eChapters

Citrus butterfly: Papilio demoleus, P. polytes : Papilionidae

The pest is distributed all over the world and has a host range that includes citrus and other rutaceae plants like Aegle marmelos. Adult has the head and thorax black with a creamy-yellow coloration on the underside of the abdomen. Wings are dull black, orna-mented with yellow markings and a distinct red patch on the hind wing. The underside is orange and yellow coloured and can be seen when it flirts for honey collection or just before egg laying. The Antenna is black and clubbed.

Synonyms : Hog eholera, European swine fever

It is an acute highly infectious viral septicaemia of swine of all ages characterized by rapid and sudden onset, high morbidity and mortality and generalized  haemorrhages. A chronic course  followed by recovery after treatment has been reported in older pigs and appearance of new born pigs with congenital defects.

Etiology : The etiological agent causing hog cholera is a linear  single stranded positive sense RNA virus under the genus Pestivirus and family Flaviviridae. The virions are spherical, 40-50 nm in diameter  and consist of a tightly adherent lipid bilayer envelope covered with glycoprotein peplomers surrounding an icosahedral capsid of 28-35 nm in diameter. The genome is 12 kb in length with 5’end capped but  3’end  not  polyadenylated. The genes for structural proteins are located at 5’ end of genome. The virus replicates in the cytoplasm and matures within cytoplasmic vesicles. Though there is only one antigenic type of the virus, a number of strains of variable virulence and antigenicity has been reported. The causative agent was first thought to be a gram negative bacterium named Salmonella cholera suis. Later, it was confirmed that the disease is caused by a  virus.

The modern breeds of chicken have known to be descended from the wild jungle fowl. India, Nepal, Bangladesh, Myanmar, Thailand, Sri Lanka and Malaysia are the homeland to these jungle fowls. There are four known species of jungle fowl viz. Gallus gallus (Red jungle fowl), Gallus lafayetti (Ceylon jungle fowl), Gallus sonnerati (Grey jungle fowl) and Gallus varius (Java jungle fowl). The domestic breeds of chicken/fowl have originated from Gallus gallus.

This chapter introduces the principles used to classify and grade wool according to fineness, length, colour, strength, purity and suitability for end use. It explains traditional count systems and modern micron-based classification, including the relationship between Bradford count and fibre diameter. The chapter discusses breed and fleece-type differences, objective measurement and the importance of representative sampling. It also explains how grading converts variable biological material into commercially meaningful categories that support fair pricing and appropriate processing decisions.

CMTs can be classified on the basis of morphologic features, tissue of origin (epithelial, myoepithelial or mesenchymal tissue) or prognosis. The World Health Organization (WHO) classification of canine and feline mammary tumors has categorized CMT into three major categories i) malignant, ii) benign and iii) unclassified tumors. On the basis of histological characteristics, the mammary tumors have been classified into fibroadenomas, adenomas, solid carcinomas (with transformed epithelial cells), tubular adenocarcinomas (with tubule like arrangements), papillary adenocarcinomas (having papillary like projections), anaplastic carcinomas (with highly pleomorphic cells), sarcomas (involvement of connective tissue) and malignant tumors (Fig. 2). Fibroadenomas and adenomas are the types of benign mammary tumors the former contains some connective tissues component in between, and carcinomas, adenocarcinomas and sarcomas come under malignant tumors.

Classification of Organisms
Over the years, scientists have developed several systems for the classification of organisms. Greek phlosopher Aristotle (384-322 BC) grouped life forms as either plants or animals. Microscopic organisms were unknown at that time. Fungi were included in plants. Aristotle’s system distinguished only between plants and animals on the basis of movement, feeding mechanism, and growth patterns. In 1735, Carolus Linnaeus formalized the use of two Latin names to identify each organism, a system called Binomial nomenclature. He grouped closely related organisms and introduced the modern classification groups: kingdom, phylum, class, order, family, genus, and species. At that time singlecelled organisms were observed but not classified. This classification had two kingdoms.
Plantae: containing Plants and Fungi
Animalia: containing Animals
In 1866, Ernst Haeckel proposed a third kingdom- Protista, to include all single-celled organisms like amoebas and diatoms. Some taxonomists also placed simple multicellular organisms, such as seaweeds, in Kingdom Protista.
In 1938, Herbert Copeland proposed a fourth kingdom, Monera, to include only bacteria. This was the first classification proposal to separate prokaryotes from eukaryotes, at the kingdom level.
In 1957, Robert H. Whittaker proposed a fifth kingdom –Fungi.Fungi do not ingest food as animals do, nor do they make their own food, as plants do. They secrete digestive enzymes around their food, breaking it down before absorbing it into their cells.

Taxonomy (biological systematics) is the branch of science which deals with classification of units or individuals on the basis of similarities and differences. The classification, nomenclature, and identification are three interrelated components of bacterial taxonomy (Cowan, 1965).

Classification: Classification is the arrangement of bacteria into groups (taxa) based on the similarities of certain characteristics. Presently 11,000 bacterial species is classified. At the current rate of 600 bacterial species / year it is estimated to take 1000 years to classify all the bacteria!

Nomenclature: It is the assignment of specific names to the taxonomic groups following the regulations mentioned in ‘International Code of Nomenclature of Bacteria’ (Euzeby, 1997). International committee on systematic bacteriology (International committee on systematics of prokaryotes, ICSP) standardizes the code. The committee is helped by a number of taxonomic subcommittees on different groups of bacteria. The Code can be amended by the Judicial Commission. The Code contains general considerations, principles, rules and recommendations on the naming of prokaryotes (bacteria) up to the rank of ‘Class’.

Abstract

Classification of the hundreds of possible dryers is essential to the logical selection of appropriate dryer for a given application. Diverse criteria for classification as well as selection of dryers are presented and discussed briefly. The advantages and limitations of different dryer types must be taken into consideration. Initial capital cost is often the key deciding criterion in industrial dryer selection. This is not a good strategy as the user must pay for the operating costs over a long period of life of the dryer. In general several different dryer types are suitable for a given product. Careful selection is essential for cost-effective operation of the dryer.

2.1 What is a frequency distribution?

A frequency distribution shows the frequencies of occurrence of the observations in a data set. Often the distribution of the observed data is called an empirical frequency distribution, in contrast to the theoretical probability distribution determined from a mathematical model.

The class interval is a term used in statistics when we are given a continuous series. Class means a group of numbers in which items are placed such as 0-10, 10-20, 20-30, etc. Class interval refers to the numerical width of any class in a particular distribution.

2.2 Relative frequency distributions

Although creating a frequency distribution is a useful way of describing a set of observations, it is difficult to compare two or more frequency distributions if the total number of observations in each distribution is different. A way of overcoming this difficulty is to calculate the proportion or percentage of observations in each class or category. These are called relative frequencies and each is obtained by dividing the frequency for that category by the total number of observations (column 3 of Table 2.1). The sum of the relative frequencies of all the categories is unity (or 100%) apart from rounding errors.

1.1 Classification

The raw or ungrouped data are in unorganized form and need be organized in meaningful and readily comprehensible form in order to facilitate further statistical analysis. Classification of data is the first step in this direction. It is the process of arranging thing in groups according to their resemblance and affinities. There are two basic types of classification namely-qualitative and quantitative. In qualitative classification, the basis of classification is some attribute or quality like: sex, literacy, religion, etc. A qualitative classification may be simple or manifold. The classification done with respect to one attribute is termed as ‘Simple Classification’. The classification in which two or more attributes are considered and several classes are formed is called ‘Manifold Classification’. In quantitative classification, the collected data are grouped in respect of characteristics, which can be measured and numerically expressed such as height, weight, etc.

Statistical Series: When observations of any characteristic present in the individual of a group are recorded and arranged one after the other in a systematic order, they form a series, known as statistical series. For example: milk yield of 20 cows, height of the students in a class in a systematic order, etc. These are some important types of series:

• Discrete series: In this series, observations can take up only exact values and not any fractional values, is called discrete series. That means, this type of series has whole number of counting. For example: number of the students in a class, members of a family, number of births in a certain year, etc

• Continuous series: A series which can take up any numerical value (integral/ fractional) within a certain range is called continuous series. For example: milk yield of 20 cows, height, weight, temperature, etc.

• Array series: When we arranged the observations of a series either in ascending order of their magnitude or descending order of their magnitude, then it becomes an array series.

• Spatial series: When items of a series are given according to space or place or time, then such type of series is known as spatial series. For example: month wise milk yield of a herd of cows, month wise income or expenditure of an industry, population of a country according to states, etc.

In broad perspective, plants and crops of agriculture can be classified mainly based on three criterions namely descriptive, ecological and agronomical. Understanding these basic classifications will help us to study the characteristics of each plant in detail.

Descriptive Classification

In descriptive approach, plants and crops can be classified based on the mode of reproduction, mode of pollination, life span, growth habits and leaf retention property. Sexual and asexual reproducing plants are the two groups based on the mode of reproduction. The sexual reproducing plants are developed from a seed after the union of male and female gametes and asexual plants reproduces through vegetative means and not by male and female gametes.

1. True bone tumours. Neoplasms arising from cells of mesenchymal origin, derived from a common ancestry and whose function is primarily skeletal boen formation. These tumours fall into four main groups according to the predominant cell type present. By reason of the mutability of the cells metaplasia is common and intermediate stages are found.

Characters

1) They are called true flies.

2) It is one of the largest orders in the class Insecta, having more than 1, 20, 000 described species.

3) On thorax, there is only one pair of wing (Di = two; ptera = wings) i.e. Mesothoracic wing. Metathoracic pair of wings are modified into structures called “Halters or balancers.” Halter is a rod like structure having knob at distal end. During flight, this halter goes on vibrating @ 300 vibrations/sec. Its main function is to keep fly balanced during flying/flight.

4) One pair of compound eyes is present which is dichoptic in female and holoptic in male.

5) Larvae are apodous which is called maggots.

6) The order Diptera is divided into suborders, Orthorrhapha and Cyclorrhapha. These sub orders are distinguished morphologically by wing venation and structure of antennae.

Forages can be classified according to the nutrient density in the dry matter.
Roughages: These are diets that have more than 18% crude fiber, more than 35% cell wall content, and less than 60% TDN on DMB. There are two types of roughage: dry roughage and green roughage. Roughages are classified as succulent or non-succulent according on their moisture content. Succulent feeds are ones with greater than 80% moisture. Non-succulent feed contains less amount of moisture. Roughages can also be classified based on legumes, for example, leguminous and non-leguminous roughages. Roughages are divided into three types based on their nutritional content (on DMB): maintenance, productive and non-maintenance.
Roughages: Feedstuffs having more than 18% crude fibre, more than 35% cell wall contents and less than 60% TDN on dry matter basis (DMB) are known as roughages. There are two kinds of roughages, dry roughage and green roughage. On the basis of moisture content the roughages can be classified into succulent and non-succulent. Succulent feeds are those which contain more than 80% moisture. Feed contains lesser amount of moisture is known as non-succulent. Roughages can also be classified on the basis of legumes. e.g. leguminous and non-leguminous roughages.
Roughages can be classified based on their nutritive value (on DMB) into maintenance type, productive type and non-maintenance type.

A. Answer the following questions:

1.    What is concentrate ingredients?

Ans: These are feedstuffs having more than 60% TDN, less than 35% cell wall contents and less than 18% crude fibre on dry matter basis.

2.    What is soilage?

Ans: Pasture whether natural or cultivated when cut and fed green to an animal in its own stall is called soilage.

3.    What is husk?

Ans: Dry outer covering of grains and grams e.g. gram husk, rice husk.

4.    What is fodder?

Ans: Any green plant or crop meant for animal feeding for supply of nutrients and bulk.

5.    What is leguminous fodder?

Classification of fracture and its repair in large animal practice by external completion method.

Aim

To know the different level of fracture limbs. In order to access their method of repair (Fig.1).

Complete fracture- It is a fracture in which there is complete loss of bone continuity and the bone is divided into two or more fragments (Fig.1).

Green stick fracture- It is the fracture in which, the cortex opposite to the bending force fractures completely, while the cortex under the force remains in tact, commonly seen in immature animals, (Fig-2)

Overriding fracture-A fracture in which the fragments lie side by side, causing shortening of limb (Fig-3)

Transverse fracture-The fracture line here runs transverse to the long axis of bone. Such type of fracture is caused by bending forces (Fig-4).

Oblique fracture- In this the fracture line runs oblique to the long axis of the bone. Such type of fracture is caused by bending with axial compression (Fig-5).

Spiral fracture-Here the fracture line spirals along the long axis of bone. Such type of fracture is caused by torsion, twisting or rotational forces e.g. in humorous (Fig-6)

Comminuted fracture- In this fracture, at least three fracture lines inter connect each other at one point (Fig-7).

CLASSIFICATION

• Wistar albino
• Sprague Dawley
• Long Evans
• Charles

Wistar Albino

Wistar albino is common strain found in most laboratories and used extensively for research. They have the following characteristics: (i) Less resistance of inflammation, (ii) No incidence of spontaneous tumor.

Sprague Dawley

Types of Breeds
Domestic cattle belong to the family Bovidae, sub-family Bovinae and can be classified into Bos Taurus and Bos indicus. They have 30 pairs of chromosomes, interbreed and are distributed throughout the tropics. The domestication of Bos taurus cattle took place some 8000to 9000 years ago and Hamitic longhorn and shorthorn types are believed to be their ancestors. The origin of Bos indicus breeds (humped cattle) were in western Asia. Both humped and hump less cattle were introduced to Africa from western Asia and into America and Australia from Europe by the immigrants. The European cattle Bos taurus were introduced in the tropics to be raised as pure-bred sand crossbred with indigenous breeds. As a result of crossing of native cattle with European dairy breeds, large numbers of crossbreeds have been produced in various tropical countries, which are being used in selection programs. Zebu Bos indicus cattle were introduced into United States in the nineteenth century for crossbreeding with European breeds. Breeds resulting from crosses are used in the southern regions of North America and tropical South America. Most of the cattle breed in the tropics evolved, through natural selection, for adaptability and survival to local environments. Often, breeds resemble each other with slight morphological differences, but because of constant inbreeding in one locality, independent breeds have evolved. In general, the cattle from drier regions are well built and those from heavy rainfall areas, coastal and hilly regions are of smaller build.
Classification of Cattle Breeds
Most indigenous cattle breeds in the tropics are multipurpose (milk, meat, draught) and that only a few breeds have good milk potential. Physical and economic parameters for some of the important indigenous dairy breeds and new crossbred types developed in the tropics are discussed. Indian cattle breeds of cattle are classified in to three types as under: a) Milch breeds: b) Dual Purpose breeds: c) Draught breeds