eChapters

Sheep and goat rearing in India continues to be traditional even today. This sector is primarily in the hands of poor, landless or small and marginal farmers who raise their animals on natural vegetation, stubbles and supplement tree lopping. The productivity of sheep in India is relatively low with an average body weight gain of 20 to 50 g/day. The major causes for the low productivity are inadequate grazing resources, tropical heat and disease incidences and a lack of awareness about improved management practices.

Long used as beasts of burden, animals in India are still regarded today as little more than commodities rather than sentient beings who feel pain, stress, exhaustion and depression. Low literacy rates and the tendency to follow traditional practices and cultural traditions have left India surely lacking in the area of animal welfare. India holds the majority of the world’s working animal population. Animals that are forced to work in India include bullocks, horses, ponies, mules, donkeys, camels, elephants and dogs. Despite a proud heritage and a culture rooted in tolerance and compassion, animal welfare is largely ignored by Indian society, leading to extreme animal suffering. Our villages and to a great extent, the urban population still allow working animals to be mercilessly exploited in fields, on the streets, in brick kilns, on battlefields, on playgrounds and in timber areas – all in the name of agriculture, entertainment, security and any number of other “justified” pursuits.

India is known for its rich wildlife heritage. In fact, the country is considered one of the best among available mega-biodiversity areas in the world. The landscape and agro-climatic conditions of India make it a unique habitat for wild animals. The government of India has made attempts to conserve wildlife through different projects like Corbett tiger, Elephant projects etc. The wild life management in India is at present ‘preservation-oriented’. This is bound to remain so for a long time because of the significantly depleted status of our wild life population. Indian government in pursuit of conserving the heritage of wilderness has made committed efforts with several wildlife and Forest Acts to ensure protection by declaring the areas as protected under the spectrum of national park and wildlife sanctuaries. The eco-tourism and conservation awareness has created environmental consciousness among the people.

Introduction

Proteins are the most abundant organic compounds constituting major part of the body. Chemically, proteins are nitrogen containing macromolecules and polymers of L α-amino acids, which serve a wide range of structural and biological functions in animal body. For example, connective tissue made up of collagen, metabolicenzymes, neuro transmitters,signal in gmolecules, structural components of cell membranes and cell organelles, etc. all are chemically proteins.

Before goinginto the details of protein metabolism, first, we need to understand that there are majorly two sources of proteins in our body: dietary protein and body protein. Dietary protein is taken in diet, while body protein indicates the protein and amino acids synthesized in animal body to fulfill the requirements for growth and development. The digestion of proteins will not be discussed here as it has been described in detail in chapter 12. Dietary protein is digested in presence of several enzymes such as trypsin, pepsin, chymotrypsin, aminopeptidases and carboxypeptidases and is converted into mono-, di- and oligopeptides in stomach and small intestine; and finally converted into amino acids. These amino acids are transported to the systemthrough intestinal mucosa via active transport, from where they enter into the cells for further metabolism. Therefore, ‘metabolismof proteins’ is more appropriatelylearnt as ‘metabolism of amino acids’.

Introduction

All the amino acids have in common an amino group and a carboxyl group attached to the -carbon atom; however, they differ in having distinctive side chains, usually called R groups, as is shown in the following  generalised structural formula

Proteins are composed of amino acids and are large molecules that play a crucial role in various biological processes. They are considered the fundamental building blocks of life due to their abundance in the body, constituting approximately 60% of the dry weight of cells. These complex biomolecules are intricately folded and twisted strands of amino acids, actively participating in vital life processes, including metabolism, locomotion, immune response intercellular signaling, and molecular identification. As macronutrients proteins are present in all living organisms and directly contribute to numerous metabolic pathways. It is important to note that proteins are unique to each organism, exhibit species specificity, and vary within different organs of the same organism. With 22 different amino acids, the properties of a protein molecule are determined by the specific arrangement of these amino acids. While plants can synthesize all the necessary amino acids for protein production, animals rely on external sources for certain amino acids. Proteins consist of amino acids connected through peptide bonds, formed by the linkage between the amino (NH2 ) group of one amino acid and the carboxyl (COOH) group of another amino acid.

Introduction

Aquatic ecosystems are critical components of the global environment and provide a variety of resources for human population, including food, water for drinking and irrigation, recreational opportunities, and habitat for economically important fisheries. Fish is the main source of animal protein for 3 billion people worldwide, providing a valuable protein complement to the food platter worldwide. Fish is also an important source of essential vitamins and fatty acids. Furthermore, it provides an important source of cash income for many poor households and holds a great potential as a source of foreign exchange. However, aquatic ecosystems are increasingly being threatened directly and indirectly by climate change. Global warming with consequent climate variability and extreme weather conditions has a great impact on the aquatic ecosystems resulting in increased temperature variation, ocean acidification and freshwater salinization etc. As per report of IPCC 2018, global warming of 1.5 ºC above pre-industrial levels has been declared (IPCC, 2018) and expected to rise further in future. Thus, variations in temperature, salinity, acidity and dissolved oxygen along with the effects of other anthropogenic activities may exert strong in?uences on aquatic ecosystems and the aquatic animls will be facing these climate-related stressors in near future. Such environmental stressors is projected to alter fundamental ecological processes, geographic distribution of aquatic species, reproductive and immunological performance of species etc.

Traditionally, Labour Laws have a protective function consisting of established standards both to protect workers in their workplace and to provide them a basic minimum level of living conditions. Alongwith this function, there also existed in most systems, a legal framework for the regulation of industrial relations between employers and workers. These functions had their impact on problems of development. The emphasis was more on labour legislation for its own sake, development being a separate proposition. This mutual lack of concern was perhaps due to historical factors. The most important aspect is the fact that in developed countries of the Western world, labour legislation followed the emergence of industrialization and in response to a demand for economic and social betterment of the workers, whereas in developing countries the emergence of labour laws preceded industrial growth.

General Views about Weende’s System of Analysis

A team of scientists under the leardship of Henneberg and Stohmann of (University of Göttingen, Germany) developed proximate principles analysis system in the sixties of last century at Weende’s Experimental Station (Germany), located at the University of Göttingen. Main components of different fractions in the proximate analysis of foods are moisture, ash, crude protein, ether extract, crude fiber, and nitrogen-free-extract. These workers emphasized that carbohydrates could be grouped into: (1) the starches and the sugars, and (2) coarse fibrous fractions. Later on an insoluble residue after boiling the fat free food sample first with dilute acid and then with dilute alkali was obtained based on the acid stomach digestion and the subsequent alkaline intestinal digestion of consumed food. At the end of digestion insoluble organic residue was denoted as crude fiber.

Introduction
Antimicrobial resistance (AMR) has emerged as one of the most pressing global health threats, with implications that extend beyond human medicine to animal health, food security, and the environment. In livestock production systems, the misuse and overuse of antibiotics contribute significantly to the development of resistant pathogens. These resistant organisms can spread from animals to humans through direct contact, contaminated food products, and environmental pathways. The containment of AMR in livestock is not solely a technical or regulatory challenge—it is also a social and behavioral issue. Public awareness, education, and behavioural change are key pillars of any effective AMR mitigation strategy. Schools, community networks, and media platforms play vital roles in shaping knowledge, attitudes, and practices related to antibiotic use in livestock.
Causes of AMR in Livestock
Over-prescription and misuse of antibiotics in veterinary care Use of antimicrobials as growth promoters rather than for therapeutic purposes Poor farm bio-security and hygiene leading to frequent infections
Inadequate regulation and over-the-counter sale of antibiotics without veterinary oversight
Public Health Impact
Transmission of resistant pathogens via the food chain Contamination of soil and water with resistant genes through manure
Emergence of zoonotic diseases with limited treatment options

Abstract

Pulse combustors provide an advantageous superposition of unsteady gas flow and high intensity sound waves. Such a combination does not only accelerate drying rates because of increased heat and mass transfer but also allows processing of liquids, pastes and agglomerated solids in a dispersed state due to aerodynamic impact from the high intensity sound wave. Over last decades, applications of pulse combustion in drying have been exploited continuously and different pulse combustion dryers have been designed and fabricated. In pilot tests and technical reports on these dryers, short drying time, high energy efficiency and product quality are generally reported, which cause that pulse combustion drying is regarded as a technology of the future in convective drying.

This chapter attempt to introduce basic knowledge and state-of the art about this emerging technology and summarizes some recent studies in pulse combustion drying and equipment design. Following a concise description of pulse combustion and pulse combustor, the basic types of pulse-combustion dryers are presented, including spray dryers, fluidized bed dryers, impinging dryers, and dryers of special design. The existing commercial applications and pilot test projects are described and potential applications are identified.

Wool is a natural fiber that possesses numerous outstanding characteristics, rendering it both functional and visually appealing. Nevertheless, not all wool is created equal; there exists considerable variation in the quality found in the marketplace. This explains the significant fluctuations in price, as some wool is of superior quality and therefore commands a higher price. Various factors influence the quality of this fiber and, consequently, its value. Below is a list of some of these factors.
a) The diameter of the wool fiber is the most critical factor affecting its quality and price. Generally, merino wool is regarded as the highest quality due to its fine texture, which produces an exceptionally soft fiber. In simple terms, the finer the wool, the greater its worth.
b) Consistency in fiber diameter is another vital aspect; the more uniform the fiber, the higher its value.
c) The colour of wool also plays a significant role in determining its value. Wool that is white or off-white can accommodate a wider array of dyes used in fabric manufacturing.
d) Staple strength is a measure of the fiber’s capacity to endure the production process. A higher staple strength results in less waste during manufacturing. Wool is a valuable by-product of sheep, differentiated from hair by its enhanced elasticity, flexibility, and curliness. The quality of wool is affected by factors such as shrinking, strengthening, and felting conditions. In their natural form, wool fibers are coated with wool grease (sweat) and wool soap or yolk (suint), which are secreted by specialized glands to preserve the wool’s condition. Wool is classified into three primary types of fibers:

Hazard Analysis and Critical Control Points (HACCP)

Hazard Analysis and Critical Control Point is a comprehensive food safety system of food which starts from production to the ultimate consumption. HACCP monitors each and every step of production process, identify the specific hazards, implement the effective control programme and also verify the procedure. However, it is not a zero risk programme and there is possibility of risk of hazards in the process but the theme of programme is to minimize the risk of hazards upto a level which will be considered as safe. Thus HACCP programme is termed as risk management tool. It involves the management of all types of hazards like microbiological, chemical and physical.

1. Introduction:- Overview of Good Laboratory Practices (GLP)
1.1 Definition and Scope of GLP
GLP refers to a set of standards that govern the organizational processes, personnel responsibilities, and conditions under which laboratory studies are conducted. It aims to regulate research environments and ensure the generation of high-quality, traceable, and reproducible results. The scope of GLP encompasses a wide range of scientific fields including pharmaceuticals, agrochemicals, veterinary products, and environmental safety assessments. Good Laboratory Practices (GLP) regulations were developed by the Organization for Economic Co-operation and Development (OECD) and well adopted by regulatory agencies world-wide. The primary objective of GLP is to promote high standards of accuracy and integrity in non-clinical research to protect human health and the environment.
1.2 Principles of GLP
The fundamental principles of GLP include:
• Study Planning and Protocol Development: Every study must have a clear plan and defined objectives, which should be outlined in a comprehensive protocol.
• Personnel Responsibilities: The roles of study directors, scientists, quality assurance personnel, and support staff are clearly defined.
• Test Systems and Facilities: Laboratories must maintain appropriate facilities and control systems for conducting studies. These include properly calibrated equipment, controlled environments, and standardized procedures.
• Data Integrity and Reporting: Data must be meticulously recorded, verified, and archived, ensuring it is traceable and reproducible.
• Study Documentation and Archiving: All records, raw data, and reports must be stored and accessible for a period defined by regulations, ensuring transparency and reproducibility.

We all are familiar with the word “quality”. If we bring some fruits or vegetables from the market, the other family members will reflect on their quality by making observations such as: fresh or stale, good or bad quality or inferior product, etc. These observations are perceptions of consumers based on the sensory attributes of the fruit or vegetable colour, appearance, touch, smell or taste.

The quality characteristics of food that are acceptable to consumers are comprehended under the term “Food Quality. It includes external factors such as appearance (size, shape, colour, gloss, and consistency); internal factors (chemical, physical, microbiological) and characteristics/ specifications prescribed under the Government laws/standards. If consumer’s perceptions regarding quality of food are not positive he or she either will not purchase the material or will be paying less compared to when the consumer has positive perception about the quality.

The relationship between quality, profitability and market share has been well established. In the quest of quality, the dairy business is passing through revolutionary changes and the need for such changes has been very well realized. The leaders have initiated the process of setting vision and are working hard to provide the basic infrastructure with necessary resources. This has become a point of vital importance as the nation has now captured the first rank in milk production globally and is now ready and set to march ahead in the global race for dairy products market. Our country has great potential to export the dairy products such as cheese particularly Mozzarella, Feta, and indigenous products such as ghee, khoa, chhana, paneer, and array of sweets. Food items or dairy products to be traded in the international markets should be manufactured in accordance with global accepted norms and standards. In order to improve the quality of milk and milk products the Government of India is focusing on “Clean Milk Production”. As a dairy technologists and entrepreneurs, we must ensure production of quality products.

Adulteration in animal and human foods has become common feature in the country, therefore we should be cautious while selecting animal/human feed ingredients.

The author of this compendium has developed. “Animal Feed Testing Kit” based on novel cud liquor enzyme complex (innovation certified by ISA, International Search Authority - Patent office, Vienna), registered with WIPO (Geneva). This method is described in detail in this chapter and Patent application is field at Indian Patent Office Delhi.

Now-a-days, animal feed is being adulterated with extraneous materials viz, Saw dust, Ric hulls, sand and Silica, Castor husk, oat hulls and urea (higher than 01 percent limit on dry matter basis).

The quality of medicinal plants is paramount in respect of its therapeutic value. The therapeutic value of a plant solely depends on its genuineness in respect of its identity and optimum quantity of therapeutically active phyto-constituents. The medicinal plants are resourced from wild and cultivated sources. The major sources of medicinal plants are wild sources viz. forest areas, open land, non-cultivated sources etc. The medicinal plants collected from wild sources remain questionable for their quality especially when they have been procured from trade channels owing to fair chances of adulteration, substitution and inappropriate storage condition which lead to deterioration in quality. All the medicinal plants which are available in dried form in the trade are termed as crude drugs and are always subject to quality check in a laboratory on the basis of pharmacognostical, physico-chemical, phyto-chemical, microbiological and other analytical specifications. These specifications are available in pharmacopoeial monographs under regulatory frame work.  The pharmacopoeial standards are experimentally established and are also approved standards incorporated in a pharmacopoeia. A pharmacopoeia is a book of standards applicable to drug substance and their dosage forms of common usage in a country. Pharmacopoeia is prepared by recognized authority appointed by the Government of a particular country. It is an essential requirement of a regulatory framework in the sphere of Drugs and Cosmetics Act 1940 and Rules there under (Anonymous 1940). Pharmacopoeial standards are experimentally established and approved standards.

This chapter introduces a comprehensive self-assessment resource covering the major concepts presented throughout the book. It includes multiple-choice questions, fill-in-the-blanks, true/false questions, short-answer questions, essay questions, viva questions, numerical problems and questions on emerging technologies. The question bank is designed for university examinations and competitive examinations such as ARS and ICAR-NET. It supports systematic revision of wool biology, properties, testing, processing, marketing, standards and modern technologies.

Ionization Chambers for Gases

Generally these type of instruments are known as dose-rate meter (e.g., the so called “cutie-pie”). Radiation intensity (i.e., a constant stream of particles or photons) gives rise to a continuous series of pulses, and if these are allowed to merge, they form a weak electric current, which may be amplified and registered by an electronic circuit. The final scale reading will then be a measure of the energy dissipated in the following chamber per unit of time by the ionizing particles or photons. In gas-flow counters, the radioactive samples are placed inside the detector which will be transfused by a gas at atmospheric pressure. This instrument counts particles of low energy, such as the b particles from 14C, effectively (Window-less counting).

Radiofrequency (RF) pasteurization is an emerging thermal processing technology that uses electromagnetic energy to generate rapid and volumetric heating within food materials. This chapter introduces the principles underlying RF heating and explains how alternating electric fields interact with polar molecules and ions to produce heat. It examines RF system configuration, electrode arrangements, packaging considerations and the operational workflow from raw-material preparation to post-treatment cooling and quality evaluation. Particular attention is given to microbial inactivation, enzyme control, uniform heating, nutrient and bioactive-compound retention, colour and structural preservation. The chapter also discusses technical limitations, hotspot formation, packaging challenges, nutritional considerations and current industrial constraints associated with RF processing.