per year. Adding the irrigation demand to the livestock demand, total water requirement of the pond is calculated. In addition to this, if the pond water is used for industrial, domestic and other sectoral purposes, then water used in all such sectors are to be added to irrigation and livestock demand to estimate the total water demand of the pond.

Introduction

Normally, water is a liquid substance made of molecules containing one atom of oxygen and two atoms of hydrogen (H₂O). Pure water has no colour, no taste, no smell, turns to a solid at 0°C and a vapour at 100°C. Its density is 1 gram per cubic centimetre (1 g/cm₃), and it is an extremely good solvent.

An extraordinary property of water is its ability to dissolve other substances. There is hardly a substance known which has not been identified in solution in the earth's waters. Were it not for the solvent property of water, life could not exist because water transfers nutrients vital to life in animals and plants.

A drop of rain water falling through the air dissolves atmospheric gases. When rain reaches the earth, it affects the quality of the land, lakes and rivers.

10.1. Introduction

Irrigation facilities are created by the Government at huge cost for supplying water to the farmers for raising crops to increase agricultural production. The major and medium irrigation projects are planned, constructed, managed, operated and maintained by the Irrigation Departments, wherein certain procedures and rules are evolved and followed to the delivery schedule of canals, frequency of supply and distribution of water to the farmers, and closing of canals. The creation of such facilities resulted in ushering the green revolution in the sixties and seventies in the production of food grains and also employment generation in the country, thereby improving the socio-economic condition of Indian farmers. However, optimized management of irrigation water is the key to the sustainable development of agriculture and livestock. Since management of water for irrigation is highly location-specific, depending upon agro-ecological and socio-economic conditions, type of irrigation project and land use pattern, it differs from project to project and region to region in the country.