eChapters

This chapter introduces grading and standardization as mechanisms for converting biological variation in eggs into defined commercial specifications. It examines grade factors, quality classes, egg sizing and weight classification, and Indian standards including AGMARK and BIS. International approaches such as Codex, USDA and EU frameworks are compared. The chapter also describes automated grading equipment, candling, packing systems and packaging requirements. Particular attention is given to Indian egg-marketing channels, price behaviour, cold-chain requirements and consumer perception.

Abstract
 
Grains are usually harvested above 20% (wb) moisture level and they are prone to microbial attack at high moisture level. In order to avoid both qualitative and quantitative losses that arise from microbial growth, grains are usually dried to safe moisture level. The safe storage moisture content may vary from 8-16% (wb), depending upon the grain and climate type. Therefore, drying is a necessary step in preventing these losses. Drying also reduces the bulk weight of the materials, thus easing transportation and storage. Drying can occur in thin layer or in deep bed. Different drying theories are proposed to characterize these drying processes. Theoretical as well empirical drying equations have been developed.

15.1 Fondant

The word fondant is said to come from the French verb fondre to dissolve. Confectionery fondants are normally made by boiling a sugar and glucose syrup in order to concentrate it before the mixture is cooled with beating to produce fine sucrose crystals. Some fondants used in baking are made by mixing icing sugar with a sucrose and glucose mixture. The icing sugar has a small particle size because it has been milled whereas the sucrose in a crystallised fondant has small crystals. It is possible to make a fondant using dextrose instead of sucrose. Crystalline dextrose has a positive heat of solution, i.e. heat is absorbed, and this produces a marked cooling effect which goes well with a peppermint flavour, but one which is not particularly attractive economically, but they can be in some other countries.

Calorimetry

The process of measuring  the amount of heat generated by the combustion of a substance is known as calorimetry. The first successful calorimeter using oxygen under pressure for the combustion of substance in a closed vessel was devised by Berthelot in 1881. Subsequent development by Mahler in 1992, Atwater in 1899, and Parr in 1912, served to improve and to reduce the cost of the original Berthelot apparatus by variations in mechanical details.

Introduction

Water is one of the most complex natural resources demanding a comprehensive understanding of its inherent features in occurrence and distribution for an integrated planning aimed at optimum development for agriculture, health, industry, power, etc. The well being and development of our society is dependent on the availability of water. An increase in groundwater development and utilization for industries and urban water supply has created improper disposal of liquid waste. Defective well constructions, sewage and waste disposal in man made lakes within city, open quarries with water and failure to seal the abandoned wells in city area have provided possible openings for downward movement of polluted water into subsurface formations without undergoing the process of natural filtration.

Introduction

The International Organization for Standardization (ISO) is a global federation of national standards bodies. Its primary goal is to promote the development of standardization and related activities worldwide, thereby facilitating the international exchange of goods and services. Additionally, ISO focuses on fostering cooperation in intellectual, scientific, technological, and economic fields. The outcomes of ISO’s technical work are published as International Standards.

ISO 9000 The

ISO 9000 family of standards represents an international consensus on good management practices, aiming to ensure that organizations consistently deliver products or services that meet clients’ quality requirements. These practices are condensed into standardized requirements for a quality management system, applicable regardless of the organization’s nature, size, or whether it operates in the private or public sector. The ISO 9000 standards family includes:

Introduction

The present world wide situation of food items calls for a broad range of poultry alternatives to meet increasing demand of quality protein. Besides, complication involved in managing chicken, emergence of new diseases, increase in feed cost and increasing demand of poultry meat bound us to search for alternative species of poultry. In this circumstance rearing of Guinea fowl framed for centuries to meet poultry production requirements of diversified agricultural milieu. The traditionally reared Guinea fowl could become a significant source of food and also a source for substantial supplement income.

History
 
Guinea fowl a bird of West African origin came to India during mediaeval age. Now guinea fowl are being raised in the districts of eastern Uttar Pradesh and in some parts of Tamilnadu. The birds are very popular with marginal farmers and poor classes and are being largely kept as foragers and insectivorous under semi-range and range conditions.

Introduction

Climate change and pollution are the two major concerns that retard growth in animal sector particularly in a developing country like India. Pollution is directly contributed by human beings, while the former is also an after effect of continuous abuse of nature and natural resources. Hence these two areas are to be looked into seriously for country’s growth in general and animal production in particular.

Stress Effect

Stress is nothing but inability of an animal to cope with its environment, a phenomenon that is often ends up with a failure to achieve the full genetic potential. Stress may be from any origin and can even be a disease itself. There exists a variety of endocrine regulatory points of stress which limits the efficiency of production and reproduction. A simple transport produces an immediate constant increase in arginine, vasopressin and corticotrophinreleasing hormone secretion in animals. However, adenocorticotrophic hormone reaches a maximum in the first hour, while cortisol is highest during the second hour. Contrastingly, the hypothalamo–pituitary–adrenal response is delayed occurring only after glucose decreases below a threshold in an insulin treated animal. Negative feedback effects appear to operate mainly at the pituitary level during transport but at the hypothalamus during hypoglycaemia.

To sustain the meat industry in profitable manner, efficient utilization of meat by-products is an important issue. In today’s competitive world the realization of old saying “Only the last cry of the animal is wasted” has become essential. The utilization of by-products not only ensures additional revenue but also reduce the cost of various mandatory disposal treatments. The live animals are becoming costlier over the dressed carcass which compels the utilization of by-products. Moreover, unused by-products is also a great threat to environment and public-health apart from loosing nutritional resources. According to FAO (2004) estimates 106.75 million livestock and more than 650 million poultry birds were slaughtered annually in India leading to production of 6.3 million MT meat and different by-products of appreciable value. Now a day’s various techniques are available for the utilization of by-products for different purposes still significant portion of the by-products are unutilized and poses huge economic losses.

Animal By-products are the portions of animal body which are not included in dressed carcass. Animal by-products can be estimated by subtracting the dressing percentage from 100. Dressing percentage is inversely proportional to the byproducts means lower the dressing percentage, higher will be the yield of by-products and vice versa. In normal cases dressing percentage usually ranges between 50-70 percent and by-products yield in between 30-50 percent. However, the actual percentage may be higher because it excludes the weight of bones in muscles which is a part of dressed carcass.

Introduction

Use of acid/base is common in laboratories for experiments like titration and proper safety in their handling laboratory is necessary. In this chapter we will briefly discuss about the safety measures necessary to be adopted while using acids/bases in laboratory for any experiment.

Handling of Strong Acid/Base

There are four major points that need to be taken care of while working with strong acids or bases that might be quite harmful if any accident happens.

1. Protect Yourself

Wear a lab-coat and acid-resistant gloves: Always use lab-coat/apron and make it sure that the sleeves properly cover your arms. More importantly, use gloves made of acid-resistant materials and also wear shoes to protect your feet while wearing long-pants/jeans. Female with long hair, must tie her hair properly (with rubber band) to avoid any disturbance caused by appearance in between.

Wear safety goggles: It is important to wear safety goggles to protect your eyes using larger and fitting goggles that cover front as well as sides of your eyes. Always use properly fitting and adjustable goggles because smaller/ loose goggles may not protect the areas around your eyes against accidental acid spills and it may fall down from your face, if it is too loose.

Locate emergency wash area: There must be an emergency washing area nearby the work place or laboratory containing lab spill management kits. All the workers in the laboratory must be aware of using the kits and emergency plans.

Neutralize acid: Don’t panic even if an acid or chemical spill happens. Stay calm and act as quickly as possible. In case an acid spills, neutralize it by using sodium bicarbonate so that they can be cleaned and disposed safely. If acid comes in contact of skin, wash it off under running tap water but do not use/ apply sodium bicarbonate on skin.

Introduction

For proper and efficient experiment to be conducted, experimenters need so many chemicals to deal with. This includes different acids, base, salt, different kind of indicators and so on. Some of these chemicals are safe for health, but some of them are dangerous to health when come in close proximity to our body while some of the chemicals cause health issues on inhaling. These may cause improper functioning of some of our physiological activities. Acids and bases are very dangerous for our tissues when come in our contact. These may cause serious respiratory problem in addition to injuries on coming to our contact. Some chemicals are exploratory yet they may cause even death of the person working with them in laboratory. Therefore, mere use of the chemicals in laboratory is not only the objective of the experimenter. The person working in laboratory should also be concerned about the proper use and handing of the chemical while working with it. Thus, every researcher of an institution who has to work with chemicals in a laboratory should be made aware about the chemicals to be used in the laboratory and the consequences if any mishandling of a laboratory chemical occurs. Not only these, suitable precautionary measures should also be known to the researcher along with ensuring the availability of the required safety equipment/installations. Hence, a proper understanding of the ways of handling of chemicals in a laboratory is of prime importance for the personals like you who are working or have to work in laboratory.

Safe Handling of Chemicals in Laboratory

Safe use/handling of chemicals in laboratory include minimized exposure to chemicals, maintaining safety data sheets, proper labelling, storage, segregation, and transport of chemicals for personal hygiene.

Introduction

We come across a variety of chemicals every day in a laboratory. While some of them are relatively safer, others are extremely hazardous. Thus, it is very important to know the potential hazards that can be caused by the chemicals present in the laboratory and the safety measures needed to be followed to avoid the hazards. Additionally, we should also be aware of the steps necessary to be taken on such hazardous situations. According to IUPAC, a hazardous chemical mean the chemical which has the potential to cause damage in various ways. In a laboratory, there are chemicals that might be irritant, carcinogen, respiratory fibrogen, systemic poison, asphyxiant, flammable, etc. which have the potential to cause hazard to the workers or environment. Therefore, it is important to use appropriate procedure to reduce the risk and protect the health/safety of laboratory personnel, the public and the environment.

Types of Hazards Associated with Chemicals

Chemical hazards: The hazards caused by chemicals can be broadly classified into three categories.

1. Health hazard: This is also known as toxic effects of chemical. The risk associated with a chemical in laboratory depends on the extent of exposure and the inherent toxicity of the chemical. Many chemical reactions form the product that might be much more toxic than the reacting chemicals. For example, inadvertent mixing of formaldehyde (a common tissue fixative) and hydrogen chloride results in the generation of bis(chloromethyl) ether, a potent human carcinogen. For most of the chemicals, the route of exposure (through skin, eyes, gastrointestinal tract, or respiratory tract) is more important (Figure 17.1) that must be considered during risk assessment.

10.1 Introduction

The primary purpose of egg packaging is to keep the egg safe from damage, such as cracking, while in transit. By limiting gas exchange via the shell and shell membrane, the egg package may help safeguard the egg’s internal quality. Once an egg has been deposited, it is immediately exposed to the conditions of the henhouse. In this environment, it is exposed to many different microorganisms. Almost often, there are no negative effects on health. However, there are microbes that can ruin eggs and others that can cause food poisoning. Salmonella bacteria are found in the digestive tract of all animals and can contaminate the poultry houses.

Introduction
Antimicrobial resistance (AMR) constitutes a profound global health crisis, jeopardizing the efficacy of antibiotics and posing a severe threat to the foundation of modern medical practice. The rise of multidrug-resistant (MDR) pathogens, which exhibit resistance to multiple classes of antibiotics, has significantly escalated the global burden of infectious diseases, complicating treatment protocols and increasing morbidity and mortality rates. According to the World Health Organization (WHO), AMR could lead to 10 million deaths annually by 2050 if current trends continue, accompanied by economic losses projected to reach trillions of dollars due to prolonged hospitalizations, increased healthcare costs, and reduced productivity. The traditional antibiotic development pipeline has stagnated, hampered by scientific complexities, high financial costs, and stringent regulatory frameworks, resulting in a critical shortage of novel antimicrobial agents. This necessitates the exploration of innovative strategies to combat AMR and preserve the utility of existing antibiotics. Among these strategies, Crispr-Cas (Clustered Regularly Interspaced Short Palindromic Repeats and Crispr-associated proteins) systems have emerged as a groundbreaking gene-editing platform with transformative potential for addressing AMR. Initially identified as a bacterial adaptive immune mechanism, Crispr-Cas has been repurposed to enable precise targeting of genetic elements, offering novel therapeutic, diagnostic, and environmental solutions. This chapter provides a comprehensive analysis of Crispr-Cas systems in the context of AMR, exploring their molecular mechanisms, diverse applications, current limitations, and future prospects across clinical, agricultural, and environmental domains. By leveraging the precision and programmability of Crispr-Cas, researchers aim to develop targeted interventions that mitigate the spread of resistance while minimizing collateral damage to beneficial microbial communities.

Historically, humans have utilized animal skins for various purposes including shelter, clothing, weapons, and food containers. In contemporary times, skins and hides significantly contribute to foreign exchange earnings within the animal husbandry sector and are widely employed by the leather industry. At slaughterhouses, hides and skins are generally collected and dispatched to tanneries on the same day. If a tannery is not in close proximity, hides are preserved through salting or curing prior to being transported in batches.
A skin (the outer covering) from a fully grown large animal is termed a hide; it is comparatively large, thick, and heavy, typically exceeding 30 lb (13.62 kg) for cattle or buffalo. Conversely, the outer covering of smaller animals such as sheep, goats, pigs, and young calves is known as skin. This type is smaller, thinner, and lighter. The term “slunk” refers to the skin of an unborn calf, which is often utilized for parchment, light suede, or drum skins. Calf skin is derived from young calves that have not yet reached maturity, and it is generally softer and more delicate than the hides of older animals. Its fine texture renders it highly sought after for premium leather goods. In contrast, kip skin is obtained from older but still immature calves. It is thicker and more robust than calf skin while being more refined than adult hides. Kip skin is recognized for its blend of durability and softness, making it ideal for longlasting leather products.
Hides and skins constitute approximately 4-11% of an animal’s live weight, influenced by factors such as species, age, breed, and health. In cattle, the average hide yield is about 7% of live weight, whereas in sheep and goats, the average skin yield is around 11% of live weight. Hides and skins rank among the most valuable by-products of animals and are transformed into leather through the tanning process. The trimmings are repurposed for the production of glue, artifacts, or as feed supplements.

There are specific hazards associated with equipment, operation or a particular section. Such possible hazards and their preventive measures are discussed below.
I. Milk Reception Dock
    1.    Where the top of a vat, into which a 40 litre can of milk is to be dumped, is higher than the milk can, two men should lift and empty the can.
    2.    Where steam jet method of can washing is used, to avoid burning, employees would be furnished with protective equipment, including rubber boots and long aprons
    3.    Cans should be stacked in areas away from frequently used passage ways
    4.    Cans should not be stacked so high that they may fall and injure someone

Food packaging serves to protect products throughout their journey from production to consumption. However, packaging is often exposed to a variety of hazards during transportation and storage that can compromise its effectiveness and, ultimately, the quality and safety of the food inside. Understanding these hazards is essential for designing packaging solutions that can withstand the physical, environmental, and atmospheric challenges encountered along the supply chain. This chapter examines the types of hazards that affect food packaging during transportation and storage, focusing on the ways in which these factors impact packaging integrity, food quality, and consumer safety. By exploring mechanical hazards, environmental influences, and atmospheric interactions, this chapter provides insights into the crucial role that resilient packaging plays in safeguarding food from production to point-of-sale.

Herd management practices in the handling, nutrition, milking techniques, sanitation, and housing of dairy animals play key roles in predisposing the individual animal as well as herds to diseases. The key factor influencing the reduction of health issues are the decisions made by herd managers or animal owners.In order to maximize output and profitability through disease control, herd management approaches in conjunction with a veterinarian programme can be most beneficial.

Heat desiccated products represent khoa and khoa-based sweets, rabri, basundi, etc. These are important traditional dairy products. Traditional dairy products and a great assortment of sweets is an integral part of Indian heritage. These products are endowed with enormous value and enjoy tremendous mass appeal. Of great social, religious, cultural and economic importance these products have been developed over a long period of culinary skills and carry with them, the age-old wisdom and experience. Traditional dairy products have always played a pivotal role in preservation of precious milk nutrients and promotion of its consumption among masses. The increased availability of milk during the flush season coupled with lack of facilities to keep liquid milk fresh during transit from rural production areas to urban market has led to the conversion of milk into variety of traditional products. In addition to preservation of milk solids for longer duration, manufacture of traditional dairy products adds value to milk and also provides tremendous employment opportunity. It is estimated that about 50% of milk produced in India is converted into a variety of traditional products.

Traditional dairy products represent the most prolific segment of Indian dairy industry. These products not only have an established market in India but also have a great export potential because of strong presence of Indian diaspora in many parts of the world. In view of the growing awareness towards the safety aspects of milk-based sweets in India, the consumer shall prefer to buy these products from the organized sector. Despite the widespread popularity and acceptability of traditional milk products in the Indian market, the organized sector has so far not been able to tap into this market potential for many reasons such as lack of published literature on their technology, inadequacy of appropriate technologies for their commercial exploitation, inadequacy of appropriate packaging materials and labeling to take care of new pattern in consumer demand, low keeping quality and a lack of quality assurance systems.

Abstract

The objective of this chapter is to provide an overview of heat pump dryer (HPD) and recent developments in its applications for drying of agricultural and food products. The basics of heat pump dryer, classification, operating principle, configuration and control system have been presented for better understanding. Many researchers have concluded that HPDs use energy more efficiently than electrical dryers. The heat pump dryer is best suited for drying high value commodities such as fruits, vegetables, spices, condiments, herbs, medicinal and aromatic plants at near ambient temperature for producing better quality dehydrated product.