eChapters

Introduction

India’s textile sector is one of the oldest industries in the Indian economy, dating back several centuries. The industry is highly varied, with hand-spun and hand woven textiles sectors at one end of the spectrum and the capital-intensive sophisticated mill sector at the other. The fundamental strength of the textile industry in India is its strong production base of a wide range of fiber/yarns, from natural fibers like cotton, jute, silk, and wool, to synthetic/man-made fibers like polyester, viscose, nylon, and acrylic.

Introduction

Energy conservation is the practice of using less energy to lower costs and reduce environmental impact.

A majority percentage of energy used in buildings is still from non - renewable and fossil fuel resources. Lighting and Appliances are affecting energy demand in domestic sector.

Reasons for increased energy demand

• Increase in electrical appliance ownership

• Increasing income level and reliable access

• Rise of Lighting and appliance loads

Introduction

We have now started to feel the impacts of climate change, as a threat to our health, directly as heat stress on our bodies, and indirectly as it damages crops, and causes storms, floods and wildfires (IPCC, 2022). People working in fields or factories, or in the open, suffer the most. Buildings are our first defense as we learn to adapt to these changes. Resilient buildings that provide passive cooling can protect us better from heat waves, buildings designed to withstand storms and f loods can provide better shelter, and net-zero buildings that produce and store their own energy can enable critical operations when the electric grid is down.

8.1 Recommendations

The specific recommendation for NAZ in promoting CA are

• Since fragmentation has come out as a barrier to CA, the community based CA entrepreneurship will be more successful to make CA ecologically resilient, economically viable and socially adoptable.
• Crop residues are viable source for soil nutrients including organic carbon replenishment, but unfortunately left over crop residues are either burnt out or wrongly used. So, a community bank on crop residues in the form of bio-parks on a commercial basis can be a dependable source of organic manure for being blended into the farm soil. Auditing on volume of disposable CR and its proper application can help in making operating farm more resilient and productive.
• Since CA farmers have to go through a minimum gestation period and they are expected to contribute to the ecological resilience and carbon sequestration, economic incentives must be extended for their productive as well as stewardship function. A policy promulgation is the need of the hour to support their contribution
• Since fragmentation of holding poses a potential threat to resource energy biodiversity and economic conservation, so a strong land and farm policy needs to be there to abate disintegration and fragmentation of holding

Since the Green Revolution of 1960s, Indian agriculture have been highly dependent on chemical fertilizers, exploitation of ground water for irrigation, intensive tillage etc. to raise the food grain production of the country towards ensuring food security for all. The consequences of these practices resulted in declined and degraded soil health, soil erosion and dried up water capillaries - ultimately posing threat to the sustainability of the future production. This invites the need of affordable changes in the agricultural practices without hampering the production. Conservation Agriculture, as put forward by FAO, is a set of sustainable agricultural practices, aims to conserve, improve and make efficient use of natural resources through management of soil, water and biological resources in aid with external inputs. The three basic principles of Conservation Agriculture include - minimum soil disturbances, permanent soil cover and crop rotation or crop diversification.

Table 1: Descriptive statistics of the socio-economic and communication characteristics of the respondents in terms of Range (Minimum and Maximum), Mean, Standard Deviation (SD) and Coefficient of Variation (CV) of Alluvial Zone in West Bengal

Table 1 Represents the distribution of variables in terms of range i.e. maximum and minimum values, mean, standard deviation and coefficient of variation for alluvial zone of West Bengal.

It has been found that for the independent variable age (x₁), the range lies between 82 and 27 years, where the oldest respondent is of 82 years and the youngest respondent being 27years old. The mean value of the age of the respondents in this study was found to be 51.49 years with a standard deviation of 12.42 in the dataset. Coefficient of variation for this variable was found to be 24.14 per cent, which indicates a high level of consistency in the distribution.

Research methodology is a detailed plan of investigation and the blue print of procedure for carrying out the research. In this chapter, discussion on the methodology has been made to understand the concepts, methods and techniques, which are utilized to design the study, collect information, analyzing data and interpreting the findings for revelation of truth and formulation of theories. The entire chapter has been broken up under following sub-heads for easy understanding:

1. Locale of research
2. Sampling design
3. Pilot study
4. Variables and their measurements

4.1 Research Setting

In any social science research, it is hardly possible to conceptualize and perceive the data and interpret the data more accurately until and unless a clear understanding of the characteristics in the area and attitude or the behavior of people is at commend of the interpreter who intends to unveil an understanding of the implication and behavioral complexes of the individual who live in the area under reference and form a representative part of the larger community. The socio-demographic background of the local people in a rural setting has been critically administered in this section. A research setting is a surrounding in which input and elements of research are contextually imbibed, interactive and mutually contributive to the system performance. Research setting is immensely important in the sense because it is characterizing and influencing the interplays of different factors and components.

The last century has witnessed a global change in agricultural practices. From high dependency on external input agriculture, the world is now shifting towards low external input sustainable agriculture (LEISA). The history of dustbowl devastation in 1930s in America has put agricultural practices, tillage in particular, to question (Friedrich et al., 2012). Traditionally, tillage was believed to be a primary farm operation for preparing a good seedbed, nutrient mobilization, weed management, moisture availability, crop residue incorporation (Hobbs et al., 2008), thereby improving the overall soil health with increased production (Farooq et al., 2011a). The dust bowl devastation of 1930s gave rise to the concept of protecting soil by reducing tillage operation and maintaining ground cover, popularized as conservation tillage (Friedrich et al., 2012). Economic and ecological sufferings caused by the disastrous droughts in USA during 1930s drove the shift towards conservation agriculture (CA) (Haggblade and Tembo, 2003).

This chapter describes about the review of relevant researches related to the present study. This also helps in developing conceptual framework and selecting proper methodology for the study. Although studies have been conducted on different aspects of conservation agriculture in past, but a few reviews were available on social ecology and perceptional change of the farmers in managing critical inputs to agriculture like water, nutrient and soil organic carbon, and ecosystem as a whole. So, reviews having a little indirect bearings are also included in this section. In accordance with the subject of the proposed study, the review of literature has been presented under the following sub-heads:

1.1 Background

The aftermath of Green Revolution has contributed to both coercions and pollution, albeit, it saved human civilization from hunger, malnutrition and impoverishment. The beginning of GR era, with the prevailing objective and condition, has got less but few choices to go for intensive cultivation that invited chemical fertilizer, assured irrigation and farm mechanizations to make the 'magic gene' revolutionizing the production, productivity and livelihood security in agriculture as well.

The welcome of exotic genes into Indian agriculture has also triggered the silent oftraditional cultivars. Nevertheless, the quantum jump of an agriculture with a production of 55 million tons to 120 million tons during 70s, has contributed to make India self-reliant in food and we have been able to earn a new esteem in the global geo-political scenario by throwing away the 'begging bowl' called PL480.

Definition of Disaster

A disaster can be defined as a sudden or catastrophic event that causes significant damage, destruction, and disruption to human life, property, or the environment. Disasters can be natural, such as earthquakes, hurricanes, floods, wildfires, or they can be human-made, including industrial accidents, terrorist attacks, or technological failures.

Disasters often result in the loss of lives, injuries, displacement of people, infrastructure damage, and the interruption of essential services like electricity, water, and communication systems. They can have long-lasting impacts on communities, economies, and the environment.

Governments, organizations, and communities implement disaster preparedness, response, and recovery strategies to mitigate the effects of disasters, protect lives and property, and facilitate the rebuilding and restoration of affected areas.

Remote sensing can be a useful tool in engineering geological investigations, particularly in the identification and characterization of geological features and hazards.

Some of the ways that remote sensing can be used in engineering geological investigations include:

Geological mapping: Remote sensing data can be used to create detailed maps of the geological features in an area, including rock formations, faults, and folds. This information can be used to identify potential hazards, such as landslides and rockfalls, and to plan engineering projects accordingly.

Landslide detection and monitoring: Remote sensing data, such as satellite imagery, can be used to detect landslides and monitor their movement over time. This information can help engineers to design and implement appropriate stabilization measures.

Ground deformation monitoring: Remote sensing techniques, such as Interferometric Synthetic Aperture Radar (InSAR), can be used to detect ground deformation caused by geological processes such as subsidence, uplift, and faulting. This information can be used to identify potential hazards and plan engineering projects accordingly.

Remote Sensing in Oil Exploration

Remote sensing plays a significant role in the oil exploration industry. It refers to the use of sensors and instruments to gather information about the Earth's surface and its environment from a distance. This information can be used to locate and evaluate oil and gas deposits.

There are different remote sensing techniques used in oil exploration, including

Seismic surveys: This technique involves creating sound waves underground and recording their reflection to determine the subsurface structure. It is commonly used in oil exploration to locate potential oil and gas deposits.

Magnetic surveys: This technique uses a magnetometer to measure the magnetic field of the Earth's surface. Magnetic anomalies can indicate the presence of underground geological structures that may contain oil or gas deposits.

Gravity surveys: This technique involves measuring variations in the Earth's gravitational field, which can indicate the presence of underground geological structures.

Remote Sensing in Mineral Exploration

Remote sensing is a powerful tool used in mineral exploration to study and identify minerals and mineral deposits from a distance. This technology allows geologists to gather information about the Earth's surface and subsurface without having to physically access the site. Here are some ways remote sensing is used in mineral exploration:

Mapping Geology: Remote sensing can be used to map geology by identifying surface features associated with mineral deposits. Geologists use images collected by remote sensing satellites and aircraft to create detailed maps of the geology and topography of a region. These maps can help identify areas that are likely to contain mineral deposits.

Mineral Identification: Remote sensing can help identify specific minerals by analyzing the reflectance or absorption patterns of light. Different minerals have unique spectral signatures that can be detected by remote sensing instruments. By analyzing these signatures, geologists can identify the type and abundance of minerals present in an area.

Geomorphological mapping is the process of creating detailed maps that illustrate the physical features of the Earth's surface, including landforms, soil types, vegetation, and water resources. These maps can be used to better understand the underlying geology and topography of a region, and can be used for a variety of purposes, such as land-use planning, environmental management, and geological hazard assessment.

Geomorphological maps are typically created using a combination of field observations, aerial photography, and remote sensing data. Field observations involve physically visiting a site and making detailed observations of the landforms, soil types, and vegetation. Aerial photography involves taking high-resolution photographs of the Earth's surface from an airplane or satellite, which can be used to create detailed maps of the area. Remote sensing data can also be used to create geomorphological maps, including data from satellites, radar, and LiDAR (Light Detection and Ranging) systems. These technologies allow scientists to gather data about the Earth's surface without physically visiting the site, and can provide highly accurate information about the topography, geology, and vegetation of an area. The resulting maps can be used for a variety of purposes, including land-use planning, natural resource management, and hazard assessment. For example, geomorphological maps can be used to identify areas of high risk for landslides, floods, or earthquakes, and can be used to develop strategies for managing these hazards.

Rock

A rock is a solid, naturally occurring substance composed of minerals or mineraloids. It is typically formed through geological processes, such as cooling and solidification of molten lava or magma, or by the deposition and compaction of sediment over time. Rocks are classified into three main types based on their origin: igneous, sedimentary, and metamorphic.

Igneous rocks: Formed from the cooling and solidification of molten lava or magma. Examples include granite, basalt, and obsidian.

Sedimentary rocks: Formed from the accumulation and compaction of sediment, such as sand, mud, or organic matter, over long periods. Examples include sandstone, limestone, and shale.

Metamorphic rocks: Formed from the transformation of existing rocks under high temperature and pressure conditions. They undergo changes in mineral composition, texture, and structure. Examples include marble, slate, and gneiss.

Rocks serve as the building blocks of the Earth's crust and are an essential part of the geological processes that shape the planet. They can provide valuable information about Earth's history, including the formation of mountains, the movement of continents, and the presence of ancient life forms. Rocks are also used in various practical applications, such as construction, road building, and the production of minerals and resources.

Structural landforms are landforms that are created due to the underlying geological structures of the earth's crust. These structures can include folds, faults, and other features that have been formed due to the tectonic forces that have shaped the earth's surface over millions of years.

Examples of structural landforms include mountain ranges, plateaus, and rift valleys. Mountain ranges are formed due to the upliftment of the earth's crust along a fault line or due to the folding of the earth's crust. Plateaus are flat-topped landforms that are formed due to the upliftment of a large area of the earth's crust. Rift valleys are formed due to the stretching and pulling apart of the earth's crust along a fault line.

Denudational landforms, on the other hand, are landforms that are created due to the process of erosion and weathering. These landforms are formed due to the gradual wearing down of the earth's surface by natural forces such as wind, water, and ice.

Interpretation of Drainage Patterns Through Aerial Photographs

Aerial photographs can provide a useful tool for interpreting the drainage patterns of a landscape. Drainage patterns are formed by the natural movement of water across the land and the way in which it flows from high to low areas, creating channels and streams that eventually converge into larger rivers and bodies of water. Different types of drainage patterns can be identified through aerial photographs, which can help to understand the underlying geology and topography of the landscape.

Here are some of the different drainage patterns that can be identified through aerial photographs:

1. Dendritic pattern

This pattern resembles the branches of a tree and is the most common type of drainage pattern. It occurs in areas where the underlying rock or soil is uniform and has no preferred direction of erosion. The streams converge into larger rivers, which may flow in a particular direction.

India is a geologically diverse country with a wide variety of rock types. The major rock types found in India can be broadly classified into the following categories:

Igneous Rocks: These rocks are formed from the solidification of molten magma. They can be further divided into two types:

1. Plutonic (Intrusive) Igneous Rocks: Examples include granite, diorite, and gabbro. These rocks are formed deep within the Earth's crust and have a coarse-grained texture.
2. Volcanic (Extrusive) Igneous Rocks: Examples include basalt, andesite, and rhyolite. These rocks are formed on the Earth's surface from volcanic eruptions and have a fine-grained texture.

Sedimentary Rocks: These rocks are formed by the deposition and consolidation of sediments over time. They can be further divided into various types based on their composition and mode of formation:

1. Clastic Sedimentary Rocks: Examples include sandstone, shale, and conglomerate. These rocks are formed from the accumulation and lithification of fragments of pre-existing rocks.
2. Chemical Sedimentary Rocks: Examples include limestone, dolomite, and rock salt. These rocks are formed from the precipitation of minerals from water bodies.

Lithological interpretation of igneous rocks involves the identification and description of the different types of rocks that form as a result of the cooling and solidification of magma or lava. Igneous rocks can be classified based on their mineral composition, texture, and the way they formed. Here are some of the common types of igneous rocks and their characteristics:

1. Basalt

Basalt is a dark-colored, fine-grained rock that forms from the rapid cooling of lava. It is typically composed of minerals such as pyroxene, plagioclase feldspar, and olivine.

Basalt is a common extrusive igneous rock formed from the rapid cooling of basaltic lava. It is typically dark in color, ranging from black to dark gray, and has a fine-grained texture. Basalt is composed mainly of plagioclase and pyroxene minerals, with smaller amounts of olivine, magnetite, and other minerals.

Basalt is found in many parts of the world, including the oceanic crust, volcanic islands, and some continental regions. It is also used as a construction material, such as in road paving, because of its durability and resistance to weathering. Additionally, basalt fiber is used in various applications, including reinforcing materials in composites, insulation, and other industrial uses.

Basalt in India: Basalt is a type of igneous rock that is commonly found in India. It is a dark-colored, fine-grained rock that is rich in iron and magnesium minerals.

Traditionally, remote sensing encompasses a wide array of technologies and methods used to gather information about objects, areas, or phenomena without direct physical contact. This includes devices like seismographs, fathometers, radar systems, and more. These tools enable us to observe and measure various aspects of the environment from a distance.

However, in contemporary contexts, when we talk about remote sensing in a more specialized sense, we often refer to the use of satellite and aerial-based systems to capture and analyze electromagnetic radiation reflected or emitted from the Earth's surface. This form of remote sensing has become incredibly valuable in fields such as environmental monitoring, urban planning, agriculture, forestry, and disaster management, among others.

Modern remote sensing techniques leverage sensors capable of detecting specific wavelengths of electromagnetic radiation, such as visible light, infrared, and microwave radiation. By analyzing the patterns and intensity of this radiation, researchers can derive valuable information about the Earth's surface features, including vegetation cover, soil moisture, land use, and changes over time.

Introduction

The issue of environmental protection has become increasingly important in recent years, and one of the most effective ways to address this problem is through the use of recycled products. Recycling helps to conserve natural resources, reduce waste, prevent pollution, and combat climate change making it a critical part of any sustainable development strategy. In this chapter, we can explore how recycled products can help protect the environment and the many benefits that come with their use.

Introduction

Energy Consumption is considered as the energy used to do any task in any kind of a simple domestic building to a complicated manufacturing industry. For instance, in a household, energy is consumed in the form of electricity used to run an Air Conditioner to make a room cool, gas used to cook a dish etc. In a car industry, energy is consumed in the form of electricity to manufacture a car part. In the transport sector, petrol or diesel or gasoline is used as a run a car or bike or other vehicles.

Introduction

Global warming needs a shift to automobile solutions that reduces/ do not produce greenhouse gas emissions. Automobile related pollution is the major source for reduction in air quality in Indian cities. India need to reduce dependency on a fossil- fuel and reduced transportation related emissions. People living in some of the Indian cities are being affected by noise pollution and electric vehicles may contribute to a reduction in noise pollution levels in the cities. Energy efficiency and emissions are two important contributing factors in transportation across the globe.

The primitive people were living as part of the environment along with other f lora and fauna in a perfect synchrony. Prior to industrialisation the people were living in an environment friendly manner without causing much damage to natural resources. During the time they were making good progress and were building huge structures which are of technical excellence even today. Post industrialisation the whole scenario changed very fast. The population increased many fold, people started making more goods than required to have a market hold to earn more – the human greed increased beyond limit.

Introduction

The deterioration of interior air quality brought on by dangerous chemicals and other factors is known as indoor air pollution, which can be up to 10 times worse than outside air pollution. This is due to the fact that confined spaces foster the buildup of potential pollutants more than do open spaces. In underdeveloped countries, statistics show that indoor air pollution has a far worse effect on health than outside air pollution. Indoor air pollution can be defined as ‘ the totality of attributes of indoor air that affects a person’s health and well-being’ ( Singh & Jamal, 2012). Indoor air pollution from solid fuels was to blame for 3.5 million fatalities, 16% of particulate matter pollution, and 4.5% of global daily-adjusted life years in 2010. (DALY).

Introduction

Painting is the practice of applying paint, pigment, colour or other medium to a solid surface (support base), Abdellatif MD, 2017. The medium is commonly applied to the base with a brush, but other implements, such as knives, sponges, and airbrushes, can be used. Interior wall painting is a repetitive, exhausting and hazardous process. In almost all the developing countries, the increasing population stimulates the construction-related activities such as interior finishing and painting. Painting is classically done by humans and generally requires exhaustive physical efforts and involves exposure to dangerous chemicals.

Introduction

The COVID-19, the Global Pandemic has affected the world and is still continuing with its various mutations even today. This has created a long-lasting impact and many sectors like energy, transport, industries, and residential buildings, have critically experienced impacts from the pandemic (Qarnain, Muthuvel, and Bathrinath 2020). It has directly and indirectly impacted every household’s operations. The mandatory COVID – 19 protocols, lockdowns, Work From Home (WFH) schedules and the major fear of every one of contracting the disease if going out itself has forced people to stay indoors and forced residents to use more energy for their daily routine activities, (routines like watching more TV, using environment control devices like fans, AC, room heaters etc.) giving rise to higher energy usage resulting in high energy bills and subsequent scarcity in the energy supply.

11.1 General

The world is currently facing a critical turning point in its pursuit of sustainable energy solutions. With the global population growing and concerns about climate change increasing, it is crucial to move away from finite fossil fuels and towards renewable alternatives. One promising contender in this field is biodiesel, which has the potential to power our future while also reducing environmental impacts. At the heart of biodiesel production lies the complex process of oil-based biomass processing. This involves extracting valuable oils from various sources and using them to create renewable and eco friendly fuel. Oil-based biomass processing is a dynamic intersection where innovation meets necessity, combining chemistry, engineering, sustainability, and environmental consciousness. It is an intricate and multifaceted endeavor requiring careful attention to detail and a collaborative effort to succeed.

Transforming organic materials, such as agricultural residues, food waste, or biomass, into valuable bio-based products is crucial for waste management. This process, called biochemical conversion, employs various enzymatic, microbial, or chemical reactions to break down complex organic compounds into simpler molecules like sugars, fatty acids, and amino acids. These intermediates can then be further processed into biofuels, pharmaceuticals, and other bio-derived materials, making this process promising for sustainable energy and resource management. Biochemical conversion typically includes pretreatment, enzymatic hydrolysis, fermentation, and purification. It offers a sustainable alternative to conventional fossil fuel-based production methods, reducing environmental impacts and dependence on non-renewable resources.

9.1 Introduction

Biomass conversion is a transformative process that harnesses the energy and chemical potential of organic materials derived from living organisms. It encompasses various methods of converting biomass, including agricultural residues, forestry by-products, algae, and even waste materials, into valuable products such as biofuels, chemicals, and energy. This process is a cornerstone of sustainable resource utilization and plays a critical role in addressing environmental concerns, reducing reliance on fossil fuels, and promoting a circular economy. Biomass conversion methods range from biochemical processes like fermentation and anaerobic digestion to thermochemical processes such as combustion, pyrolysis, gasification, and liquefaction. Each method employs distinct conditions, catalysts, and technologies to break down complex biomass structures and convert them into desired products.

8.1 General

Pyrolysis is a process that utilizes heat or fire to separate biomass, derived from the ancient Greek words “pyro” meaning fire, and “lysis” meaning separation. A thermochemical conversion process transforms biomass into a useful intermediate liquid product. This product can then be converted into a hydrocarbon biofuel, oxygenated fuel additive, or a petrochemical substitute. Pyrolysis shares similarities with other thermochemical processes such as cracking, carbonization, torrefaction, destructive distillation, dry distillation, and thermolysis. However, it is not related to gasification, which involves chemical reactions with a gasification medium.

Gasification is a process that turns materials containing carbon, like wood, crops, coal, or waste, into a type of fuel called producer gas or syngas. This is done by heating the carbon-rich material with a controlled amount of oxygen at high temperatures. Gasification is a type of partial oxidation, which means using less oxygen than needed to burn the same amount of fuel. Knowing the necessary amount of air for the conversion process is important to run a gasifier correctly. This requires understanding the stoichiometry based on the composition of the biomass. A chemical formula for the biomass can be calculated by analyzing the elements present, which serves as the basis for estimating the air-fuel ratios through stoichiometric calculations. Gasification only uses 25 to 40% of the theoretical oxidant, producing heat for fuel conversion. In gasification, the main combustible products are carbon monoxide and hydrogen.

The utilization of biomass presents a promising avenue for addressing the challenges of resource scarcity, waste management, and environmental sustainability. This book chapter delves into the multifaceted applications of biomass, with a particular focus on the processing of straw, a versatile agricultural residue. From providing essential bedding material for animals and enhancing agricultural practices to playing a pivotal role in horticulture, cushioning, mulching, and composting, this chapter examines the diverse roles that processed straw assumes. Furthermore, it explores its significance in paper and cardboard manufacturing and its emergence as a renewable fuel source, underscoring how thoughtful biomass utilization paves the way toward a more environmentally conscious and resilient future.

5.1 Introduction

The densification of biomass involves transforming loose and low-density organic materials, such as wood residues, agricultural waste, and plant-based materials, into compact and energy-dense forms. This process is necessary because natural biomass can be challenging to handle, transport, and store. Densification uses mechanical, thermal, or chemical processes to increase the material’s density and energy characteristics. The resulting products, such as pellets, briquettes, or cubes, offer several advantages, including higher energy content per unit volume, efficient storage and transportation, reduced moisture content, and improved combustion efficiency. These products are utilized in various industries, including energy production, residential heating, waste management, and industrial applications. Biomass densification promotes sustainable practices by effectively utilizing biomass resources, reducing waste, and promoting the use of renewable energy sources while mitigating environmental impacts.

4.1 Introduction

Baling biomass is a crucial technique in efficiently managing and utilizing agricultural crop residue. This chapter explores the process of baling, which involves compacting biomass materials into standardized bundles for easier handling, storage, and transportation. From agricultural residues to forestry waste, the chapter delves into various types of biomass suitable for baling, the equipment used, and the benefits of this technique. It also discusses the environmental impact, economic considerations, and emerging trends in baling methods. Through in-depth analysis and practical insights, this chapter offers a comprehensive understanding of how baling contributes to sustainable biomass management and resource optimization.

3.1 Overview

3.1.1 Rice straw: What is it?

When harvesting paddy rice, rice straw is produced as a by-product. Approximately 0.7-1.4 kilograms of rice straw can be obtained for each kilogram of milled rice, depending on the variety, moisture content during harvest, and cutting length of the remaining plant stems. The rice straw is separated from the grains after the plants are threshed manually using stationary threshers or with modern combine harvesters, as shown in Figure 3.1.

Rice straw is a type of lignocellulosic biomass comprising cellulose, hemicelluloses, and lignin. Figure 3.2 illustrates that pretreatment can be used to separate these components. Unlike lignin, which is found in the cell wall, cellulose and hemicellulose are organic fibers.

Biomass, a diverse and renewable resource, holds immense potential as a source of energy, feedstock, and environmental solutions. However, effectively harnessing its benefits necessitates a systematic approach. This chapter introduces the concept of Biomass Management Techniques as a pivotal framework for optimizing the utilization of biomass resources. With a focus on sustainable practices, this chapter delves into various techniques to handle, process, and utilize biomass efficiently. From collection and transportation to storage, conversion, and beyond, Biomass Management Techniques encompass a wide array of methods that ensure the seamless integration of biomass into energy generation, industrial processes, and environmental conservation.

1.1 An overview of biomass

Biomass is an abundant and renewable energy source that has the potential to meet the growing need for clean and sustainable energy solutions. This chapter provides an overview of biomass, its potential, and conversion technologies, which include various techniques for transforming biomass into useful forms of energy such as heat, electricity, and biofuels.

Biomass is an organic substance that can be obtained from agricultural crop waste, forest waste, animals, and microorganisms. It can be used as an energy source or a primary material in various applications. The energy in biomass is derived from photosynthesis, in which plants convert sunlight, carbon dioxide, and water into organic matter.

The capacity of soil to function as a vital living system, within ecosystem and land use boundaries, to sustain plant and animal production, maintain or 

enhance water and air quality, and promote plant and animal health (Doran and

Zeiss, 2000). A healthy soil may function is as follows:

• Sustain biological activity, diversity, and productivity

• Regulate, store of nutrients and cycle water and, decompose organic

matter

• Filtering and buffering, degrading, mineralizing, immobilizing, and

detoxifying organic and inorganic materials

• Inactivate toxic compounds, suppress pathogens, protect water quality,

and enhance catchment soil health.

Introduction

Climate change is threatening food security globally. Countries like India are more vulnerable in view of the tropical monsoon climate and poor coping capacity of the small and marginal farmers. Several agricultural practices like indiscriminate use of agro-chemicals and crop residue burning contribute to emission of greenhouse gasses leading to warming of the atmosphere. Sequestration of carbon both in the vegetation and soil is the most effective means of mitigating GHG emissions. There are several strategies of soil carbon sequestration which can be adopted at farm level. These include: conservation agriculture, biomass recycling, crop rotations and use of organic amendments. One of the recent developments is the conversion of crop residue biomass into biochar and using the char as a soil amendment rather than directly using the crop residues. Several studies show that biochar has a long life in soil and is more effective in sequestering carbon besides improving other soil properties like water holding capacity and nutrient availability. In Indian conditions, there is an immense scope for converting millions of tonnes of crop residues which are not used as fodder into biochar and use the same for enriching soil carbon.

Introduction

Productivity has increased as a result of the significant industrialization that has occurred in India during the past 40 years. However, it has also had detrimental effects on the ecology, particularly in India where soil contamination is progressively becoming more severe. In addition to the effects of man and land use, soil is constantly adapting changes in environmental conditions. A characteristic of soil pollution is the decrease in soil productivity brought on by the presence of soil pollutants. Some changes in the soil will be temporary and reversible, while others will be permanent. Pollutants in the soil have a negative impact on the physical, chemical, and biological characteristics of the soil and decrease its production. Soil pollution is a result of a variety of factors, including pesticides, fertilizers, organic manure, chemicals, radioactive waste, abandoned food, clothing, leather goods, plastics, paper, bottles, tins, and corpses. Industrial waste contains chemicals including iron, lead, mercury, copper, zinc, cadmium, aluminum, cyanides, acids, and alkalis, among others, which either directly or indirectly enter the soil.

Introduction

Soil organic matter is an indispensible component of soil health management. It plays an important role in improving soil physical, chemical and biological environment. Soil health refers to the capacity of the soil in terms of physical, chemical and biological properties for maintaining ecosystem services. With respect to agricultural lands, soil health implies the capability of the soil towards improving crop growth and yield, while also supporting environmental sustainability. Some important determining properties of soil health maintenance are soil reaction, salinity or alkalinity, soil organic matter, soil texture, soil structure/aggregation, water holding capacity, porosity, internal drainage, and nutrient retention capacity. Simultaneously, the key properties maneuvering soil health are soil aeration, internal drainage, nutrient cycling, susceptibility to erosion etc. Except some of the basic properties (soil texture) and processes (soil erosion), most of the determinant properties and processes are maneuvered by the presence of soil organic matter. A healthy soil must have strong resistance to degradation processes and able to recover following a perturbation because of inherent resilience (Magdoff 2001).

Introduction

Rice straw is produced as a by-product of rice production at harvest. Agricultural Waste Burning (AWB) is a major contributor of air pollution in many countries, particularly in South Asia. Exposure to fine particulate matter less than 2.5 μm (micrometer), also known as PM 2.5, released by AWB can cause premature mortality due to respiratory and cardiovascular diseases (Brauer et al.,2012). Combine Harvesters used on the spring rice crop leave behind stubble and straw on the field (Sidhu et al., 2007). Farmers burn the rice residue while preparing the field for wheat sowing season that follows. Further, migrant labour from neighbouring states of Bihar and Uttar Pradesh has decreased (Sirhindi, 2019), and resulted in an increase in the cost of agricultural labour during the rice harvest season (Sharma,2018). Farmers find it both convenient and economical to burn residue to clear and prepare their fields for the next crop. In 2018, over 20 million metric tons of rice residue was generated in Punjab, of which almost 10 million metric tons was subject to open-air burning (MoA, 2019). The time window between rice harvesting and wheat sowing is just 20 to 30 days towards the conclusion of the Kharif season, which is one of the primary reasons of crop waste burning (Balwinder et al., 2016).

Introduction

Microbial diversity is one of the main factors characterizing natural ecosystems; soil is considered one of the best storehouses of useful microorganisms in the world. Although the role of most of these microorganisms is still unknown, scientific progress is providing a better comprehension of the specific ecological functions of soil microorganisms (Ahmad, I.et al., 2008). Microorganisms in the rhizosphere soil play a key role in maintaining the soil fertility (Yadav et al. 2015), which is key for successful natural crop production to meet the increasing global organic food demand. Soil acts as a reservoir of air, water, and nutrients that is essential for plant growth. Only a few grams of soil contain hundred million to billion microorganisms. Bacteria are the most abundant microbes in soil followed by fungi; however, the actinomycetes are ranges in between bacteria and fungi. Other microbes that are found in smaller numbers are algae, cyanobacteria, protozoa, and nematodes. Soil gives the necessary support for anchorage to plant roots (Yadav et al. 2012; Bhaduri et al. 2015).

Introduction

Ideal plant health and productivity of a cropping system depends on an adequate amount of plant nutrients. Fertility of the soil refers to its capacity to support the production of crops. A productive fertile soil can support optimal plant growth, seed germination to plant maturity by providing adequate soil volume for plant root development, essential plant nutrients to meet the nutritional requirements of the plants, and encourage for the consequent plant structure. These attributes of the soil can be distinguished as inherent or dynamic soil quality indicators.Optimum plant health and productivity of a cropping system depends on an adequate supply of plant nutrients. The quantity of nutrients required by plants varies depending on many interacting factors including:

• Agronomic effects

• Soil properties

• Climatic condition

• Management practices

Nitrogen

Most commonly, complex organic compounds, ammonia, molecular nitrogen, nitrite, and nitrate are the forms of nitrogen found in soils. The physical and chemical conditions of the soil control the majority of the microbiological interconversions that change nitrogen.

Ammonia build-up, ammonia loss by volatilization, denitrification, nitrogen f ixation, and leaching losses of nitrogen are the primary changes that occur in submerged soils. The nutrition of rice is significantly impacted by these changes. Given the favourable circumstances for quick soil transformations and nitrogen loss, it is obvious that rice soils are nitrogen deficient.

Introduction

At a present time, Organic farming has an important priority in different areas due to worldwide in look of the growing need for pure and nutritious agriculture food and keep up the feasible and environmental pollution on long time associated with indiscriminate use of chemical fertilizer. The use of synthetic inputs in crop cultivation is necessary to meet the growing need for agriculture food in world. The natural fertilizers are made containing living or veiled cells or their strains of N2 fixation, P2 O5 solubilization bacteria. The biofertilizers are used for seed cramming, soil or vermicomposting region with the objective of rising quantity of such microbes and further those microbial processes which augment the obtainability of nutrients that can be easily digest by plants. Biofertilizers are playing higher role in increase soil productivity by f ixing atmospheric nitrogen, both, in relationship with plant roots and without it, solubilise and insoluble soil phosphorus and produces many plant growth substances in the soil.