eChapters

Introduction

Though India is a highest producer of milk in the world, only 15 to 20 per cent of the milk is marketed through organized sector comprised of cooperative societies, public and private processing plants. Bulk marketing is limited to processing plants and cooperative societies. In contrast to Indian situation, most of the milk in developed world is consumed in different processed forms. It is something very general to India where overall food markets for processed foods are generally low and same is the case with milk. By all estimates about 75 per cent of the milk purchased by the consumer as liquid milk whether raw or processed. The share of pasteurized milk is only 10 per cent but the demand is increasing at the rate of 15 percent per annum. One fourth of the milk production is processed in the unorganized sector transforming into products like, sweets. Khoa, paneer, curd, lassi, etc. There are small scale milk product manufacturing units which fall in the category of semi-organized sector comprised of creameries, ice-cream units which are manufacturing the similar products as produced by the composite milk plants in the organized sector. They generally serve the local markets but have the important share in processing of milk as well as meeting the consumers specific demands. The organized sector comprised of mainly dairy plants, procures surplus milk through Milk Producers Cooperative Societies and generally follows the HACCP standards leading to quality of the products, whereas unorganized sector is composed of milk vendors, contractors, halwaies and creameries, collect milk from producers and sell either as raw milk or manufactured milk products or both.

Introduction

India has cemented its position as the global leader in milk production for 2023-24, contributing a staggering 230.58 million tonnes, or 25% of the world’s total supply. This achievement reflects an annual growth rate of 4%, driven by a vast network of small-scale farmers who manage one or two milch animals each. Despite their limited productivity, these farmers collectively power the nation’s dairy industry. Before the transformative Operation Flood, the sector was fragmented, dominated by middlemen, and poorly linked to urban demand. The initiative revolutionized the industry, introducing cooperative, private, and state driven organizations that established a seamless system for milk procurement, processing, and marketing. Today, thousands of dairy factories across the country transform raw milk into value-added products to meet India’s immense demand, with rural households allocating 15.51% of their food budget to dairy and urban households spending an even higher 18.19%. Coordinating milk collection from millions of scattered producers and delivering it to processing facilities is a monumental task, yet this streamlined system ensures that India’s dairy sector continues to thrive and satisfy its growing consumer base. India’s dairy export performance in 2023-24 was nothing short of “legendairy,” shipping 63,738.47 metric tonnes of dairy delights worth $272.64 million to fans in the UAE, Saudi Arabia, USA, Singapore, and Bhutan. Butter, ghee, and dairy spreads took the spotlight with $43.65 million in exports (8,106.54 MT) to destinations like Saudi Arabia, Bahrain, and Qatar, spreading Indian flavor worldwide. Cheese exports were equally impressive, with 9,262.63 MT worth $46.84 million making their way to the UAE, USA, and Bhutan clearly, everyone loves a slice of India.

Introduction

Training is the crucial and expensive component of HRD, intended to improve the efficiency and effectiveness of performance of the members of organization through planned learning efforts, transfer of such learning at work place and in turn improvement of the organizational performance. Given such objectives, most of the training programmes fail to inculcate the transfer component in trainees (Subedi 2004). Hence, there is an increasing concern over training transfer at work place and the resultant improved organizational performance in terms of productivity, efficiency, effectiveness and turn over etc (Howard 1995, Huselid 1995, Martocchio and Baldwin 1997 and Salas et al.. 2000, Thayer1997).

Table of random numbers: Most books on research methodology and statistics have tables that contain randomly generated numbers. There is a specific way of selecting a random sample using these tables.

Table shell : A table that is complete except for the data.

Table : A set of data arranged in rows and columns.

Tangible assets : Assets you can touch : buildings, machinery, gold, works of art, and so on. Contrast with intangible assets.

Tariff : Often used to describe a tax on goods produced abroad imposed by the government of the country to which they are exported. Many countries have reduced such tariffs as part of the process of freeing up world trade.

Tax arbitrage : Creating financial instruments or transactions that allow the parties involved to exploit loopholes in or differences between their tax exposures, so that all involved pay less tax.

Tax avoidance : Doing everything possible within the law to reduce your tax bill. Learned Hand, an American judge, once said : “There is nothing sinister in so arranging one’s affairs as to keep taxes as low as possible … nobody owes any public duty to pay more than the law demands.” Contrast with taxevasion.

Tax base : The thing or amount to which a tax rate applies. To collect income tax, for example, you need a meaningful definition of income. Definitions of the tax base can vary enormously, over time and among countries, especially when tax breaks are taken into account. As a result, a country with a comparatively high tax rate may not have a high tax burden if it has a more narrowly defined tax base than other countries. In recent years, the political unpopularity of high tax rates has lead many governments to lower rates and at the same time broaden the tax base, often leaving the tax burden unchanged.

ABSTRACT

Jharkhand state is endowed with vast and rich natural resources. It’s 80 per cent population resides in 32,620 villages and depends mainly on agriculture and allied activities for their livelihood. Rural population in Jharkhand still suffers from several ailments, weakness and constraints which come in the way of the use of ICT for agricultural development. Low level of literacy, poor socio-economic status, low penetration of extension services, language barrier, lack of electricity, etc., are some of the problems due to which  the farmers are unable to access the latest techniques in farming through different ICT services and are using the traditional knowledge and techniques which yields very less.

Introduction

The definition of the teaching-learning process, also known as the education process, is a methodical, planned sequence of events that both the teacher and the student follow in order to accomplish the goals of teaching and learning. In primary education, values education is taught through games. Extension services are vital to the global rural and agricultural communities because they spread knowledge, offer useful skills, and encourage sustainable practices. The teaching and learning process, a dynamic exchange between extension agents and community members with the goal of enabling people to better their lives and livelihoods, is at the centre of these extension efforts.

Extension Teaching

It is now evident that the extension is an educational process which attempts to produce desirable changes in the human behaviour. This educational process is nothing but teaching-learning process and this is explained by Leagans (1961) as follows:

Teaching is the process of arranging situations that stimulate and guide the learning activity towards the goals that specify the desired changes in the behaviour of people. Teaching consists of providing situations in which the things to be learnt are brought to the attention of the learners, their interest is developed, desire aroused, conviction created, action promoted and satisfaction ensured.

Learning is the process by which an individual, through his own activity, changes his behaviour.

Process means a course of procedures, something that occurs in a series of actions or events conducting to the desired end.

In the present scenario, team formation is the key enabler for getting all sorts of benefit in organizational perspective as well as benefit sharing perspective. So, in any organizational atmosphere team plays a pivotal role in performance of human resources in organization through contributing to the organizational goal. Successful organizations today know that teams make a big difference in achieving strategic goals. Teams that are strong, flexible, and productive can be the competitive edge needed to produce better results, achieve higher quality, lower costs for the organization and the customer. With active involvement, high-performing teams can help promote employees bottom line results, as well as their adaptability, quality, service, and safety. To achieve these objectives, teams have to start doing things differently. Team members and leaders need to communicate more effectively with each other, encourage more involvement, tap into one another’s creativity, overcome the group’s resistance to change, and renew team spirit. But this change can also create difficulty for some who may lack the knowledge, understanding, or a mindset that is conducive to teamwork. Team Building for high performance teams is designed to provide skills and promote high levels of team performance and team member satisfaction. Consequently, team building is required for knowing each other within the organizational team, boosting morale, improving communication and relationships, making the workplace more enjoyable, motivating a team, getting everyone “onto the same page” including goal setting, teaching the team self-regulation strategies, helping participants to learn more about themselves (strengths and weaknesses), identifying and utilizing the strengths of team members, improving team productivity, identifying and developing leadership skills and practicing effective collaboration with team members. Group is a collection of two or more interacting individuals with a stable pattern of relationships among them, who share common goals and who perceive themselves as being a group. Group essentially consists of social interaction, stable structure, common interests, perceive themselves as part of group.

ABSTRACT

Veterinarians, appointed in field, rarely get the opportunity to update their knowledge and skills, through trainings or courses, due to their working conditions. More over, they feel isolated and neglected from colleges due to poor interactions. Looking to this need, the courses on Post Mortem Techniques and Diagnosis of Parasitic Diseases in Livestock were developed, based on the Need Assessment survey. The courses were developed on interactive CD ROM with audio, video clips and photographs along with some reading material. The courses were of one credit each and had minimum one face-to-face session. The response by the veterinarians was tremendous and around 210 veterinarians offered for the courses by paying fees. Participants and stakeholders expressed the need for additional courses and accordingly two more courses on surgical techniques in large and small animals were launched which also received good response.

1. Technical Feasibility of Dairy Unit

This includes following information such as
 
    1.    Availability of good quality animals in nearby dairy market,
 
    2.    Availability of good grazing grounds and lands,
 
    3.    Availability of green/dry fodder,
 
    4.    Availability of concentrate feed, medicines etc.
 
    5.    Further availability of veterinary aid, dairy breeding (AI) centre, milk collection and marketing centre are also important.

    6.    Nearness of the selected area to veterinary/breeding/milk collection centre and the financing bank’s branch.

    7.    Capability of the owner and employees such as technical knowledge and skill.

Interest Rate : Provisional Interest rate @ 14.50% p.a. has been taken for evaluation of the project report. However, the sanctioning authority may consider the exact rate of interest applicable, on the date of sanction. Development of farm should be completed within 3 months from first disbursement.
 
Repayment of loan : A five-year repayment programme has been drawn with six months moratorium period, the installments will be monthly starting from 6th month onwards. The applicant has to make tie-up with the local MPCS and the repayment should be routed through the MPCS.

Interest Rate: Provisional Interest rate @ 15.75% p.a. has been taken for evaluation of the project report. However, the exact interest rate will be decided by the sanctioning authority on the date of sanction.

Disbursement of loan: Funds for fodder cultivation and civil construction should be disbursed first. Development of sheds and fodder plots should be completed within 3 months from first disbursement. Then disbursement of 1^st Batch cow (10 animals) will be done. Last disbursement for 2^nd Batch cows (10 animals) should be done after 5-6 months of purchase of 1^st batch cows.

Insurance: The animals and other assets (sheds, equipment) must be insured. Wherever necessary, Risk / Mortality fund may be considered in lieu of dairy insurance.

I. INTRODUCTION

Nations are growing with pace in technology and technological advancements. Till the end of 20th century development was the priority of entire planet earth but in the ending of the 20th century it was realized by almost all countries that development cannot go alone but it has to have the social, economic and environmental concerns. It was realized by the United Nations in Rio Conference on Environment and Development, 1992 that there is need of sustainable development. Now in 21st century the technological advancements are needed to be utilized for saving the planet earth from the curse of climate change and global warming reducing the carbon emissions across the entire planet earth. The argument in this paper is based on, how far technological advancements and technology transfer, by developed countries to developing countries can be facilitated in reduction of the carbon emission and greenhouse gases, through legally binding norms? How there should be synergy in between technologies reducing carbon emission and IPR issues?

5.1 Technology readiness levels- Introduction
Technology readiness levels (TRLs) is measurement of the maturity level of a particular technology. These are based on a scale from 1 to 9, with 9 being the most mature technology. It is a map that shows whether a given technology is in a conceptual state or can be used in real-world applications and ensures innovations are thoroughly tested before being applied on a large scale. The TRL scale uses a set of questions designed to measure progress of a technology toward maturity. They help in reducing risks and improving efficiency. TRLs were initially designed in the 1970s for use by NASA to assess how prepared a technology was for space missions. Technology for space travel is always extremely sophisticated and with a high degree of risk. NASA required a system to assess systematically whether or not a new technology was ready to implement. By breaking down development into different levels, NASA was able to provide informed decisions on which innovations were ready to incorporate (figure 12). In due course, TRL proved to be so effective that other industries began to use it. Other entities like the European Space Agency (ESA), U.S. Department of Defense (DoD), BIRAC, DRDO and many other agencies have taken , to using TRL to guide R&D strategies. TRL helps in simplifying development, decreasing risks, and maximizing resource utilization.

Technology Assessment and Refinement
What is Technology Assessment?
Technology assessment serves as a method or tool for forecasting future technological needs. It helps in envisioning or predicting potential technological developments required by users and in identifying areas where existing technologies can be improved. In agriculture, evaluating a technology means understanding its worth or effectiveness. This evaluation can be done by researchers, farmers, or other relevant stakeholders. The knowledge obtained from such evaluations is essential for creating new technologies, improving existing ones, and ensuring their successful adoption by end users.
The approach to technology assessment varies depending on who is conducting the evaluation, the purpose behind it, and the specific characteristics of the technology being assessed. It is commonly defined as the organized and intentional use of knowledge, skills, and experience to carry out a task or deliver a service that contributes to the well-being of society.
Technology Assessment: Definition and Objectives
According to Strasser (1972), technology assessment is a structured approach to planning and forecasting that identifies various options and associated costs. It considers not only economic factors but also environmental and social impacts, both internal and external to the technology being evaluated. The assessment places emphasis on analyzing both the positive and negative consequences of technologies. As such, institutions involved in the development, refinement, and dissemination of agricultural technologies have a significant stake in conducting technology assessments.

Basics of Technology Commercialization
Technology, a ubiquitous force shaping our world, can be understood from various angles. Here’s a breakdown of its definition, functions, and the fascinating process of its advancement.
Definition
At its core, technology is the application of scientific knowledge for practical purposes. It’s not just about gadgets and gizmos; it encompasses a vast array of systems, processes, and tools that we use to transform the world around us and solve problems. This includes everything from the humble wheel to the intricate workings of artificial intelligence.
Functions
Technology serves a multitude of functions, broadly categorized into:
Simplifying tasks: From automated manufacturing to self-driving cars, technology automates and streamlines processes, saving time and effort.
Enhancing communication and connection: From the internet to social media, technology bridges geographical barriers and fosters global interaction.
Expanding our knowledge and understanding: Scientific instruments, telescopes, and advanced data analysis tools enable us to explore the universe, delve into the microscopic world, and gain deeper insights into various fields.

My definition of a ‘Developed India’ is “when the quality of life in our rural areas becomes comparable to that in the non-urban areas of already developed countries”. Another way of looking at development is to look at ‘Measures of Development’. Unlike the three used by United Nations, viz. per-capita Gross National Product, life expectancy at birth and adult literacy, I have been suggesting for a long time that the appropriate measures of development for a developing country are only two – per capita electricity consumption and female literacy. Availability of electricity is essential to provide the basic amenities like pure drinking water and proper health care and to develop rural industries. And also, without near-hundred per cent literacy and without societal equity – evidenced inter-alia through gender non-discrimination – the fruits of science and technology (S&T) will not fully reach rural India.

Technology Foresight to Become a ‘Developed’ Country

Choosing the right technologies to put the nation on the part of rapid development requires technology Foresight. Technology foresight must be distinguished from Technology Forecasting, which attempts to predict future technological developments, without worrying about the impact of these developments on the economy, society or the environment. Technology foresight adds assessments from economic, social, environmental, security and even ethical points of view to technology foresight. One may often get different answers from such analysis depending on whether you are from India or say, from the United States of America, to the need for technologies like, for example, fast breeder reactors or rural food processing.

Basics of Technology Incubation
Technology incubation is a fascinating process that fosters the growth of innovative startups and businesses with high-potential technology. It provides a supportive environment and resources for early-stage companies to develop their ideas, validate their business models, and navigate the challenges of commercialization.
Here’s a breakdown of the key aspects of technology incubation: What happens in a technology incubation?
Pre-incubation: Startups with promising ideas can receive initial guidance and support to refine their concepts and develop a business plan.
Incubation: Selected startups gain access to shared office space, mentorship from experienced professionals, networking opportunities, and access to funding sources.
Post-incubation: Graduated startups continue to receive support in areas like marketing, legal advice, and investor relations as they scale their businesses.
Benefits of Technology Incubation
Reduced risks: Startups can test their ideas and validate their market potential before investing significant resources.
Access to resources: Incubators provide vital resources like office space, equipment, and software, reducing the financial burden on startups.

Technology Promotion
The activity of promoting the transfer of technology by creating opportunities, advertising and organizing technology events.
Promotion is a marketing tool, used as a strategy to communicate between the sellers and buyers. Through this, the seller tries to influence and convince the buyers to buy their products or services. It assists in spreading the word about the product or services or company to the people. The company uses this process to improve its public image. This technique of marketing creates an interest in the mindset of the customers and can also retain them as a loyal customer.
Promotion is a fundamental component of the marketing mix, which has 4 Ps:
1. Product (Warranty, features, variety, quality, design, packaging, brand name)
2. Price (List price, discounts, payment terms, credit)
3. Place (channels, coverage, Types of promotion locations, transportation, inventory)
4. Promotion (advertising, self-marketing/personal, sales promotion, public relations, direct marketing, trade shows, events).