eChapters

Introduction

India’s textile sector is one of the oldest industries in the Indian economy, dating back several centuries. The industry is highly varied, with hand-spun and hand woven textiles sectors at one end of the spectrum and the capital-intensive sophisticated mill sector at the other. The fundamental strength of the textile industry in India is its strong production base of a wide range of fiber/yarns, from natural fibers like cotton, jute, silk, and wool, to synthetic/man-made fibers like polyester, viscose, nylon, and acrylic.

1-1. Identify the current state of environmental policies in Indian agriculture and the challenges faced in their effective implementation.

1-2. Evaluate the importance of implementing environmental policies and management systems in Indian agriculture to ensure sustainable development.

1-3. Analyze key international standards, such as ISO 14001 and EMAS, and how they can be applied in the context of Indian agriculture.

1-4. Compare and contrast best practices and case studies of companies and organizations that have successfully implemented environmental policies and management systems in Indian agriculture to draw insights and lessons learnt from them.

Abstract

A majority of the plants studied in natural ecosystems are symbiotic with microorganisms that either reside entirely (endophytes) or partially within plants. These microorganisms express different associations ranging from mutualism to parasitism. These symbiotic relationships appear to impart tolerance to various types of abiotic stresses such as heat, drought, salinity, heavy metals, etc. and sometimes may be responsible for the survival of both plant hosts and microbial symbionts in high stress habitats. The amelioration of the abiotic stresses by the endophytes assumes increasing significance in the light of rapidly changing global climate, which is likely to face frequent incidences of extreme weather conditions like high temperature, droughts, etc.

According to the Indian economic survey of 2018, more than 50% of the Indian workforce is employed in the agricultural sector. Agriculture contributed to 17–18% to the country’s GDP. Agriculture’s share in India’s economy is less compared to the industrial and services sectors. The industrial and service sectors have higher growth rates. The significance of the agricultural sector in India’s economic and social growth goes well beyond. Nearly 60% of India’s families depend on rural incomes. In addition to this, the majority of India’s poor population (around 70 %) lives in rural areas. Also, as the population is growing at a fast rate, food security in India depends on producing cereal crops and in increasing the production of fruits, vegetables and milk to sustain the needs of a growing population. To achieve this we need a productive, diversified, competitive, and sustainable agricultural sector. India is the world’s largest producer of pulses, spices and milk. It has the world’s largest cattle herd and the largest area under wheat, rice, and cotton. India is also the second largest producer of rice, wheat, cotton, sugarcane, farmed fish, sheep & goat meat, fruit, vegetables and tea.

Abstract

Drought and salinity are two major abiotic stresses that affect various aspects of human lives of one third world population including human health and agricultural productivity. Abiotic stresses such as salinity, drought, nutrient deficiency or toxicity, and flooding limit crop productivity world-wide. A living organism is considered resistant if it tolerates a given physicochemical stress. The presence of microorganisms within the soil, specially a main group known as arbuscular mycorrhizal fungi (AMF), is a key factor in the adaptation of plants to the different ecosystems. The AMF colonizing within the plant roots can determine the success of plants in salt- and/or drought-affected areas. The symbiosis with AMF has been proposed as one of the mechanisms of salinity and water stress avoidance. Studies have shown greater drought and salinity tolerance in AMF-colonized plants by a number of mechanisms. These mechanisms include enhanced water and nutrient uptake directly by extraradical hyphae, higher leaf stomatal conductance and/or better root system architecture, higher capacity of osmotic adjustment and antioxidant defense systems, better soil structure due to higher glomalin and over expression of genes encoding antioxidant enzymes.

Abstract

Contamination groundwater and soil due to heavy metals (HMs) has aggravated into a threat not only for people inhabiting the polluted areas but also for the vegetation of the region. Relying on the use of obligate symbionts, arbuscular mycorrhizal fungi (AMF) in remediation of contaminated sites can be a productive approach. These fungi due to high cation exchange capacity have the ability to adsorb heavy metals (HMs) on fungal tissues; they also possess enzymes responsible for reduction of metals to less toxic forms. In areas with high toxicity of various HMs such as lead, AMF extends its extraradical mycelium (ERM) beyond the depletion zone of plant roots increasing the availability of nutrients such as potassium, phosphorus, magnesium, and sulphur resulting in increased plant growth and yield. Production of phenol and organic acids by the fungus have been reported to increase iron diffusion, that is a co-factor for antioxidant enzyme superoxide dismutase. AMF sequester HMs in fungal structures and bind them in their chitin cell walls preventing their translocation to aerial plant parts.

Introduction

In recent decades, integrating trees with crops for food and wood production has received considerable attention in both tropical (Garrity et al., 2010) and temperate regions (Palma et al., 2007). The growing of trees in combination with the agricultural crop is a land management practice that farmers have been practicing since the ancient period. Seasonal agricultural/horticulture crops, woody perennial trees (multipurpose), and/or animals are major components of various agroforestry systems. According to Sanchez (1995), the science of agroforestry revolves around four aspects: competitiveness, complexity, sustainability, and profitability, and all of these factors must be balanced in order to produce beneficial outcomes. In fact, agroforestry is significantly assisting in meeting the United Nations Millennium Development Goals (MDGs) such as poverty and hunger eradication, improved health, nutrition, and education for people, gender equality, and environmental sustainability, particularly in developing countries (Garrity, 2004, 2006).

Introduction

Agroforestry being old as an art and new in its scientific terms has been gaining importance in the modern era due to shift of world from technology to nature in search of resilient way of sustaining livelihood (Dutta et al., 2023, Sharma et al., 2023 Bishaw et al., 2022, Agnoletti et al., 2022). The simplicity of the agroforestry system is the flagship reason of its widespread applicability and reliability in agricultural domains. There has been change in the world perspective regarding the nature and natural resources in recent times. Although there has been forest over 31 per cent of the world’s total geographical area (FAO and UNEP, 2022) but the stabilization of ecosystem and sustainable development is difficult without subsequent interaction between the tree, crop and livestock component on farm lands, being collectively called as agroforestry.

Introduction

Developing means of farming and agriculture is the reason humans can live in the world today. It is a necessary means of survival, without which there would be famines all over the world. For thousands of years, agriculture was a natural process that did not harm the land it was done on. In fact, farmers were able to pass down their land for many generations, and it would still be fertile as ever.

However, modern agricultural practices have started the process of agricultural pollution. This process causes the degradation of the ecosystem, land, and environment due to the modern-day by-products of agriculture.

Abstract

Amongst various oilseed crops grown across the world, soybean (Glycine max L. Merrill) is globally important as a high source of protein and oil for human consumption and is also being used as potential feed for animals. Soybean is grown under rain-fed conditions in the tropics and subtropics in the marginal lands with less amount of external application of chemical fertilizers. The frequent climate variations have created a number of biotic and abiotic stresses, drought being a major abiotic stress which adversely affects the soybean productivity. Thus, to enhance the productivity of soybean, besides managing the nutrients, stress management is of utmost importance. There is a great opportunity of application of microbes especially arbuscular mycorrhizal fungi (AMF) where its application alone or in combination with plant growth promoting rhizobacteria (PGPR) can help in nutrient mobilization and remediation of plant stresses.

Abstract

The Tamil Nadu is one of the leading states in groundwater development. Since the surface water resources have been fully exploited for irrigation, the groundwater is massively mined for agriculture, domestic and industrial purposes. The paper provides a synthesis of whole groundwater related issues including basin wise groundwater conditions, the aquifer types, geogenic water quality and quality deterioration due to anthropogenic activities, need for recharge, the utility of Remote Sensing & GIS etc. The paper has come out with set of recommendations as the concluding remarks.

This chapter reviews the research work done in the fields related to the objectives of the study. In any scientific investigation or research a comprehensive review of relevant literature is very essential. Its main function apart from determining the work done before concerning the problem area i.e. area of investigation, it provides an insight into the methods and procedures and create a basis for interpretation of findings. As direct references on all the item are not in abundance, certain specific references along with some indirect references have been incorporated this chapter for the purpose of meaningful use.
2.1. Ecosystem Services and Conservation Agriculture
Acharya, S. K. and Chatterjee, R. (2019) found that conservation agriculture may help in re-building agro-ecology by maintaining carbon sequestration, maintaining soil health, checking soil erosion and ground water depletion, energy balance, mitigating climate change related problems through maintaining ecosystem services.
Ayyam, V., Palanivel, S., and Chandrakasan, S. (2019) stated that CA embraces higher rates of carbon sequestration, organic matter accumulation, soil erosion reduction, and its associated improvement in soil biological properties. Additionally, there is reduction in greenhouse gas emission as a result of CA. Adoption of CA-based farming practices particularly in areas facing notable land degradation and depleting natural resources delineates a win-win scenario due to improved crop yield and trends of increasing soil fertility and scope for climate change adaptation to recuperate degraded soils and improve ecosystem services.

Introduction

Persistent use of conventional farming practices based on extensive tillage, especially when combined with removal or in-situ burning of crop residues, has magnified soil erosion losses and swiftly degraded soil resource base. One of the glaring examples for the aforementioned statement is the ‘Dust Bowl’ in the U.S during 1930s in Great plains, where 91 M ha of land was degraded by severe soil erosion (Hobbs, 2007).

One of the primary challenges of our time is to feed growing and more demanding world population with reduced external inputs and minimal environmental impacts (nature paper). Conservation Agriculture (CA) is a set of management practices for sustainable agricultural production without excessively disturbing the soils, while protecting it from the processes of soil degradation like erosion, compaction, aggregate breakdown, loss of organic matter, leaching of nutrients, and processes that are accentuating due to anthropogenic interactions in the presence of extremes of weather and management practices. The organic materials conserved through this practice are decomposed slowly, and much of materials are incorporated into the surface soil layer, thus reducing the liberation rate of carbon as CO₂ into the atmosphere. In the total balance, carbon is sequestered in the soil, and turns the soil into a net sink of carbon. So, CA enhance soil health by improving soil aggregation, reducing compaction through promotion of biological tillage, increasing surface soil organic matter and carbon content, and moderating soil temperature and weed suppression. CA reduces cost of cultivation, saves time, increases yield through timelier seeding/planting, reduces pest and diseases through stimulation of biological diversity, and reduces green house gas emissions.

Machinery development, refinement and adoption for a range of soil and cropping situations will be fundamental in any success to promote conservation agriculture practices. Agricultural machinery or tools, which support conservation agriculture generally refer to the cultivation systems with minimum or zero tillage and in-situ management of crop residues. Minimum tillage is aimed at reducing tillage to the minimum necessary that would facilitate favorable seedbed condition for satisfactory establishment of crop. Zero tillage is however an extreme form of minimum tillage. With the development of direct drilling machines, almost all research work was attempted to define the responses of direct-drilled seeds in relation to soil micro-environments. Different designs of direct drilling machines viz. zero till drill, no till plant drill, strip till drill, and rotary slit no till drill have been developed with controlled traffic measures for energy efficient and cost-effective seeding of crops without tillage. In this paper various issues, challenges and prospects of conservation agriculture in India has been discussed.

Introduction

Modern intensive agriculture systems based on the principles of yield maximization have been plagued with multiple constraints such as declining factor productivity, decreasing resource use efficiency (fertilizers, water, labour etc.), soil organic matter decline, salinization, soil structure degradation, water and wind erosion, reduced water infiltration rates, soil compaction due to surface sealing and crusting, declining ground water table, pest and disease outbreak, weed resistance and weed shifts (Paustian et al., 2016). To address these overwhelming issue, conservation agriculture (CA) has been defined by FAO as a concept of resource saving agricultural crop production which is based on enriching the natural and biological processes above and below ground. The major purpose for its advancement is to reduce the production cost, save resources, enhance yields and utilize resources like nutrient and water efficiently. Conservation tillage denotes soil management system that follows the principle of at least 30% of the soil surface coverage with crop residues after seeding of the crop (Jarecki and Lal, 2003). CA, a resource-efficient agriculture helps to conserve, improve and utilize natural resources efficiently through integrated management of available soil, water and biological resourwces combined with external inputs and thus contributes to environmental conservation as well as enhanced and sustained agricultural production in the long term. The practice and wider extension of conservation agriculture thus requires a deeper understanding of its ecological underpinnings for managing its various elements for sustainable intensification.

Introduction

Organic farming is basically a holistic management system, which promotes and improves the health of the agro-ecosystem related to biodiversity, nutrient biocycles, soil microbial and biochemical activities. Organic and bio-dynamic farming emphasises management practices involving substantial use of organic manures, green manuring, organic pest management pratices and so on. It has also come to mean that it is a system of farming that prohibits the use of artificial fertilisers and synthetic pesticides.

Biodynamic agriculture is an advanced form of organic farming system that is gaining increasing attention because of its added advantage of soil health and food quality. It is an alternative variant where the chemical fertilisers are totally replaced by microbial (biological) nutrient givers such as bacteria, algae, fungi, mycorhiza, actinomycetes. Biological Pest management of crops is undertaken by employing predators, parasites and other plethora of natural enemies of pests, in addition to all the rest of option that help to avoid resorting to chemical pesticides. These agents could be augmented into farms or promoted through such activities that favour their flourished activities. Composting, Green manuring, crop rotations. Intercropping, mixed cropping etc. as well as bird perches, trap crops promote such biological activities.

Abstract

Quality of water is affected by natural and man induced contamination to groundwater system. Area chosen for study has gained its own importance due to the location of two lignite mines and a Thermal power plant in operation. Extensive large scale pumping of water is done for lignite mining. The mine drainage and drainage from thermal power plant along with agricultural return flow from lignite charged waters increases the severity of problem. In order to achieve a panacea for the above-mentioned situation, the study has incorporated and integrated in all related factors to get a meaningful interpretation for groundwater quality and quantity management in and around Neyveli area. The frequent failure of monsoon has added to the existing problem of over exploitation. To attain a panacea for water chemistry groundwater samples were collected for four different seasons. Higher EC and TDS values are observed in Southeast and Southwest part of the study area. In Southwest monsoon and Summer seasons HCO₃Cl dominates the anions, with few representations for SO₄. In Northeast monsoon and Post monsoon season Na + K – Ca + Mg is the dominant. Thermodynamic, studies reveal that groundwater of the region are stable with Kaolinite stability field in all the silicate systems. Bicarbonates derived from silicate mineral weathering are noted in the NW, Northern and in the mining region. These regions are located in the NW and NE part of the study area. Comparison of water quality to standards shows that the water can be used for drinking and for irrigation purposes except in few locations.

Nanotechnology epitomizes one of the most dynamic and transformative fields in modern science and technology. This multidisciplinary domain bridges chemistry, physics, biology, along with engineering, enabling the creation of materials and devices with extraordinary properties and applications. The book chapter reflects the research and patenting trends in nanotechnology. USA leading the global share for most patents granted followed by South Korea, Japan, China and Germany for the top five spots contributing more than 76% of all the granted patents by EPO & USPTO related to nanotechnology. Nanotechnological products in relation to sub-industrial areas of medicine, food, agriculture, cosmetics, environment, and renewable energies are also highlighted in chapter. 

Introduction 
The demand for alternative energy sources is on the rise as a result of global apprehensions regarding the swift exhaustion of fossil fuels, escalating energy usage, and significant environmental challenges (Lijó et al. 2019). Microalgae are regarded as highly favorable raw materials for upcoming energy sources, thanks to their various advantages, including rapid growth rates, elevated lipid contents and resistance to a variation of pH, temperature, light intensity, and salinity (Goswami et al. 2022; Zhang et al. 2022; Wang et al. 2019; Das et al. 2011). As per a recent evaluation of the lipid production efficiency of microalgae biomass, numerous nations could derive their transport fuel (~30%) from microalgae biomass grown on non-agricultural areas (Moody et al. 2014). Apart from their higher lipid production efficiency in contrast to earthly raw materials, microalgae consist of lipids, polysaccharides, pigments, proteins, and nucleic acids, making them versatile raw materials for a range of finalized outcomes, including nutrients, pharmaceuticals, biofuels, and bioplastics (Tang et al. 2020; Kim et al. 2016; Moody et al. 2014; Sharma et al. 2011). Additionally, microalgae are appealing for their efficient sequestration of CO2 during photosynthetic growth (Vargas-Estrada et al. 2020). In contrast to landbased oilseeds, microalgae can be cultivated in freshwater and contaminated or saline locations, eliminating the requirement for substantial nitrogen fertilizer application (Sharma et al. 2022; Rashid et al. 2019; Lam and Lee 2012). The positive attributes of microalgae as raw materials have prompted substantial research endeavours aimed at the commercialization of microalgal biofuels. Regrettably, microalgal biorefineries continue to encounter various technological and economic challenges (Khoo et al. 2020). In essence, nanotechnology involves the invention, creation, and utilization of resources at the nanoscale. Precisely, nanomaterials engineering explores the synthesis and designing of artificial or adorned nanoparticles to drive technological progress and enable applications that would otherwise be impractical. Nanomaterials possess surface areas hundreds of times greater than their weights, significantly enhancing their physico-chemical attributes (Husen and Siddiqi 2014; López-Serrano et al. 2014). Currently, nanotechnology-driven developments, with diverse potential features, have emerged as a burgeoning trend in various industries, including drug delivery, food industry, catalysis, coatings, agriculture, bioremediation, cosmetics, and materials science (Malik et al. 2023). Nanoparticle engineering offers practical and potential solutions to address the problems that arise at different phases of the microalgal biorefinery procedure. For instance, diverse nanomaterials have been proposed as ways to enhance transformation efficacy and the quality of green diesel. The distinctive capabilities of nanoscience and nanomaterial engineering exert a substantial impact on the commercial feasibility of microalgae derived products, including bioactive compounds, oils, lipids, and biofuels (Kumar et al. 2020; Milano et al. 2016). Nanoparticles have the capacity to boost intracellular fatty acid synthesis and complete microalgal biomass, leading to substantial reductions in production expenses. The presence of nanomaterials enhances the efficiency and speed of the microalgae harvesting, and the recoverability and reusability of these materials contribute to improved production efficiency.

Abstract

Coastal aquifers are the sources of freshwater which are being over extracted due to increase in population, agriculture and industrial activities. This over exploitation has resulted in decline in groundwater level and intrusion of sea water into the coastal aquifers making it unfit for human utilities. An attempt has been made in the coastal tracts of Pondicherry region using Electrical resistivity imaging. The survey has been attempted in six locations spread thought the study area and the interpretation has been attempted by RES2DINV software. The profile length attempted was between 150 to 300 m with electrode spacings between 5 to 10 m. The apparent resistivity ranges between 0.1 to 1183 & ohm. Sea water intrusion was prominent along the northern parts of the study area and lower resistivity isolated in kirumambakkam has been interpreted as salinity due to the presence of clay minerals. In nallavadu saline intrusion has been identified at shallow depth.

1. Background
The growing global population, industrialization, and urbanization have driven rising energy demand, with primary energy use increasing by 5.8% in 2024 (BP Statistical Review of World Energy 2024). The need for secure, affordable, and low-carbon energy is critical due to fossil fuel depletion, global warming, and geopolitical tensions. Clean energy sources like solar, wind, and biofuels are being explored, with biodiesel standing out as the only biofuel capable of fully replacing fossil fuels (Aizouq et al., 2020). Many countries, including India and China, are advancing biofuel production, with the latter viewing it as a key to energy security. Biofuels, derived from various sources like algae, crops, and waste, include biodiesel, bioethanol, and biogas. They are categorized into four generations based on feedstock. First-generation biofuels, made from edible materials, face food vs. fuel competition. Second-generation biofuels from non-edible sources are more sustainable but still face resource limitations (Lv et al., 2019). Thirdand fourth-generation biofuels from microalgae offer higher yields and better land use, with species like Chlorella vulgaris and Nannochloropsis oceanica showing promise for biodiesel production. Microalgae’s fast growth and efficiency have led to advances in biodiesel production, although challenges remain, such as species selection and production scale-up (Arora et al., 2021). But there is a constraint for commercial availability of these biofuel which are the economic and environmental obstacles that are creating problematic condition for approval and use of genetically engineered microalgae for their potential to enhance lipid yields. This chapter delves into the current opportunities and challenges in microalgae biofuel production, focusing the need for regular research and innovation (Maliha and Abu-Hijleh 2022).
2. Choosing the Different Classes Of Microalgal Strains
The achievement of huge-scale microalgal culture relies on picking appropriate species. The production of various lipids greatly affects the selection of strains and biofuel properties. For the biodiesel, Triacylglycerol (TAG) is the preferred lipid but compared to green algae its content is typically low in cyanobacteria. with the average lipid content of 25.5%, green algae (Chlorophyceae) stand as the largest class of oleaginous microalgae, which can rise under nutrient stress (Saini et al., 2021). Also, the biomass productivity is equally important for high lipid productivity as high lipid content is beneficial. For biodiesel production, strain selection should focus on both lipid content and biomass. Chromochloris zofingiensis shows the highest lipid productivity among all classes of green algae. The saturated (SFA) and monounsaturated fatty acids (MUFA) fatty acid (FA) being dominant, their composition also plays a vital role in biodiesel quality. It has seen those high levels of C16:0 and C18:1 in microalgae is ideal for biodiesel production (Bharti et al., 2021). Therefore, for improved biodiesel performance, strain selection should consider both lipid productivity and FA composition (Bagchi and Mallick, 2016).