eChapters

Any deviation from optimum state could be referred as stress. Every living creature has to pass through one or the other type of stresses in life. Most of the farm animals including poultry suffer from various types of stresses. These include due to:

Adverse environment

Managemental practices

Diseases

Nutritional deficiency

Transportation etc.

Spontaneous hyperglyceridemia is a metabolic condition characterized by abnormally high levels of glycerol and triglycerides in the bloodstream. This condition can occur in various animal species, including dogs, cats, horses, and ruminants, and is often linked to underlying metabolic or endocrine disorders. Left unmanaged, hyperglyceridemia can lead to severe health complications, including pancreatitis, hepatic lipidosis, and cardiovascular issues. Nutritional management is a cornerstone of treatment and prevention for this condition. Hyperglyceridemia results from an imbalance in the metabolism of triglycerides and glycerol. Normally, dietary fats are broken down into glycerol and free fatty acids, which are absorbed, processed in the liver, and utilized for energy or stored. Hyperglyceridemia arises when triglyceride production exceeds utilization or clearance from the bloodstream.
Causes and risk factors
1. Genetic predisposition: Breeds like Miniature Schnauzers, Shetland Sheepdogs, and Beagles are predisposed to hyperglyceridemia in dogs.
2. Obesity: Excess fat tissue increases triglyceride synthesis and decreases clearance.
3. Endocrine disorders: Conditions like diabetes mellitus, hypothyroidism, and Cushing’s syndrome can impair lipid metabolism.

Spontaneous hypothermia in animals occurs when their body temperature drops below the normal range due to internal or environmental factors, without direct exposure to extreme cold. Unlike hypothermia caused by environmental factors, spontaneous hypothermia often results from metabolic, physiological, or pathological conditions that impair thermoregulation. It is more challenging to predict and manage as it can occur in a wide range of scenarios, including illness, trauma, or systemic dysfunction. Proper nutritional strategies play a critical role in both prevention and recovery.
Spontaneous hypothermia is a drop in core body temperature due to the body’s inability to generate, conserve, or regulate heat, independent of external temperature changes. Mechanism of action
The body maintains its temperature through a balance of heat production (via metabolism and muscular activity) and heat loss (via radiation, convection, conduction, and evaporation). Spontaneous hypothermia occurs when:
1. Heat production fails: Conditions such as malnutrition or metabolic disorders limit the body’s ability to generate heat.
2. Heat loss increases: Trauma or vascular conditions can lead to excessive heat loss.
3. Thermoregulatory failure: Diseases affecting the nervous system or endocrine glands disrupt the mechanisms that regulate body temperature.

3.1. Introduction
Sports nutrition is one of the areas of nutrition that closely coordinates with human anatomy research and the science of sports. The application of nutrition science to a practical daily eating plan intended to optimise the performance of athletes in competitive events, speed up the healing and reconstruction process following intense physical activity, and supply the energy for physical activity is known as sports nutrition. It also seeks to promote wellness and general health. Nutrition is strongly connected to fitness, specifically whilst sports activities are involved. It is necessary to recognize the physiology of the workout on the way to recognizing the specific metabolic pathways that coexist in the course of sports activities practice (O’Donoghue, 2014). Three things are necessary for athletic success: genetic endowments, level of training, and nutrition. It is impossible to change one’s genetic makeup. The most efficient method for enhancing athletic performance is specialized exercise training, and any kind of workout regimen must include adequate nutrition. The dietary requirements of athletes and workout aficionados are different from those of physically inactive people due to variations in their calorie needs as well as macro- and micro- nutrient needs. To achieve peak athletic performance, it is crucial to investigate and evaluate the dietary requirements of athletes prior to, during, and following the contest (Cotugnae et al., 2005). Exercises that improve one’s heart health involve swimming, jogging, and climbing. Other exercises that improve one’s flexibility, power, and endurance of muscles involve stretching and hard training with resistance. For example, if someone decides to choose to lose excess fat and to do so, they would design a regular exercise routine that incorporates all of the above-mentioned elements, as well as choosing more nutritious foods in the diet to meet the higher demands to endeavors. Athletic performance requires sports-related abilities. These neuromotor skills, such as balancing, pace, power, durability, stamina, agility, and execution, are particular to sports.

Normal Solution in Analytical Chemistry

A normal solution is that one that contains one equivalent weight expressed  in grams (one gram equivalent weight) to be dissolved substance per litre of solution, or one gram-milliequivalent weight per millilitre.

In the case of acid a 1N solution contains 1.008 gram of replaceable hydrogen per litre of solution. A 1N solution of a base is one that contains 17.008 of hydroxyl per litre. A 1N solution of a precipitating agent contains a weight of precipitating ion equivalent to 1.008 hydrogen. The quantity of pure reagent necessary per litre of 1N solution of a precipitating solution is calculated by dividing the gram molecular weight by the valency of the precipitating ion. In case of normal solution of oxidising and reducing agents, the amount is calculated by dividing the gram molecular weight by the total valency change in the ion concerned.

Unit of Length

A metre (m) is taken from the international prototype metre at the International Bureau of weights and measures; at 32ºF. (0ºC) = 39.37 inches (in.) = 3.280833 feet (ft.) = centimetres (Cm.). A centimetre (Cm.) = 10 millimetres (mm.) = 10,000 microns (µ) = 0.337 inch (in.) or 10-4cm. A millimetre (mm.) = 1,000 microns (µ) = 0.03937 inch. A micron (mµ) = 1,000 milli-microns (µ) = 3.937x10-5 inch. A milli-micron (mµ) = 0.001 micron or 10-7 cm. A foot (ft.) = 0.3048006 metre (m.) = 30.48006 centimetres (Cm.) = 12 inches (in.)., inch = 2.5 cm. An inch (in.) = 2.539998 centimetres (Cm.) = 25.39998 mm = 25,399.98 microns (µ).

Standardization

Standardization means establishment of standards for matters such as quality, size, weight and color. Once standards are set grading is possible using the criteria established in the standards. Thus, standardization involves establishment and maintenance of uniform measurements of produce quality and/or quantity.

Grading

Grading follows standardization. It is a sub-function of standardization. It is a method of dividing products into certain groups or lots in accordance with predetermined standard. Grading before sale enables farmers to get a higher price for their produce .Consumer get standard quality products at fair prices. It is easier for them to compare the prices of different qualities of a product in the market. It minimizes their purchasing risk, for they will not get a lower quality product at the given prices .e.g. eggs are graded into different categories based on set standards. Similarly cattle feed is also sometimes categorized into different grades based on established standards.

This chapter introduces the standards, certification and labelling systems that establish confidence in wool quality and commercial descriptions. It discusses the roles of the International Wool Textile Organisation, ISO and the Bureau of Indian Standards in developing testing and product standards. Fibre-content declarations, care labels, Woolmark certification, quality assurance, accreditation and traceability are examined. The chapter also considers geographical indications and protection of heritage products, showing how standards and certification support fair trade, consumer protection and premium positioning.

Livestock farming is an important activity to a large population of small and marginal farmers as well as landless agricultural labourers of Tamil Nadu. It also provides employment opportunities for most of the unemployed and underemployed in the rural areas. Tamil Nadu is bounded by the Eastern Ghats on the north, by the Nilgiris, the Anamalai Hills and Kerala on the west, by the Bay of Bengal in the east, and by the Indian Ocean on the south. Tamil Nadu is the eleventh largest state in India by area. The land area has been classified into seven agro-climatic zones based on soil characteristics, rainfall distribution, irrigation pattern, cropping pattern and other ecological and social characteristics. Tamil Nadu endowed with 13.97 per cent of recognised breeds of the domestic ruminants (cattle, buffalo, sheep and goats) with 22.55 millions of population (19^thLivestock Census-2012).

In old days, Statistics is considered as a method for collected numerical information. In general, Statistics deals with concepts, principles and methods dealing with collection, summarization, analysis and interpretation of data. Data means a collection of numerical facts. Data is plural and singular is datum. Generally there are two classifications for data, quantitative and qualitative. In the case of quantitative character the individuals are measured. While in the case of qualitative character, the individuals are distinguished by some quality. Data collected by the investigator for the purpose of the investigation are known as primary data. E.g., data obtained in a population census. Data collected by others for some other purpose and is used by the investigator are known as secondary data. E.g., Annual Reports, Official publication etc. The aggregate of all the observations pertaining to a character is called a population. Sample is a part of the population selected according to some definite rule. Usually the sample is used to make an inference about the population. In other words sample is a miniature of the population. The methods by which we analyze the data are called statistical methods. At the end of the enquiry, the investigators will naturally left with a large number of filled up schedules and a very efficient statistician couldn?t interpret anything from it unless it is classified and extracted. When we classify based on the quality like colour, sex, religion etc. which can?t measure directly, the classification is qualitative. But characteristics such as height, weight, length, time etc. can be easily measured using a scale. Such are called quantitative characteristics. The quantitative characteristics may be discrete or continuous. In the case of numerical values like number of petals in a flower, number of days in which rain occurred in a month etc. are whole numbers and are called discrete variables. If there may occur many values with in an interval, we call it as continuous variables.

Objectives

To acquaint with the various methods of sterilization and disinfection used in laboratory animals.

Materials Required

Boiler, autoclave, hot air oven, chemical disinfection.

Sterilization

It is a process of the complete removal or destruction of living organisms including viruses, vegetative forms and spores. Sterilization is an absolute term. Nothing can be “partially sterile’’, either, it is or it is ‘not’. An article must be protected from recontamination after sterilization.

32 – 33. Agronomic practices for fodder production: Feeding green forages to animal is economic and better for animal health and production. To get green forage throughout the year, it is necessary to sow the crop at proper time and also to harvest it at a proper stage. According to season, following agronomical practices may be followed:
(a) Rabi crops: Berseem, Lucerne, Oat, Mustard, Sugarcane tops
(b) Zaid crops: Chari, Maize, Sorghum, Cow pea, Guar.
(c) Kharif crops: Maize, Sorghum, Cow pea, Sudan grass, Napier, Para grass.
Berseem and Lucerne (legumes) are best forages for milk production. Berseem is called as king and Lucerne as queen of the fodder crops. Maize, Sorghum, Oat (non – legumes) at flowering stage are good forages. Hybrid Napier, Guinea grass, Para grass and other green grasses are palatable, but poorer in nutritive value than legumes and many non – leguminous forages. Straws and
stovers are poor quality roughages. Average voluntary intake of legumes is 2.0 kg; Non legumes and other grasses have 2.25 kg; while of straws, stovers is only 1.5 kg Dry Matter / 100 kg body weight.

Introduction

Livestock plays an important role in the sustainable livelihood of poor people of rain-fed agro-ecosystem, because of inherent risk involved in the crop farming due to uncertainty of rainfall and occurrence of recurrent droughts. They provide income and increased economic stability, and often the most important “cash crops” in small-scale mixed farming systems. Livestock sector in India is highly livelihood intensive and most rural households own livestock of one species or the other and earn supplementary incomes from them. Livestock holding is less iniquitous than land holding and income from livestock is more equitably distributed. The sector contributes 25.6 per cent of the value of output at current prices of total value of output in agriculture, fishing & forestry sector and in GDP, it was 4.11% in 2012-13 (19^th livestock census, 2012) therefore, development of the livestock sector is the critical pathway to rural prosperity

As per the 19^th livestock census, the total livestock population consisting of Cattle, Buffalo, Sheep, Goat, Pig, Horses & Ponies, Mules, Donkeys, Camels, Mithun and Yak in the country is 512.05 million numbers in 2012. The total Bovine population (Cattle, Buffalo, Mithun and Yak) is 299.9 million numbers in 2012 which shows a decline of 1.57% over previous census. In percentage basis distribution of livestock were: 37.28% were cattle, 21.23% buffaloes, 12.71% sheep, 26.40% goats and 2.01% pigs. The corresponding figures as per the 18th Livestock Census were 37.58%, 19.89%, 13.50%, 26.53% and 2.10%. The number of milch animals (in-milk and dry) in cows and buffaloes has increased from 111.09 million to 118.59 million, an increase of 6.75%. The number of animals in milk in cows and buffaloes has increased from 77.04 million to 80.52 million showing a growth of 4.51%. The Female Cattle (Cows) Population has increased by 6.52% over the previous census (2007) and the total number of female cattle in 2012 is 122.9 million numbers. The Female Buffalo population has increased by 7.99% over the previous census and the total number of female buffalo is 92.5 million numbers in 2012. The buffalo population has increased from 105.3 million to 108.7 million showing a growth of 3.19%. The total sheep in the country is 65.06 million numbers in 2012, declined by about 9.07% over census 2007. The Goat population has declined by 3.82% over the previous census and the total Goat in the country is 135.17 million numbers in 2012. The total poultry population in the country has increased by 12.39% over the previous census and the total poultry in the country is 729.2 million numbers in 2012. The total number of animals in milk in the country is 116.77 Million numbers.

STRAWBERRY

White grubs and cut worms

These insects cut the roots and stems of young plants.
 
Hairy caterpillars

Defoliate plants during June-July

Straws consist of the stems and leaves that remain after the threshing of mature seeds. These materials are characterized by their high fiber content and lignin, while offering minimal nutritional benefits. Straws are primarily utilized as feed for ruminants, rather than for monogastric animals such as pigs or poultry.
Paddy and wheat straw: These are byproducts of grain harvesting and are commonly used as a primary feed source for cattle and buffalo. Their nutritional profile is low, with approximately 3-5% CP and 40% TDN. They are deficient in essential minerals, vitamins, fatty acids, and proteins. Paddy straw contains about 6-7% lignin in its dry matter, which is lower than that found in other cereal straws. However, it has a high ash content (17% of dry matter) and elevated silica levels. Notably, the stems of paddy straw are more digestible than the leaves. The addition of urea can enhance the feeding value of straw, although the high lignin content may diminish its palatability. Urea treated rice straw contains around 8.1-9.5% CP (normal level is 3.5-5.3%) where as urea treated wheat straw contains around 8.5-9% CP (normal CP is 2.63-4.20%). Additionally, paddy straw contains significant amounts of oxalic acid, which can hinder calcium absorption in the gastrointestinal tract of ruminants, while also contributing bulk to their diet.
Barley straw: It has a nutritive value comparable to that of oat straw, but it presents challenges due to the presence of barbed beards. Its composition includes 0.30% DCP and 48% TDN.
Oat straw: It is regarded as one of the superior options for cattle feed, being soft, palatable and more nutrient-rich than other straw types. On average, it contains 0.3% DCP, 48% TDN, 0.38% Ca and 0.07% P.
Pulses straw: These includes varieties such as black gram, green gram, moth bean, pigeon pea and cow pea, is relatively palatable and nutritious for cattle. Among these, black gram, green gram and moth bean straws are particularly noted for their palatability and nutritional value. While the energy content of these straws is similar to that of cereal straws, they tend to provide a better
source of digestible protein. For high milk-producing cattle, supplementation with energy-dense feeds like cereal grains is often necessary.

This chapter introduces the biological structure and formation of the hen egg. It examines the shell, cuticle, shell membranes, albumen, yolk, vitelline membrane, chalazae and germinal disc and explains the functions of each component. The chapter also describes the reproductive system of the laying hen, oogenesis and the sequence and timing of egg formation within the oviduct. Comparative egg structures of other poultry species and shell pigmentation are discussed, along with shell ultrastructure and quantitative composition.

(Method of Cocimano and Leng, 1966; Conrad, 1972; Varady & Harmeyer, 1972)
Hypothesis

The validity of measuring urea kinetics using a single dose of ¹⁴C-urea and using urinary excretion as a sampling system is based on specific assumption:

    1.    There is a rapid equilibration of ¹⁴C-urea with the endogenous urea pool following infusion. This pool is conceived to be a measure of all body compartments permeable to urea and in equilibrium with the plasma urea pool. 

    2.    Experimental animals are metabolically maintained in a steady state during the test period and metabolic breakdown of urea is random.

    3.    Specific radioactivity for urinary urea is proportional to the dilution of replenishment and simultaneous depletion rate of the urea pool.

    4.    That the metabolic parameters of urea are correctly measured.

Sub estrus (Weak or Silent Estrus) is a condition in which there are normal cyclical changes in the reproductive organs of a cow but the heat signs are not exhibited to a level of intensity as in normal cows leading to failure of estrus detection by a farmer. This condition is common during post partum period. It is a common reproductive problem in cattle affecting the productivity and economics of a cow due to increase in inter-calving interval, production loss, treatment expenses etc.

Introduction

Climate change represents a threat not only to the existence of individual species, but also to the genetic diversity hidden within them. The finding promises to complicate assessments of how climate change will affect biodiversity, as well as conservationists’ task in preserving it.

Climate change comes as an additional factor affecting a livestock sector that is already highly dynamic and facing many challenges. Important objectives of AnGR management include ensuring that AnGR are effectively deployed to meet these challenges (i.e. are well matched to the production environments in which they are kept) and that the genetic diversity needed to adapt production systems to future changes is maintained. Climate change is likely to create a number of problems in many areas of animal husbandry (housing, feeding, health care, etc.) and threaten the sustainability of many livestock production systems and their associated AnGR. At the same time, many of the specific challenges associated with climate change (high temperatures, disruptions to feed supplies, disease outbreaks, etc,) as well as the general unpredictability it brings to the future of the livestock sector, highlight the importance of retaining diverse genetic options for the future. The upper critical temperature of dairy cattle is lower than other livestock species (Wathes et al.,1983).

Population growth and rising demand for processed food have increased pressure on food industries to improve safety while reducing energy, water, waste and environmental impacts. Green preservation technologies seek to deliver effective processing through cleaner operations, responsible resource use and reduced dependence on toxic substances. These approaches support sustainable industrial development by lowering processing time, conserving nutrients and improving the utilisation of raw materials. The chapter discusses energy-efficient preservation, water-saving techniques, waste valorisation and the conversion of by-products into useful materials. Life-cycle assessment is introduced as a method for evaluating environmental performance across the preservation system and identifying opportunities to reduce emissions, resource consumption and food-chain waste.