eChapters

Introduction

Agricultural produce are being sun dried since ages as the first step to preserve the product for future consumption. It is still practised being most inexpensive over mechanical and other advanced drying systems. The most prevailing disadvantage of open sun drying is the quality losses due to insect infestation, enzymatic reactions, microorganism growth, and mycotoxin development. On the other side, sun drying is also a highly labor intensive and time consuming process prone to theft and damage by birds. It also suffers with the lack of process control and treatment uniformity (Bansal and Garg 1987, Bansal, 1987).

To overcome these disadvantages several types of solar dryers have been developed over the years (Ekechukwu and Norton 1999). These dryer may be identified into three group namely active, passive and hybrid. As regards their structural arrangement three generic subclasses were also identified: direct-modes (the solar-energy collection unit is an integral part of the entire drying system), indirect-modes (the solar collector and the drying chamber are separate units) and mixed-modes solar dryers. Natural convection solar dryers have become more suitable for rural sector and remote areas, as they work on single energy option and do not require any other external energy source (Pangavhane et al. 2002).

Abstract

Landslides have become a recurring phenomenon in most of the mountainous regions of the world. In Indian peninsular, the landslides which were mostly confined to the tectonically active Himalayan Mountains once, have started spreading over to the other mountain belts of the Peninsula. The Tirumala – Tirupati hills, which is drawing millions of pilgrims from all over the world is facing landslides especially along the newly built southern uphill ghat road. The geology of the area, studied using Geomatics tools like Remote Sensing, SRTM based Digital Elevation Models, GPS Survey, etc., showed that Tirumala hills is under the grip of upward tectonic movements as evidenced from the N-S and E-W oriented Pleistocene faults, intensely dissected Plateau top Cuddapah Quartzites, retreating escarpments, exhaustive debris slope, extensive valley fills along the slopes, colluvial fills in lower slopes, palaeo debris flows along the southern and western obsequent slopes of the Tirumala hills etc. All these indicate the inherent landslide vulnerability of the slopes. The E-W trending dykes which are piercing the slopes and protruding as ridges add further landslide vulnerability to such fragile slopes. So, the new ghat road laid along such southern slope is obviously facing landslides. However, the detailed Geomatics based studies show that the dykes, valley fills and steep slopes are particularly more vulnerable to landslides. Though remedial measures have been broadly evolved, abandoning the southern uphill new ghat road and widening the older northern downhill ghat road seems to be the better and long term feasible alternative to prevent Landslides in the area.

Abstract

Northeastern part of the Indian subcontinent is seismically an active region, and is further prone to excessive rainfall and frequent landslides, which cause disruption of the road networks during the monsoonic months every year. The region owns a typical morphotectonic setup where many active thrusts and faults have carved out the landforms and physiography of the major part of the region. The creeping phenomenon of the N-S trending prominent strike-slip fault, namely the Churachandpur - Mao Fault (CMF), is one of the triggering factors for the frequent landslides and low magnitude earthquakes. The life line of Manipur, the national high way NH39, traverses along and in close proximity to this fault in Manipur, and hence the life is paralysed in the area during the monsoonic months. From the GPS campaign mode studies on the western and eastern sides of the CMF, it is observed that there is a change in the crustal velocities from 16 - 22 mm/yr in the east to 33 - 42 mm/yr in the west. Micro-deformations are also observed in the form of displacements respectively with the vertical, N-S and E-W components of–0.111 mm/yr (downward), 0.03 mm/yr (northward) and –0.011 mm/yr (westward). The net displacement is 0.126 mm/yr with an azimuth of N 85° and dipping of 13° towards west. Neotectonic movements along the CMF, as per the GPS measurements, suggest an aseismic nature of the fault with dextral component. Fault plane solutions of the earthquakes show northerly directed principal P-axis indicating the extension (T-axis) along east-west. The resultant creeping of micro-deformation towards the western slopes of the terrain is aligned with the principal T-axis. The creeping triggers the micro seismicity as well as the landslides along the CMF.

Introduction

The “plant disease triangle” is a fundamental concept in plant pathology that illustrates the interaction between three essential components necessary for the development of a plant disease. Firstly, the host plant which refers to the plant species or cultivar that is susceptible to the pathogen. Host plants provide the necessary environment and resources for the pathogen to establish, grow, and reproduce. Secondly, the pathogen which is any organism (such as fungi, bacteria, viruses, nematodes, or other microorganisms) that can cause disease in plants. Pathogens can infect host plants through various means, including direct contact, airborne spores, soil-borne organisms, or vectors such as insects. And thirdly, the environment which encompasses all external factors that influence the interaction between the host plant and the pathogen. This includes abiotic factors such as temperature, humidity, soil moisture, light, and nutrient availability, as well as biotic factors such as the presence of other organisms (competitors, predators, symbionts) that may affect disease development.

The plant disease triangle illustrates that the occurrence of a disease requires the presence and interaction of all three components: a susceptible host, a virulent pathogen, and a conducive environment. If any of these components is missing or unfavourable, disease development may be inhibited or prevented. Any change in ecosystem can affect plant diseases, because plant disease is the result of interaction between a susceptible host, virulent pathogen and favourable environment. If any of the three factors are altered, the progress of any one disease can change. Although interactions among the three factors must be matched, weather is an important variable due to its dynamic behaviour.

Introduction
A biogas plant is an engineered system designed to generate biogas through the anaerobic digestion of organic materials rich in cellulose, such as cow dung, agricultural residues, poultry waste, and other biodegradable biomass. In the absence of oxygen, microorganisms decompose these materials, producing a mixture of methane (CH4), carbon dioxide (CO2), and traces of hydrogen sulfide (H2S). This biogas can be utilized as a renewable energy source for cooking, heating, and power generation.
In India, cow dung has traditionally served as the primary substrate, and such systems were popularly known as Gobar Gas Plants. The early designs were promoted by the Khadi and Village Industries Commission (KVIC)
Components of a Biogas Plants
A typical biogas plant consists of the following major components:
• Foundation: Provides structural support to the digester and gas holder.
• Digester (Fermentation Tank): The main chamber where anaerobic digestion occurs.
• Gas Holder (Masonry Dome or Drum): Collects and stores the biogas produced.
• Mixing Tank: Used to prepare the slurry by mixing feedstock with water (commonly 1:1 ratio).
• Inlet Chamber/Pipe: Feeds the prepared slurry into the digester

Case Study    :    Indian Ocean Tsunami - 2004

Introduction

Livestock sector plays an important role in the rural economy at national level and this sector is emerging as a driving force in agriculture by contributing towards the income and employment of rural households. Livestock contributed 16% to the income of small farm households that indicates importance of livestock sector as a whole. In 2010-11, livestock generated outputs worth Rs 2075 billion (at 2004-05 prices). Agriculture sector grew at low rate of 4.7% during 2013-14 and contributed 13.9% to National GDP (Economic Survey 2013-14). The livestock sector contributed over 4.1 per cent of the total GDP in 2012-13, that nearly accounts for 29.5% of the agricultural GDP (Economic Survey 2013-14) indicating a significant contribution of the livestock. Sheep and goats are an important livestock species for a large number of rural poor, especially socially backward, marginal and landless labourers in India. Sheep are mostly reared for wool and meat purpose. India ranks third in sheep population and account for nearly 6% of world sheep population, currently India has 65.06 million sheep as per Livestock census 2012.

8.1 Introduction

Biogas is produced by the anaerobic digestion of biodegradable materials with the help of microorganisms. Biogas is also considered as renewable energy source because of is environment friendly nature. Conversion of cattle dung, kitchen wastes and agricultural wastes into biogas have the potential to minimize the burden on the fossil fuel and reduce the environmental pollution. Majority of developing countries specially their rural and suburban areas faces lack of access to the electricity and cooking gas. Biogas technology is emerging as a sustainable technology for waste treatment which could help to tackle the waste disposal issue in developing countries. 

Cellulosic ethanol refers to the production of ethanol, an alcohol fuel, from cellulose found in plant fibers rather than from seeds or fruits. This biofuel can be derived from various sources such as grasses, wood, and other plants. The fibrous components of these plants are mostly from crop residues and other sources indigestible for animals, except for ruminants like cows and sheep, as well as hindgut fermenters like horses, rabbits, and rhinos. The interest in cellulosic ethanol stems from its potential economic value. Plant growth and cellulose formation serve as a mechanism to capture and store solar energy in a chemically stable manner, facilitating easy transport and storage of the resulting supplies. Moreover, the ability of grasses and trees to grow in temperate regions makes cellulosic ethanol commercially viable and offers a potential solution from non-food sources other than grain and tuber starch. This cellulosic ethanol development in the biofuel industry presents an opportunity to derive carbonaceous liquid fuels and petrochemicals, which are vital for our current standard of living, in a balanced and renewable manner by recycling carbon from the surface and atmosphere through any kind of plant orgin or any plant or tree species, Additionally, commercially viable cellulosic ethanol could mitigate the issue associated with conventional biofuels based on grains, which compete with food production and may lead to increased food prices. However, the production of cellulosic ethanol is currently economically feasible and has been implemented on a large scale in India. Several 2G ethanol plants are being developed by companies like Indian Oil Corporation Limited (IOCL), Bharat Petroleum Corporation Limited (BPCL) and Hindustan Petroleum Corporation Limited (HPCL). Different types of biomass contain varying amounts of sugars, and the complexity of the biomass is determined by the structural and carbohydrate components. Plant biomass mainly consists of lignin (13.6-28.1%), cellulose (40.6-51.2%) and hemicellulose (28.5-37.2%), which serve as the raw materials for fuel production. The conversion of biomass into sugars is a crucial step in biofuel production. Therefore, selecting an appropriate pretreatment process based on the biomass type is essential to achieve optimal sugar yield with minimal energy input.

INTRODUCTION

Livestock plays a very important role in the mixed farming system of the country contributing about 25 per cent of Gross Domestic Products (GDP) from agricultural sector. India has the largest population of cattle and buffaloes and the highest producer of milk in the world. India has also the second largest population of goats and one of the leading countries in poultry sector. There has been a tremendous increase in milk, meat and egg production since independence. However, owing to various reasons viz. , low genetic potential, scarcity of feeds and fodders, diseases, poor management practices etc. , the productivity is quite low. Climatic conditions of a place have also an important bearing on livestock production and productivity. Climatic factors like ambient temperature, humidity, solar radiation and wind velocity are the important ones which make up the physical environment of the animal having direct and indirect influences on animal’s responses towards climate. Temperature and humidity are the most crucial with the former being the most researched one. Extremes of hot and cold weather are creating stress to any animal and the effects are more severe under hot and humid climate. The varied effects of undesirable climate on animals are pertaining to feed and water intake, physiological, biochemical and endocrinological aspects, reproduction, health and productivity etc. Thus, the positive and negative effects of the environment on the livestock have been discussed in a way to undertake some protective measures.

Abstract

In the emerging era of wide spread use of IT tools, up-to-date information on water resources is the key to support economic development, conserve the nature as well as to improve the quality of life. Due to rapid rise in population  and food demand, growing economy and improving living standards; the pressure on our water resources is increasing and it will become scarce in the coming decades if not managed at this stage in a integrated way. Water resources management requires a multi-disciplinary approach that combines a collection of technical tools and expertise along with stakeholders of diverse interests and priorities in planning and management and an operational water resources information system at national level is the first requirement.

Introduction

Disasters are the natural and man made extreme events which exceeds the tolerable magnitude of any event, where adjustment is difficult. These events are catastrophic and results in the loss of life and property on a huge scale. These abnormal events form the headlines to the newspapers and media a world and national level.

These processes are beneficial to the human beings because they form the earth and habitable planet for the evolution of life. However, these processes within a short time limit forms, hazardous and such activities adversely affect the human beings and human related activities on a very large scale.

Amongst the three important types of disasters viz. natural, anthropogenic and technological, the first and the foremost natural disaster mainly includes the geological atmospheric and other related natural types viz. floods, earthquakes, cyclones, tsunamis etc.

Next to the mineral frame work the salts in the soil deserve consideration. In fact these salts constitute the main food material of plants besides what the root hairs can get out of the mineral framework in the form of basic materials already dealt with. We are, however, not concerned with the plant food materials, but salts that are in excess and which alter the properties of the soil to such an extent as to influence its behaviour profoundly.

Abstract

The East Coast of Tamil Nadu exhibits a spectacular network of deltas formed by the easterly flowing river systems. The study of raw and digitally enhanced Landsat TM and IRS data shows, that these deltas were formed due to multivariate dynamic processes of fluvial, marine and aeolian actions. The wide fan shaped delta observed northwest and north of Madras city spanning out over an area of 700 sq.km is a feature, standing testimony to the PaleoCauvery river systems.

The regional slope and the overall arcuate arrangement of the crescent shaped lakes in the area and the tentacles of paleochannels show, that it is overall a fan shaped delta and its successive growth towards the sea might have been due to the constant progradation of lobes by continuous reworking of preceding lobes. The depressions in between successive concentric lobes have become the lakes. The absence of any beach ridges in such palaeo deltaic regime suggests that, it would be a sub aerial delta only. The overall arcuate shape of the shoreline in between Madras city in the south and Pulicat lake in the north is due to this fan delta. This feature once again symbolises the active river dominated delta. The Palar delta is a ‘cuspate’ one. The Ponnaiyar river has developed a linear delta, along a narrow depression found in between Tertiary uplands. While the avulsion phenomenon indicates the ancient shoreline near Villupuram, the east-west trending micro sandy uplands within the delta suggest, that it is a tide dominated delta.

Abstract

The tectonic and the geomorphic features observed along the west coast of the area between Mangalore and Cape Comorin show that the NNW-SSE trending west coast has been carved out by the Western Ghats orogeny and the related NNW-SSE trending release fractures. The sinuosity of the otherwise straight coast line is due to Quaternary cymatogenic arching caused by the thrust related to the northerly movement of the Indian plate. The coast line has further attained peaks, projections and serrations due to the ENE-WSW trending series of Precambrian extension fractures which were reactivated gaining the northeasterly directed forces from the rising Carlsberg ridge. Overall, the west coast is being tectonically evolved even today due to the rise of Carlsberg ridge and the Indian plate movement.

Climatic statistics applies quantitative methods to weather and climate observations, transforming raw records into information for forecasting, planning and resource management. This chapter explains how averages, variability, distribution, trends and extremes describe climatic behaviour over time and space. It introduces climate normals, measures of central tendency, dispersion, skewness, kurtosis, data quality, missing-value treatment, homogenization and outlier detection. Statistical interpretation helps distinguish short-term weather fluctuations from long-term climatic patterns. In agriculture, these techniques support crop planning, drought assessment, rainfall characterization and risk management. The chapter establishes the statistical foundation required for scientifically examining climate variability and its influence on crops, ecosystems and agricultural resources.

Air is one of the most important constituents of man’s environment. It is calculated that a roan breathes about 22,000 times a day inhaling about 16 kg of air by weight. Air is present everywhere and its entrance from one place to another cannot be checked. Clean and pure air is very essential for the health and survival of man.

The phenomenon we call tsunami is a series of large waves of extremely long wavelength and period usually generated by a violent, impulsive undersea disturbance or activity near the coast or in the ocean. A tsunami is a very long-wavelength wave of water that is generated by sudden displacement of the seafloor or disruption of any body of standing water.  Tsunami are sometimes called “seismic sea waves”, although, as we will see, they can be generated by mechanisms other than earthquakes.  Tsunami have also been called “tidal waves”, but this term should not be used because they are not in any way related to the tides of the Earth.  Because tsunami occur suddenly, often without warning, they are extremely dangerous to coastal communities.

Green composites are emerging as promising alternatives to conventional synthetic composites in response to climate change, resource scarcity, environmental degradation, and increasing demand for sustainable materials. This chapter reviews the current landscape of green composites and examines the challenges associated with their broader adoption. It discusses technological innovations, smart sustainable materials, bio-based nanocomposites, hybrid systems, environmental and economic implications, and the relationship between green composites and sustainable development. Processing limitations, high costs, regulatory uncertainties, and commercialization challenges are considered alongside opportunities for technological advancement. Life-cycle assessment and supportive policies are important for evaluating environmental impacts and accelerating the transition toward circular and sustainable material systems.

Fourth-generation biofuels, also known as advanced liquid biofuels, represent a progression of biofuel production leveraging advanced technologies (Chiaramonti & Maniatis, 2020). They incorporate the concept of “carbon capture and storage (CCS)” at both the feedstock and processing levels. Utilizing non-competitive feedstocks like algal biomass, cellulosic materials, and genetically engineered microorganisms, 4G biofuels ensure renewable and sustainable production without relying on arable land or food crops. The feedstock is designed not only to enhance processing efficiency but also to capture more carbon dioxide as the crop grows. Thermochemical processing methods are coupled with CCS technologies, which direct the generated carbon dioxide into geological formations or storage areas such as depleted oil fields or mineral storage as carbonates (International Renewable Energy Agency [IRENA], 2021). Fourth-generation biofuels have the potential to significantly reduce greenhouse gas (GHG) emissions and can even achieve carbon neutrality or negativity compared to previous generations of biofuels. This concept aligns with the idea of “Bioenergy with Carbon Storage (BECS)” (Demirbas, 2010). These advanced biofuels are currently in the development and experimental stages, encompassing various applications related to technology, processing, and feedstock. The primary feedstock for fourth-generation biofuels production consists of genetically engineered high-yielding biomass with low lignin and cellulose contents, addressing the challenges encountered in second-generation biofuels production. Alternatively, metabolically engineered crop plants with lower lignin, high oil contents facilitate enhanced carbon capture capabilities, and improved cultivation, harvesting, and fermentation processes and can significantly enhance biofuels production (Dutta et al., 2014).