eChapters

Introduction

Statistics generally refers to information about an activity or a process that is expressed in quantitate as well as qualitative traits. The quantitative research process is well structured whereas the qualitative one is fairly unstructured. It depends upon how a piece of information have been collected and analyzed. A good researchers need to have both types of skill. This article highlights about the operational procedure, about methods, procedures and techniques that are used in analysis of climate related data.

Parameter vs Statistic

When a data is collected with survey of all the individuals (like in a census) and analysed for certain values, it is called a parameter. But when, we guess the same value with a random sample and interpret for whole population it is called a statistic. Environmental parameters are: mean, variance, correlation, regression, heritability, repeatability etc. Again, there are two types of variables: quantitative and qualitative. Quantitative variables can take any value in a specified range. So, they are of continuous type. But qualitative variables are very few types ( 2 ,3 or 4 types) and they are of discrete type. Body weight is an example of quantitative variable whereas, comb type is a qualitative variable.

Abstract

A majority of the plants studied in natural ecosystems are symbiotic with microorganisms that either reside entirely (endophytes) or partially within plants. These microorganisms express different associations ranging from mutualism to parasitism. These symbiotic relationships appear to impart tolerance to various types of abiotic stresses such as heat, drought, salinity, heavy metals, etc. and sometimes may be responsible for the survival of both plant hosts and microbial symbionts in high stress habitats. The amelioration of the abiotic stresses by the endophytes assumes increasing significance in the light of rapidly changing global climate, which is likely to face frequent incidences of extreme weather conditions like high temperature, droughts, etc.

Key words : Integrated Watershed Management (IWM), GIS, DTM, Watershed Delination, Water Quality Modeling, RS, DSS, Ground Water Information System (GWIS).

Introduction

The availability of land and water resources has a major effect on the economic and ecological aspects of life everywhere around the world. As a result, the need to develop better tools for efficient land and water resources management has become very vital. For quicker, reliable and precise results, it is necessary to use the geospatial tools and techniques such as Global Positioning Systems (GPS), Geographic Information Systems (GIS) and Remote Sensing (RS) image interpretation and analysis techniques to manage the natural resources. The application of these tools and techniques not only facilitates timely and repetitive analysis of all the topological features, but also assists in development of Decision Support Systems (DSS) to generate alternative scenarios for optimal use of the natural resources in the long term. The optimal use of these resources through integrated management of land water and vegetation leads to enhanced production and productivity of food, fodder, fiber, fuel, fish, flower and forest resources. Moreover, the holistic management of the resources to produce these outputs is plausible and manageable within the watershed systems, which are hydro geological units from which the runoff resulting from precipitation flows past through a single outlet to downstream locations. The systematic management of land, water, vegetation and livestock resources within the watershed systems is termed as Integrated Watershed Management (IWM). Broadly, IWM can be defined as a multidisciplinary, holistic way of protecting and managing a watershed’s natural resources to enhance biomass production in an eco-friendly manner. The watershed is viewed as a hydro-geological complex and dynamic ecosystem in which natural and anthropogenic processes occur and interact resulting in generation of runoff at the watershed outlet.

Abstract

This study was conducted at Directorate of Cashew Research (DCR) Puttur, D.K., Karnataka during 2007-12. In this study, a methodology was standardized to find the area under cashew, barren areas and other areas for expanding cashew cultivation with remote sensing. It was found that the images pertaining to the month of November was best for classifying cashew since the colour of cashew leaves changes during that period. Also, the LISS III images were found to be good for identifying cashew. It was not possible to differentiate between cashew seedling area and cashew graft area using LISS III or LISS IV images. A spatial database of soil moisture was prepared for the irrigation scheduling in cashew and a spatial database of major nutrients was prepared for the site specific nutrient management in cashew gardens. A spatial database of land slope and stream orders was prepared using GIS and suitable soil and water conservation interventions were suggested for the selected area.

Keywords: Cashew, GIS, remote sensing

Introduction

Natural Disasters are inevitable, and Indian subcontinent is prone to all type of Natural Disaster either it is flood, drought, cyclone, earthquakes, tsunami or forest fires etc. Disasters can be classified in several ways. A possible sub-division of disaster is: (i) Natural Disasters; (ii) Human made disasters; (iii) Human induced disasters. Another sub-division is related to the main controlling factors leading to a disaster. These may be meteorological, geomorphological/geological, ecological, technological, global environmental and extra terrestrial. Another useful distinction that can be made between disasters is regarding their duration of impact and the time of forewarning. Some disaster strikes within a short period with devastating outcomes; others have a slow onset period with equally or more serious repercussions. According to the available statistics 60% of the total area of Indian subcontinent is venerable to seismic activity of varying intensities, 16% of the country’s total area is drought prone. In India 68% of total sown area of the country is drought prone. Coastal areas of India is exposed to tropical cyclones, tsunami in recent years and among all the disaster occur in the country, River floods are the most frequent and often the most devastating.

Introduction

Nanotechnology and nanoparticles are increasingly recognized for their potential applications in various aspects of human animal and animal welfare like development of various healthcare or cosmetic products, nano-electronics and techniques for environmental remediation, and many consumer products. Nanoparticles, by definition, are structures that have one dimension in the 1–100 nm range. Nanotechnology involves the application of materials at the nanoscale to new products or processes. Over the past few decades, inorganic nanoparticles, whose structures exhibit significantly novel and improved physical, chemical, and biological properties, phenomena and functionality due to their nanoscale size, have elicited much interest. Nanophasic and nanostructure materials are attracting a great deal of attention because of their potential for achieving specific processes and selectivity, especially in biological and pharmaceutical applications. Nanotechnology has made a new generation industrial revolution by developing product and formulations for medical, agriculture (nano-fertilizers, nano-herbicides, nano-pesticides, recalcitrant contaminants from water, nano-scale carriers, nanosensors), veterinary care, fisheries and aquaculture, detection of nutrient deficiencies, preservation, photocatalysis, nanobarcode, quantum dots etc. It is a rapidly growing industry currently worth billions of U.S. dollars, with many potential benefits to society. Nanotechnology has the environmental applications to protect climate change and environmental pollution as nanocatalyst, light weight nanocomposite materials, nanocoatings, improved renewables and nanosensors.

This fast growing technology is already having a significant commercial impact, which will certainly increase in the future. Because of their widespread application, the commercial nanotechnology industry is predicted to increase significantly to more $3 trillion in few years. While nanotechnologies offer many opportunities for innovation, the use of nanomaterials in food, agriculture and environment has also raised a number of safety, environmental, ethical, policy and regulatory issues.

Introduction

Cultivation of crops in greenhouse or protected structure has been increased tremendously in recent times and also has been spread from temperate regions to the warmer regions of tropics and subtropics. Plentiful technologies have been developed for heating the inside environment of greenhouse for optimum plant growth (Sethi et al. 2013). However, in hot arid areas, cultivation in greenhouse is very difficult as the temperature reaches to a very high level to sustain plant growth (Pek and Hayles 2004, Saran et al. 2010). Under such situation requirement for cooling the greenhouse microclimate environment is the necessity, but is very energy and water intensive. Hence, in such regions, reduction of air temperature inside the greenhouse or the regulation of temperature closer to the ambient temperature during summer is necessary for successful crop production. A typical diurnal variation of temperature and global solar radiation during late winter months inside a shade net structure has been plotted in Fig. 18.1. It has been found that global solar radiation has been decreased to almost 1/3 of the radiation received outside by using 75% shade net cover. The temperature inside structure during morning time has also been found higher than outside temperature and in summer such increase is expected to be much higher.

Therefore, cooling is considered as the basic necessity for greenhouse crop production in tropical and subtropical regions to overcome the problems of high temperatures during summer months. Development of suitable cooling system that provides congenial microclimate for crop growth is a difficult task as the design is closely related to the local environmental conditions. Different cooling techniques for greenhouse crop cultivation may be found in Kumar et al. (2009). Fan pad cooling system has been widely used for greenhouse cultivation however, requires large amount of water during evaporation based cooling. Since water resources are becoming scarce in future such fan-pad cooling system may not be viable in future specifically in hot arid region.

Abstract

Soil Resource Appraisal helps in characterizing the existing land resources, assessing their suitability for various land uses and then helping the user to prepare a rational land use plan suitable for the integrated development of the area. Application of Remote Sensing (RS) and Geographical Information System (GIS) helps not only in the characterization of the resource base, but also in the generation of various thematic maps and preparation of land use and action plans for effective implementation of various developmental plans at farm level.

Keywords : Soil Resource Appraisal, Land Use Plan, Farm level Developmental Plans

1.0 Introduction

A thorough knowledge and understanding of soils is basic to the development and management of agricultural resources. About 100 years ago, man began systematic study of soils in the field and tried to separate, classify and map their geographic distri­bution. Today we have sufficient knowledge about soils; however the characterisation, classification and mapping of soils is still tedious, time consuming and costly affair. Therefore the need for adopting new and more rapid and accurate methods of mapping soils has resulted in the use of satellite images with image interpretation techniques for soil survey and map­ping.

In India for the country as a whole, soil and other land resources information is available at 1:1 M scale, which was generated from the state level mapping done at 1:250,000 scale under the Soil Resources Mapping Project of India during the period from 1986 to 1995. This information is of general nature and useful for planning on a wide canvas and not particularly useful for farm or watershed level planning in the country. For site-specific needs and for developmental works at watershed level, we need detailed farm level database at 1:10,000 scale. Once this type of information is generated at village/watershed level, this will be useful for identifying site specific constraints, generation of area and site specific agro technologies, land-use options based on soil site suitability assessment, wasteland identification, identification of prime farm lands and farm clusters for zoning and Strategic planning, preparation of farm level development plans by line departments and proactive advice and technology transfer to farmers.

ABSTRACT

In Tamilnadu majority of the people are engaged in agricultural work and they mainly depend upon the water resources. But at present both surface and subsurface water has become deficient because of over exploitation. Since last few years, conventional methods were employed to improve the surface and subsurface water conditions. But these methods provide less accurate result and consume more time. So to improve the conditions modern tools, such as remote sensing and GIS are being used to identify the ground water potential zones in Tamilnadu. It provides accurate resulst and consumes less time.

A project was carried out in Gadilam lower sub basin which falls in the part of Cuddalore District, Tamilnadu. The IRS 1D imagery was collected and interpreted using image processing software and Geo media GIS Software in conjunction with collateral data to prepare Hydro geomorphology, land use, geology and lineament maps Field checks were made and transferred the field data on the base map. By application of overlay analysis of the above thematic maps, using GIS techniques, the recharge zones were identified.

The satellite image mosaic map of Gadilam lower sub basin was generated to identify ground water potential zones. Average monthly rainfall data for the past 50 years were collected. Using Remote sensing and GIS techniques, the thematic maps such as Geology, Geomorphology, Soil, Drainage, Land use, Lineament zones have been generated for this study. Geophysical survey was also conducted in various locations and the aquifer parameters were measured. Details related to land and water resources, cropping pattern, water levels and water qualities from PWD ground water division, land use and well censes data of villages from village Administrative Officer, tank details from PWD were collected and analyzed

After analyzing the various thematic maps, they were finally overlaid. Thus the groundwater potential zones of Gadilam lower sub basin was identified.

1.    Introduction    71
2.    Microorganisms in Food Industry    72
    2.1.    Microorganisms as the agents of fermentation in  
        traditional fermented foods, 73
    2.2.    Microorganisms as the source of food, 83
    2.3.    Microorganisms as a source of food supplements, 86

3.    Microorganisms in Pharmaceutical Industry    92

    3.1.    Antimicrobial agents from microorganisms, 92
    3.2.     Microorganisms as probiotics, 97
    3.3.    Microbial enzymes in  pharmaceuticals, 98
    3.4.    Mushroom nutriceuticals, 98

ABSTRACT

The present paper highlights the implication of geochemical strategic tools to choose suitable site selection on the coastal region. Geochemical tools and geomorphological survey have been also deployed to identify the suitable site. The geomorphology of the site A reveals enough fresh water accumulation was found and the two elevated crest and the adjacent trough (low land) with surrounding areas further support the fact. The water quality of this site exposes very good quality (< 200ppm TDS) and the dissolved major anions (HCO3, SO4, Cl) and cations (Ca, Mg, Na, K) concentration are well within drinking water standards. The soil samples are of medium to coarse sand nature showing high porosity (40 to 50%) with mica flakes acting as less permeable in nature. The water quality shows very good in nature and similar to Site A. The soil characters additionally proved good in porosity and permeability (SAR 1.5 to 2.1).

2.1 INTRODUCTION

GIS is a tool that can be used in varied disciplines ranging from civil engineering to business. Remote sensing data is often brought into GIS to have a complete data set in many natural resource application areas. Full capability of GIS is not used widely. Many a times people use GIS only for digitising maps and to do simple query on maps. But it can also be used in modeling, simulation and forecasting, only then one may regard GIS technology is utilised to its full potential. Some GIS softwares handle simple problems for location based services while other complex softwares posses advanced modules to do all types of spatial, network and 3D analysis. Integration of softwares used in natural resources study are being interfaced with GIS to create scenarios.

Remote sensing and GIS technology is useful in the following fields:

The main objective of nanomedicine broadly defined as the comprehensive monitoring, repairing and improvement of all human biological systems, working from the molecular level using engineered devices and nanostructures to achieve medical benefit. Nanomedicine is the nanomachine of diagnosing, treating, and preventing disease and traumatic injury, relieving pain, and of preserving and improving human health, using molecular tools and molecular knowledge of the human body. Nanotechnology applications in medical science can be essential in achieving this goal. These applications involves extensive surveillance, control, creation, repair, and defence of all biological human systems, employing designed nanodevices and nanostructures which works in molecular level.

Mulching

The technique of covering the soil with plastic films or natural crop left over (residues) for soil and water conservations is called mulching.

This technique was practiced by farmers using dry leaves straw, trash, stones etc to conserve water. Presently plastic film have come into use for the purpose of mulching due to inherent advantages.

Abstract

Remote sensing is the art and science of obtaining information about an object or phenomenon without having any contact with the object concerned. Geographical information system is a tool to create, manage, retrieve and query spatial databases. Remote sensing in conjunction with Geographical Information System (GIS) has wide applications in all spheres of life and especially in agriculture. Specifically, this paper reveals some of the applications of remote sensing and GIS in the field of crop condition assessment viz., crop type classification, crop stress detection, crop yield estimation and pest and disease monitoring.

Keywords : Remote Sensing, GIS, Yield Forecasting, Crop Stress, Pest and Disease Monitoring

1.0 Introduction

Remote sensing is the art and science of obtaining information about an object or phenomenon without there being any physical contact. The information is so collected using a device called a sensor. The sensors are mounted on a platform at an advantageous position. Accordingly the remote sensing is called ground based (sensor is hand held or mounted on mast), air borne (sensor is on a balloon or aero plane) or space borne (sensor is mounted on a satellite). The basic principle in remote sensing is that each and every object has unique reflecting property like human thumb impression and when the solar energy is falling on an object a part of it gets reflected, which carries the information about the object. The reflected light is converted in to reflection percentage of incoming solar radiation. This percentage of reflection can be used to work out the vegetation indices which are surrogate measure of crop condition.

Geographical Information System (GIS) is software system which enable Collection of large volume of data with spatial relation Integration of data from different source is possible Analyze such data for our requirement Present the data in different formats (maps, table and reports)

Applications of Remote Sensing

The era of satellite remote sensing was open in the 1960s when cameras and electronic sensors were mounted on spacecraft. Nowadays there is a big assortment of satellite systems actively recording information about the Earth. A wide variety of imagery is available from satellites. Both active and passive sensors, operating from the microwave to the ultraviolet regions of the electromagnetic spectrum collect a large amount of information about the earth’s surface every day. Each of the systems vary in terms of their spatial, spectral, radiometic and temporal resolution. Those characteristics play an important role in defining which applications the sensor is best suited for. The main benefits of satellite remote sensing are the following:

Abstract

Any country’s socio-economic development essentially depends on land and water resources. Resource depletion takes place when there is an overstretching due the exploding population, calling for prudent management of the resources. Application of remote sensing and Geographical Information System (GIS) tools in the management of natural resources at different levels including watersheds is quite well known. In addition, applied geoinformatics are also used in research on management of these delicate resources also besides characterization. There is a continuous advent in technology in both hardware and software necessitating updation of application scientist/manager. Once an exclusive tool of elite institutions and government agencies, GISnow became an indispensible part of our day-to-day life. As the urge for information intensifies, new applications of GIS continue to evolve. A concerted effort is needed to develop an information system when vast expanses of natural resources are to be managed and a combination of information tools like remote sensing, global positioning system and GIS always updates the database effectively. However, the cost factor should not hinder the applications at micro level. This necessity calls for attention to popularize free and open sources of software (FOSS) and data (particularly digital elevation models (DEM) and satellite imagery) to put the techniques into use by enthusiasts at village level such that a database at a regional level can be built through participatory GIS. It is in this direc tion the av ailab le li terat ure on appl ied geoinformatics coupled with use of FOSS is reviewed and presented in this article to give an idea as to how an open ended information system could be developed to help the management.

Keywords: Natural resources, management, Remote sensing, GIS, FOSS, DEM

Introduction

In Indian agriculture, horticulture sector has made considerable progress after independence and as a result, horticulture has emerged as one of the major drivers of growth in the agricultural and allied sector. The horticulture sector includes large number of crops viz., fruits, vegetables, ornamental crops, spices, tuber crops, plantation crops, medicinal and aromatic crops, mushroom and their post harvest management. On the production and productivity front, the horticulture sector outperformed conventional food crops. Between 200405 and 201415, horticultural output achieved an annual growth of about 7 per cent as compared to around 3 per cent growth in food grain production. This increase in production has come from an increase in acreage and even larger increase in productivity. Over the last decade, the area under horticulture grew by about 3% per annum and annual production increased by 5.4%. Thereby, India has maintained its second rank in the global production of fruits and vegetables, next only to China. India’s fruit productivity is better than that of China, though China is the largest fruit producing country.

The country is currently producing 295.2 million tonnes of horticulture produce from an area of 24.9 million hectares, which has surpassed the estimated food grain production of 275.68 million tonnes (201617). Though the production of food grains and horticultural produce are not meaningfully comparable due to fundamental differences in resource requirements, their farming practices, characteristics of produce and most importantly, their nutritional and medicinal properties as well as energy value. The special attention was given to the this sector, especially after the introduction of the Horticulture Mission for North East and Himalayan States (HMNEH) and the National Horticulture Mission (NHM) during 11^th Plan period, owing to bumper fruit production. Given the increasing pressure on land, growth strategies have been focusing on raising productivity through high density plantations, protected cultivation, micro irrigation, quality planting material, rejuvenation of senile orchards and an emphasis on post harvest management and marketing of produce for better price realization.

These three requirements are required to be followed in sequence for getting maximum benefits. However, integrated rural energy concept is a new area of work and not much experience is available in this field as compared to other rural development activities. It is difficult to give any guidelines for planning. One can only recommend approaches and not solutions to planning.

The rural area in developing countries are almost always rich in one or another sources of energy, which could be used separately or in combination with other sources in decentralized small scale units, or even on a household scale. Thus, the problem is one of good planning, management and a strong educational and promotions campaign, rather than the non availability of resources or the lack of technology. Further, after planning, prefect development of device and their effective operation is required.

The purpose of the Integrated Rural Energy Planning project should be clearly defined. It may design either for research and development or demonstration for Popularisation of system, education and training, promotion, health or combination of these.

It is usually better to start with a small size to gain experience and build up confidence before undertaking the large scale project. As defined earlier, one of primary requirement of Integrated Rural Energy Planning is to develop energy demand pattern, energy supply system and optimally match demand with supply.