eChapters

Abstract

The present study deals with the slope instability analysis of a vulnerable stretch of 16 km between Pratapgarh road intersection and Mahabaleshwar town, which is a part of the state highway-72, Satara district, Maharashtra, India. The highway remains closed during the monsoon seasons, due to the recurrent instances of cut slope failures. So the present research work was conducted with an aim to study the reasons, extent and mechanism of the cut slope failures along the road sections as well as optimization of tools for the assessment of road cut stability of the area. The 16 km stretch was divided into seven vulnerable sections (M1; near Mahabaleshwar - M7; near Poladpur) based on the geological, geometrical and structural attributes. The slope forming mass primarily consists of laterite, weathered basalt and fresh jointed basalt, which are interbedded with red bole at some sections. Limit equilibrium, finite difference and finite element simulation were performed for seven cut slope sections, using similar geometries and material strength attributes for all the analyzing techniques. The assessment was carried out for both dry and saturated conditions to emulate the monsoons. The factor of safety yielded through the limit equilibrium method was the most conservative of all the tools; while the finite element method gave the least conservative figures in terms of factors of safety, being close to the field observations, the safety factor results of finite difference methods were between the limit equilibrium and finite element methods. The cut slope sections composed of weathered basalts and laterites (M1, M2, M3, M6) were found most vulnerable to failure during rains, while the sections composed of fresh jointed basalts (M4 & M5), though overall stable, are susceptible to planar and wedge failures.

Introduction

India has a long tradition of agroforestry which is widely practiced in all ecological and geographical regions of the country. Traditional agroforestry systems are broadly based on indigenous knowledge and the species are selected as a part of the cultural patterns of the community. The farmers and land owners in different parts of the country integrate a variety of woody perennials in the crop and livestock production systems depending upon the agro-climatic conditions and local requirements.

“Sustainable Water Resources Management Strategies” embarks on a comprehensive exploration of the paramount challenges and essential solutions for safeguarding our planet’s most precious resource: water. This recognizes that water is not merely a commodity but the very lifeblood of ecosystems, a cornerstone of human health, a critical input for food production, and an indispensable element for industrial progress and societal well-being. Building upon a fundamental understanding of the intricate hydrological cycle, the distribution of global water resources, and the escalating anthropogenic pressures they face, we now turn our attention to the proactive and forwardthinking approaches that define sustainable water resources management. • In an era marked by increasing environmental consciousness and the stark realities of climate change, the traditional paradigms of water management are proving inadequate. Growing populations, rapid urbanization, and the expansion of industrial activities place unprecedented demands on both the quantity and quality of available water. Furthermore, the erratic and often extreme

Introduction

Geostatistics is a branch of statistics that deals with the analysis and modelling of geo-referenced data. Its main aims are to quantify spatial variability and to create maps from point observations. Of course there is much more to geostatistics than just that and indeed some of the other uses of geostatistics are addressed in this chapter too, but the emphasis is on the assessment of spatial variability and geostatistical interpolation.

The first step of geostatistical interpolation is to quantify the spatial correlation structure of the variable of interest. This can be done by examining the observations and how these vary in space. Next spatial interpolation makes use of the quantified spatial correlation to derive optimal predictions at unobserved locations and create a map. The interpolation error is quantified as well, which helps to design optimal spatial sampling schemes that balance data collection costs and map accuracy. All this will be explained in this chapter, but in order to do so we first need to explain the statistical theory that underlies geostatistical interpolation followed by representation of the spatial correlation structure, the basics of geostatistical interpolation (‘kriging’), kriging extensions and spatial stochastic simulation.

A Master’s program in Agricultural Meteorology offers a deep dive into the intersection of atmospheric science and agricultural practices. Individuals who choose this path have often previously explored the intricate relationship between weather, climate, and crop cultivation, demonstrating a keen interest in how environmental factors shape agriculture. The decision to pursue a Master’s degree in this field signifies a commitment to acquiring specialized knowledge and skills essential for understanding and addressing the meteorological influences on agricultural systems.
Such a program serves as a focused immersion into the specific knowledge and abilities required to effectively analyze and navigate the meteorological aspects of agricultural production. Prospective students may have backgrounds in meteorology, agriculture, environmental science, or related disciplines, and their initial explorations might have touched upon topics like controlled environment agriculture, microclimate management in different agricultural settings, the impact of atmospheric conditions on plant and animal systems, and the effects of extreme weather events on agricultural outputs.
The structure of a Master’s program in Agricultural Meteorology is typically designed as a comprehensive educational expedition. An initial overview usually outlines the program’s key components: the curriculum that dictates the core areas of study, the coursework that provides the necessary tools and knowledge, the detailed content covered within various courses, and the academic and career counseling services that offer guidance throughout the student’s journey.
The field itself is inherently interdisciplinary, drawing on foundational principles from meteorology, climatology, and diverse agricultural sciences. A Master’s curriculum builds a strong knowledge framework by exploring advanced atmospheric physics and dynamics, which provides a sophisticated understanding of weather patterns and climate variability. Simultaneously, it enhances the student’s comprehension of plant physiology, crop science, soil science, and other agricultural disciplines, enabling an effective analysis of how meteorological factors affect crop growth, development, yield, and overall quality.
• The relevance of Agricultural Meteorology is increasingly critical in the face of global climate change (Fig.5.1). Master’s studies in this area equip individuals with the specialized knowledge to analyze climate change impacts on agriculture, contribute to the development of adaptation

Introduction

The world demand for wood is continuously increasing due to increase in population. The ever increasing population has led to depletion of existing timber reserves and the forestland base has been reduced by increased allocation of forest areas to urban, agricultural, recreational and other uses. The growing awareness towards development of plantations has generated a voluminous increase in the demand for quality planting material. Conventionally, propagation is achieved through sexual (seeds) or vegetative methods (rooting of cutting, grafting, layering, etc). Propagation through seeds is routinely used for production of planting material but it generates immense genetic variability which is not desirable while propagating perennial tree species. In order to propagate selected trees with desirable features vegetative propagation methods like rooting of cuttings, grafting, layering etc have been developed. These methods can produce genetically identical off springs thereby preserving the advantageous traits;

Introduction

Indian agriculture is entering in a new phase. The major research and development efforts in the Green revolution era focused on enhancing production and productivity of selected food grains crops and only in Indo-Gangetic plains. The new challenges demand that issues of resource and input use efficiency receive high priority to ensure past gains can be sustained and further enhanced to meet the emerging needs. Issues of conservation have assumed importance in view of widespread resource degradation and the need to reduce production costs, increase profitability and make agriculture more competitive. The conventional mode of agriculture through intensive agricultural practices was successful in achieving goals of production, but simultaneously led to degradation of natural resources. The growing concerns for sustainable agriculture have been seen as a positive response to limit both low-input, traditional agriculture and intensive modern agriculture (relying on high levels of inputs for crop production). Sustainable agriculture relies on practices that help to maintain ecological equilibrium and encourage natural regenerative processes. Agricultural systems relying on such approaches are not only able to support high productivity, but also preserve biodiversity and safeguard the environment. Conservation agriculture has come up as a new paradigm to achieve goal of sustained agricultural production. It is a major step toward transition to sustainable agriculture.

While conventional agromet advisories have played a crucial role in informing agricultural practices, their inherent broad-scale nature often falls short of addressing the nuanced realities of modern farming. For instance, rainfall predictions at a district level can mask significant variations at the farm or even field level due to local topography, soil types, and microclimatic conditions. Similarly, generic recommendations for irrigation scheduling or fertilizer application may not align with the specific needs of different crop varieties, growth stages, or soil moisture retention capacities within a farm. This lack of granularity can lead to inefficient resource utilization, sub-optimal application of inputs, and increased vulnerability to localized weather events, ultimately impacting productivity and profitability.
9.1. Key Drivers for the Emergence of PAAS
Several converging factors are propelling the shift towards precision in agrometeorology:
• Escalating Climate Variability: The increasing frequency and intensity of extreme weather events, coupled with long-term shifts in climate patterns, demand more adaptive and localized strategies. Farmers need precise and timely information to make informed decisions in the face of unpredictable weather.
• The Imperative for Sustainability: Sustainable agricultural practices necessitate the efficient use of resources like water, fertilizers, and pesticides. PAAS can contribute significantly by providing targeted recommendations that minimize waste and environmental impact.
• Technological Advancements: The rapid development and increasing affordability of various technologies are making PAAS a reality. These include:
• Remote Sensing: Satellite and drone-based imagery provide highresolution spatial data on crop health, soil moisture, and other critical parameters.
• Internet of Things (IoT) Sensors: Networks of sensors deployed in fields can continuously monitor local weather conditions, soil properties, and plant physiological parameters.

2.1 Introduction

Biomass store solar energy in the chemical form and it is most precious and versatile resources on earth. Biomass, unlike fossil fuels, is a renewable energy resource that is available where the climatic conditions are favorable for plant growth and production¹. The term biomass is used for all organic materials which are combustible in nature, mainly plant and animal origin present in land and aquatic environments. Biomass is considered carbon neutral, because the amount of carbon it can release is equivalent to the amount it absorbed during its life time. There is no net increase of carbon to the environment in the long term when combusting the lignocellulosic materials. Therefore, we can say that biomass is a renewable source of energy and can play vital role in responding to concerns over the protection of the environment and the security of energy supply^2,3.

Biomass energy accounts for about 15% of the world’s primary energy consumption and about 38% of the primary energy consumption in developing countries⁴. Furthermore, biomass often accounts for more than 90% of the total rural energy supplies in developing countries⁵. It is the main source to meet out domestic energy in developing countries⁶. The efficient use of fuel wood is much more eco-friendly than the use of efficient and conventional fuels like kerosene and liquefy petroleum gas (LPG). LPG emits 15 times more CO₂ per kg than wood, and kerosene emits nearly 10 times as much. CO₂ is the prominent candidate for global. It is commonly assumed that biomass fuel cycles based on renewable in nature and greenhouse-gas (GHG) neutral because the combusted carbon in the form of CO₂ is soon taken up by re-growing vegetation⁷.

Conservation Agriculture (CA) is an agro-ecological approach for sustainable crop production and intensification. CA comprises the resource conserving agricultural production practices that aim to achieve more produce at less cost while enhancing the quality of the natural resource base. CA is all about providing multiple options for farmers, endowed differentially. The basic components of CA include drastic reduction in tillage, adequate retention of crop residues on the soil surface, use of economically feasible diversified crop rotations, avoidance of freewheeling and practice of controlled traffic, if possible. These elements of CA are not site-specific but represent unvarying objectives that are practised to extend CA technologies efficiently across all production conditions. No-till agriculture is considered as a revolutionary step in the direction of preventing land degradation and rehabilitation of the resilient but fragile lands. No-till agriculture together with other associated management practices such as direct seeding into loose crop residues to provide soil cover and to conserve soil moisture, judicious choice of crop rotations and agro-forestry tree species constitutes CA. CA is thus being widely accepted as an important component of the overall strategy for enhancing productivity, improving environmental quality and preserving natural resources for food security and poverty alleviation in such areas.  Recent CA trials conducted in Karnataka, Andhra Pradesh and Tamil Nadu seem to bring out that the rainfed tropical India stands to benefit more from CA than the irrigated areas.

1.1. Background Introduction

We live in a world with “throw-away” societies that are involved in a pattern of consuming packaged products that don’t even last past a single use or even a year and discarding the waste. This lifestyle generating waste is negatively impacting public health, environment and imposing socio-economic problems on us. The waste is continuously consuming our land, resources, and energy for storage, management, treatment, and disposal. Solid waste was an urban issue initially but has reached every corner nowadays. 

Introduction

Carbon on earth is stored primarily in rocks and sediments. Only a tiny fraction resides in mobile reservoirs – the atmosphere, oceans, soil and terrestrial biosphere – to play a vital role in biological, physical and chemical processes at the earth’s surface. The small fraction of C present in the atmosphere as CO₂ is especially important, as its abundance is a major regulator of the climate of the planet. The rapid increase in atmospheric concentrations of CO₂ over the past 150 years, reaching current concentrations of about 380 ppm, corresponds with combustion of fossil fuels since the beginning of the industrial age. Conversion of forest lands to agricultural use also redistributed C from plants and soils to the atmosphere and altered ecological balance through physiological effects on vegetation. The understanding of C sources and sinks has advanced enormously in the last decade. However, we cannot yet quantitatively define the global effects of human activities such as agriculture and forestry on climate change. An understanding on the long-term changes in atmospheric concentration will help enhance understanding on how the earth’s climate will evolve in future.

Weather and climate have profound influence on agriculture of a region. There are some differences between these two terms. Weather describes the state of the lower atmosphere of a place with respect to temperature, precipitation, wind direction, wind speed, humidity, cloudiness and pressure etc. over a short period of time. The short term variations over minutes to days are indicated as weather of a location. It says whether the atmosphere is hot or cold, rainy or dry, sunny or cloudy, still or cyclonic and so on usually for period of 24 hours. The weather may vary from place to place and from time to time due to difference in temperature, cloudiness, humidity, rain and other events of atmosphere. It may be sunny at one locality, but rainy at another locality.

1. Introduction
One of the foremost environmental challenges the world faces today is airpollution. As industrialisation, urbanisation, and transportation continueunabated, harmful substance levels in the atmosphere have becomealarmingly high (Thanvisitthpon et al., 2024). This general contamination inthe air is not just a serious risk to humanity but also harms ecosystems whilcontributing to global climate change. Controlling airpollution has becomea critical necessity at this stage, with the need for innovative solutions inthis respect. Bioremediation is one of the innovative solutions, where certainmicroorganisms break down or neutralise pollutants in the air.

1. Introduction
1.1. The Growing Problem of Pesticide Pollution
Pesticides are used in very great amounts in agricultural production for theprotection of crops against pests, diseases and weeds. They are also veryinstrumental in boosting agricultural productivity by ensuring food securityand preventing losses that may be caused by outbreaks of pests (Popp et al.,2013). However, the extensive use of pesticides has generally resulted in hugeenvironmental concerns. Improperlymanaged pesticide residues may remainin soil, water and even air for many years and create severe ecological andhealth hazards in the long run (Zhang et al., 2024). This widespread existenceof pesticides in the environment has raised a serious alarm concerning theiradverse impacts on biodiversity, soil fertility and quality of water, furtherbioaccumulation in the food chain that affects wildlife and human populations(Aktar et al., 2009).

The extreme weather events of the present day and the expected future climate scenarios at global and regional scales have been attributed to the changes in the atmospheric chemical composition and the massive amounts of greenhouse gases (GHGs) emitted by humans since the industrial revolution, bringing about the global warming and resulting in Climate Change. Further, the natural disasters like flash floods are attributed to the highly conspicuous human interventions with nature – the earth and its atmosphere. The parody of the situation is that, while the GHGs sourcing countries are mainly the developed ones, the sink of the result are the agrarian-dominated and eco-sensitive economies of the tropics. Invariably, tropical regions are to be affected the most, because, on the one hand the general circulation of the atmosphere directly and naturally causes divergence of the polluted air from extra tropical regions towards tropics, while on the other, the industrialization within the tropical regions too would affect the local atmosphere. Karnataka State, being located well within the tropics, can be truly impacted by the climate change caused by anthropogenic sources and it is demarcated into 10 agroclimatic zones (Fig. 9.1) based on crops, soils and climate. Climate experts have warned that Karnataka is likely to be more vulnerable to climate change than other states in India.

Key words : Groundwater Modelling, GIS, PMWIN, ArcInfo Interface Con2grid, Interface Programme, ArcMacro Language.

Introduction

Groundwater is an important source of irrigation in India and has played a major role in increasing the food production. About 50 per cent of total irrigated area in the country is dependent on groundwater (Central Water Commission (CWC), 2000). Productivity of groundwater is normally more than the surface water due to the fact that it is available at the point of use, requires minimum conveyance infrastructure, is available on demand and maximizes the application efficiency. However, in past few years, excessive and unplanned groundwater pumping in certain parts of the country has resulted in depletion of groundwater resources. Water table in these region is going down day by day and making it beyond the reach of poor farmers. Therefore, keeping the water table in the desirable range is a major concern. This can be achieved by adopting proper pumping rate and pumping schedule. Groundwater modelling has successfully been used for deciding the pumping rate and pumping schedule. Groundwater modelling refers to simulation of groundwater behaviour under varying pumping and recharge conditions. A groundwater model is simply a set of equations, which describe the physical processes active in the aquifer subjected to certain assumptions. While the model itself obviously lacks the detailed reality of the groundwater systems, the behaviour of the validated model approximates that of the aquifer.

Soil Erosion As a Process
 
Soil erosion is a three stage process, namely (1) detachment, (2) transport, and (3) deposition of soil. Different energy source agents determine different types of erosion. There are four principal sources of energy: physical, such as wind and water, gravity, chemical reactions and anthropogenic, such as tillage. Soil erosion begins with detachment, which is caused by break down of aggregates by raindrop impact, sheering or drag force of water and wind. Detached particles are transported by flowing water (over-land flow and inter-flow) and wind, and deposited when the velocity of water or wind decreases by the effect of slope or ground cover. Processes like dispersion, compaction and crusting, accelerate the natural rate of soil erosion. These processes decrease structural stability, reduce soil strength, exacerbate erodibility and accentuate susceptibility to transport by overland flow, interflow, wind or gravity. These processes are accentuated by soil disturbance (by tillage, vehicular traffic), lack of ground cover (bare fallow, residue removal or burning) and harsh climate (high rainfall intensity and wind velocity).

In order to achieve maximum and sustainable crop production from available farm resources, it is essential to have proper knowledge of the agro-climatic resources of the location/region. Therefore, a thorough understanding of the climatic conditions would help in determining the suitable agricultural management practices for taking advantage of the favorable weather conditions and avoiding or minimizing risks due to adverse weather conditions. better planning of cropping pattern, developing irrigation and drainage plans for an area (Chaudhary et al. 2015). Hence, trends of temperature and rainfall are studied in this section with possible impact studies on rice production for Chhattisgarh state. Challenges of rainfed rice production can be understood through trend studies of key weather variables. Analysis of rainfall in the context of rainfed rice production in Chhattisgarh state has been carried out. Analysis has been done at Department of Agrometeorology under All India Co-ordinated Research Project (Raipur) to characterize the key weather parameters statistics.

In this chapter, an attempt is made to emphasize the fact that while no country in the World is safe from geohazards, a proper understanding on their causes, ways to mitigate them and surviving techniques would help reduce the life and property loss. Each geohazard has its own characteristic way of potential impact and hence classifying vulnerability of different regions and creating awareness on potential impact is essential. In addition to providing basic information on geohazards, this chapter presents a conceptual model on hazard mitigation, rescue and relief operations.

INTRODUCTION

Every year, thousands of people are killed by volcanic eruptions, earthquakes, landslides and floods. These natural causes damage human settlements and infrastructures (GOI, 2004) inflicting life and economic loss. As human population increases, habitation on hazardous and or vulnerable land becomes more common and the risks posed by these hazards increase. The need to observe their behavior, understand them better and mitigate their effects become ever more urgent (IGOS, 2003). Decades of research may have contributed towards betterment of our understanding on the processes of geohazard formation but still a long way has to be covered to develop better mitigation procedures.