eChapters

Abstract

Classification of the hundreds of possible dryers is essential to the logical selection of appropriate dryer for a given application. Diverse criteria for classification as well as selection of dryers are presented and discussed briefly. The advantages and limitations of different dryer types must be taken into consideration. Initial capital cost is often the key deciding criterion in industrial dryer selection. This is not a good strategy as the user must pay for the operating costs over a long period of life of the dryer. In general several different dryer types are suitable for a given product. Careful selection is essential for cost-effective operation of the dryer.

Classification of market

There are several bases on which markets are classified.

a. On the basis of location

On the basis of the place of location or operation, markets are of the following types:

Village market

A market which is located in a small village, where major transactions take place among the buyers and sellers of a village, is called a village market.

Primary markets

• These markets are located in big towns near the centres of production of commodities. In these markets, a major part of the produce is brought for sale by the producer-farmers themselves. Transactions in these markets usually take place between the producers/farmers and traders.

Improvements in microscopes enabled scientists to study the ‘invisible’ organisms – that is, those too small to be seen with the naked eye. They were able to show that certain of these microscopic creatures are responsible for the infectious diseases of higher organisms. Most of them are harmless, some are essential for life and some are used in the manufacture of products that are of benefit to humans.

LAB constitutes a group of gram positive bacteria. They are nonsporulating, nonrespiring but aerotolerant cocci or rods, which produce lactic acid as one of the main fermentation products of carbohydrates, they do not have cytochromes. They belong to the phylum Firmicuttes, class Bacilli and order Lactobacillaceae. The group includes several genera such as Lactobacillus, Lactococcus, Bifidobacterium, Pediococcus, Enterobacter, Corynebacterium, Streptococcus, Leuconostoc etc.

Classifying wool is crucial in the textile sector for upholding quality standards, enhancing processing techniques, and ensuring that wool satisfies particular market demands. Precise classification aids in choosing the appropriate wool type for a variety of products, ranging from apparel to carpets, and guarantees uniformity and performance across diverse applications.
Classification of Wool: Wool is categorized in a manner akin to hides and skins, based on its intended application. It is divided into three primary types according to fibre length: combing wool, clothing wool, and carpet wool. Long fibres are combed and twisted to produce worsted yarn, whereas shorter fibres are carded and blended in various directions to create woollens. Carpet wool is characterized by an average fineness of 30 to 50 μm and a medullation percentage between 15% and 68%. The quality of wool is influenced by factors such as breeding conditions, climatic conditions, diet, and overall care. For example, excessive moisture can strip natural grease, while colder climates lead to tougher, heavier fibres. Consequently, wool can be classified in two distinct manners:
A. By the sheep from which it is sourced, and
B. By fleece

Wool is a fibre basically composed of amino acids and have excellent absorbency, moisture regain capacity, tend to warm the human body if used in form of cloths and others, good in elasticity and resiliency but poor in resistance to alkali but acid tolerance is good. To get better utilization of wool, they may be classified into various categories based on their origin, fleece quality, fineness of wool fibres etc.

There is no single factor as important in the production of fine quality dairy products as absolute and complete cleanliness.

R.B. Barrett

It is not enough to provide milk for man, it must be high quality milk. It would be impossible to provide man with milk and milk products of superior quality if we were unable to remove milk soil and to kill residual microorganisms. Respectively, these are the processes of cleaning and sanitizing.

To successfully provide the atmosphere for proper food safety, the basics must be thoroughly understood. The basics of food safety begin with good understanding of sanitation processes, food-handling procedures that protect from, or eliminate cross contamination problems and specific attention to inspection of and follow up for all processes. Food safety activities need to be programmed into available time of day scheduling just as production requirements do. Whether special personnel or separate shifts handle cleaning responsibilities or you clean as you go on the production line, time must be made available. Safe products leaving the facility must be the watch word of all employees involved with the process.

In order to ensure safe food supply a high level of sanitation should be maintained throughout the food production chain. The word ‘sanitation’ is derived from the Latin word “sanitas” which means “health”. To further apply this word to the food industry, sanitation is the creation and maintenance of hygienic and healthful conditions when processing, preparing and handling food. Sanitation is the application of science to provide wholesome food handled in a hygienic environment by healthy food handlers to prevent contamination by food spoilage microorganisms. Effective sanitation refers to the mechanisms, which accomplish these goals.

Cleaning and sanitizing of dairy plants is essential for providing safe milk products to the consumers as well as for ensuring the good shelf life of these products. It ensures cleanliness, hygiene of the equipments and surroundings and also ensures that the products meet the safety standards. Cleaning of dairy plant consists of broadly of removing the soil from the surface of the equipment by dissolving or suspending the soil in a warm solution of suitable cleaning agents. In the dairy industry, the soil is primarily milk and milk product residues which may be more or less modified by processing treatment. 
Milk and milk product residues are complex mixtures of milk sugar, fat, proteins and mineral salts. Some of these solids are present in emulsion, some are in a colloidal state, and others are in true solution. When milk products are heated in vats or pumped through sanitary pipe lines or over coolers, the metal or glass surfaces become coated with milk remains, which, if allowed to dry, may be difficult to remove.

Cleaning and sanitation are essential for maintaining microbiological safety in ice cream manufacturing, particularly because contamination can occur after pasteurization and freezing does not eliminate all microorganisms. This chapter explains contamination routes, hygienic zoning, cleaning systems, sanitization practices, HACCP principles, and microbiological expectations within an ice cream plant. It examines CIP and COP systems, detergent components, cleaning factors, high-risk equipment and surfaces, and post-pasteurization contamination control. Particular emphasis is placed on preventing biofilms and controlling contamination at filling equipment, tanks, pipelines, feeders, drains, packaging areas, and personnel interfaces. The chapter provides practical sanitation guidance to support food safety, product stability, regulatory compliance, and consumer protection

Introduction
• The source of contamination of meat plant is largely from the animals entering in the plant
• Severely contaminated hide/skin are the major source of abattoir contamination
• If proper hygiene of employees, equipments and clothing is not followed, then even after skinning 10,000 to 100,000 bacteria/ in2 can be detected
• Blades of knives can carry 80,000 to 40 millions bacterial per blade & hands of meat operative can have 3x109 bacteria/g of scrapings
• The chance of contamination of carcase is greater at the point of incision and minimum at the farthest point from the incision place
‘Scotoma effect’ or ‘factory-blindness’
• Persons working in any factory or abattoir on routine basis slowly and slowly becomes unaware (mentally ‘blind’) about any sub-standard hygiene or cleanliness problem existing in the surrounding
• This effect is known as ‘scotoma’ or ‘factory-blindness’
• Effect can be powerful and the any visitors to that factory or abattoir will instantly notice that sub-standard hygiene or cleanliness problem neglected by the persons working there

Introduction

The Intergovernmental Panel on Climate Change (IPCC) assessment reports (IPCC, 2007) suggests that consequently occurring climate extremes are likely to increase the frequency and intensity in the future. In the Indian context, events such as landfall of rare of rarest most intense pre-monsoon Tropical cyclone Fani (2019), back to back landfall of very intense tropical cyclones such as Phalini (2013) and Hudbud (2014), Cyclone Komen (2015), Extreme rainfall events of Kerala (2018 and 2019), Heavy rainfall events of over Northeastern states of India (2019), Cloud burst events of Uttarakhand (2013), Rainfall over Himachal Pradesh (2019), Mumbai Rain fall (2015) and extreme heat wave conditions of 1998, 2015 and many similar type of extreme events are not usual. However, at present there is no unanimity among scientists to exclusively and directly link such extreme weather events to climate change, however based on number of studies and observation data sets it is agreed that the impact of climate change is evident (beyond the natural variability) in many part of the globe including India. In 2019 monsoon season at least 1351 deaths happened to ?oods, heavy rainfall and landslides compared to 1550 for year 2018. In this manuscript, recent research findings related to extreme weather events in the context India are discussed in the following section-2, need for high resolution and long term data sets are emphasized in section-3, followed by recommendations as part of future preparedness, that will not only enable us to address these issues in a robust scientific manner but also provide us strong resilient society to face these extreme weather events in an optimized and effective manner to minimize the loss of lives, properties and socio-economic conditions of citizens.

Introduction

Climate change has been realised during 1840s when indisputable evidence of former ice ages was obtained. The climate has altered sufficiently in many parts of the world even within the last few decades which will affect the possibilities for agriculture and settlement. Reliable weather records have been kept only during the last hundred years or so, but proxy indicators of past conditions from tree rings, pollen in bog and lake sediments, ice core records of physical and chemical parameters, and ocean foraminifera in sediments provide a wealth of paleoclimatic data. The standard interval adopted by the World Meteorological Organization for climatic statistics is thirty years:1901–30, 1931–60, for example. However, for historical records and proxy indicators of climate, longer, arbitrary time intervals may be necessary to calculate average values. Tree rings and ice cores can give seasonal/annual records, while peat bog and ocean sediments may provide records with only 100- to 1,000-year time resolution. Hence, short-term changes and the true rates of change may, or may not, be identifiable.

The present climatic state is usually described in terms of an average value (arithmetic mean, or the median value in a frequency distribution), a measure of variation about the mean (the standard deviation, or interquartile range), the extreme values, and often the shape of the frequency distribution. A change in climate can occur in several different ways, for example, there may be a shift in the mean level, or a gradual trend in the mean values. The variability may be periodic, quasi-periodic or non-periodic, or alternatively it may show a progressive trend . First, it is important to determine whether such changes are real or whether they are an artefact of changes in instrumentation, observational practices, station location, or the surroundings of the instrumental site, or due to errors in the transcribed data. Even when changes are real, it may be difficult to ascribe them to unique causes because of the complexity of the climate system. Natural variability operates over a wide range of time scales, and superimposed on these natural variations in climate are the effects of human activities.

Introduction

In India, almost 85 % of our population resides in rural areas and the same proportion is dependent on agriculture for sustenance and animal husbandry for additional income. Distribution of livestock is more equitable compared to that of land and about 85 percent of livestock are owned by the landless, marginal and small landholding families. This sector provides employment for the farmers through livestock farming as well as in processing, value addition and marketing of livestock products.

Rapid population, economic growth, increased demand for livestock products such as meat and dairy products, in?uences the present livestock production systemtowards intensive production. There is increased con?ict over scarce resources such as land, water, food grains etc. Losing livestock assets for rural communities might lead to abject poverty with serious effect ontheir livelihoods. The climate change impact will worsen the vulnerability of livestock systems and those farmers depending on livestock, particularly the poor.

Globally, the climate change is clearly evident in the form of changing weather pattern, and this has direct and indirect bearing on livestock production. Scientific evidence from multiple resources indicates that, without a doubt, climate is changing. It is also possible to suggest with increased confidence that climate is changing because of increased human activities which have serious repercussions on social and economic development. Greenhouse gases absorb heat from the sun in the atmosphere and reduce the amount of heat escaping into space. This extra heat has been found to be the primary cause of observed changes in the climate system over the 20th century. Livestock make a necessary and important contribution to global calorie, protein supplies and important micro nutrients such as B12, iron, calcium. They produce 17% of calories consumed globally and 33% of protein. Livestock can increase the world’s edible protein balance by transforming inedible protein found in forage into forms that people can digest. Climate change poses serious threats to livestock production. Various climate model projections suggest that by the year 2100, mean global temperature may be 1.1–6.4 °C

Introduction

Climate change has been, and continues to be one of the important causes of low productivity from animal agriculture in tropical countries like India through crop failures, fodder scarcity and increased incidence of endemic animal diseases. It impacts animal agriculture and cause immediate danger for human societies as livelihoods and food production are being adversely affected. Farm ruminant animals contribute to food supply by converting low-value materials, inedible or unpalatable for human, into milk, meat, and eggs and directly contribute to nutritional security. Besides contributing over one-fourth to the agricultural GDP, it provides employment to 18 million people in principal or subsidiary status in India. Nearly two-thirds of farm households are associated with farm animal rearing and 80% of them are small landholders (≤2 ha). As a result of various socio-economic and market driven factors, during the last one decade, large scale transformation took place in both extensive and intensive animal agriculture with regards to type and breed of the animal. A lot of high yielding, low disease resistant and more vulnerable crossbreed animal population have been increased in present animal production systems inorder to meet the market demands. Climate changes could impact severely the economic viability and production of these intensive animal production systems through increased incidence of drought/?oods/cyclones/hailstorms etc. Drought and high ambient temperatures in particular, affects production of milk, meat and egg, reproduction, health of animals and condition of pastures. Changes in pasture and crop biomass availability and quality affect animal production through changes in daily or seasonal feed supplies. Heavy rains and associated ?oods would washout the fodder resources and animals. Recent incidences of severe hail storms are causing brutal injuries to the grazing animals. To mitigate the adverse affects of extreme weather events and cope with changing climate, much precised resilient technologies suitable to local conditions and resources are needed. Hence, one should be critical in recommending smart animal-agriculture technologies in view of much diversified and heterogeneous group of farmers and the resources accessible to them. This will help in sustainable productivity from animal-agriculture and profitability to the farmers even in the era of climate change.

Introduction

Climate change is one of the important areas of concern for world to ensure food and nutrition security to the growing population. The impacts of climate change are global but development countries like India are highly vulnerable as large population depends upon agriculture and allied service. As per the latest report, the global average temperature rises is 0.99⁰C (NASA, 2016) since pre-industrial time (1850). The year 2016 ranks as the warmest year, 16 of the 17 warmest years in the 136 years record all have occurred since 2001. The predicted temperature rise for India is in the range 0.5-1.2⁰C by 2020, 0.88-3.16⁰C by 2050 and 1.56-5.44⁰C by the year 2080. Studies in India showed significant negative impacts of climate change, predicted to reduce yields by 4.5 to 9.0%, depending on the magnitude and distribution of warming. Agriculture sector is contributing about 17.4% of India’s GDP, a 4.5-9.0% negative impact on production implies a cost of climate change to be roughly up to 1.5% GDP per year. Therefore, Govt. of India has accorded high priority on research and development to cope with the climate change in general and agriculture and allied sector. The Prime Ministers National Action Plan on Climate Change has Identified Agriculture and allied sector as one of the 8 national Missions. Agriculture and the future of global food security figure very importantly in climate change negotiations. As stated in Article II of the United Nations Framework Convention on Climate Change (UNFCCC), the goal is to ensure stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent “dangerous anthropogenic interference with the climate system”. With this background to meet the challenges of sustaining domestic food production in the face of changing climate and to generate information on adaptation and mitigation in agriculture to contribute to global for a like UNFCCC, the Indian Council of Agricultural Research (ICAR) launched a flagship network project National Initiative on Climate Resilient Agriculture (NICRA) during XI plan in February 2011, and during XII Plan it is referred as National Innovations in Climate Resilient Agriculture (NICRA).

Climate
This refers to the long-term statistical data of temperature, humidity, wind, precipitation, atmospheric particle count, and many other meteorological parameters in a particular area. However, weather refers to the current state of these same elements over a maximum of two weeks. The statistical long-term representation of the shortterm weather is called climate. A region’s “climate” is its average long-term weather. Temperature and readiness determine the climate. The variations between the average circumstances at two different times can be used to define changes in the climate. The atmosphere, seas, ice sheets (cryosphere), living things (biosphere), and soils, sediments, and rocks (geosphere) all contribute to and are a part of the global climate system.
When the sun falls on moisture droplets in the earth’s atmosphere, a spectrum of light appears in the sky, creating an optical and meteorological phenomenon known as a rainbow.
A wilderness is an area of the planet’s natural ecosystem that has not seen major alterations from human activities.
The atmosphere, a body of gases or air around the earth, shields it from harm and makes life possible. The planet’s atmosphere is primarily made up of nitrogen, with only 21% being oxygen; the remaining little portion is made up of carbon dioxide and other gases. The earth is divided into five separate layers, ranked from lowest to highest:

Introduction

The animal husbandry and agriculture are the major resource of income for the farmers and directly affects the economic conditions of farmers. Livestock sector plays a vital role for livelihood food security in India. Buffalo plays an important role in dairy industry and contribute 49 per cent of total milk production in India (BAHS, 2017). Murrah is one of the best buffalo breeds in the world and also widely used for up-gradation of non-descript buffaloes in India. Murrah buffalo have poor thermoregulation mechanism compared to other domestic ruminants in tropical countries and are more prone to heat stress due to very less sweat glands, jet black colour and thin hairs on body surface (Das et al., 1999; Khongdee et al., 2013) which reduce the ability of cutaneous evaporation and largely responsible for its low productivity and consequently reducing the reproductive efficiency (Gudev et al., 2007). India continues to be the largest milk producer in the world since 1997. Milk production has increased from 165.4 million tonnes (2016-17) to 176.4 million tonnes (2017-18) (DAHD, GOI). The demand for milk is increasing at a very fast pace due to exponential population growth and the gap in the production and supply is increasing. Out of 300 million bovines, only 88 million are in milk leaving large unproductive animals including 84 million males (19th Livestock census, 2012). If the gap of production and supply is to be bridged, the large number of constraints that affect reproductive efficiency and productivity of dairy animals must be addressed effectively. One important factor that can contribute to the productivity of animals is qualitative production and quantitative adequacy of semen doses for A.I.

Climate change may manifest itself as rapid changes in climate in the short term or subtler changes over decades. Generally, climate change is associated with an increasing global temperature. Various climate model projections suggest that by the year 2100, mean global temperature may be 1.1–6.4 °C warmer than in 2010. The difficulty facing livestock is weather extremes, e.g. intense heat waves, ?oods and droughts. In addition to production losses, extreme events also result in livestock death (Gaughan and Cawsell-Smith, 2015). Animals can adapt to hot climates, however the response mechanisms that are helpful for survival may be detrimental to performance. In this article we make an attempt to project the adverse impact of climate change on livestock production. There is a two-way relationship between livestock production and environmental health.

Impact of climate change on livestocks

The potential impacts on livestock include changes in production and quality of feed crop and forage, water availability, animal growth and milk production, diseases, reproduction, and biodiversity. These impacts are primarily due to an increase in temperature and atmospheric carbon dioxide (CO₂) concentration, precipitation variation, and a combination of these factors. Temperature affects most of the critical factors for livestock production, such as water availability, animal production, reproduction and health. Forage quantity and quality are affected by a combination of increases in temperature, CO₂ and precipitation variation. Livestock diseases are mainly affected by an increase in temperature and precipitation variation.

Climate change is now a global phenomenon and its impact on livelihood health and wellbeing, and overall quality of life is not deniable. No country is free from the overall impacts of climate change, but poor people of developing countries have been disproportionately affected by the adverse effects. Vulnerability in the context of climate change is a function of sensitivity, exposure and adaptive capacities. Odisha is the 9^th largest state by area and the 11th largest state by population in India. The state has an area of 155,707 km², which is 4.87 per cent of the total area of India, and a coastline of 480 km. In the eastern part of the state lies the coastal plain. It extends from the Subarnarekha river in the north to the Rushikulya river in the south. The State is broadly divided into four geographical regions, i.e. Northern Plateau, Central River Basins, Eastern Hills and Coastal Plains. The climate of the state is characterized by hot summer and cold winter in the interior parts. The state has historically been highly prone to climate change and multiple hazards – mainly cyclones, droughts and ?oods. Natural disasters devastate millions of lives and livelihoods in Odisha each year. More children and women suffer from the effects of natural disasters and this is predicted to worsen as storms ?oods and droughts become more severe and frequent because of climate change.