eChapters

The palmyrah palm exists both in the wild as well as in cultivation, ranging from sea level about 800 amsl. It is usually grown in seasonal tropical or subtropical climates on sandy soils. It is a very adaptable palm, however, growing well in dry areas and is quite drought resistant. It also grows in per-humid areas and survives water logging quite well. The worldwide distribution of natural and cultivated populations of the palmyrah shows that it occupies a band on either side of the equator and extends laterally over a considerable girth. The country wise distribution of the palms are Mauritania, Senegal, Mali, Gambia, Guinea-Bissau, Guinea, Ivory Coast, Upper Volta, Nigeria, Gaban, Congo, Sudan, Tanzania, Madagascar, Saudi Arabia, Iraq, Iran, Pakistan, Bangladesh, Sri Lanka, Myanmar (Lubeigt, 1977), Thailand, Cambodia, Malaysia and Indonesia (Kovoor, 1983). In India, the palms are wide spread in Kerala, Tamil Nadu, Karnataka, Andhra Pradesh, Maharashtra, Odisha, Madhya Pradesh, Bihar and West Bengal.  Isolated patches are also seen in Assam, Gujarat and Uttar Pradesh (Anonymous, 1948). The palmyrah is considered as a slow grower and the growth rate decreases in regions of higher altitude (Tjitrosoepomo and Pudjoarinto, 1982).

Hypothesis testing enables researchers to determine whether apparent climatic or agricultural differences are statistically meaningful. Parametric tests are appropriate when data satisfy assumptions such as normality and homogeneity, whereas non-parametric tests are useful for irregular, ranked or non-normally distributed observations. This chapter discusses commonly used procedures, assumptions, selection criteria and interpretation. Applications include comparing weather conditions, evaluating crop responses, detecting rainfall or temperature trends and assessing environmental change. Methods such as t-tests, Mann-Whitney, Wilcoxon, Kruskal-Wallis and Mann-Kendall tests are relevant to agroclimatic research. Appropriate test selection improves analytical reliability and supports evidence-based decisions concerning climate variability, crop performance and agricultural adaptation.

Key words : Participatory GIS (P-GIS), Geo-Participatory Rural Appraisal (Geo-PRA) Social Mapping, Resource Mapping, Seasonality Maps, DGPS.

Participatory GIS

Geographical information System (GIS0 and Geographics Information Technologies (GITS) are no more restricted to the elite group of the society. Planners are busy in searching ways in merging community participation with GIS in the context of urban planning, environment equity, sustainable development etc. (Aitken and Michael, 1995, Craig and Ehwood, 1998; Talen, 2000 and Sieber, 2000). In all the cases, common thing is the linking of community participation and GIS in a diversity of social and environmental contexts. Through development, demonstration and modification of methodologies by academics and practitioners the concept of Participatory GIS (P-GIS) emerges. It is an outcome of a spontaneous fusion of participatory forms of development planning with modern information technologies. Experts gave considerable thoughts on the probing questions like whether a bottom up GIS could be successfully developed, how many community participation could be incorporated into GIS and to what context such participation would serve only to legitimize conventional top-down decision making. From these reflections only the concept of people’s participation GIS arose.

Particulate soil organic matter (POM) is one of the important soil organic matter (SOM) pools and matches the characteristics of a slow, decomposable or stabilized SOM pool. The POM fraction is considered as one of the indicators to changes in management and thus has been used in soil quality assessment studies.

Abstract

The paper deals with the roles played by the NGO’s in the relief and rescue phase of Dec, 2004 tsunami and the effective role played by NCRC -NGO Coordination and Research Centre - in the rehabilitation phase along Tamil Nadu coast by creating successful partnership with government and the public.

Keywords: The Role of NGO’s, Tsunami 2004, Relief and Rehabilitation, NGO Coordination Research Centre.

INTRODUCTION

The scale of the tsunami disaster was unprecedented and the response too was out of the ordinary. Tamil Nadu was the worst affected state in India with Nagapattinam district being the most affected with over 6000 lives lost, about 40,000 houses damaged or destroyed and 1.96 lakh people affected. Relief poured in from both government and non-governmental organizations, including the religious organizations, and the first few days witnessed heartwarming outpourings of help and support.

There were about 400 NGOs and an equal number of volunteers to help in the relief operations which included food, clothing, household utensils and bedding. With such a large scale of external support, mainly from organizations and people from outside Nagapattinam, it was not surprising that chaos and confusion marked the first few days of relief operations still. Based on the experience of some professionals experienced in disaster management, a coordination platform was created called the NGO Coordination Cell. This platform was managed by two NGOs, who had long standing field presence in Nagapattinam, viz., South Indian Federation of Fishermen Societies and SNEHA, with the mandate and support of the District Administration. The main role of this platform was to meet the field based requirements of all the relief camps with the resources and materials available with the NGOs and the Govt. The paper briefly deals with challenges faced by the NGO’s in relief and Rehabilitation of the historical Dec 2004, Tsunami.

Introduction

The thermal performance of a building refers to the process of modeling the energy transfer between a building and its surroundings. For a conditioned building, it estimates the heating and cooling load and hence, the sizing and selection of HVAC equipment can be correctly made. For a non-conditioned building, it calculates temperature variation inside the building over a specified time and helps one to estimate the duration of uncomfortable periods. These quantifications enable one to determine the effectiveness of the design of a building and help in evolving improved designs for realizing energy efficient buildings with comfortable indoor conditions. The lack of proper quantification is one of the reasons why passive solar architecture is not popular among architects. Clients would like to know how much energy might be saved, or the temperature reduced to justify any additional expense or design change. Architects too need to know the relative performance of buildings to choose a suitable alternative. Thus, knowledge of the methods of estimating the performance of buildings is essential to the design of passive solar buildings.

1    Introduction to Patent Laws    540

2.    An Overview of the Patenting Process    541

    2.1.    Inventor’s disclosure, 542
    2.2.    Patentability search, 542
    2.3.    Patent application preparation, 542
    2.4.    Patent application amendment, 542
    2.5.    Patent application examination, 543
    2.6    Main parts of a patent, 543
    2.7.    Granting of patent, 544
    2.8.    Date and term of patent, 544
    2.9.    Provisional specification, 544
    2.10.    Complete specification, 545
    2.11.      Cost of patenting, 545

 1. A mineral that forms an original component of rock is called

a. Primary         b. Secondary

c. Essential         d. Accessory

9.1. Introduction

Human dependence on natural processes for the goods and services provided by nature, especially food, fuel and fibre, has been a known fact. In recent times, the value of less tangible services, such as climate control, water f iltration, and soil fertility, as well as recreational and cultural services has been emphasized also. Ecosystem services underpin human existence, health, and prosperity. It has been beneficial to humans through the transformations of resources (or environmental assets, including land, water, vegetation, and the atmosphere) into a flow of essential goods and services like clean air, water, and food (Costanza et al., 1997). Ecosystem services are those functions of ecosystems- including agroecosystems that are useful to humans or supportive of human well-being (Kremen, 2005). Services provided by ecosystems receive little notice for their support to human civilization often leading to poor management of the ecosystems. Land use systems influence ecosystem functions, which determine the supply of ecosystem services. Land and water resources are under considerable pressure from the expansion of cultivated and residential lands. Diverse land use in agrarian landscapes not only fosters biodiversity, but also provides potential ecosystem services such as air cleaning by vegetation, natural water filtration by plant roots, natural pest suppression, soil conservation, nutrient retention, and crop pollination by insects, etc. Lowland floodplains or waterlogged land areas are generally more conscious of the benefits provided by ecosystem services. It is important to create awareness among the people on provisioning services provided by ecosystems, such as crops, biofuel, fresh water, natural medicine, wildlife, and several cultural services. Managing ecosystem services, which link human well-being to conservation outcomes, is essential for achieving the sustainable development goals (SDGs) of the United Nations (Zhang, 2017).

Abstract

Soils of various depth ranges were identified at the experimental farm of Central Arid Zone Research Institute, Regional Research Station, Kukma-Bhuj, Gujarat. Different depth range of soils included in this study were shallow soil (effective soil depth <15 cm), moderately deep soil (effective soil depth15- 25 cm), deep (effective soil depth 25-70 cm), and very deep (effective soil depth 70 to >1m). The soils are developed from calcareous and ferruginous sand stone and mud stone. A field experiment was carried out to study the performance of different crops and grasses under variable soil depths. Crops namely, clusterbean (Maruguar), greengram (K 851), sesame (GT2), groundnut (GG2) and pearl millet (Pusa 23) and grasses C .ciliaris (CAZRI-75) and L. sindicus (CAZRI 30-5) were grown in these four different soil depths.

Scope

This method is suitable for most OPs, OCs, SPs, and herbicides residue analysis.

Apparatus required

• Homogenizer
• Centrifuge
• Nitrogen evaporator

Principle

Acetone is used for extraction the most nonionic pesticide residue, and residue are partitioned from acetone to dichloromethane/hexane phase. After removing traces dichloromethane, final extract is made up with acetone. This extract can be determined by GC with selective detectors. Further for organochlorine and synthetic pyrethroids extract should be cleaned up using florisil column. And for determination organophosphate extract should undergo to charcoal-celite cleanup.

For the determination carbamates, the extract is subjected to C-18 solid phase cartridge clean up.

Principle

Pesticide residues in milk are derived from the intake of pesticide contaminated feed and fodder.

Scope

This method is suitable for most OPs, OCs, SPs, and herbicides residue analysis.

Principle

Pesticide residues are extracted from soil using a mixture of acetone/water in a soxhlet apparatus for 7-8 hours. This extract can be determined directly by GLC.

Scope: This method is suitable for most OPs, OCs, SPs, and herbicides residue analysis.

India is recovering from the euphoria of the Green Revolution and battling the residual effects of the extensively used chemical fertilizers and pesticides in the country’s soils. The decade from 1980 to 1990 alone saw the area under pesticides in India, increased a whopping 20-fold, from six million hectares to 125 million hectares. After a high annual consumption of nearly 75000 MT reached in the early ’90s, interventions in the form of Integrated Pest Management (IPM) practices have only now started to show a declining trend in the use of pesticides in India. Interestingly, India’s consumption of pesticides per hectare is low (0.288 kg/ha) when compared with world averages—0.5 kg/ha against Korea’s 6.60 kg/ha and Japan’s 12.0 kg/ha. According to the pesticides industry statistics, India spends US $3/ha on pesticides compared with US $24/ha spent by Philippines, US $255/ha spent by South Korea and US $633/ha by Japan. Yet, despite a comparatively low use of pesticides in India, the contamination of food products in the country is alarming. About 20 per cent of Indian food products contain pesticide residues above tolerance level compared to only 2 per cent globally. No detectable residues are found in only 49 per cent Indian food products compared to 80 per cent globally. A pesticide is any substance or mixture of substances intended for preventing, destroying, repelling or mitigating any pest. Though often misunderstood to refer only to insecticides, the term pesticide also applies to herbicides, fungicides and various other substances used to control pests.

Pesticides and their metabolites have received particular attention in the last few years in environmental trace organic analysis because they are regularly detected in food products, surface/ground waters and soil strata throughout the world as consequence of their widespread use for agricultural and nonagricultural purposes. So it is the need of the hour to study the levels of pesticides residues in plants, water and soil and their fate in environment after its degradation.

It would be necessary to work out tolerance limits of pesticides residues in/on crops, soil and water and the efforts, therefore, are directed towards various residue analytical methods like TLC, GLC and HPLC etc. which are suitable for the purpose.

A pesticides residue is any substance or mixture of substances in food, agricultural commodities or animal feed resulting from the use of pesticides and includes any specified derivatives such as degradation products and impurities that are considered to be of toxicological significance.

Pesticide residue analysis (PRA) may be defined as the quantitative and qualitative analyses of the representative samples drawn from agricultural field, market and environment for pesticides and their toxic metabolites.

Principle: Acetone is used for extraction the most nonionic pesticide residue, and residue are partitioned from acetone to dichloromethane/hexane phase. After removing traces dichloromethane, final extract is made up with acetone. This extract can be determined by GC with selective detectors FPD-P/NPD without cleanup. Further for organochlorine and synthetic pyrethroids extract should be cleaned up using florisil column. And for determination organophosphate extract should undergo to charcoal-celite cleanup.

Pesticides are used to control plant growth (herbicides), insects (insecticides), worms  (vermicides), bacteria (bacteriocides), fungi (fungicides), and other organisms. Almost without exception, pesticides are used to benefit humans by the control of unwanted species of plants (e.g. weeds in a lawn), disease-causing bacteria (e.g., Pneumococcus, the causative agent of pneumonia), disease-carrying insects (e.g. malarial or yellow fever mosquitoes) or in controlling destruction of agricultural products by disease-causing organisms (e.g., corn-borers, the virus of anthurium blight). Although they are by and large mostly beneficial, pesticides used both properly and improperly are also “resources out of place”, that is pollutants, that are subject to normal ecological processes.

24. IGNEOUS ROCKS

Introduction : Petros = rocks and logos = science

Petrology means the science of rocks. It deals with the mode of occurrence composition, classification and origin of rocks and their relation to geological processes and history of the earth.

Rocks can be studies in two ways : The study of rocks as specimens in the laboratory is called Petrography which places emphasis on the purely descriptive part from textural mineralogical and chemical point of view. Petrogenesis deals with the origin and processes of formation of rocks. Petrology is a broader term which includes both petrography and petrogenesis.

Igneous rocks are formed by cooling and solidification of magma, either underneath the earth’s surface or above the earth’s surface.

pH is defined as the negative logarithm of hydrogen ion concentration. The amount of the acidic gas CO2 significantly affects the pH of natural water body. Fish have usually blood pH levels of 7.4, but little deviation has been observed, perhaps 7.0 to 8.5pH range is more suitable for the growth and reproduction of the fish. However, pH range 4.0 to 6.5 and 9.0 to 11.0 cause fish death in water pH less than 4.0known as acidic death point or even more than 11.0 known as alkaline death point. The pH of fresh water more fluctuating as compare to sea water due to release and consumption of CO2 and O2 respectively by bacterial oxidation and respiration. However, the pH of marine water often constant at 7.8-8.3 due to presence of buffer like HCO3-, CO2 -, CO3-2 etc.
Principle
The estimation of hydrogen (H+) ion activity through sensing electrode. Electrode composed of a narrow glass bulb with fixed concentration of HCI solution inside it. A wire made of an Ag-AgCI placed in to the bulb which work as electrode to fix voltage. Potential difference forms between the solution in the glass bulb and the sample solution when the electrode immersed into solution.