eChapters

River-training works guide and regulate the flow of a river to achieve a stable channel alignment, protect banks, improve navigation, prevent erosion, and reduce flood damage. Rivers naturally change their course through sediment deposition, bank cutting, meandering, and variations in discharge. Engineering interventions must therefore account for hydraulic forces, sediment movement, channel morphology, and long-term river behaviour. This chapter defines river training and explains its objectives, benefits, limitations, and key design principles. It discusses guide banks, groynes or spurs, embankments, revetments, pitching, launching aprons, cut-offs, and related protective works. It also considers structural placement, classification, construction materials, maintenance, and environmental consequences.

Flood routing predicts how a flood hydrograph changes as it passes through a river reach or reservoir. Storage, channel geometry, friction, inflow distribution, and outlet conditions generally reduce, delay, or otherwise modify the flood peak. Routing results help forecast downstream water levels, determine reservoir releases, design spillways and channels, issue warnings, and evaluate flood-control alternatives. This chapter introduces the continuity and storage principles underlying flood routing and distinguishes reservoir routing from channel routing. It discusses hydrologic and hydraulic approaches, including level-pool, Muskingum, and related techniques. Attention is also given to inflow and outflow hydrographs, routing coefficients, travel time, attenuation, data requirements, assumptions, calculations, and practical engineering applications.

Soil mechanics as a distinct branch of soil science is comparatively of recent growth. Its need arose from the fact that the requirements of the engineer are very often quite different from those of the agriculturist. Whereas the former would as a rule require hard, compact, impervious soil, the latter would have no use for it for the growth of his plants which require soft, friable and porous soil. The agriculturist generally has to look up to nature to help him out of his difficulties, the engineer has to depend on his scientific skill to modify the soil to suit his requirements. In this chapter an attempt will be made to explain in a simple language the requirements of the building, road, and irrigation engineer for particular types of soils and how they are met by modifying the soil if the required properties already do not exist.

Rice is one of the major staple food of the world’s population. About 114 countries grow rice and more than 50 have an annual production of 100,000 tonnes or more. Asian farmers produce about 90 per cent of the total, with two countries, China and India, growing more than half of the total crop. For most rice producing countries where annual production exceeds one million tonne, rice is the staple food. In Bangaldesh, Cambodia, Indonesia, Lao PDR, Myanmer, Thailand and Vietnam, rice provides 50–80 per cent of the total calories consumed.

The Sun is the primary source of heat to the Earth and its atmosphere. The heat received from other celestial bodies as well as the interior of the Earth is rather too significant. The distance that separates the Earth from the Sun is about 149.0 million km. The diameter of the Sun measures roughly about 1.3824 million km. The surface temperature of the Sun is estimated between 5500^o C and 6100^o C. (or 5762^o K).

The weight of the sun is about 1.9 X 10 30kg. The radius is 6.97 X 10 8 m or the diameter of the sun is 14 X 10 5 km. The mass of the earth is 6 X 10 24 kg, the radius is 6.4 X 10 6 m. The gravitational force of the earth is 9.81m/s². Whereas the sun‘s attractive force is 274m/s². This is 25 times higher than earth’s gravitational force.

Abstract

A very strong shallow focus submarine earthquake (of magnitude 9.0) occurred off the west coast of Sumatra Island due to the movement of Indian Plate and Burma Plate on 26th December 2004 at 06:18:53 IST. A vast area around its epicentre was rocked including Andaman and Nicobar Islands and parts of the eastern and western coasts of the Indian mainland. This earthquake had generated a global tsunami, which had also pounced on the Andaman and Nicobar Islands and the coasts of Andhra Pradesh, Tamil Nadu and Kerala and caused severe damage to the coastal population and infrastructure. Considering the devastation of this tsunamigenic earthquake, the Department of Science & Technology, Govt. of India has launched a coordinated programme for imparting S & T inputs with futuristic approach to support rehabilitation programme in the affected areas on a sustainable manner. The main objective of the programme is to generate geospatial databases on damages and risk zonation using pre and post-tsunami remote sensing (RS) data along with collateral attribute data in GIS platform. This paper speaks on the damage assessment (both natural / physical resources and human resources) caused by the earthquake and tsunami covering parts of Andaman Islands along with strategies for risk management and constraints and alternatives for micro level planning.

Keywords: Tsunamigenic earthquake, Damage Assessment, Remote Sensing and GIS, Andaman - Nicobar.

6.1 Introduction

Torrefaction is a thermophilic process of biomass conversion into a solid, friable, homogenous coal-like material, which has better fuel characteristics than the original biomass. Torrefaction involves the heating of biomass material in the absence of air at 250 to 300°C temperature. Torrefaction produces high-grade hydrophobic nature solid biofuels from various streams of woody biomass or agro residues.Torrefied biomass has high energy density then the original biomass which make torrefied biomass as renewable alternate source for power generation in coal power plant. Torrefied biomass being hydrophobic in nature can be stored easily for longer duration with negligible biological degradation. At 250-300°C temperature volatilization has been taking place and around 30% mass of the biomass is reduced as compared to original untorrefied biomass with net energy loss of approximately around 10%.The end product is a predictable, homogeneous, hydrophobic, high value solid biofuel with far higher energy density and calorific value than the original biomass feedstock. During the torrefaction process a combustible gas is released, which can also utilised to provide heat to the process. The process diagram of torrefaction process is shown in Fig. 6.1.

Introduction

Water is a precious natural resource vital, for sustaining all life on the earth. It is in a continuous circulatory movement - hydrologic cycle. It is not uniformly distributed in time and space. Due to its multiple benefits and the problems created by its excesses, shortages and quality deterioration, water as a resource requires special attention. On a global scale, total quantity of water available is about 1600 million cubic km. The hydrological cycle moves enormous quantities of water about the globe. However, much of the world’s water has little potential for human use because 97.5% of all water on earth is saline water. Out of remaining 2.5% fresh water, most of which lies deep and frozen in Antarctica and Greenland, only about 0.26% flows in rivers, lakes and in the soils and shallow aquifers which can be readily used. Sustainable water management in India is fast becoming a necessity, with the looming crisis over water resources in the country threatening the security and livelihood of the population and the environment over the coming decades. Managing water resources, river catchments, and coastal zones are outstanding challenges of today and tomorrow’s. Global changes ask for a comprehensive scientific approach, an international multi-disciplinary orientation and require a new mind-set towards water and coastal management problems.

Key words : Flood Plains Agro-ecosystem, GIS, RS, Spatial Cropping Pattern, Radiometric Normalization, NDVI, Agricultural Systems.

Introduction

Of late, evidence is accumulating to suggest that high productivity and growth rates achieved during the Green Revolution era in the well-endowed regions of the country (i.e North West India) are no longer being sustained to meet the needs of still increasing population in the country. Past growth sources have nearly exhausted and there is also no scope for expansion of crop land. Indeed pressure for competing land uses will likely reduce area under food grain crops. Shrinking natural resource base (per capita availability of land and water devoted to agriculture), declining quality of resources and environmental degradation issues will imply increasing threat to our ability to meet the basic needs of the growing population of the region unless we shift our effort to potential regions like flood plains of the country for improving productivity.

The flood plain riverine lands of India covering approximately 42 m.ha though most endowed with natural resources and has all the potential of becoming rich, is still economically backward. The reason behind this paradox of extent of poverty in the midst of richness of resources is that the natural resources of the region are not being productively harnessed into the process of the economic development and thus are not delivering their potential and commensurate benefits to the people. The Green Revolution technologies evolved during of 60’s and 70’s had little or no impact in this region of the country. Undesirable spatio-temporal distribution of flood in these areas keeps agriculture under uncertainty and risks. These are also the areas where the poorest are concentrated and agriculture largely continues to be more of subsistence. The nature of agricultural problems are highly variable due to great diversity in the production system as also in the socio-economic conditions of the communities requiring location specific approaches to address the problems and enhance the productivity.

Climate-smart Agriculture Practices and Indicators

Considering the three pillars of climate-smart agriculture such as productivity, adaptation and mitigation, different technologies and practices have been evolved.

The CSA practices are grouped under soil and land management, water management, crop management, livestock management, forestry, fishery & aquaculture and energy management. The World Bank Group (2016) has suggested broad indicators of CSA practices (Table 7.1; Chapter 7)

Digital image processing is the use of computer algorithms to perform image processing on digital images. As a subcategory or field of digital signal processing, digital image processing has many advantages over analog image processing. It allows a much wider range of algorithms to be applied to the input data and can avoid problems such as the buildup of noise and signal distortion during processing. Since images are defined over two dimensions (perhaps more) digital image processing may be modeled in the form of multidimensional systems. Introduction to image processing 
Image processing is a method to convert an image into digital form and perform some operations on it, in order to get an enhanced image or to extract some useful information from it. It is a type of signal dispensation in which input is image, like video frame or photograph and output may be image or characteristics associated with that image. Usually image processing system includes treating images as two dimensional signals while applying already set signal processing methods to them.
Image processing is a method to perform some operations on an image, in order to get an enhanced image or to extract some useful information from it. It is a type of signal processing in which input is an image and output may be image or characteristics/features associated with that image. Now-a-days, image processing is among rapidly growing technologies. It forms core research area within engineering and computer science disciplines too.

The Jammu and Kashmir State lies in the extreme North of the Himalayas and constitutes about 67.5 per cent of the North West Himalayan region. The State is predominantly a mountainous state with all the major Himalayan ranges and trans-Himalayas adequately represented. The State of Jammu and Kashmir located in the north Western corner of India, extends between 32o-17' and of 37o-50' North parallels of latitude and 73o-26' and 80o-30' East of meridians of longitudes and 81o East of Greenwich. The State on the basis of physiography may be divided into three main regions (i) outer Himalayas which comprise of Jammu province (ii) lesser Himalayas which comprises of Kashmir Valley and (iii) inner Himalayas which comprise of Ladakh province. Jammu, Kashmir and Ladakh regions have distinct agro climatic characteristics. Jammu region has two different climatic zones depending primarily on altitude. Lower hills & plains bear subtropical climate with hot dry summer lasting from April to July. The summer monsoon commences around first fortnight of July and fading away in early September.

Bihar’s economy is highly dominated by agriculture and allied sectors. Around 85 to 90 percent of the population still lives in rural areas, where agriculture along with animal husbandry, is the main source of their livelihood. In Bihar, the gross and net sown area is estimated at 8.26 and 5.64 million hectares, respectively. Nearly 60 per cent area under cultivation in the state is rainfed (Anon, 2008). The region comes under sub-humid subtropical monsoon climate. Most of the annual rainfall (almost 85 per cent) received from south-west monsoon, occurs during June to September (Sattar, 2010). There are three crop growing seasons in the state commonly known as kharif, rabi and zaid. The important kharif season crops, which are planted in May-June and harvested in September–October, are rice, maize, sesame, sorghum and bajra. Pigeon pea is an important long duration pulse crop sown during kharif season as sole crop or intercropped with maize. The important rabi crops which are sown in October–November and harvested in February–March are wheat, rabi maize, potato, chickpea, lentil, rapeseed, mustard, barley.

This chapter describes methods for evaluating soil reaction, salinity, organic matter and plant-available nutrients. It begins with soil pH and electrical conductivity, explaining their importance in nutrient availability and the identification of acidic, saline or alkaline conditions. Procedures are then provided for estimating organic carbon, available nitrogen, phosphorus, potassium and sulphur. The chapter also covers calcium, magnesium and micronutrients, including zinc, iron, copper, manganese, boron and molybdenum. Every method identifies the necessary apparatus and reagents and explains extraction, colour development, instrumental measurement, calculation and interpretation. Particular attention is given to calibration, sample preparation, reagent quality, contamination control and laboratory safe

Climate change is a multifaceted alteration of climate which is perceptibly subtle and yet continuous, nevertheless it is extremely important due its consequences on whole biome that thrives under constant or relatively unchanged climates. The effects of climate change have reached such an extent that irreversible changes in the functioning of the planet are feared. Some of the main effects of climate change with specific reference to agriculture and food production especially during the last decade are: increased occurrence of storms and floods; increased incidence and severity of droughts and forest fires; steady spreading out of frost-free intervals and potential growing season; increased frequency of diseases and insect pest attacks; and vanishing habitats of plants and animals. Currently, the world is facing a challenge of producing sufficient food from dwindling natural resource base for the constantly increasing population.

Black pepper (Piper nigrum L.), famous as “Black Gold” and also known the “King of Spices” is the most important agricultural commodities of commerce and trade in India. It is the most important, most popular and most widely used spice in the World. Of the total spices traded internationally, black pepper accounts for 34 per cent. South West India is the traditional home of this important spice, particularly the Malabar Coast. Black pepper is also grown in tropical zones such as the Asia Pacific Region, mainly India, Indonesia, Malaysia, Sri Lanka, Thailand, China, Vietnam and Cambodia. Outside the Asia Pacific region, the crop is distributed in Brazil, Mexico, Guatemala, etc., totaling about 26 countries. It is grown successfully between 20°N and 20°S latitude and from mean sea level to 1500 meters above sea level. World’s black pepper production varies in the range of 2.7 to 3.35 tonnes annually. The major production share is contributed by Vietnam with an annual production of 80,000 tonnes. About 85 per cent of the World trade of pepper is determined by the largest pepper producing countries in the International Pepper Community (IPC). World export fluctuates around 1.5–2.5 lakhs tonnes per annum. Global black pepper supply has shown a drastic increase over last ten years except in 2008–09. Vietnam’s sudden increase in production has resulted in the massive global out put of 3–3.5 lakhs metric tonnes from 1.9–2.0 lakhs metric tonnes in late nineties. 

1.1 Introduction to Sustainable Energy
The idea of sustainable energy has come to light in the twenty-first century as the globe struggles with rising energy demands, environmental degradation, and the menacing threat of climate change. It offers hope and a way forward for a more promising future. A major change in the production, distribution, and consumption of energy resources is what sustainable energy entails. It is a paradigm that includes a range of clean and renewable energy sources, technologies, and methods with the goal of supplying our energy demands with the least amount of harm to the environment (Andrews and Shabani, 2014). 1.2 Importance of Sustainable Energy Sources Sustainable energy is of paramount importance due to several interconnected reasons listed below and shown in Figure 1:
1.2.1 Environmental Concerns: For many years, conventional fossil fuelbased
energy sources like coal, oil, and natural gas have formed the foundation of our energy system. But as they burn, greenhouse gases (GHGs) mostly carbon dioxide (CO2) are released into the environment (Hosseini and Wahid, 2016). These greenhouse gases are the main causes of climate change, which raises global temperatures, brings on harsh weather, and raises sea levels. Conversely, sustainable energy sources are crucial for reducing climate change because they emit little or no greenhouse gases when in use.
1.2.2 Finite Nature of Fossil Fuels: Because fossil fuels are limited resources,
their stocks are running out quickly. The task that follows is to ensure that future generations have access to economical and dependable energy sources. Because they are renewable or endless, sustainable energy sources provide a solution to the problem of energy security (Su-Ungkavatin et al., 2023).
1.2.3 Economic Benefits: Making the switch to renewable energy can be
very profitable. It can improve national energy security and lessen trade deficits by fostering innovation, generating jobs, and lowering dependency on energy imports. Furthermore, because they frequently have lower operating and maintenance costs than fossil fuel-based systems, sustainable energy technologies can result in cost savings over time (Shafiei et al., 2015).

Coffee is grown at higher elevation across the Western Ghats between 750 and 1200 m amsl. It requires a certain degree of shade for its better performance.  The annual rainfall over the coffee growing tracts varies between 1400 and 2600mm, having uni/bi-model rainfall with prolonged dryspell from November to May. It is more so over North of the Western Ghats. The mean annual maximum temperature varies between 24 and 300C while the minimum between 15 and 180C. The difference between maximum and minimum temperatures (temperature range) varies between 5 and 160C across the coffee tract. The ‘Monsooned Malabar Coffee’ is a specialty coffee produced from the erstwhile ‘Malabar Region’. It undergoes certain changes in physical and biochemical characters when the coffee beans are processed during the summer monsoon (June to September). It is processed at Mangalore, located in Coastal Karnataka. The processing location experiences heavy rainfall of more than 1000 mm in July, followed by 950 mm in June and 600 mm in August. Out of 3264 mm of annual rainfall, 2852 mm is received during the monsoon period. It accounts more than 80 per cent of annual rainfall. The maximum temperature during the coffee monsooning period varies between 28 and 30°C while night temperature revolves between 22 and 24°C. Being located in the tropics along the West Coast, the crop processing environment in terms of surface air temperature is relatively uniform and moderate with a characteristic feature of heavy clouds and continuous rainfall during the monsoon period. These monsoon features are more predominant from the middle of June to August during which the coffee beans are subjected to monsooning. The coffee beans
bulge in the process of monsooning and the volume increases significantly due to absorption of atmospheric moisture. It is directly related to the monsoonal wind during which coffee beans are processed. The bulging was less in all the samples processed during monsoon 2003, which varied from 2.1 to 2.7 ml/100 number, while it ranged between 2.7 and 5.8 ml/100 number in the samples processed during monsoon 2004.

Introduction
Plant protection is a critical component of modern agriculture, aimed at safeguarding crops from diseases, pests, and weeds that can significantly impact yield and quality. Chapter 10 explores the science of plant protection, focusing on the various disciplines that contribute to maintaining healthy crops and ensuring food security. The chapter begins with an overview of plant pathology, the study of plant diseases caused by pathogens such as fungi, bacteria, viruses, and nematodes. Key principles of plant pathology are discussed, including the nature of plant diseases, their modes of transmission, and the factors that influence disease development. This section also highlights the importance of accurate disease diagnosis, which is essential for implementing effective prevention and control measures. Entomology, the study of insects and their interactions with plants, is another crucial aspect of plant protection covered in this chapter. The principles of entomology are examined, with a focus on the identification and management of insect pests that threaten crops. Various pest management strategies, including biological, chemical, and cultural methods, are explored, emphasizing the need for a holistic approach to pest control. Integrated Pest Management (IPM) is a central theme in plant protection, combining multiple strategies to manage pests in an environmentally sustainable manner. The chapter discusses the advantages of IPM, such as reduced reliance on chemical pesticides and minimized environmental impact, as well as the challenges associated with its implementation. Integrated Disease and Pest Management (IDPM) is also introduced, which integrates plant pathology and entomology principles to develop comprehensive management strategies that address both diseases and pests. The chapter further explores the role of pesticides in plant protection, including their benefits and potential risks. Safety measures for pesticide use are emphasized to protect both human health and the environment. Integrated Weed Management (IWM) is also discussed as an essential component of plant protection, with strategies for managing weeds that compete with crops for resources. The importance of plant protection sciences in food security is highlighted, particularly in the context of pest management, disease control, and weed management. These disciplines contribute to sustainable agriculture by enhancing crop yield and quality while promoting environmental sustainability.

ABSTRACT
Biomethanation is the process of generating energy from anaerobic digestion (AD) of organic refuse. This helps reduce dependency on fossil fuels while reducing CO₂ emission. Organically-rich kitchen refuse (KR) generated daily from the households all over the world could be a good candidate to biogasify, though the quantity and quality of biogas depends on the KR proximate. To enhance biogasification, KR is subjected to physical, chemical and/or biological pretreatment. Physical pretreatments include chopping, grinding, ultrasonication and steam explosion, whereas chemical pretreatments could be by an alkali or a base. Biological treatment involves digestion of the organic matters by individual microbe or its consortium, although it takes place naturally. For biological treatment, standardising the substrate and inoculum ratio is essential. Candidate strains must be mutually compatible to formulate a microbial consortium. Bacillius seems to be a potential candidate as it is a facultative anaerobe exhibiting multiple essential enzyme activities (viz., amylase, cellulase and lipase). Maintaining an optimal pH of 7.0 and temperature of 37°C before and during anaerobic digestion is suggested. Other important factors in digestion include organic loading rate, retention time, C/N ratio, volatile fatty acids (VFA) concentration, etc. VFA content is vital as its accumulation during acidogenesis adversely affects the AD by dropping pH values to unfavourable levels. Acetogens convert VFA to acetate, CO₂ and H₂ in acetogenesis, finally converting it to CH4 in methanogenesis. For effective methanation,