eChapters

Abstract

Mushroom has a great potential in India. Its production is gradually increasing at the annual rate of 7%. The total mushroom production in India is 1.13 million tones and on the other hand, mushroom production annually in china is 18.2 million tones. There are a no. 07 wild mushroom available in the world and medicinal properties much as anti Candida, anti tumor (including cervical, uterine, stomach cancer) and antis viral are rotally present. Of the entire wild mushroom tested, T. glolulum has the highest amount of protein, ask, Calcium, phosphorus and iron. A total of 172 wild mushrooms have been reported home NE India and majority of the wild mushroom is of the order Agaricales. There is a need to make a concerted study of the mushroom biodiversity and its use for economic activity.

Nutrition is the basis for life to prosper and sustain in the biosphere. There are two modes of nutrition in all species: self-nourishment and crossnourishment. Self-nourishment goes on in the category of organisms known as autotrophs. Cross-nutrition is maintained by the category of consumers categorized as heterotrophs. The autotrophs nourish themselves by utilizing inorganic molecules and energy available in nature, while the heterotrophs derive the nutrients that the autotrophs ‘manufacture’ for themselves. In other words, the heterotrophs derive nutrients from organic molecules. These organic molecules are derived either from the autotrophs directly or from the consumers dependent on autotrophs.

Autotrophs derive energy in its free form (e.g. light) or that available in inorganic molecules (e.g., CO, 

1. Introduction

Cold-Arid areas are unique eco-systems lying in the north-western Himalaya. The Himalayan mountain ranges can broadly be grouped in two categories 1) the Himalayan ranges extending to the south of the main range including the greater Himalaya and 2) the trans-Himalayan ranges to the north of it. The cold-arid areas are situated in the Trans-Himalayan ranges which comprise of the Zanskar Range, the Ladakh Range and the Karakoram Range. The Ladakh region is situated in the rain shadow of the Himalaya and is dry and arid. To its south lie the Himalayan mountains, in west lies the Kashmir, in east lies the Tibet and the northern boundaries are flanked by the Karakoram ranges.

All of nature’s biodiversity is not visible. Biodiversity can also not be studied and/ or understood by looking at and analyzing it with the naked eye. A great proportion of the planet’s biodiversity flourishes in the ecosystems not directly accessible to us and the organisms in the sizes our eyes cannot record. The soil biodiversity is more interesting and more varied than we have understood and appreciated. The biodiversity in the soil - together with the physical environment - constitutes what we can call the pedosphere. Biodiversity in the pedosphere is distinguishable from that of the biodiversity above the soil surface. One is nonplussed by an understanding of some of the unbelievable features and functions of the pedosphere biodiversity.

The Convention on Biodiversity (CBD) held on the occasion of the historical Earth Summit in Rio de Janeiro in 1992 underlined the significance of biodiversity conservation for various tangible and non-tangible benefits as well as one of the key factors for sustainability. However, the conservation of soil biodiversity for realizing sustainability

6.1 Biodiversity

Biodiversity means biological diversity. It measures the variety of the earth’s animal, plant and microbial species; of genetic difference within species and of the ecosystems that support the species in its widest. Biodiversity is virtually synonymous with “life on earth”, this word was coined in 1985. Biodiversity is the degree of variety in nature and not nature itself.

Introduction

Organic farming is basically a holistic management system, which promotes and improves the health of the agro-ecosystem related to biodiversity, nutrient biocycles, soil microbial and biochemical activities. Organic and bio-dynamic farming emphasises management practices involving substantial use of organic manures, green manuring, organic pest management pratices and so on. It has also come to mean that it is a system of farming that prohibits the use of artificial fertilisers and synthetic pesticides.

Biodynamic agriculture is an advanced form of organic farming system that is gaining increasing attention because of its added advantage of soil health and food quality. It is an alternative variant where the chemical fertilisers are totally replaced by microbial (biological) nutrient givers such as bacteria, algae, fungi, mycorhiza, actinomycetes. Biological Pest management of crops is undertaken by employing predators, parasites and other plethora of natural enemies of pests, in addition to all the rest of option that help to avoid resorting to chemical pesticides. These agents could be augmented into farms or promoted through such activities that favour their flourished activities. Composting, Green manuring, crop rotations. Intercropping, mixed cropping etc. as well as bird perches, trap crops promote such biological activities.

Introduction 
In recent years, the global demand for sustainable and renewable energy sources has intensified due to the continuous depletion of fossil fuel reserves, rising fuel prices, and environmental concerns. Bioethanol, a renewable fuel derived from the fermentation of plant biomass, is considered a promising alternative to petroleum-based fuels. Among various feedstocks, tuber crops such as cassava, sweet potato, and potato have gained significant attention due to their high starch content and relatively low competition with food supply in certain regions. Bioethanol production is broadly categorized into four generations based on the type of feedstock and technology involved: First-Generation Bioethanol is derived from food crops such as maize, sugarcane, and tuber crops. Despite its wide application, it has been criticized for contributing to rising food prices (Khairati, 2024). Second-Generation Bioethanol is produced from non-food lignocellulosic biomass like agricultural residues, which reduces the food vs. fuel conflict (Sharma et al., 2020). Third- Generation Bioethanol is derived from algal biomass, offering higher yields and lower competition with land use (Brennan & Owende, 2010). Fourth-Generation Bioethanol combines biomass conversion with carbon capture and storage technologies, providing the highest environmental benefits (Yoon et al., 2012). Further the trend in world ethanol production during the year 20020–2025 is given in Figure 1. Tuber crops such as cassava, sweet potato, and potato are promising feedstocks due to their high starch content and lower food competition in certain regions. Recent studies highlight the efficiency of bioethanol production from these crops: Cassava is considered the most efficient tuber crop for bioethanol production due to its high starch yield and low production cost (Jagatee et al., 2015). Sweet Potato studies report ethanol yields of up to 138.6 g/kg under optimized fermentation conditions using co-fermentation techniques (Dash et al., 2017). Industrial potato waste has been successfully utilized for bioethanol production, with pilotscale experiments yielding up to 68.68% ethanol concentration (Sehsah et al., 2015). Bioethanol production from tuber crops presents several environmental and economic benefits. Life Cycle Assessment studies indicate that bioethanol reduces GHG emissions compared to gasoline, particularly in second-generation production systems (Farahani & Asoodar, 2017). Utilizing agricultural waste

9.1 Introduction

The rapid growth of industrialization and population significantly affect on the demand of ethanol as an alternate fuel. Generally, conventional crops like sugarcane and corn become unable to meet the demand of bioethanol, due to their primary role in food and feed. Therefore, lignocellulosic biomass from agriculture waste is attractive precursor for bioethanol production. Biomass is renewable organic material, abundant and cost effective. Ethanol production from agriculture waste has been projected an economically attractive option for industrial sector. However, sugar and starch derived ethanol have a more theoretical yield as compared to lignocelluloses, theses sources are insufficient for bioethanol production. The major agricultural wastes including rice straw, corn straw, wheat straw and sugarcane bagasse etc. can subsequently used for ethanol production. Rice straw has a highest worldwide potential for bioethanol production (205 giga liter) followed by wheat straw (104 giga liter), corn straw (58.6 giga liter), and finally for sugarcane bagasse (51.3 giga liter)¹.

A bio fuels is environmentally friendly options for power generation. Most of the fossil fuels are biological in nature. These are plant forms that, typically, remove carbon dioxide from the atmosphere and give up the same amount when burnt. The bio fuels are therefore considered to be “CO₂ neutral”, not adding to the carbon dioxide level in the atmosphere. The type of bio fuel used will depend on a number of factor, chief amongst them being the available feedstock and the energy that can be used locally.

India import 70% of the oil it uses, and the country has been hard by the increasing price of oil, uncertainty and environmental hazards that are concerned with the consumption of fossil fuels. In this context, bio fuels constitute a suitable alternative source of energy for India. There are two examples of bio fuels are Ethanol and Bio diesel (Renewable Diesel)

Ethanol can be made from biomass material containing sugar, starches, or cellulose (starch and cellulose are complex from of sugar)

Use of biofertilizers in agriculture and their advantage
 
Bio-fertilizers or bio-inoculants

These are productions containing living organisms such as nitrogen fixers or phosphorus solubilises which are useful for agricultural production. Biofertilizers play a significant role in improving soil fertility and plant growth. By fixing atmospheric nitrogen both in association with plants and without plants solubilize insoluble soil phosphates into soluble phosphates there by increasing the availability of phosphorus secrete growth promoting substances and supplies to the inoculated plants.

Biofertilizers act as complementary and supplementary sources of plant nutrients. Biofertilizers help in increasing the biologically fixed atmospheric nitrogen and enhancing phosphorus availability to the crops. Among the biofertilizers for increasing nitrogen supply, nitrogen fixing bacteria (Rhizobium, Azotobacter and Azospirillum), blue green algae (BGA) and Azolla are important. The availability of phosphorus is improved by phosphorus solublizing microorganisms (PSM) and mycorrhizae (VAM).

Rhizobium is of vital importance to various pulses and some of the oilseeds and fodder legumes as 80–90 per cent of their nitrogen requirement is met through biological nitrogen fixation (BNF). Rhizobium fixes atmospheric nitrogen ranging from 50–60 kg per ha in groundnut, 100–300 kg per ha in alfalfa. In pulses it is estimated at 50–110 kg/per ha. Field studies indicated a yield increase of 14–53 per cent due to Rhizobium inoculation. Nitrogen left over the demand of legumes in combination with the nitrogen present in roots of the legumes will enhance the soil fertility. Consequently the nutrient needs of the subsequent crop from applications will be reduced.

Biogas typically comprises 60-65% methane (CH4), 35-40% carbon dioxide (CO2), and 0.5-1.0% hydrogen sulfide (H2S), along with traces of water vapor. It is approximately 20% lighter than air and has an ignition temperature of 650-750°C. The calorific value of raw biogas is around 20 MJ/m³ (4,713 kcal/m³).
Unlike Liquefied Petroleum Gas (LPG), biogas cannot be converted into a liquid state under normal temperature and pressure. The critical temperature for methane liquefaction is -82.1°C at a pressure of 4.71 MPa, making liquefaction complex and energy-intensive. However, biogas can be upgraded by removing impurities like CO2 and H2S and compressing it into cylinders for use in three-wheelers, cars, pickup vans, or stationary engines at remote locations.
Since Compressed Natural Gas (CNG) technology is already wellestablished, upgraded biogas (also called biomethane) which has similar composition and energy content can serve as a direct substitute for CNG in all its applications. The calorific value of upgraded biogas (with CO2 removed) increases to around 34 MJ/m³, compared to 20 MJ/m³ for raw biogas.
Techniques for Biogas Purification
To enrich biogas and increase its methane content, various purification methods are employed:
1. Water Scrubbing
This physical absorption process involves pressurizing biogas and feeding it into the bottom of a packed column, while water is introduced at the top. The CO2 and H2S dissolve into the water as it flows downward, while methane rises and is collected. The water used can

3.1 Introduction

Nature has a provision for destroying and disposing off wastes and dead plants and animals. This decay or decomposition is carried out by tiny micro-organisms called bacteria. Making of farm-yard manure (FYM) and compost is also through decomposition of organic matter (OM). When a heap of vegetable or animal waste and weeds etc., die or decompose at the bottom of backwater or shallow lagoons, bubbles can be noticed rising to the surface of water. Sometimes these bubbles burn with dancing flame at dusk. This phenomenon has puzzled man for a long time. It was only during the past hundred years that Scientists unlocked this secret as the decomposition process. The gas thus produced was and is still called “Marsh Gas.” The technology of harnessing this gas under artificially created conditions is known as Biogas Technology.

12.1 Introduction

Nature has a provision for destroying and disposing off wastes and dead plants and animals. This decay or decomposition is carried out by tiny micro-organisms called bacteria. Making of farm-yard manure (FYM) and compost is also through decomposition of organic matter (OM). When a heap of vegetable or animal waste and weeds etc., die or decompose at the bottom of backwater or shallow lagoons, bubbles can be noticed rising to the surface of water. Sometimes these bubbles burn with dancing flame at dusk. This phenomenon has puzzled man for a long time. It was only during the past hundred years that Scientists unlocked this secret as the decomposition process. The gas thus produced was and is still called “Marsh Gas.” The technology of harnessing this gas under artificially created conditions is known as Biogas Technology.

8.1 Introduction

Biogas is produced by the anaerobic digestion of biodegradable materials with the help of microorganisms. Biogas is also considered as renewable energy source because of is environment friendly nature. Conversion of cattle dung, kitchen wastes and agricultural wastes into biogas have the potential to minimize the burden on the fossil fuel and reduce the environmental pollution. Majority of developing countries specially their rural and suburban areas faces lack of access to the electricity and cooking gas. Biogas technology is emerging as a sustainable technology for waste treatment which could help to tackle the waste disposal issue in developing countries. 

Abstract

Since the first oil well drilled successfully in 1859, crude oil has been a serious problem around world, including Indonesia. As a source of all petroleum products, crude oil is very complex component and divided into aliphatic, aromatic, resin and asphaltene. Petroleum products have been used for daily life and created large amounts of pollutants in environment and ecosystems around the globe. The pollutants should be treated by certain method; among them, bioremediation has several advantages to resolve the problem. In 2003, Ministry of Environmental (MoE) – Republic Indonesia was endorsed with a new regulation about biological treatment or bioremediation for crude oil contaminated soil (MoE regulation No. 128/2003). The most important to be noted in bioremediation process is the presence of microbes with certain metabolite capabilities. The degradation rate also can be improved and sustained by ensuring the adequate required factors. This article describes the removal of crude oil by utilization of microbial potentials, factors affecting biodegradation, and how they are applied in Indonesia.

The biochemical oxygen demand is a chemical procedure for determining the amount of dissolved oxygen needed by aerobic organisms in a water body to break the organic materials present in the given water sample at certain temperature over a specific period of time. BOD of water or polluted water is the amount of oxygen required for the biological decomposition of dissolved organic matter to occur under standard condition at a standardized time and temperature. Usually, the time is taken as 5 days and the temperature is 20°C. microbes
C6H12O6 + 6O2 ¾¾¾¾®CO2 + H2O
Principle
The test measures the molecular oxygen utilized during a specified incubation period for the biochemical degradation of organic material (carbonaceous demand) and the oxygen used to oxidize inorganic material such as sulfides and ferrous ion. It also may measure the amount of oxygen used to oxidize reduced forms of nitrogen (nitrogenous demand).
Procedure
Fill two BOD bottles with sample (or diluted sample); the bottles should be completely filled.

Abstract

Electronic waste or e-waste is one of the emerging problems in developed and developing countries worldwide. The constantly changing today’s world of technology has led to the serious problem of e-waste. The previous studies show that India has generated 0.6 million tons of e-waste in 2014 which may increase to 0.7 to 0.9 million tons by 2015–2016. E-waste constitutes multiple components some of which are toxic that can cause serious health and environmental issues if not handled properly. The challenge is to develop innovative and cost-effective solutions to decontaminate polluted environments, to make them safe for human habitation and consumption, and to protect the functioning of the ecosystems which support life. Biological approach is currently applied to recovery of metals from contaminated soil, groundwater, surface water, and sediments including air.

Abstract

Mine spoils pose adverse conditions for soil microbes and plant growth, due to its low organic content and other essential nutrients, unfavourable soil chemistry and poor soil texture. Poor microbial population inhibits nutrient transformation, consequently the establishment of the plants and ultimately affects the process of ecological succession. A synergy among different groups of beneficial microbes accompanied by plantation of suitable tree species on mined over area has proved to be effective for speedy and efficient revitalization of the mined affected lands. Inoculation of plantation with efficient strains of native microbes accelerates the soil redevelopment and helps to establish nutrients cycle readily which attracts native flora thereby the pace of natural regeneration is increased. It is therefore imperative to consider the application of effective microflora in restoration of mined lands along with the plantation.

Biomass briquetting is the process of compressing loose and low-density biomass materials such as sawdust, agricultural residues, and forest waste into high-density, solid fuel blocks called briquettes. The process involves mechanical compression under high pressure using machines like piston presses, screw extruders, or hydraulic presses, depending on the technology used.
The main purpose of briquetting is to increase the density of biomass to improve its combustion properties, handling, transportation, and storage efficiency. In most modern systems, briquetting is done without the use of binders, as natural lignin present in the biomass acts as a binding agent under pressure and heat.
Importance of Biomass Briquetting
Biomass briquetting holds immense environmental, economic, and social importance.
1. Environmental Protection
• Briquetting reduces deforestation by providing an alternative to firewood and charcoal.
• It minimizes air pollution by producing cleaner-burning fuel with lower particulate emissions and sulfur content.
• The process helps in carbon sequestration by ensuring the
sustainable use of biomass.
2. Waste Management
• Agricultural residues like rice husk, sugarcane bagasse, cotton stalks, and sawdust, which otherwise cause disposal problems, are effectively utilized.

5.1 Introduction

The densification of biomass involves transforming loose and low-density organic materials, such as wood residues, agricultural waste, and plant-based materials, into compact and energy-dense forms. This process is necessary because natural biomass can be challenging to handle, transport, and store. Densification uses mechanical, thermal, or chemical processes to increase the material’s density and energy characteristics. The resulting products, such as pellets, briquettes, or cubes, offer several advantages, including higher energy content per unit volume, efficient storage and transportation, reduced moisture content, and improved combustion efficiency. These products are utilized in various industries, including energy production, residential heating, waste management, and industrial applications. Biomass densification promotes sustainable practices by effectively utilizing biomass resources, reducing waste, and promoting the use of renewable energy sources while mitigating environmental impacts.