eChapters

This chapter introduces harvesting as the first major stage at which fleece quality can be preserved or lost. It discusses shearing methods, timing, hand and machine shearing and appropriate animal handling. Post-shearing operations including skirting, rolling, classing, pressing, baling, storage and transportation are examined. Particular emphasis is placed on contamination control, especially prevention of dark fibres and synthetic materials. Indian shearing practices and opportunities for improved training, hygiene and automated systems are also discussed.

This chapter introduces the natural, acquired and processing contaminants found in greasy wool and examines defects that reduce fibre value. Wool grease and suint, dirt, dust, sand, vegetable matter, branding materials and synthetic contaminants are considered. The chapter discusses kemp, medullated fibres, pigmented fibres, tender wool and other defects and explains their effects on processing and end use. Clean wool yield is introduced as an important quantitative measure for determining the amount of usable fibre recovered from greasy wool.

This chapter introduces the complete processing sequence through which greasy wool is transformed into yarn and fabric. It covers sorting, scouring, drying, carbonising, carding, combing, drawing, spinning, weaving, knitting, dyeing and finishing. The distinction between woollen and worsted processing systems is explained in relation to fibre length and alignment. The chapter also addresses effluent management, grease recovery, energy use, chemical consumption and cleaner processing technologies, emphasizing the connection between processing efficiency and environmental sustainability.

Shearing is an operation of clipping the wool from sheep body. It is essential to get the wool from animals as well as to provide comfort to the sheep and enhance the economic status of sheep farm. The time of shearing is twice in a year preferably once at beginning of summer (march-April) and second at the start of winter (September – October). However, for veterinary reasons and other requirements of animals, shearing can be performed any time.

This chapter introduces objective wool testing and the instruments used to generate reproducible measurements of fibre quality. It examines sampling and conditioning procedures and methods for measuring fibre diameter, staple length, staple strength, yield, vegetable matter and colour. Projection microscopy, airflow measurement and automated optical analysers are compared. The chapter explains how objective testing supports certification, sale by description, quality assurance and fair marketing and highlights the importance of standardized methods and representative samples.

This chapter introduces the major animal-derived textile fibres and distinguishes wool from fur, pelts and specialty fibres. It examines the structure of mammalian fur coats and the characteristics of fibres such as cashmere, mohair, angora and pashmina. The chapter discusses fibre fineness, scale structure, medullation, source animals and end uses. It also highlights the premium value of specialty animal fibres and their importance in luxury textile markets, particularly India's pashmina sector.

Man have used different animals like cattle, buffaloes, horses, donkeys, mules, yak, camel and elephants for different kinds of work. Draft animals evolved during course of time have advantages of stability, sustainability and environmental friendliness. Different animals have different draught capacities for performing different types of work. The approximate power developed by various animals in terms of horse power are- Horse-1.0: Bullock-0.74: Buffalo-0.75: Cow-0.45: Maule-0.75: Donkey- 0.35. Draught developed by the animal is generally proportional to its body weight. Draught ability: Work is done when force is exerted to move an object over a distance. Work in the strict sense of “Force exerted x distance through which the force is moved”. Work performed by animals can be measured by quantifying their capacity to generate power. Draught Power (W) = Draught (N) x Speed (m/s) Management of different working animals 1. Cattle and Buffalo Bullocks: they are used for various operations like ploughing, harrowing, threshing, harvesting, for lifting water and for transporting people and agricultural produce.  The average speed of a pair of bullocks pulling a cart is around 4-5 km per hour. If not overdriven, they can travel 25-30 km or even 40 km in favorable condition. Atmospheric 

Apart from the job content and specialization, the conditions or the atmosphere in which employees work is critical to their productivity. Work environment includes the tools and equipment provided to perform the job, the atmosphere at the work place, worker motivation etc.

Tools and Equipments

The quality of tools and equipment provided to a worker has a profound effect on the worker’s contribution to his job. A poorly designed tool can cause excessive physical burden on the worker and may result in fatigue. A faulty computer monitor can cause severe eyestrain, which might affect productivity in an office environment. Hence, tools and equipment should be appropriate for the production task. The design should consider ergonomic factors like grasping pressure, size, weight, ease of use etc. when designed properly, tools enable users to work efficiently, resulting in higher productivity. The equipment installed should be able to meet the capacity requirements of the job, have safety features and be easy to use. The use of the right tools and equipment can improve productivity in an organization substantially.

Pollution emanating from industrial units has become a major problem globally and it is generally monitored by some government agencies. These agencies enforce various laws and regularly carry out checks at the industrial units. Same is true with regards to slaughterhouses or abattoirs. Pollution parameters are parameters against which the effluents coming out of the Effluent Treatment Plant (ETP) of slaughterhouse or any industrial entity is measured against. Effluent generated during various processes of the slaughterhouse is directed towards the ETP and it undergoes different processes to reduce the pollutants level in the effluent. Then, the effluent is tested against the pollution parameters and the effluent must have less than the maximum permissible level of the pollution parameters. The effluent must not have more than the permissible maximum level of the pollutants after coming out of ETP before being discharged into the municipal sewage system or some natural water bodies.
 Pollution parameters are
1. Biochemical oxygen demand (BOD)
2. Chemical oxygen demand (COD)
3. Chloride (Cl)
4. Dry matter (DM) or total solids (TS)
5. Grease, fat and oil
6. pH
7. Total nitrogen (N)
8. Pathogenic bacteria

Yeasts

Yeasts are non filamentous, unicellular fungi that are typically spherical or oval. Like molds, yeasts are widely distributed in nature; they are frequently found as a white powdery coating on fruits and leaves.