eChapters

Abstract

Foam Mat Drying (FMD) is an economical alternative to drum, spray and freeze-drying for the production of food powders. The raw material is converted into stable foam by adding foaming agent through beating or whipping in presence or not of foam stabilizers, and dehydrated by different classical airflow and thermal means. A high-quality food powder attributes can be obtained by the proper selection of foaming method, foaming agents, foam stabilizers, time taken for foaming, suitable drying method and temperature. FMD can be used for large production of food powders because of its suitability for all types of food materials, rapid drying at lower temperature, retention of nutritive value and bioactive compounds, good reconstitution characteristics and flowability and cost-effective for producing powders.

In this chapter, basics of foam and its structure, mechanisms of foaming, types of foaming agents and stabilizers for the production of stable foam have been discussed. The influence of foaming agents, foaming properties, thickness of foam and drying temperature on the drying characteristics of mat are also studied. This chapter analyzes the application of foam drying process for different food materials, the microstructure and whole quality attributes of obtained powder, and the energy consumption and costs of FMD as well.

Introduction

Since ancient times, addition of chemicals to food and food products has been done in order to to accomplish specific functions. Spices, smoke, vinegar, and alcohol were utilised to preserve foods more than 10,000 years ago. Usage of additives in food increased dramatically in the early 1900s, in tandem with advances in food chemistry and preservation. New, tasty, convenient, and healthy meals continue to be in high demand. As a result, by the early 1960s, over 2500 different types of additives were identified and utilized by developing countries in their diets. Basic foods are additive free, but as we increase the level of processing for conversion into an array of products, variety of additives are incorporated to increase the shelf life; to retain the nutritional value as well as to achieve higher standard of sensorial characteristics.

Food adulteration means anything adding or subtracting with food making it injurious to health. This adulteration may be done intentionally or unintentionally. Intentional adulteration is a criminal act and punishable offense. Or the process of lowering the nutritive value of food either by removing a vital component or by adding substances of inferior quality. Food Safety and Standards Act of India (FSSA) defined “adulterant” as any material which is or could be employed for making the food unsafe or sub-standard or mis-branded or containing extraneous matter”. According to Federal Food, Drug and Cosmetic Act (FFDCA), the primary food safety law administered by the Food and Drug Administration (FDA), food can be declared adulterated if:

1. a substance is added which is injurious to health
2. cheaper or inferior quality item added to food
3. any valuable constituent is extracted from main food article
4. quality of food is below the standards
5. any substance has been added to increase bulk or weight
6. to make it appear more valuable

Food adulteration is an unethical and often criminal malpractice. It is very common in countries of the South-East Asia region. It frequently occurs where informal food production and marketing services are predominant and enforcement of food regulation is weak. The prohibited substances are either added or used to partly or wholly substitute healthy ingredients. This creates the impression of freshness in old food artificially. Adulteration in food is usually done for financial gain. The high target is spices due to the demand and also their high price. Sometimes it can happen due to lack of proper hygienic conditions of processing, storage, transportation and marketing. The consumer is either cheated financially or becomes a victim of illness or disease. In case, the consumers take a lot of precautions at the time of purchase of such products it would help them in avoiding the purchase of such adulterated food. The whole spices: Dirt, dust, other seeds; chili powder: brick powder, salt powder or talc, powder. In ghee/butter: vegetable ghee, animal fat, mashed potato, sweet potato, etc. ; ice cream and beverages:saccharin; honey: jaggery, sugar syrup. Food contaminants are not added to the foods. They are present in foods as a result of the production (crop farming, animal husbandry and aquaculture), manufacture, processing, preparation, treatment, packing, packaging, transport or holding of such food or as a result of environmental contamination. Usually it includes the presence of harmful chemicals or microorganisms in food, which if consumed can cause several debilitating illnesses. Many times, unknowingly, the contamination may occur during the production, processing, storage and marketing.

Introduction

In the ancient era, adulteration was practiced as economical fraud like the addition of water to milk and stone to grains and pulses but nowadays it has become a global concern due to adverse health effects of adulterants on a human being. Words like substitution and admixture can help define adulteration. In general, adulteration is defined as either removal of valuable constituents from food or intentionally/ unintentionally addition of substandard quality material to degrade food quality. Food adulteration not only negatively affects the quality of food products but also results in numerous adverse health effects along with significant economic problems (Cheng et al., 2015).

Introduction

The concept of feeding system of different aquatic components of the aquaculture is not simple like that of domestic animals where feed, feeding and the animals can be observed closely and manipulated at once. In case of aquaculture both biotic and abiotic factors play an important role in feeding as well as the growth of the animal. Factors like water temperature, dissolved oxygen, light intensity, etc. regulate the intake of feeding, its digestion and assimilation. Conditioning factor, feed conversion rate, survival rate, percent weight gain, daily weight gain, specific growth rate are some of the parameters used routinely to monitor the effects of feeding on growth performance of the fish.

In aquaculture, supplementary feed is provided in conjunction with the available natural food such as plankton, periphyton, benthic organisms, aquatic plants etc. Aquaculture is a feed-based industry, with artificial feed accounting for major expenditure exceeding 60% of total operational cost. In India, freshwater aquaculture is mainly carp-based, which accounts for about 89% of total aquaculture production (Ayyappan and Jena, 1998). Successful and sustainable aquaculture depends upon the provision of nutritionally adequate, eco-friendly and economically viable artificial feeds. Effective utilization of feed depends upon many factors such as acceptability of the feed, its digestion, assimilation etc. apart from other rearing management protocols.

Ice cream is not only an indulgent frozen dessert but also a food containing several nutrients derived from milk, cream, sugars, and other ingredients. This chapter examines ice cream from a nutritional and food-science perspective, focusing on its major nutritional components and energy contribution. It discusses milk fat, proteins, lactose, carbohydrates, minerals, vitamins, and the nutritional effects of formulation. The chapter also considers energy value, portion size, digestibility, and palatability. Understanding these factors helps explain why ice cream provides both nutritional and sensory value. The discussion provides a balanced foundation for evaluating ice cream as part of varied diets and developing products for different consumer requirements.

Introduction

Terrorism has been experienced throughout human history by unlawful violence against innocent population to achieve financial or religious or political objective (Rakesh Gupta, 1998). Terrorism has no geographic or geopolitical boundaries and is adapting to changes in the socio-political environment. Progress in the area of science and technology have the potential to be used for both beneficial and harmful purposes leading to dual-use dilemma. Of late, more scenarios are witnessed where the applications of well-intentioned scientific research are being used for vicious purposes. Earlier, terrorism has been associated primarily with physical acts of violence and crime. Eventually the global militant and terrorism strategies evolved to chemical, nuclear, radioactive explosive agents to biological terrorism. Recently, cyber terrorism controlled by computers has seen a new form of criminal activities (www.hannover-re. com).

Introduction
Food Chains
Food chains are made up of organisms that eat and are devoured by one another as a means of transferring energy from the source in plants. “The transfer of energy from plants through a series of organisms with repeated eating and being eaten” is one definition of it.
A food chain is the movement of energy from producers at one trophic level to consumers at the next. In a food chain, energy moves only in one direction. An understanding of food chains can provide important insights into how ecosystems work.
• Grazing food chain
Grazing food chains and detritus food chains are the two main categories of food chains.
The food chain known as grazing begins with living green plants, moves through grazing herbivores, and ends with carnivores. Such a food chain places an immediate demand on ecosystems for solar radiation. From an energy perspective, these chains are very significant.

Food Hygiene is a scientific discipline describing handling, preparation, and storage of food in ways that prevent foodborne illness. This includes a number of routines that should be followed to avoid potentially severe health hazards. Food can transmit disease from person to person as well as serve as a growth medium for bacteria that can cause food poisoning. Since food hygiene has a direct effect on the health of individuals patronizing the catering facility, it is obligatory on the part of the management to lay down definite guidelines for maintaining hygienic conditions and ensuring their proper implementation. Cleanliness should be the basis of all food hygiene programmes and should be aimed at food protection as well as improving and maintaining the quality of food. 

Food poisoning is an acute illness resulting from the ingestion of injurious agents such as chemical, heavy metals, parasites, microbial toxin, wild species of mushroom in food. Food poisoning is commonly caused by certain bacteria or their toxins, which are the poisonous proteins that these bacteria produce. Food borne pathogens are potential global problem, more than 90 per cent of the cases of food poisoning are caused by bacteria, Staphylococcus aureus, Salmonella spp, Clostridium perfringens, Campylobacter jejuni, Listeria monocytogenes, Vibrio parahaemolyticus, Shigella dysenteriae, Bacillus cereus and enteropathogenic E. coli. These bacteria are commonly found in many raw foods. Generally a large number of food poisoning bacteria must be present to cause illness. In most of these food poisonings, the food serves as a vehicle of transmission. The role of food here is significant, since the product not only may permit the survival of the pathogens, but also may provide a suitable medium for the rapid multiplication of microbes and production of toxin. A more serious aspect of microbial contamination is the possibility of serious health hazards due to potential pathogenic organisms gaining entry into foods due to low standards of hygiene and sanitation.

Food poisoning may be due to food intoxication or food infection. Food intoxication and food infection differ in many characteristics (Table 17.1). Food intoxication refers to food borne illness caused by the ingestion of a microbial toxin preformed in the ingested food (Botulism). The most serious food poisoning caused by toxins is botulism, an often fatal disease that results from eating improperly canned foods containing the bacteria Clostridium botulinum. Classically, food intoxication is caused by the growth of Clostridium botulinum, Staphylococcus aureus, Bacillus cereus in food. Clostridium botulinum produces a neurotoxin, while Staphylococcus aureus and Bacillus cereus cultures produce enterotoxins in food.

Physical Methods of Food Preservation

Conditions too stressful for microbial growth can damage cells. Food environments can be manipulated to inhibit or kill microbes. Physical manipulation of foods can inhibit microbial growth, kill cells, or mechanically remove them from the food. Dehydration, refrigeration, and freezing inhibit microbial growth. Microbes can be killed by heating or ultraviolet (UV) or ionizing radiation. Non thermal energy is also lethal. Membrane filtration removes microbes from liquid foods. This chapter discusses all these physical preservation methods

Physical Dehydration Processes

Drying

When foods are being dried, hot air evaporates the water and carries it away. Both the drying temperature and the decreased water activity (a_w) affect the microbes.

During the initial period of drying, the temperature is still low and the relative humidity is high. The size and composition of the food particle determine the length of this phase. If this particle size is large and the material is dense, this phase can be long, allowing microbes to grow. During later phases of drying, the temperature is high but the relative humidity is low. This provides no opportunity for growth but is not very lethal either. The higher temperatures result in lower moisture content, and dry heat is less lethal than wet heat. If the drying lasts long enough (at least 30 min.), there are time-temperature combinations that kill microbial cells. With certain drying methods, the surface temperature may reach 100°C, while internal temperature remains lower. This kills surface microbes, but not those in the food’s interior.

Agricultural food production is increased by adopting scientific farming methods and another way to increase the availability of food is preventing the food spoilage by adopting food preservation methods. The global agricultural and fish production accounts for 50% of perishable food, which requires preservation. Only half of the perishable foods are properly protected. Application of innovative technologies to promote the production of food is indispensable to meet the demand of emerging populations. It is equally important to protect the stored food from the invasion of pests and diseases. A food saved is a food produced.

Food Processing and Preservation, branch of manufacturing that transforms raw animal, vegetable, or marine materials into tasty, nutritious, and safe food products. The industry has its roots in ancient times, as humans have always needed to obtain food and store a portion for later use. Prehistoric humans may have dried fruits in the sun and stored meat in cold areas, such as ice caves. The modern food processing and preservation industry was born in 1809, when French chef and inventor Nicolas Appert, searching for a better way to provide food for Napoleon’s army, devised a method for sterilizing food in tightly sealed glass bottles.

Today a wide variety of methods are available to maintain and enhance the appearance and taste of food. Food processing and preservation methods also create products that are convenient for consumers, such as products that are ready to eat or require minimal preparation and cooking. Combining these methods with modern distribution networks makes seasonal crops available year-round in grocery stores all over the world.

Food processing techniques range from traditional household practices to sophisticated industrial operations designed to improve safety, quality, nutritional value and shelf life. This chapter presents traditional methods such as blanching, fermentation, soaking, germination and malting, highlighting their effects on nutrient bioavailability and food characteristics. It then introduces industrial processing and distinguishes between thermal and non-thermal technologies. Thermal methods such as pasteurization and dehydration are discussed alongside innovative approaches including pulsed electric fields, high-pressure processing and irradiation. The chapter emphasizes the principles, applications, benefits and limitations of these techniques and demonstrates how processing conditions influence microbial safety, nutritional quality and sensory attributes.

Genetically modified organisms (GMOs) can be defined as organisms in which the genetic material (DNA) has been altered in a way that does not occur naturally. The technology is often called “modern biotechnology” or “gene technology”, sometimes also “recombinant DNA technology” or “genetic engineering”. It allows selected individual genes to be transferred from one organism into another, also between non-related species. Genetically modified (GM) foods are foods derived from genetically modified animals and marines. Genetically modified animals and marines are those in which specific changes introduced into their DNA by genetic engineering using a process of either Cisgenesis or Transgenesis. These techniques are much more precise than mutagenesis where animals and marines are exposed to radiation or chemicals to create a non-specific but stable change. Other techniques by which food animals can be modified are selective breeding and somaclonal variation. By this means desired quality of meat, egg and other animal products can be produced. But it is a common thinking that foods derived from genetically modified animals and marines are far from safe. They are likely to be contaminated by potent vaccines, immune regulators and growth hormones, as well as nucleic acids, viruses and bacteria that have the potential to create pathogens and to trigger cancer.

Henderson et al., (2010) have studied the different aspects of food regulation. The authors have looked into the perceptions of Australian consumers’ who is and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Personal responsibility for food safety practices was also identified. Little evidence is found in the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares. According to Wood (1990) the marketing of food service program in an Ohio district is directed toward the students and also at the community, school administrators, teachers, and employees. Students are encouraged to follow a healthier way of eating.Jones (1998) studied the role of food safety in the food chain from farm to fork. In response to growing threat of food-borne illnesses the federal government had launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Point’s system (HACCP). Under this it has been designed to make everyone in the food-delivery chain to be responsible for ensuring a safe food supply.

Over the past several years, there has been significant change in consumer perception on quality and food safety. Consumers are demanding healthy, nutritious and cost-effective products processed under controlled hygienic conditions. Food safety concern, in recent years, has become dominant and important. The requirement of food safety and quality assurance has never been so demanding as it is now. Globally food safety is being addressed independent of food quality. In anticipation of consumer demands on food safety, food sanitary standards at national and international levels are under constant review. Several inter governmental agencies/organizations are engaged in work related to quality assurance and food safety. Amongst these World Health Organization (WHO) and Codex Alimentarius Commission (CAC) play the major role in protecting public health and defining standards of quality and safety aspects of foods for regional and or world wide usage.