eChapters

Introduction
India with a population of 1.30 billion people is highly focusing on “Development”i.e. good food, better health & living conditions for everyone. With the increase in the incomes, people can now afford better nutrition in the form of poultry egg and meat, now poultry industry has transformed from a mere backyard activity into a major commercial activity in just four decades. India is now the world’s 3rd largest egg producer and the 5thlargest producer of broilers. The Indian poultry market witnessed an increasing trend over the past five years, growing at a Compound Annual Growth Rate (CAGR) of 8.6% (DAHD, 2023). Poultry sector in India is valued at about Rs. 1,50,000 crore (2022-23) broadly divided into two sub-sectors – one with a highly organized commercial sector with about 80% of the total market share (say, Rs. 1,20,000 crore) and the other being unorganized with about 20% of the total market share of Rs. 30,000 Crore. (DAHD, 2023). Poultry production in India has become a profitable and most popular income generating sector for the educated unemployed youth. Most of the poultry farmers are interested in broiler production due to its quick returns, less space requirement and higher weight gains. The productive potential of poultry in India has not been fully exploited due to deficit feed resources and unutilization of available improved technologies for getting high productivity from the poultry at economical rate. Hence, it is essential to further enhance the feeding value of available feed resources so as to improve the efficiency of feed utilization and minimize the cost of feed per kilogram live weight gain. The use of antibioticas growth promoters in poultry has been banned due to concern about their residues in tissue and induction of bacterial resistance. Due to these concerns, recently many feed additives has been investigated for alternatives tofeed antibiotics. The international feed industry is facing the challenge of the awareness among the consumers of meat on the risk of bringing about antibiotic resistance in pathogenic microbiota through antibiotics used in animal and poultry feeds. It has directed them towards the non-antibiotic feed additives. Among them, the feed additives of plant origin, called as Phyto-additives or Phytogenic Feed Additives (PFA) or Phytobiotics are considered to be a better alternative as non-antibiotic growth promoters, even though there are well established non antibiotic growth promoters such as organic acids and probiotics. The Phytogenic feed additives also vary widely in their botanical origin, processing and composition. They have been used in solid, dried and ground forms or as extracts or essential oils.It is reported that aromatic plants may increase feed intake and may improve secretion of endogenous digestive enzymes. It has been shown thatthe dietary incorporation of herbs may provide beneficial effect on poultry performance and health due to the antimicrobial activity of their phytochemical components. Phytobiotics have gained increasing interest as natural growth promoting feed additives in broiler production in recent years. These have wide range of medicinal properties with no residual side effects and are best alternatives to antibiotic growth promoters (Chaudhary et al., 2018, 2019, Rahman et al., 2014). Beneficial effects of these substances in poultry nutrition are due to their high content of pharmacologically active compounds stimulating appetite and feed intake, improving endogenous digestive secretion and activating immune responses (Nouzarian et al., 2011 and Toghyani et al., 2010).

Abstract

Noodles are widely consumed throughout the world and their global consumption is second only to bread. In the study, response of reducing agents (cysteine hydrochloride and sodium metabisulphite) and oxidizing agents (potassium bromate and benzoyl peroxide) at 10 and 20 ppm levels on the farinographic and amylographic curve characteristics as well as on the noodle making properties of durum and commercial wheat semolina were investigated according to the AACC (1990) procedure. The farinographic curve characteristics revealed that water absorption was enhanced with increasing levels of reducing agents but decreased with addition of oxidizing agents. However there was no significant change in Dough Development Time in case of durum semolina on addition of reducing agents, but commercial semolina recorded significant changes at 20 ppm level of reducing agent. The best reducing agent for durum and commercial semolina was thus sodium metabisulphite and cysteine hydrochloride respectively. Addition of oxidizing agent potassium bromate at 20 ppm level enhanced stability and was thus chosen as the best oxidizing agent for durum semolina and benzoyl peroxide for commercial semolina. Addition of reducing and oxidizing agents improved yield, appearance, elasticity and extensibility characteristics of instant fresh noodles. The best levels were used in the preparation of noodles on the Italian extruder (NAMAD).

Abstract

Re-constituted rice-premixes made by extrusion, has been successfully formulated for the fortification of market rice with vitamin A (retinyl palmitate and betacarotene) and iron. The statistics of vitamin A deficiency (VAD) and Iron deficiency anaemia (IDA) are alarming in the developing world, particularly in India. In fact, India is second largest producer as well as consumer of rice in the world, so fortification of rice with vitamin A and iron seems to be a successful solution to reduce the VAD and IDA in India. In order to design the final formulation, eight formulations containing target micronutrient profile were tested for vitamin A (both retinyl palmitate and beta-carotene) and iron retention for a period of six months under ambient (24-26 ⁰C) and elevated temperature (40 ⁰C) conditions. Nonsignificant iron loss was observed during six months of storage time under both ambient and elevated conditions. The higher retention of retinyl palmitate and beta-carotene was observed in formulation 5 and 8 respectively. In F5, the retention of retinyl palmitate was 73% and 66% and in F8, retention of beta carotene was 70% and 63% under ambient and elevated temperature conditions respectively after six months of storage. Substituting the original, vegetable shortening with palm shortening resulted in increased retention of retinyl palmitate and beta carotene in formulation 5 and 8. Thus, increased antioxidant effect of natural antioxidants in palm shortenings contributed to stability of micronutrients.

Introduction

The town Paithan is famous by it’s name Dakshin Kashi. Godavari river has pristine glory and great significance for Hindus.

Nath temple is situated on the bank of Godavari river. It is a holy place and that’s why it becomes a place of public gathering on Ekadashi, Aashadi Ekadashi, Poornima, Deepawali, Dasera etc. Every year during Chaitra lakhs of people gather.

But at the time of Sheshti, which occurs once in a year is a special event. Hence many fold increase of congregation compared to other melas. The particular small stretch of river near temple was highly polluted, due to mass bathing and other polluting activities. The warm weather shall alter the photosynthesis rates, biodegradation and affect BOD, DO, pH etc. Recent Nath Sheshti at Paithan during 20^th March to 22^nd March 2006, drew about one lakh of pilgrims and had a few special aspects of interests from an environmental point of view.

Considering all the above aspects, it was decided to assess the changes in quality of river Godavari during Nath Sheshti.

Introduction
A microorganism or microbe is a tiny living thing that can exist as a single cell or in groups of cells. People have suspected the existence of these unseen microbes since ancient times. These single-celled creatures have caused serious infections that often led to deaths and illness. These microorganisms can spread quickly and cause big outbreaks of disease. In 1928, Alexander Fleming discovered the first antibiotic, penicillin. This discovery started the development of one of the most important groups of medicines in medical history. In the next three decades, many different types of antimicrobial drugs were developed. In his Nobel Prize speech, Fleming warned that using penicillin too much might one day lead to bacteria becoming resistant to it, which would be a major problem. Antimicrobial resistance (AMR) is one of the biggest public health challenges today. Many of the microbes that cause diseases, like bacteria, viruses, and protozoa, no longer respond to common antimicrobial drugs such as antibiotics, antivirals, and antiprotozoals. Antimicrobial resistance is when a microbe becomes able to survive and grow even when treated with medications that used to work on it. Antibiotic resistance is a type of AMR, but it only applies to bacteria becoming resistant to antibiotics. Resistant microbes are harder to treat, and doctors may need to use other medicines or higher doses. These options can be more expensive and have more side effects. Microbes that resist multiple antimicrobials are called multidrug resistant (MDR). Those that are resistant to almost all drugs are sometimes called ‘superbugs’. Antimicrobial prophylaxis is used by doctors to prevent infections, but it should only be used when it’s really needed to avoid unnecessary costs, side effects, and the development of resistance. Antimicrobial prophylaxis can be used to prevent a first infection or to stop an infection from coming back or reactivating.

Introduction

Increasing public concern regarding the use of pharmaceuticals in livestock feeding due to the emergence of drug resistance has led to an enhanced interest to plant derived bioactive compounds as alternative means to improve livestock health and production. Plants bioactive compounds are the plant secondary metabolites having pharmacological or toxicological effects in animals. Secondary metabolites are formed within the plants as well the primary biosynthetic and metabolic routes for compounds associated with plant growth and development, and are considered as products of biochemical deviate in the plant cells and not required daily for the performance of the plant. Some of them are found to have various important functions such as protection, attraction or signaling in the plants. Most species of plants seem to be competent in synthesizing such compounds. Plants with potent bioactive compounds are often characterized as both poisonous and medicinal, and a beneficial or an adverse effect may depend on the quantity eaten by the animal. Some tropical tree leaves and typical food and feed plants with bioactive compounds with less prominent effects, their intakes are usually considered as advantageous.

Abstract

Micronutrients and bioactive compounds must be part of the population's diet in sufficient amounts to meet the body's needs. The concentrations of micronutrients and bioactive compounds in plant foods at harvest are known to vary with such factors as the variety or cultivar, stage of maturity, geographic or climatic effects, etc. Most subclasses of polyphenols e.g., phenolics acids and flavonoids, the effects of processing on the contents were found negligible in comparison to the differences between varieties of plants but carotenoids are among the food components most affected by environmental and processing conditions. Thermal processing has long been known to cause significant losses of vitamins, carotenoids and anthocyanins. The heat treatment viz. blanching, pasteurization, sterilization etc. result in losses of thermally labile nutrients and bioactive compounds, but the inactivation of oxidative and other degradative enzymes (e.g., lipoxygenase for carotenoids, polyphenol oxidase for flavonoids, ascorbic acid oxidase for vitamin C). Nutrients in dehydrated products are more likely to undergo degradation during storage because of the greater surface area exposed to oxygen and light. Blanched products generally resist decomposition better than unblanched foods during storage. Compared to losses during processing, subsequent storage often has a small but significant effect on vitamin and bioactive compound contents. Reaction rates are relatively slow at ambient or reduced temperature. The processing method chosen, and storage condition applied finalise the retention of these compounds which decreases with longer processing time, higher processing temperatures and storage of the food.

12.1 Introduction

The eggs represent very good basis that can be enriched with useful and beneficial substances and become functional food, since certain beneficial substances which layers consume in their daily diets transfer relatively easily into their products. However, enrichment of poultry meat and eggs can have adverse consequences in regard to their quality. Functional food is interesting also from the economical aspect, because it opens for poultry producers the possibility to introduce new products into their product range. Of course, main assumption is that consumers of enriched products are willing to pay premium price for these products, which is by 15-20% higher than average product price. On a global basis, eggs are one of the most recognized and accepted foods by consumers.

2.1 Introduction

The biochemical environment for egg production and ovulation egg fertilisation is provided by the poultry oviduct. The chickens have two ovaries and an oviduct when they are hatched, but the growth of the right ovary and oviduct stops and regresses over time. The left ovary and oviduct are still functioning and help produce eggs. The oviduct is a long tubular structure that is divided into five functionally and histomorphologically distinct segments: the infundibulum, which is the site of fertilisation, the magnum, which produces egg white components, the isthmus, which forms the egg shell membranes, the shell gland or uterus, which produces the calcified eggshell, and the vagina (oviposition or egg laying).

This chapter introduces the principles used to preserve egg quality and extend shelf life after laying. It examines deterioration mechanisms during storage, including moisture loss, carbon-dioxide loss, albumen thinning and weakening of the vitelline membrane. Refrigeration, thermostabilization, shell coating, oiling, controlled and modified atmospheres, water-glass preservation and emerging non-thermal approaches are discussed. The chapter also introduces kinetic shelf-life modelling and time–temperature concepts for predicting quality deterioration. Emphasis is placed on maintaining an unbroken cold chain and controlling temperature and humidity during storage.

6.1 Introduction

The egg production in the country has increased from 78.48 billion in 2014-15 to 114.38 billion in 2019-20. India ranks 3rd in egg production in the world. Annual growth rate of egg production was 4.99 per cent during 2014-15, there after there has been a significant improvement in the egg production with 10.19 per cent growth registered in 2019-20 over the previous year. The per capita availability of egg was 86 per annum in 2019-20. Less than a generation ago the main supply of eggs was from small backyard unit. Processors, handlers, and distributors of eggs and egg products need an understanding of egg-production practices to cope more intelligently with problems of product quality and character

5.1 Introduction

The egg production in the country has increased from 78.48 billion in 2014-15 to 114.38 billion in 2019-20. India ranks 3rd in egg production in the world. Annual growth rate of egg production was 4.99 per cent during 2014-15, there after there has been a significant improvement in the egg production with 10.19 per cent growth registered in 2019-20 over the previous year. The per capita availability of egg was 86 per annum in 2019-20. Less than a generation ago the main supply of eggs was from small backyard unit. Processors, handlers, and distributors of eggs and egg products need an understanding of egg-production practices to cope more intelligently with problems of product quality and character.

This chapter introduces the processing of shell eggs into industrial egg products. It classifies products according to egg fraction and physical state, including whole egg, albumen, yolk, liquid, frozen and dried products. Breaking and separation operations, liquid egg production, pasteurization, freezing, dehydration, spray drying and desugarization are discussed. The chapter also covers quality control, packaging and storage of processed egg products. Particular attention is given to balancing microbiological safety with functional properties during pasteurization and processing.

This chapter introduces the concepts of internal and external egg quality and explains the methods used to measure important quality attributes. It covers shell quality, shell strength, cleanliness, shape, albumen quality, yolk quality, air-cell characteristics and freshness. Classical indices such as Haugh unit, yolk index and specific gravity are discussed alongside candling and modern non-destructive instrumental techniques. The chapter also explains how egg quality changes during storage through moisture and carbon-dioxide loss and provides a scientific basis for interpreting quality measurements and applying them in commercial grading.

21.1 Introduction

The egg industry has grown quickly in the last decade as people’s eating habits have become more aware of the importance of good and nutritious diets. Eggs are now widely accepted as a good source of high-quality protein. Increased demand in consumer choice has resulted in a wide variety of egg selection available in the retail market. Eggs of high quality are needed to sustain niche markets for specialty and designer eggs–seeking consumers. Egg quality defines those characteristics of an egg that affect consumer acceptability and preference. The parameters for egg grading include shell cleanliness, strength, texture, and shape; the relative viscosity of the albumen; and the shape and firmness of the yolk.

19.1 Introduction

Quality has been defined as the properties of any given food that have an influence on the acceptance or rejection of this food by the consumer. Egg quality is a general term which refers to several aspects of both internal and external quality. Internal egg quality involves functional, aesthetic and microbiological properties of the egg yolk and albumen. The proportions of components for fresh egg are 32% yolk, 58% albumen and 10% shell. The quality of an egg is at its best when the egg is laid. There is no known method by which this quality can be improved subsequently.

This chapter introduces systematic approaches for controlling biological, chemical and physical hazards throughout the egg chain. It explains the seven principles of HACCP and their application to shell eggs and egg products. Prerequisite programmes, GMP, GHP, FSSAI regulations, international regulatory frameworks, traceability, recall management and risk communication are discussed. A worked HACCP plan for liquid egg demonstrates how hazards and critical control points can be identified and controlled. The chapter emphasizes that egg safety requires an integrated farm-to-fork approach rather than relying solely on processing-plant controls.

11.1 Introduction

Egg contents may be contaminated via vertical or horizontal paths. In the former, bacteria may colonise the ovaries and/or oviduct, whereas in the latter, pollutants, such as faecal matter or dust, travel through the shell and colonise the membranes and yolk. The surface of a nest-fresh egg provides minimal protection against bacterial pollutants, resulting in the dominance of Gram-positive Micrococci in the shell microflora. Nonetheless, a variety of conditions have been demonstrated to either increase the survival of bacteria in the unfriendly environment of the egg’s shell surface or to impair the egg’s antimicrobial defence mechanism in other ways.

Introduction

Proper electrical wiring and earthing are crucial for laboratory safety and functionality. A laboratory houses several installations/equipment that demand stable/continuous power supply. Inappropriate or faulty wiring and earthing may lead to significant risks, including electrical shocks, damage to equipment, and even incidence of fire. Therefore, understanding the requirements of electrical wiring and earthing is essential for designing, construction, and maintenance of laboratory. This chapter aims to provide a basic knowledge of electrical wiring and earthing necessary for a laboratory. Importance of earthing in mitigating electrical hazards and ensuring integrity of electrical installations are also described.

Basics of Electrical Wiring

Basic understanding of electrical wiring is necessary for laboratory safety and efficient electrical functioning. The potential difference between two electrical points (negative and positive) is known as Voltage, which drives the flow of electric current. This is measured as volt (V). The rate of flow of electricity in a circuit is known as Current (I), which is measured as ampere (A). Current can be either direct (DC) or alternating (AC). Opposition/resistance experienced in the flow of current in circuit is known as Resistance (R) and it is measured in ohms (Ω). Higher the resistance means lesser the current flows at a given voltage. The rate at which electrical energy is transferred/utilized in an electric circuit is known as Power (P), which is measured in watt (W). The Power can be calculated as the product of voltage and current (P = V × I).