eChapters

Hill cattle in Uttarakhand are multipurpose animals. They are used for milk, draft, manures and ceremonial purposes. Improvement for these attributes depends on definition and subsequent selection for various traits. Based on the criteria for improvement and detailed literature analysis, it is believed that the hill cattle of Uttarakhand is one of the potential population for milk in the state specially in the remote and high altitude areas.. Hill cattle have also been used for dairy improvement as a dam breed for crossbreeding in some cases in the state. It has been observed that hill cattle in the state mostly reared as dual purpose animal i.e milk and draft. Therefore, the hill cattle could be improved for both milk and draft. The aim of the present study is to know the status, characterstics and performance  and to suggest the possible options for improvement in milk productivity of hill cattle in the state.

Introduction

From the very early days human beings depend on animals and animal products for food and other requirements. In dairy and poultry farms high yielding animals are reared. These high yielding animals are produced by hybridization experiments. Previously the animals were developed basing on unscientific methods. Before the discovery of principles of heredity human beings have selected the animals with required characters and learned to develop the plants having the selected characters. This phenomenon is called Artificial selection. However, an increased knowledge of biology, especially genetics, has helped in improving the quality of animals and animal products as per the human requirements.

Introduction
 
Livestock sector plays an important role in Indian economy and is an important sub sector of India agriculture the contribution of livestock to gross domestic product was 4.7% in 2004-05 with 27% share in agriculture and allied sector. Milk production in India reaching a level of 91 million tones in 2004-05. It is estimated that in milk production 58% of milk was contributed by buffaloes with average lactation milk about 1300 kg. Some of the buffaloes produce as high as 4000 kg but their number is limited. India with 185 million cattle and approximately 98 million buffaloes possesses 20% of the world bovine and 14% of the cattle population. Buffalo population in the country has been increasing at a steady wait with slight increase in productivity. Highest increase in the past five years was observed in Haryana (25.1% ), followed by Uttar Pradesh (20.6%), Madhaya Pradesh (13.9%), Gujrat (13.6%), Uttaranchal (12.2%), Andhra Pradesh (10%) and Rajasthan (6.6%). Productivity per animal is very low mainly due to low genetic potential for milk production, near absence of the genetic improvement programmes, poor plan of nutrition and health measures. 

Dairy buffalo production has been a tradition in parts of the world like the Caucasian countries. Asia and Egypt, where fresh buffalo milk, dahi (cultured sour milk), ghee (butter oil) and yoghurt are popular. In Italy the dairy buffalo industry is flourishing thanks to the popularity of buffalo mozzarella cheese. Because of the market for Mozzarella, buffalo farming is a profitable enterprise and is carried out in an organized manner with modern equipment. In South American countries like Brazil and Argentina, buffalo reared for both milk and meat. In recent years buffalo milk and milk products, especially Mozzarella cheese, have become immensely popular and dairy buffalo production has founds its way into non traditional areas with the number of buffalo farms mushrooming.

The buffalo belonged to the Bovidae family, Bovinae subfamily and the scientific name is Bubalus bubalis. This is descended from the Bubalus arnee or wild Indian buffalo, and is widely dispersed throughout Southern Asia. The world population of buffaloes is approximately 204 million head: more than 98% are in Asia; 0.8%are in Africa, particularly in Egypt; 0.9% are in South America; and 0.2% are in Europe (FAO, 2024).

The countries with the largest numbers of dairy buffaloes are India, Pakistan, China, Nepal and Egypt. In Pakistan and Nepal there are more dairy buffaloes than dairy cows. Water buffaloes are the main source of milk in South Asia. India is the largest water buffalo milk producer compared to Pakistan, where buffaloes produce more milk than cattle.

 Scientific classification
 Genus: Bubalus 
 Species: bubalis
 Wild water buffalo: Bubalus arnee
 Domestic water buffalo: Bubalus bubalis
 Lowland anoa: Bubalus depressicornis
 Mountain anoa: Bubalus quarlesi
 Tamaraw: Bubalus mindorensis
 Cebu tamaraw: Bubalus cebuensis

Camels could be exploited for augmenting the country’s milk production capacity as a supplementary milk resource in India for the benefit of increasing human population. Since milk production potential of camels in India have remained unexploited and considering its therapeutic utility it can fetch good prices. Camels are raised for milk, meat, fibre (wool and hair), transport and other work; their dung is used as fuel. Milk is often the most important camel product and is the staple food of nomads.

The camel is an important species of the Indian fragile desert ecosystem, a proven icon of adaptation with its unique bio-physiological characteristics and has formidable ways of living in harsh situations of arid and semi-arid regions. The proverbial Ship of Desert earned its epithet on account of its indispensability as a mode of transportation and draught ability in desert. However, its utilities are subject to continuous social and economic changes. The camel has also played a significant role in civil law and order, defence and battles from the ancient times till date. Camels formed an important component of the Mauryan Army (C.322-232 BC) and continued through the Mughal period (1200-1700 AD) to the present times.

Camels across the world are reared for milk, meat, draught, race and tourism. They are distributed in the African, Arabian and south Asian countries.  Apart from this, a feral population exists in Australia and recent reports indicate that a few animals of the species are also being reared in Europe. The world camel population shows an increasing trend with 12.92 m in 1961 to  24.68 m in 2010 producing 0.38 m tonnes of meat and 2.36 m tonnes of milk per annum.  The top 20 camel rearing countries produce both milk and meat with the exception of India and Pakistan as per FAO. Contrary to this, the research articles and news reports indicate that the species in the two south Asian countries too produce both milk and meat.

The concept of capacity development is defined in various ways. Broadly, it is defined as a process by which skills, and knowledge are built, utilized, retained and nurtured with a view to provide an entity responding to a development challenge. Two components that are vital in any plausible definition of the concept are human skills (the ability to perform a task) and institutions (effectiveness and efficiency of organizations, systems, processes and procedures).

Important features

• Cattle produce 81% of world milk production, followed by buffaloes with 15 percent, goats with 2 percent and sheep with 1 percent; camels provide 0.5 percent. The remaining share is produced by other dairy species such as equines and yaks.

• About one-third of milk production in developing countries comes from buffaloes, goats, camels and sheep. In developed countries, almost all milk is produced by cattle.

• Milk from dairy species other than cattle represents 40 percent of milk production in Asia, 23 percent in Africa, 3 percent in Europe and 0.5 percent in the Americas; it is almost non-existent in Oceania (FAO)

Taxonomy of Cattle

Cattle belong to the kingdom Animalia, phylum Chordata, class Mammalia, order Artiodactyla, family Bovidae, genus Bos, and species taurus or indicus. Cattle were originally identified by Carolus Linnaeus as three separate species: Bos taurus, Bos indicus, and Bos primigenius. Bovines, which include cattle, bison, African buffalo, water buffalos, and certain antelopes, belong to the subfamily Bovinae.

1. Introduction
Animal experimentation remains a cornerstone of scientific research in many fields, from medical advances to pharmaceutical testing. However, the ethical treatment of laboratory animals has become a point of significant concern worldwide. India, through the Committee for the Control and Supervision of Experiments on Animals (CCSEA), ensures that ethical standards are maintained in research institutions. Established under the Ministry of Environment, Forests, and Climate Change (MoEF&CC), CCSEA is tasked with overseeing the use of animals in experiments, ensuring that procedures adhere to ethical guidelines and international norms. CCSEA’s guidelines are in line with international standards set forth by organizations such as the International Council for Laboratory Animal Science (ICLAS) and the European Union (EU), but they are tailored to address local needs and conditions. The guidelines, which focus on the welfare of laboratory animals, emphasize the ethical review process, animal care, and the importance of minimizing animal suffering. They also stress the need for researchers to implement the 3Rs—Replacement, Reduction, and Refinement—to minimize the use of animals and ensure humane practices in research. This chapter explores the CCSEA guidelines in detail and compares them with animal welfare regulations from around the world, including the United States, European Union, Japan, and Australia. By understanding the similarities and differences between these regulations, researchers and policymakers can ensure the ethical treatment of laboratory animals on a global scale.
2. Objectives of CCSEA Guidelines
The main objective of the CCSEA guidelines is to ensure that laboratory animals are treated ethically and humanely while also supporting the validity and scientific rigor of research. The guidelines encourage researchers to prioritize animal welfare while minimizing unnecessary suffering. Specifically, CCSEA focuses on:
1. Ethical Treatment of Animals: Ensuring that animals are housed in suitable conditions, given adequate veterinary care, and provided with a comfortable environment to reduce stress.
2. Justification of Animal Use: Ensuring that animals are used only when necessary, and that their use is scientifically justified.
3. Pain and Stress Minimization: Ensuring that experimental procedures cause the least pain, distress and suffering possible.

A finite growth capacity is a characteristic of all cells derived form the normal animal tissue. The cells pass through a series of age related changes before being incapable to divide further. The finite number of generations of growth is a characteristic of the cell type, age and species of origin and referred to as the “Hayflick limit”. The cells derived from embryonic tissue have a greater growth capacity than those derived from adult tissue.

Introduction

Cell culture is a technique that involves the isolation and in vitro maintenance of cells isolated from tissues or whole organs derived from animals, microbes or plants. This technique has immeasurable role in the field of biology. The scientific progress in biology, microbiology and biotechnology in recent years can be credited on the development of cell culture technology. With the development of cell culture the isolation of viruses has become less cumbersome, the assessment of the efficacy and toxicity of new drugs has been easier, new vaccines are being developed and there has been development in biotechnology assisted reproductive technology.

In general, animal cells have more complex nutritional requirements and usually need more stringent conditions for growth and maintenance. For the growth of the cell in vitro specific mediums are required by the cells. Previously natural mediums like plasma ,serums were used but with the advent of synthetic media the specific needs of different cell types can be catered with. Cell culture is governed by a provided set of protocols requiring a sterile pure culture of cells, various nutrients for its growth, sterile cell culture hood, appropriate aseptic techniques and the utilisation of suitable conditions for optimal viable growth of cells.

Introduction
It is a fundamental biological process in which one cell splits into two or more daughter cells. Both unicellular and multicellular organisms rely heavily on it for growth, development, repair, and reproduction. There are two main types of cell division: mitosis and meiosis. Mitosis occurs in somatic cells and produces two genetically identical daughter cells that share the same chromosomal number as the parent cell. This process is necessary for tissue development and repair. Meiosis, on the other hand, happens in germ cells and results in the formation of gametes, which reduces the number of chromosomes by half to ensure genetic diversity in progeny. Proper regulation of cell division is vital for maintaining cellular health, and disruptions in this process can lead to disorders like cancer.
The different stages of cell division is as follows:-
1. Interphase
• Although not a component of mitosis, interphase is essential for preparing the cell for division. It is separated into three sub-phases:
• G1 phase (Gap 1): The cell expands in size while creating proteins and organelles. S phase (Synthesis): DNA replication occurs, guaranteeing that each daughter cell receives an identical copy of the genetic information.
• G2 phase (Gap 2): The cell continues to expand while new organelles are synthesised)
The cell checks for DNA replication mistakes and gets ready for mitosis.
2. Prophase
• In this phase chromatin condenses into visible chromosomes, each made up of two sister chromatids linked at the centromere.
• The nuclear membrane breaks down, allowing the spindle fibres to interact with the chromosomes.

There are a number of different cell lines derived from human and animals. With the dramatic increase in numbers of cell lines, the risk of intraspecies and interspecies cross contamination rises proportionally. It is particularly a major problem in laboratories where many different cell lines of human and animal origin are handled at a time. The purity of the primary cell or continuous cell lines and species of its origin should be checked on a regular basis to authenticate the cell line identity. In the absence of such monitoring, inter and intra species cell line contamination are likely to occur in the laboratory resulting in loss of investigator’s time effort and resources. The advantages of working with a well defined cell line free from contaminating organisms would appear obvious.

Cell Lysis Procedure

Pellet the cells in a microfuge tube: add 1.5 ml culture, centrifuge for 15 seconds at maximum speed, discard the supernatant, and then repeat the procedure. This will result in the cells from 3 ml of culture in a single tube.

Resuspend the cells in 1 ml Lysis buffer.

Take 300 µl aliquot for Bradford protein assay.

Add 50 µl lysozyme, and mix gently.

After 10-20 minutes at room temperature, microfuge for 10 minutes to pellet cell debris.

Use supernatant for LDH assay.