eChapters

Key facts
    
•    Dioxins are the most dangerous and ‘super toxic’ chemicals so far known on the earth and three closely related families are collectively known as dioxins. These are Polychlorinated dibenzo-p-dioxin or dioxins (PCDDs), Polychlorinated dibenzofurans or furans (PCDFs) and polychlorinated biphenyls (PCBs).
    
•    2, 3, 7, 8-TCDD (or called TCDD) is the most potent of all the congeners. The toxicity equivalency factor or TEF of TCDD has been assigned as 1, while all other congeners assigned in order of toxicity ranking magnitude relative to TCDD.
    
•    There are 75 compounds/congeners in the dioxin family (PCDD), 135 compounds in the furan family (PCDF) and 209 possible compounds in the PCBs based on the possible number of chlorine atoms.
    
•    The toxicity of dioxins and dioxin-like compounds vary substantially among the different PCDDs, PCDFs and PCBs. It is generally accepted that only 29 out of the 419 congeners of dibenzo-p-dioxins, dibenzofurans and polychlorinated biphenyls are toxic to humans and other organisms. The TCDD is most toxic and registered by the WHO as carcinogenic for humans.

The global economy has adversely been affected to a considerable extent due to weather related disasters which are not uncommon in the recent past due to global warming and climate change. It is true in the case of the Indian economy too. The year 2010 was the warmest year ever recorded, followed by 2009 in India. The year 2015 was the warmest year globally. Model simulations indicate that a marked increase in rainfall and temperature over India would be seen during the current century. The maximum expected increase in rainfall is likely to be 10–30% over the Central India. Temperatures are likely to increase between 2 and 3^oC by the end of 2100 A.D. Greater number of high surges and increased occurrence of cyclones in post monsoon period along with increased maximum wind speed are also expected along the East Coast of the Country. As a result, the occurrence of floods and droughts, cold and heat waves adversely affected the foodgrains production to a large extent across the Country in one or other region as seen in 2014, 2012, 2009, 2004, 2002 and 1987. It is true in the case of plantation crops also, which are predominantly grown in the Humid Tropics like Kerala (8°15` N and 12°50`N latitudes and between 74°50`E and 77°30`E longitudes). As seen in previous chapters, summer drought and heavy rains including waterlogging during monsoon period is a threat to plantation crops production in the Humid Tropics to a considerable extent. Waterlogging and floods due to excess rains could be minimised by providing surface and subsurface drainage facilities in plantation gardens which will improve the soil health and nutritional status, in turn yields can be increased in plantation crops.

3.1 Introduction

The sun emits electromagnetic radiation, which is referred to as solar radiation. Every location on the Earth’s surface receives some sunlight during the course of the year, but the amount of solar radiation varies. On a daily basis, we see much less energy from the sun than it emits and incident upon the earth. In an hour and a half, the amount of sunlight that reaches the surface of the earth is enough to provide enough energy for an entire year. 

Drought, a recurring and often devastating feature of climate variability, presents a unique challenge due to its slow onset, complex nature, and farreaching consequences. Unlike hazards with clear event boundaries, drought manifests across diverse spatial and temporal scales and impacts nearly every facet of the environment and human activity. Effectively understanding and managing this phenomenon necessitates an equally comprehensive approach: drought monitoring. This chapter introduces the essential concepts and methodologies underpinning this critical field, highlighting the remarkable breadth required to capture the full picture of drought conditions. • The scope of drought monitoring is inherently vast. Geographically, it spans from tracking localized water stress affecting a single farm or watershed to assessing conditions across entire regions, nations, and continents. Temporally, monitoring efforts must consider short-term deficits unfolding over weeks or months (critical for agriculture) as well as long-term hydrological imbalances developing over seasons, years, or even decades (impacting reservoirs and groundwater). Understanding current conditions crucially relies on comparing them against a deep historical context, requiring decades of baseline data

Designing an earthen dam requires the coordinated evaluation of catchment runoff, reservoir capacity, site conditions, foundation properties, expected service life, and the consequences of failure. A selected return period is used to estimate extreme rainfall and runoff, while adequate spillway capacity and freeboard protect the embankment against overtopping. The dam must possess low permeability, stable upstream and downstream slopes, and sufficient resistance to seepage, settlement, erosion, and earthquake forces. This chapter presents design criteria, top width, dam height, side slopes, freeboard, seepage-control components, slope-protection measures, and stability considerations. It also explains procedures needed to create a safe, economical, and functional embankment.

Multipurpose trees and shrubs are defined as all woody perennials that are purposefully grown to provide more than one significant contribution to the production and/or service functions of a land-use system that they occupy. In agroforestry systems, different species of trees and shrubs can be planted with many types of crops in a variety of patterns. Thus, it is required to know about the methods of propagation and nursery raising, planting and other silvicultural management practices along with the diverse uses of multipurpose trees and shrubs of tropical and subtropical areas before their selection for forestry and agroforestry activities. It is important to select the most suitable tree species since it is not easy to replace them once they have been planted.

Mangium (Acacia Mangium)

Acacia mangium is a single-stemmed evergreen tree that grows to 25-35 m in height and up to 60 cm in diameter. The bole is usually straight, often fluted near the base, free of branches for up to half its height. Mangium is native to Australia, Indonesia and Papua New Guinea. However, it tolerates varied site conditions and has adaptability to different planting objectives. Mangium shows most vigorous growth on well-drained, fertile soils in high rainfall areas in the humid tropics. It is valued for its rapid growth and has been planted throughout the humid tropics and is a major plantation species in the Asia Pacific. Provenances from Papua New Guinea consistently show better growth in height and diameter.

Introduction

Human civilization used to undergo several form of disasters throughout its life history. Most of such events are unpredictable, sudden and short in duration, and such events can easily classifiable as either natural (e.g. cyclones, earth quake, natural forest fires and tsunami) or manmade such as spread of toxic chemicals (e.g. Bhopal disaster 1984), nuclear explosions, civil war, diseases (Minamata, itaiitai, etc.). However, climate change is a real time prolonged disaster which is caused by both natural (caused by variation in solar irradiance, variations in orbital parameters of earth, volcanic activities, natural forest fire, methane release from thawing of permafrost from ocean floor, natural wetlands and cattle) and anthropogenic means (by greenhouse gases resulted from human activities-all kinds of combustion, industrial production of greenhouse gases and agricultural water lodging activities such as paddy cultivation and artificial wet lands, and deforestation).

Key words : Remote Sensing, Ecosystem, Environmental Pollution, Biodiversity Conservation, Coastal Environmental Degradation, Wetland.

Introduction

National prosperity and human resources development are primarily shaped by the availability of natural resources and their use. None the less, the benefits are quite often negated by the resultant environmental degradation concomitant with their utilisation for economic values. The problems of environmental degradation have assumed critical dimensions in many parts of India due to resources exploitation; industrialisation and urbanisation, unchecked population growth and a never ending quest for energy to meet the increasing demands. Moreover, improper utilisation of resources has resulted in such environmental problems as soil erosion, waterlogging, floods, droughts and pollution of various types besides socio-economic disparity among people.

After the 1972 Stockholm conference on Human Environment and Development, there has been a phenomenal increase in the worldwide interest in the environmental issues associated with development. Consequently, the focus of development has shifted to environment friendly and sustainable developmental planning in recent years. The Rio Summit (June 3-14, 1992) further emphasised the fact that earth is an integral and interdependent system, which require sustainable developmental planning. During deliberations of the Rio Summit (Earth Summit), it was emphasised that satellite imagery will be quite helpful in monitoring earth’s environment.

India has a long tradition of environmental protection and has enacted laws during the last three decades to give further impetus to the conservation of natural resources and protection of environment. Some of the important laws are:

4.1. Introduction

Presently, in the world, there are 195 countries according to the United Nations, and the number would even go up to 247 if we consider the disputed territories like Isle of Man, Hong Kong, etc. (United Nations, 2016) (Kershner, 2020). But the majority of the countries are still struggling to provide basic life-supporting amenities like nutrition, shelter, and employment. Conjointly, termed as emerging and developing countries such as India, Vietnam, Venezuela, Utopia, etc. (Ahmed and Shimada, 2019). Most of the developing countries are situated mainly in the continent of Africa, Asia and South America. They have got independence for the European countries like England, France, Portugal and Spain in the mid and late 20th century. 

Introduction to Energy Sources

Consumption of nonrenewable energy sources has caused more environmental harm than any other human activity during the last century. Electricity generated from fossil fuels like coal and crude oil has resulted in excessive levels of hazardous gases in the environment. As a result, several issues exist now, such as ozone depletion and global warming. Vehicle pollution has also been a significant issue.

As a result, alternative energy sources have become increasingly vital and relevant in today’s society. These sources, such as the sun and wind, can never be depleted and are hence referred to as renewable. They produce fewer emissions and are readily available locally. Their application has the potential to significantly reduce chemical, radioactive, and thermal pollution. They stand out as a promising source of infinite clean energy. These are also known as non-conventional energy sources.

1. Introduction
In recent decades, environmental contamination has emerged as a seriousthreat to our modern society. The relentless growth of urbanization andindustrialization leads to the ever-increasing production of hazardouschemicals. Safe disposal of these hazardous materials is crucial, as releasingthem into an already strained environment has severe consequences. Theexponential rise in human activity is directly related to the alarming risein local and global pollution levels, which severely disturbs the balance ofecosystems. Industrial activities, in particular, are a major source of highlyhazardous chemicals such as dyes, pigments, and aromatic compounds,which pose a serious threat to the environment. In India, the textile industry, amajor force driving the country’s economic growth, also ranks asthsecondlargestpolluter. The printing, finishing, and dyeing processes used in textileproduction generate significant waste (Dubey et al., 2018). Dyes, a majorsource of pollution in this industry, are syntheticand complex in structure. Thiscomplexity makes them poorly soluble in water, hindering biodegradation andposing a long-term environmental concern. The global textile industry utilizesa wide range of dyes, with estimates indicating over 100,000 commerciallyavailable options. The worldwide production of these dyes is estimated to be700,000 tons per year (Al-Tohamy et al., 2020). However, dye contaminationis a major challenge in this industry. Studies indicate that during synthesisand dyeing processes, a significant portion, ranging from 10% to 15% of thetotal dyestuffs used ends up released into global water bodies (Leal et al.,2020). A significant portion of textile dyes, ranging from 2% to 20%, aredirectly released into water reservoirs through wastewater effluents. This is

The vulnerability of agriculture and livelihoods in the Member Countries of the Centre on Integrated Rural Development for Asia and the Pacific (CIRDAP) poses a significant threat to achieving climate- resilient rural development. CIRDAP includes 15 member countries: Afghanistan, Bangladesh, Fiji, India, Indonesia, Iran, Laos, Malaysia, Myanmar, Nepal, Pakistan, Philippines, Sri Lanka, Thailand, and Vietnam [CIRDAP, 2023]. ]. In many Asian countries, agriculture is still practiced using traditional methods that do not incorporate climate data or modern techniques. This reliance leads to several challenges, such as reduced productivity and crop diversity, increased vulnerability to weather fluctuations, and hindrance in establishing resilient value chains. For example, in Iran's rural sector, challenges such as centralized planning, patriarchal norms, inefficient extension systems, and weak inter-agency coordination are uniquely defining features (CIRDAP, 2025). However, evidence shows these challenges are widespread across the region:

The remains of animals and plants of past ages preserved in the rocks are known as fossils, the study of which forms the subject of Palaeontology. The conditions for an animal or plant to become a fossil are firstly it must possess skeleton of some kind or some hard parts, since the soft parts are decomposed rapidly, secondly the organism must be covered up by sedimentary layer, otherwise it will soon crumble to pieces.

5.1 Modes of Preservation of Fossils

The conditions in which fossils occur depends, on their original composition and on the material in which they are embedded. The chief types are as follow:

5.1.1 The entire organism preserved

Occasionally the soft parts of the organism are preserved as well as the skeleton, the whole having suffered very little change. Instances of this are the woolly rhinoceros and mammoth found frozen in the mud and ice in Northern Siberia. Insects encased in fossil resin, known as amber, are found in the Oligocene beds in the Baltic shores of Persia, but the soft part of organisms are rarely preserved.

5.1.2 The skeleton preserved almost unchanged

Sometimes where the skeleton alone is preserved, it remains almost in its original condition, except that it has lost its organic matter. Thus the shells in the Pliocene beds of England differ from living ones only in being lighter, more porous and generally colourless. In some instances a certain amount of mineral matter, such as carbonate of lime, has been added to the skeleton, making it heavier and more compact.

Abstract

In its natural environment, a plant faces various types of stressors. In fact, stress in moderation is a welcome event in plants. Only when it is in excess, would it compromise the productivity of plants. Beyond a threshold, stress (biotic and abiotic) has a detrimental effect on plant growth causing extensive yield losses in crop plants worldwide. Plants being sessile, have evolved a complex set of mechanisms to perceive the changes in the environment. Plants respond to minimize the potential damage due to stress while simultaneously preserving resources vital for their growth and development. The chapter presents an overview of various types of biotic and abiotic factors that act as plant stressors and the mechanisms by which plants respond to these stresses. The chapter concludes with a perspective on how the plant’s innate stress response machinery can be exploited for achieving higher tolerance to stress in crop plants.

Abstract

Contamination of environment with heavy metals has become a serious global problem due to its threat to animal and human health. Removal of this non-biodegradable, hazardous heavy metals through bio-materials has received paramount interest and intense attention in the last few decades as bio-materials play crucial role in remediating heavy metal polluted environment through a process called “biosorption”. The term biosorption, therefore, has become a popular theme in recent years due to its relatively simple, inexpensive, eco-friendly with rapid mechanism of removing heavy metals from polluted environment. There have been burgeoning studies around the globe for alleviating the problem of heavy metal pollution by selecting and developing an effective bio-sorbent with minimum treatment process for field application. This review aims to provide vast information on types of biosorbent available, their exploitation for better efficiency and their economic attractiveness for the restoration of heavy metal polluted environment.

Abstract

Now a days, the public has become more sensitive towards the protection of the environment and general awareness has increased about the adverse effects of industrial effluents contaminate with various pollutants, including dyes on the environment. Dyes are an important class of synthetic organic compounds used in many industries, especially textiles. Consequently, they have become common industrial environmental pollutants during their synthesis and later during fiber dyeing. Textile industries are facing a challenge in the field of quality and productivity due to the globalization of the world market. The dyes, which are widely used in textile industries when left in water bodies without any treatment cause environmental pollution and in turn are toxic, carcinogenic and mutagenic. The efficient treatment of the sludge from the industries is not economical and a challenging task. Currently, a number of different technologies and methods such as biological, physical and chemical are widely used for the removal of dyes. The treatment technologies for the removal of textile dyes from the textile wastewater found that over the past two decades interestingly focused on biodegradation methods such as microbial decolourization, enzymatic decolourization, adsorption by microbial biomass (living or dead) and bioremediation systems as a better alternative as the available physico-chemical methods.

The greenhouse effect is thought to be due to the absorption of solar infrared (IR) radiation by gases and the earth’s surfaces, which, as a result, is heated and then reemit IR radiation at low frequency with a high absorptive power. In fact greenhouse gases in the atmosphere are essential for maintaining life on earth, as without them the planet would be permanently frozen because all of the incoming heat from the sun would be radiated back into space by the earth’s surface (Moss, 1993). The threshold concentration of these gases at which their greenhouse effect would be minimized is not known, but it is accepted that their concentrations in the atmosphere should not be allowed to continue to rise. In recent years, there has been an increase in public concern over environmental damage originating from animal feeding operations.

16.1 What is Sustainable Development?

Sustainable development (SD) is a pattern of resource use that aims to meet human needs while preserving the environment so that these needs can be met not only in the present, but also for generations to come (sometimes taught as ELF-Environment, Local people, Future). The term was first  coined by the Brundtland Commission and defined sustainable development as “development that meets the needs of the present without compromising the ability of future generations to meet their own needs” (UN, 1987; Smith and Rees, 1998)

24. IGNEOUS ROCKS

Introduction : Petros = rocks and logos = science

Petrology means the science of rocks. It deals with the mode of occurrence composition, classification and origin of rocks and their relation to geological processes and history of the earth.

Rocks can be studies in two ways : The study of rocks as specimens in the laboratory is called Petrography which places emphasis on the purely descriptive part from textural mineralogical and chemical point of view. Petrogenesis deals with the origin and processes of formation of rocks. Petrology is a broader term which includes both petrography and petrogenesis.

Igneous rocks are formed by cooling and solidification of magma, either underneath the earth’s surface or above the earth’s surface.

The Coconut palm, also known as the Cocos Nucifera L., is one of the most fascinating and beautiful palms in the world. Epigraphical, literary and sculptural evidence provide proof that coconut has served humanity for more than three millennia. The palm is looked upon with reverence and affection and is referred to by such eulogistic epithets as “Kalpavriksha”, tree of heaven, the tree of abundance, nature’s super market, king of palms and the tree of life. The coconut is believed to have originated in Southeast Asia (Indonesia, Malaysia, Philippines) or Micronesia (Harries, 1977; Purseglove, 1968 and 1972). Coconut has been cultivated in India since ages and plays an important role in social, economic and cultural activities of the people. The palm is amenable to both plantation and homestead management and it can be either a major crop or a minor one in a homestead garden of mixed crops. While responding favourably to scientific management, the palm also tolerates negligent farming to a certain extent. Thus, it can adapt to the divergent farming situations and management practices that are prevalent in different agro-climatic regions. The coconut palm is usually found near the sea on sandy beaches where it can tolerate salt spray and brackish soils. It is also grown under different soil types such as loamy, laterite, coastal sandy, alluvial, clayey and reclaimed soils of the marshy low lands. The ideal soil conditions for better growth and performance of the palm are proper drainage, good water-holding capacity, and presence of water table within three metres and absence of rock or any hard substratum within two meters of the surface. The coconut palm can also grow well inland, within altitudinal limit of 600 m to 1752 m in the Tropics. It requires an equatorial climate with high humidity. A year-round warm and humid climate favours the growth of coconut. The ideal mean annual temperature, which can be tolerated by coconut palm, is around 27ºC with 5–7ºC diurnal variation. The palm does not withstand prolonged spells of extreme weather/climate variations under rainfed conditions. A well-distributed rainfall of 1300–2300 mm per annum is preferred. It is known as a coastal tree since it is grown along the Coasts and Islands and does not tolerate high temperature range, that is the difference between the maximum and minimum temperatures.