eChapters

This chapter introduces the scientific principles underlying the structure, properties, processing, preservation, and utilization of wood. It examines the anatomical organization and chemical composition of wood and explains relationships between structure and important physical and mechanical properties. The chapter also discusses moisture interaction, dimensional behaviour, mechanical performance, durability, seasoning, preservation, and wood-processing technologies. Engineered wood products and modern approaches to wood utilization are considered as important components of forest-product development. Together, these topics provide an understanding of wood as an important renewable material and its efficient, durable, and sustainable utilization.

Precipitation is the deposition of atmospheric moisture on earth. All the water sources on the earth depend on precipitation only. Precipitation involves condensation, growth of hygroscopic nuclei, cooling of nuclei at different stages and their fall on to the earth's surface. If the cloud particles are too small and remain suspended in the sky, they may not fall on the earth. There may be several clouds but no precipitation. Under certain conditions, water particles formed tend to fall but do not reach the surface since they get evaporated on the way. Only when the cloud droplets or ice crystals grow to certain size and can no longer remain floating due to buoyancy of air, do they fall as precipitation.

FORMS OF PRECIPITATION

Precipitation form is the state that the moisture is in, i.e., liquid, freezing, or frozen (solid). Because atmospheric conditions vary greatly both geographically and seasonally, several different forms of precipitation are possible. All forms of precipitation are collectively termed hydrometeors. Hydrometeors have been classified into 50 specific types. Out of these precipitation forms, only rain (liquid form) and snow (solid form) make significant contribution to total precipitation. In many parts of the world, the term rainfall is used interchangeably with precipitation.

Sustainability does not denote a fixed state of things. It is a dynamic phenomenon: a phenomenon that tends to advance towards a higher state of being. The range of a journey of sustainability extends from nothing to everything, from a simple system to a more complex system, or from an unstable or less stable system to a stable or more stable system. Speaking in ecological terms, the transformation of unproductive desert land into a forest in ecological climax over time is how the phenomenon of sustainability works.

The term ‘sustainable development’ was first of all used in 1980 in the World Conservation Strategy (IUCN-UNEP-WWF 1980). However, this term was brought into the focus of the world for the first time in the United Nations World Commission on Environment and Development (WCED) Report, popularly known as the Brundtland Commission Report Our Common Future in 1987. Sustainable Development in the WCED Report has been defined as Development that meets the needs of the present without compromising the ability of the future generations to meet their own needs.

This chapter introduces the scientific, biological, chemical, and economic importance of medicinal and aromatic plants associated with forest and allied systems. It examines their classification and diversity, chemical constituents, harvesting practices, processing, value addition, and extraction techniques. The chapter highlights the potential of these plants as valuable biological resources and explores approaches for their productive utilization. Sustainable harvesting, appropriate processing, and value addition are important for improving their economic potential while supporting conservation and responsible management of plant resources.

Large parts of the country perennially reel under recurring drought. Over 68% of India is vulnerable to drought. The ‘chronically drought-prone areas’ – around 33%, receive less than 750 mm of rainfall, while 35%, classified as ‘drought-prone’ receive rainfall of 750-1,125 mm. The drought-prone areas of the country are confined to peninsular and western India – primarily arid, semi-arid and sub-humid regions. Approximately 218.1 thousand square kilometers of land in India under sub-tropical semi-arid and arid conditions are spread over the states of Rajasthan, Gujarat, Haryana and Madhya Pradesh (Anonymous, 1974). Agriculture is predominantly rainfed and the region is drought-prone. Less than 23% of land is irrigated. Forest cover is <5% and waste and fallow areas occupy 42% of the land.

Clouds are the most important form of suspended water droplets caused by condensation. The World Meteorological Organisation defined cloud as a visible aggregate of minute particles of water or ice or both, in the free air. This aggregate may include larger particles of water or ice and particles such as those present in fumes, smoke or dust. The typical size of these water droplets and ice crystals range from less than 1 µm to 50 µm. When surrounded by billions of other droplets or crystals, they become visible as clouds. In the atmosphere sufficient moisture is required to allow condensation to take place. Then, moisture needs a suitable surface upon which it can condense. In free air, condensation begins on hygroscopic nuclei such as aerosols. These are microscopic particles and include dust, smoke, salts and chemical compounds. Nuclei range in size from 0.001 µm radius to over 10 µm. On an average, oceanic air contains one million condensation nuclei per litre and land air holds some 5 or 6 million. On hygroscopic particles such as sea salts, condensation can begin before the air is saturated. Supersaturation in clouds rarely exceeds one per cent. On average, clouds contain only four per cent of the total water in the atmosphere at any one time. Almost all clouds exist in the troposphere, although the tops of some severe thunderstorms occasionally extend to the stratosphere. Clouds move along with the wind and remain stationary in calm winds. They grow vertically and horizontally, depending on the temperature of the cloud and its ambient temperature. They may dissipate or precipitate. Under favourable atmospheric conditions, they burst and fall as rain. Clouds complete the following functions.

This chapter introduces the close relationship between climate change and forest ecosystems and examines how changing temperature, rainfall, drought, extreme weather, fires, pests, and diseases affect forest health and productivity. It discusses the importance of forests in carbon sequestration, biodiversity conservation, climate regulation, and ecosystem services. The chapter also examines climate-change mitigation through sustainable forest management, afforestation, reforestation, and initiatives such as REDD+. Particular attention is given to the Indian scenario, conservation policies, government initiatives, and challenges associated with forest degradation and climate change

Dyes are one of the most important by products of the plants, as they are related with cultural practices, rituals, arts and crafts, fabrics and to satisfy personal embodiment. However, dye yielding plants have not received significant attention (Grover and Patni, 2011). Dye is a substance that has affinity to the substrate to which it is being applied such as textile fibers, foodstuffs and powder. They are organic coloured substances which absorb light in the visible part of the spectrum and have the property of colouring the substrate they are applied to.
 
Colourants which are obtained from plants and natural sources are known as natural dyes. Natural dyes have been traditionally used in most of the countries. These dyes were obtained from roots, leaves and bark (Akhtar et al., 2012). Natural dyes find use in the colouring of textiles, drugs, cosmetics, etc. Owing to their non-toxic effects, they are also used for colouring various food products. In India, there are more than 450 plants that can yield dyes (Siva, 2007).

Abstract

Increased human activities such as agriculture, mining, and manufacturing have resulted in rapid increase of green house gases (GHGs) in the atmosphere. Atmospheric accumulation of the GHGs results into global warming and climate variability or change. Climate change due to enhanced greenhouse effect arising as a result of human activity is considered a major global environmental threat to mankind today. Perhaps nowhere in the globe are people more vulnerable to climate change than in Sub-Saharan Africa (SSA). Most livelihoods in SSA are climate-sensitive due to over dependency on land and other natural resources and are thus perched on the brink of disaster due to climate change.

Climate change is now undoubtedly affecting millions of people across Africa and it actually threatens to wipe-out the past and current global efforts made to tackle poverty unless urgent and robust decisions and actions are taken. This is also a wake-up call for the world to adopt alternative development models that would ensure massive cuts in GHG emissions to avoid a potentially irreversible change. Scientists have warned that unless the global community, especially the developed countries, take genuine steps now to reduce their emissions; many more millions of people in the developing world will be negatively impacted by climate change.

It is estimated that the country needs about 245mt of food grains, 30mt of sugar and jaggery, 7 lakh of tea, 1.7 lakh t of coffee, 10mt of vegetable oil and 17m bales of cotton. For realizing this, irrigated agriculture has to play an important role. To achieve this water use efficiency (WUE) in the irrigation sector has to be improved considerably as bulk of the available water is used in agriculture. But, with the ever-increasing population and industrialization problems, the demand for water by these sectors is bound to increase manyfolds in future. The requirement of water by different sectors during 2025 is estimated to be 105 m ham, which is 30 m ha m more than the present one. The share of water utilization for agriculture is expected to get reduced from the present percentage of 8~ to a value of 73 by 2025. Further, the demand for water for agricultural purposes is estimated to increase from 470 krrr’ to 740 krrr’ in a period of four decades (Table 1). During the same period there will be four­fold increase in the water demand for non-agriculture purposes.

1. Introduction

Arid lands, the “dry domains”, cover ~ 32 % of the continental surface of the world. This geographical region is defined by low precipitation and usually highly variable rainfall patterns (Heathcote, 1983; Groombridge, 1992; Watson et al., 1995). These lands are extremely diverse with respect to landforms, soils, fauna, flora, water balance, human activities and the binding element of all arid lands.

Abstract

This chapter highlights the significance of irrigated desert agriculture as a prime cause of the settlement and welfare of nomads and the consequent reduction of conflicts over limited land resources. Um Jawaseer Desert Farm Project is located in Bayouda Desert, the Northern State about 200 km north of the capital Khartoum. The planning and management approaches of such irrigated projects were discussed with special emphasis on the participatory approach. In this respect the roles of the donor (NGO), traditional tribal institutions and the project beneficiaries were illustrated. The project beneficiaries were organized into the farmers, well and women committees. The environmental and socioeconomic impacts of the project were evaluated. The project maintained food security, improved nutritional status, hygiene, housing environment and assisted in the provision of primary education and basic health facilities. Cost/benefit analysis showed the high profitability of the project. Other positive impacts include conservation of the fragile environment and biodiversity and improvement of animal productivity. Consequently, the area which witnessed an out-migration, during the seventies and the eighties, due to drought and desertification is now experiencing incoming migration.

However, adaptation to the sedentary mode of life was a real challenge. The most striking benefits of the project was that of women training for the, involvement in the decision-making process and empowerment, since 20% of the land is allocated for women. In addition to that, problems like build up of salinity, sand encroachment, low organic matter content and increased susceptibility to some water-related diseases due to irrigation were tackled successfully.

1.1 General

Access to energy is a crucial enabling condition for achieving sustainable development. Prudent energy policies and research can play an important role in steering both industrialized and developing countries onto more sustainable energy development paths. Specifically, they can strengthen the three pillars of sustainable development: the economy, by boosting productivity, social welfare, by improving living standards and enhancing safety and security, and the environment, by reducing indoor and outdoor pollution and remediating environmental degradation.

1.2 Energy and it’s Requirement

Energy in any form is necessary to meet many of our requirements. It’s varying definitions shows the importance of energy in our life.

Biodiversity encompasses the different kinds of life we find in one area— the variety of animals, plants, fungi, and even microorganisms like bacteria that make up our natural world. Each of these species and organisms work together in ecosystems, like an intricate web, to maintain balance and support life. Biodiversity refers to all species and living things on Earth or in a specific ecosystem. Biodiversity brings together the different species and forms of life (animal, plant, entomological and other) and their variability, that is to say, their dynamics of evolution in their ecosystems. Traditionally, there are three levels of biodiversity: genetic diversity, species diversity, and ecosystem diversity. But what does each of these levels really mean.

Abstract

The desert environment is one of the most challenging environments for human habitation. Inhabitants have to deal with climatic factors such as high temperature, sandstorms, flash floods and lack of water due to low rainfall. The people of Saudi Arabian desert had developed various traditional adaptation approaches such as living in tents, wearing head dresses, settling close to source of water, using camel for transportation, irrigation farming and traditional land management (hema). In recent times, modern technologies for air conditioning, transportation and housing have replaced the traditional adaptation methods especially in the cities. The modern technologies have reduced the challenges faced by the traditional society but has thrown up new challenges to sustainability. The new issues include urban flooding, depletion of underground water, high energy demand and consumption and loss of natural habitat to urbanization. This chapter reviews the traditional and the modern adaptation techniques in Saudi Arabia especially in the urban areas. It examines the implication of the changes for urban sustainability and explores different approaches for reducing the negative impacts. The chapter also dwells on the role of geospatial techniques in adapting to the desert environment.

The climate crisis has emerged as one of the most pressing issues of our time, threatening the very foundations of our planet and its inhabitants. The scientific consensus is clear: human activities, particularly the emission of greenhouse gases, are significantly contributing to the rising global temperatures, devastating natural disasters, and unpredictable weather patterns. As the world grapples with the challenges posed by climate change, a critical question arises: is it a compromise or a compulsion to act? The climate crisis is a complex and multifaceted issue, requiring a comprehensive and collective response. On one hand, there are those who advocate for a compromise, suggesting that economic growth and development can be balanced with environmental concerns (Fig. 2.1). This approach emphasizes the need for gradual and incremental changes, allowing countries and industries to adapt to new regulations and technologies. Proponents of this view argue that a compromise is necessary to avoid economic disruption, ensure energy security, and promote international cooperation. Fig. 2.1. Eco-evolutionary feedback by carbon cycling traits, in response to climate change On the other hand, there are those who insist that the climate crisis demands a compulsion to act, requiring immediate, drastic, and collective action. This perspective emphasizes the urgent need to reduce greenhouse gas emissions, transition to renewable energy sources, and protect vulnerable communities from the impacts of climate change. Advocates of this view argue that the window for action is rapidly closing, and that anything less than a concerted and emergency response will condemn future generations to a catastrophic and unlivable world. The science unequivocally supports the latter perspective. The Intergovernmental Panel on Climate Change (IPCC) has warned that in order to limit global warming to 1.5°C above pre-industrial levels, global carbon emissions must reach net-zero by 2050. This requires a 45% reduction in emissions by 2030, and a complete phase-out of fossil fuels by 2050. The consequences of inaction are stark: more frequent and intense natural disasters, sea-level rise, water scarcity, food insecurity, and mass migration (Fig. 2.1).

Carbon may present in soil in four different forms:

1. Carbonates: Mainly as CaCO₃ and MgCO₃, active CO₃^2- and HCO₃^- ions and gaseous CO₂.
2. Highly condensed elemental organic form: Charcoal, graphite.
3. Completely decomposed resistant organic residues: Humus.
4. Undecomposed and partially decomposed organic residues.

Environment: Environment means “surrounding”. First definition of environment was given by “Ernst Haeckel”. According to this - The relation between all organic and inorganic atmosphere of any animal is called environment.

Clouds are visible mass of little drops of water or frozen crystals suspended in the atmosphere above the surface of the earth. The World Meteorological Organisation defined cloud as a visible aggregate of minute particles of water or ice or both, in the free air. This aggregate may include larger particles of water or ice and particles such as those present in fumes, smoke or dust.

Clouds are the most important form of suspended water droplets caused by condensation. The typical size of these water droplets and ice crystals range from less than 1 μm to 50 μm. When surrounded by billions of other droplets or crystals, they become visible as clouds. In the atmosphere sufficient moisture is required to allow condensation to take place. Then, moisture needs a suitable surface upon which it can condense. In free air, condensation begins on hygroscopic nuclei such as aerosols. These are microscopic particles and include dust, smoke, salts and chemical compounds. Nuclei range in size from 0.001 μm radius to over 10 μm. On an average, oceanic air contains one million condensation nuclei per litre and land air holds some 5 or 6 millions. On hygroscopic particles such as sea salts, condensation can begin before the air is saturated. Supersaturation in clouds rarely exceeds one per cent. On an average, clouds contain only four per cent of the total water in the atmosphere at any one time. Almost all clouds exist in the troposphere, although the tops of some severe thunderstorms occasionally extend to the stratosphere. Clouds move along with the wind and remain stationary in calm winds. They grow vertically and horizontally, depending on the temperature of the cloud and its ambient temperature. They may dissipate or precipitate. Under favourable atmospheric conditions, they burst and fall as rain.

Abstract

Rice being the major food crop in the world requires a serious attention to protect the crop from variable pest attack under change in climatic scenario. More then 100 species of insects have been recored as rice pest affecting the productivity as well as maintaining sustainability in rice production. Bio-control agents for the control of rice pests are to be systematically evaluted. More than 1500 species of pathogens are formulated as microbiological insecticides. So our current awareness in pest- pathogen-abiotic interactions should be made use in designing the crop protection strategy.