eChapters

Introduction

Thar Desert is unique both from floristic and climatic parameters. Biodiversity in this region survives on a very/ fragile ecosysytem under a highly hostile environment. Major area consists of dry undulating mass of loose sand, thus, leading to shifting sand dunes. The sandy plain is full of sand-hills with serve as low depressions where salt and soda are deposited after drying. The whole area is inhospitable and sterile. Trees are rather a few and far between (Bhandari, 2005).

The Thar Desert of western India is known for its rich and ancient culture system and traditions. The communities have long been part of the Thar Desert ecosystem and have evolved specific strategies to live in harmony with its hostile environment. Orans have remained mainstay in balancing this arid ecosystem. Man of this region has never been greedy as he is today. Orans were repositories of ancient system of gene pool conservation. But, there are unregulated encroachment on the marginal lands and over-exploitation of groundwater resources. Orans has been part and parcel of the lifestyle of the Thar Desert inhabitants. Orans are used to provide vital grazing land for livestock, water, minor forest produce, medicinal plants and green cover for the villages. They were worshipped as devbhumi. Orans preserve the endemic, endangered or threatened species, medicinal plants and wild variety of cultivars found.

Abstract

The Western Desert covers approximately 700,000 km², which is more than two-thirds of the total area of Egypt. This immense desert, to the west of the Nile, spans the area from the Mediterranean Sea to the Sudanese border. The Great Sand Sea lies within the desert’s plain and extends from Siwa Oasis to Jilf al Kabir plateau. Scarps and deep depressions exist in several parts of the Western Desert. Limited agricultural production, the presence of some natural resources, and permanent settlements are found in the western desert oases (Siwa, Bahariya, Farafra, Dakhla and Kharga), all of which have fresh groundwater. Siwa Oasis, close to the Libyan border, is isolated from the rest of Egypt but has sustained life since ancient times. The Siwa’s cliff-hung Temple of Amun was renowned for its oracles for more than 1,000 years. Herodotus and Alexander the Great visited the temple in the pre-Christian era. The Oasis is a natural depression about 23 meters below sea level. It covers an area of about 1050 km² (2,50,000 acres); of which only 87.95 km² (20,940 acres) are currently cultivated. The total numbers of inhabitants in Siwa were 21,482 in 2006. The main activity in Siwa oasis is agriculture which depends on the groundwater that outflows from about 1199 wells and springs giving a total annual discharge of about 255 million cubic meters from which, about 222 million cubic meters are lost due to evaporation and evapotranspiration, while the remainder goes to the natural lakes of Siwa Oasis. This has led to a continuous rise in the water table level and soil salinity.

Present research paper on land degradation processes relates to the improper management of water and land resources in Siwa Oasis, Egypt.

3.1    Factors Contributing to Climate Change
    3.1.1    Natural Causes to Climate Change
    3.1.2    Human Causes to Climate Change
    
3.2    Climatic Trends
    3.2.1    Global level
    3.2.2    National level
    
3.3    Climate Projections
    3.3.1    Global level Projections on Future Changes in Climate
    3.3.2    Climate Projections at the National level
    3.3.3    Climate Projections at the Regional level
    3.3.4    Projections of Extremes in Rainfall and Temperature
    
3.4    Consequences of Climate Change on Droughts and Agriculture
    3.4.1    Impact of Climate Change on Agriculture in some States of India
    
References

Research methodology is a detailed plan of investigation and the blue print of procedure for carrying out the research. In this chapter, discussion on the methodology has been made to understand the concepts, methods and techniques, which are utilized to design the study, collect information, analyzing data and interpreting the findings for revelation of truth and formulation of theories. The entire chapter has been broken up under following sub-heads for easy understanding:

1. Locale of research
2. Sampling design
3. Pilot study
4. Variables and their measurements

Introduction

The “plant disease triangle” is a fundamental concept in plant pathology that illustrates the interaction between three essential components necessary for the development of a plant disease. Firstly, the host plant which refers to the plant species or cultivar that is susceptible to the pathogen. Host plants provide the necessary environment and resources for the pathogen to establish, grow, and reproduce. Secondly, the pathogen which is any organism (such as fungi, bacteria, viruses, nematodes, or other microorganisms) that can cause disease in plants. Pathogens can infect host plants through various means, including direct contact, airborne spores, soil-borne organisms, or vectors such as insects. And thirdly, the environment which encompasses all external factors that influence the interaction between the host plant and the pathogen. This includes abiotic factors such as temperature, humidity, soil moisture, light, and nutrient availability, as well as biotic factors such as the presence of other organisms (competitors, predators, symbionts) that may affect disease development.

The plant disease triangle illustrates that the occurrence of a disease requires the presence and interaction of all three components: a susceptible host, a virulent pathogen, and a conducive environment. If any of these components is missing or unfavourable, disease development may be inhibited or prevented. Any change in ecosystem can affect plant diseases, because plant disease is the result of interaction between a susceptible host, virulent pathogen and favourable environment. If any of the three factors are altered, the progress of any one disease can change. Although interactions among the three factors must be matched, weather is an important variable due to its dynamic behaviour.

Introduction

Disasters are the natural and man made extreme events which exceeds the tolerable magnitude of any event, where adjustment is difficult. These events are catastrophic and results in the loss of life and property on a huge scale. These abnormal events form the headlines to the newspapers and media a world and national level.

These processes are beneficial to the human beings because they form the earth and habitable planet for the evolution of life. However, these processes within a short time limit forms, hazardous and such activities adversely affect the human beings and human related activities on a very large scale.

Amongst the three important types of disasters viz. natural, anthropogenic and technological, the first and the foremost natural disaster mainly includes the geological atmospheric and other related natural types viz. floods, earthquakes, cyclones, tsunamis etc.

Air is one of the most important constituents of man’s environment. It is calculated that a roan breathes about 22,000 times a day inhaling about 16 kg of air by weight. Air is present everywhere and its entrance from one place to another cannot be checked. Clean and pure air is very essential for the health and survival of man.

The phenomenon we call tsunami is a series of large waves of extremely long wavelength and period usually generated by a violent, impulsive undersea disturbance or activity near the coast or in the ocean. A tsunami is a very long-wavelength wave of water that is generated by sudden displacement of the seafloor or disruption of any body of standing water.  Tsunami are sometimes called “seismic sea waves”, although, as we will see, they can be generated by mechanisms other than earthquakes.  Tsunami have also been called “tidal waves”, but this term should not be used because they are not in any way related to the tides of the Earth.  Because tsunami occur suddenly, often without warning, they are extremely dangerous to coastal communities.

1. Introduction
Bioremediation is a process that utilizes biological agents, such asmicroorganisms, to eliminate pollutants, making it a natural and efficientmethod for environmental cleanup. This approach is considered cost-effectiveas it transforms harmful pollutants into less toxic substances through microbialdegradation or detoxification. Currently, many developing nations areprioritizing industrial growth, urbanization, and the use of agrochemicals inagriculture, which has heightened the importance of bioremediation and drawnsignificant attention to this practice. As a sustainable solution, bioremediationoffers a way to restore healthier ecosystems by removing pollutants from theenvironment (Fig. 1).

8. Introduction

The idea of sustainable development stands on the concept of maintaining the best possible environment within the availability of minimal resources and for the convenience of the society. Now-a-day the term “sustainability” gained a lot of attention due to challenges and problems faced in tackling the current situation of global pollution. One of the vital areas of research needs to be addressed in concern with sustainable development is the new innovations to enhance sustainability (Silvestre and Silva, 2014). 

1. Introduction
The world’s ecosystem is facing significant challenges because of risingpopulations, more urbanization, and industrialization (Juwarkar et al.,2014). Significant environmental contamination has been caused by moderncivilizations, industrialization, population increase, intensive agriculturalpractices, human activities, and technological advancement (Lalevic et al.,2016).

1. Introduction
Oil spills are defined as the unintentional release of liquid petroleum hydrocarbons into the environment, predominantly impacting marine ecosystems. This form of pollution, often caused by human activities, can also occur onterrestrial landscapes. Spills typically result from the discharge of crude oilfrom sources such as tankers, offshore platforms, drilling rigs, and wells, aswell as from refined petroleum products like gasoline and diesel (Smith etal., 2019). While such incidents are primarily accidental, they may arise fromvarious circumstances, including inadequate storage or poor maintenance,leading tocontainerleaks. Historically, one of the earliest documented oil spillsoccurred in 1907 in Batum, a region then part of the Russian Empire (moderndayBatumi, Georgia). This incident, involving a collision between an oil-ladenship and another vessel in the Black Sea, marked the beginning of recorded oilspill events, though historical records from that time remain limited (Johnsonet al., 2021). The consequences of oil spills are profound, affecting both theenvironment and the economy. On the ocean’s surface, oil disrupts aquaticecosystems by blocking sunlight penetration and depleting dissolved oxygenlevels, which are vital for marine life. Crude oil compromises the insulating andwaterproofing properties of fur and feathers, leading to hypothermia and deathin oil-coated birds and marine mammals. Additionally, ingesting oil can causeseveretoxicity, while damage to habitats and reproductive systems often delaysthe long-term recovery of affected species. Coastal vegetation, particularly inecosystems such as saltwater marshes and mangroves, is also highly vulnerable

1. Introduction
It is the need of the hour that disposal of radioactive wastes be taken seriouslyand given appropriate attention. We house around one million gallons of liquidradioactive waste awaiting remediation at U.S. Department of Energy’s HanfordReservation alone (Parshley & McDermott, 2021). Not only the numbers are
but the increasing demand of nuclear energy paves the way forgeneration of even more radioactive waste in future. The conventional methodshave certain limitations. Ion-exchange resins have reported to bedegradedunder high radiation and chemical precipitation has proven to be ineffectivein treating low concentration of radionuclides found in groundwater, posingrisk for centuries (Zhang & Liu, 2020). Remediation methods including soil

Introduction 
Sustainable development is one of the most important concepts in a business organization. In order to satisfy all the needs of the present without compromising the ability of future generations to meet their own requirements, sustainable development is a comprehensive strategy to growth. In order to build a stable and equitable future, it incorporates social inclusion, economic progress, and environmental conservation. The “three pillars” or “three dimensions” of sustainability—economic, social, and environmental—are frequently used to frame the idea of sustainable development. The North East Indian state of Assam’s cultural and economical legacy has an intricate connection to the long and prosperous past of the Assam Silk Industry. From the very ancient times, the production of silk from silkworm and weaving into beautiful garments can be seen in this part of the region.Evidence indicates that the cultivation of silk and weaving were well established in the region by the first millennium BCE, incorporating thousands of years to the cultural heritage of silk weaving in Assam.The indigenous communities of Assam, particularly the Bodo-Kacharis, have been identified for spreading sericulture to the area. Assam produces three types of silk, namely Muga Silk which is also termed as Golden Muga, Pat Silk and Eri or Endi Silk. Also known as the “Golden Silk”, Muga Silk is unique only to Assam and hugely popular because of its natural sheen which increases with each wash. The silk is produced by a special silkworm Antheraea assamensiswhich is endemic to Assam. The town of Sualkuchi, in the Kamrup district of Assam, India, is home to the well-known traditional silk-weaving industry. Sualkuchi, dubbed the “Manchester of Assam,” is well-known for its superior silk goods, especially those crafted from Assamese-only Muga, Eri, and Pat silk(Ghosh, 2021; (Rajesh et al., 2020) The Assam Silk is considered as one of the finest in regional, national and international market because of its superior quality, bright colors and attractive designs. It has a good amount of potential to boost the economic development of Assam. Despite having such importance, it has been observed that the silk industry is facing a lot of problems which is causing a major setback in its growth. The Silk Industry of Assam is highly unorganized because there are less or no educated laborers which results in shortage of agricultural laborers ultimately leading to production shortage. The Assam silk industry, known for producing exquisite silk varieties like Muga, Eri, and Pat silk, faces several marketing challenges that hinder its growth and global competitiveness. Despite being geographically unique particularly Muga Silk, its brand identity is not widely recognized in outside the market. Its reach is restricted to premium and high-end fashion markets due to this lack of worldwide awareness. The majority of Assam’s silk output is limited to local and regional markets. The industry’s minimal web presence and inadequate marketing infrastructure make it difficult for it to penetrate larger domestic and international markets. Silk from Assam is not sufficiently promoted in international forums. There are government initiatives; however, there is a lack of consistency and broad audience reach in marketing activities. In marketplaces where there is competition, this causes the silk to be less visible.Producing Assam silk, particularly Muga silk, requires a lot of work and money. The final product’s high cost of manufacture restricts its customer base to a premium market niche. This lowers total sales and narrows the target market.

3.1 Overview of the Global Carbon Market in Pre-Kyoto Protocol Phase

At the First COP in Berlin in 1995, the UNFCCC launched a pilot phase of projects to build experience and “learning by doing”. The pilot phase was termed Activities Implemented Jointly (http://unfccc.int/program/coop/aij/aij_np.html). Under the Activities Implemented Jointly, Annex I Parties could implement projects in other countries that reduced emission of greenhouse gases or enhanced removals of sinks. The number of projects registered under Activities Implemented Jointly has been growing since its launch and as of 2002 (the latest report available) there were 157 projects – 45 percent of which are in developing countries. The total amount of money invested by private sector companies as of 2000 was about $160 million. Because of the expectations that sink projects would be included as a mechanism for achieving targets, several pilot projects were voluntarily implemented involving mostly private sector entities (e.g., electric utility companies, oil companies and environmental non-governmental organisations). Between the beginning of 1996 and the end of 2003, 76 transactions involving carbon sequestration in the LULUCF sector were signed, representing 40 million tCO2-e. Relative to all of the carbon transactions that took place over the same period, sink projects accounted for 21 percent of the total number and 23 percent of the total volume. In volume terms, carbon sequestration projects were the single largest project category, and more than three-quarters of this volume was transacted between 1996 and 1999.

As a developing country, India does not have any emission reduction target, but it is able to sell CERs pursuant to the CDM, to large emitters covered by the EU ETS, countries that have emission reduction targets under the Kyoto Protocol, or any other entity that wishes to purchase such CERs for compliance purposes. It can also supply ERs and VERs for the growing voluntary markets.

4.1 Status and Trends

India’s participation in the carbon markets has contributed to the recognition that it is a useful tool in attracting climate friendly investments. India was an early player in the market, and it used the hosting of the Eighth Conference of Parties to the UNFCCC in Delhi in October 2002 to sensitize the business community about the opportunity provided by carbon finance and the modalities of the emerging CDM. In 2004, the growth in the Indian carbon market was fostered by a healthy number of indigenous management and technical consultants, which began to offer services to potential sellers of emission reductions, and the response from primarily the private sector to capacity building initiatives concerning the nascent market. In its capacity as the Designated National Authority (DNA) for the CDM, the Ministry of Environment and Forests (MOEF) also had the foresight to develop simple and transparent rules, whereby project developers can obtain a Letter of Approval (LOA) theoretically within sixty days, which is a key step required for project registration. By the end of 2004, India was the market leader in the forward sale of emission reductions, with 50 % of the supply market. Early successes included the registration of two projects which consisted of the thermal oxidation of HFC-23 generated as a buy-product during the manufacturing of the refrigerant HCFC-22, but also a number of small scale co-generation projects using bagasse, rice husk and mustard crop residues as a source of biomass, and small scale hydropower projects.

The research locale is a crucial aspect of any research study because it can have a significant impact on the data collected, the results obtained, and the conclusions drawn from the research. The selection of the research locale should be based on the research questions, objectives, and methodology of the study. The characteristics of the research locale such as its physical, social, cultural, and economic attributes, and the population being studied, can affect the research outcomes.

To accurately understand and interpret the data, used in social science research, it is necessary to have a thorough understanding of the attitude, behaviour and characteristics of the individuals who live in the area being studied. This section of the research critically examines the socio-demographic background of local people in a rural setting. The research setting refers to the context in which the research is conducted, and it plays a crucial role in shaping the interplay of different factors and components that influence the study’s outcomes. The research setting is essential because it provides a contextual framework that helps to inform the researcher’s interpretation of the data. By understanding the characteristics and context of the research area, the researcher can more accurately conceptualize and interpret the data, leading to a more nuanced understanding of the implications and behavioural complexities of the individual and the larger community.

Abstract

The functioning and stability of terrestrial ecosystem are determined by plant biodiversity and species composition. So far, little attention has been paid to the effects of microbe-plant interactions, particularly the mycorrhizal symbiosis, on ecosystem variability, productivity and plant biodiversity. The most common type of mycorrhizal association is the arbuscular mycorrhizal (AM) type. The role of AM fungi in the uptake of diffusion limited nutrients like P and in conferring resistance to soil-borne-diseases is well documented.

Abstract

Study was undertaken to investigate the toxicity of heavy metals on the structure and function of ectomycorrhizal fungi and their ability to colonize the pine seedlings. Ectomycorrhizal fungi were isolated, cultured and multiplied on MMN medium. Six heavy metals (Cd, Ni, Zn, Pb, Cu and Al) were selected and different concentrations viz; 0 ppm (control), 10 ppm, 50 ppm, 100 ppm, 200 ppm and 500 ppm were used for treating the seedlings. The study was continued for one year. Different growth parameters were measured. Factors such as soil moisture, pH and soil organic carbon on ectomycorrhizal colonization were also analyzed. The mycorrhizal colonization was more in those seedlings having lower concentration of heavy metal treatment. Statistical data analysis has shown that the heavy metals had negative correlation with mycorrhizal colonization. High concentration of metals were toxic to external mycelium, which ultimately resulted in reduction of ectomycorrhizal development. The accumulation of metals in the fungal mycelium and protecting root against metal toxicity was an important factor.

Abstract

Excessive use and treatment of soil with pesticides under the adage, “if little is good, a lot more will be better” has played havoc with human and other life forms and can also cause populations of beneficial soil microorganisms to decline, which indirectly affect soil fertility. Soil constitutes a major environmental sink for many pesticides. These pesticides are either taken up from soil by plants and then pass into the bodies of invertebrates, water or air, directly or indirectly and affect public health and beneficial biota of the ecosystem. Bioremediation provides very attractive, eco-friendly and economic solution to many of our hazardous pollution problems. For both economic and ecological reasons, biological degradation has become an increasingly popular alternative for treatment of hazardous wastes.