eChapters

Introduction

A geographic information system or geographical information system (GIS) is a system designed to capture, store, manipulate, analyze, manage, and present all types of spatial or geographical data. The acronym GIS is sometimes used for geographic information science (GIScience) to refer to the academic discipline that studies geographic information systems and is a large domain within the broader academic discipline of geoinformatics. What goes beyond a GIS is a spatial data infrastructure, a concept that has no such restrictive boundaries. In a general sense, the term describes any information system that integrates stores, edits, analyzes, shares, and displays geographic information. GIS applications are tools that allow users to create interactive queries (user-created searches), analyze spatial information, edit data in maps, and present the results of all these operations. Geographic information science is the science underlying geographic concepts, applications, and systems.

GIS is a broad term that can refer to a number of different technologies, processes, and methods. It is attached to many operations and has many applications related to engineering, planning, management, transport/logistics, insurance, telecommunications, and business. For that reason, GIS and location intelligence applications can be the foundation for many location-enabled services that rely on analysis and visualization. GIS can relate unrelated information by using location as the key index variable. Locations or extents in the Earth space–time may be recorded as dates/times of occurrence, and x, y, and z coordinates representing, longitude, latitude, and elevation, respectively. All Earth-based spatial–temporal location and extent references should, ideally, be relatable to one another and ultimately to a “real” physical location or extent. This key characteristic of GIS has begun to open new avenues of scientific inquiry.

Applications of Remote Sensing

The era of satellite remote sensing was open in the 1960s when cameras and electronic sensors were mounted on spacecraft. Nowadays there is a big assortment of satellite systems actively recording information about the Earth. A wide variety of imagery is available from satellites. Both active and passive sensors, operating from the microwave to the ultraviolet regions of the electromagnetic spectrum collect a large amount of information about the earth’s surface every day. Each of the systems vary in terms of their spatial, spectral, radiometic and temporal resolution. Those characteristics play an important role in defining which applications the sensor is best suited for. The main benefits of satellite remote sensing are the following:

1.1     Forest Resources
    
1.2     Uses of Forest
    
1.3     Deforestation and its Effects
    
1.4     Water Resources
        
    1.4.1 Water Conflicts
    1.4.2 Dams Conflicts
    
1.5    Drought
    1.5.1 Regions of Drought in the World
    1.5.2 Effects of Drought
    
1.6     Flood
    
1.7    Environmental Effects of Mineral Resources
    
1.8    Food Rseources
    1.8.1 Technological Improvements in Food Production
    1.8.2 Environmental Issues Related to Increased Production
    
1.9    Overgrazing and its Effects
    
1.10    Impacts of Intensive Farming on Soil and Water Resources
    
1.11    Effects of Agricultural Chemicals on the Environment
    
1.12    Energy Sources
    
1.13    Waterlogging
    
1.14    Land Resources
    
1.15    Land Degradation
    
1.16    Soil Erosion
    1.16.1 Types of Erosion
    
1.17     Desertification
    1.17.1 Causes of Desertification
    1.17.2 Effects of Desertification
    
1.18    Conservation of Natural Resources
    1.18.1 Conflicts
    1.18.2 Challenges and Methods

2.1    Ecosystem
    2.1.1 Major Components of Ecosystems
    2.1.2 Energy and Matter Flow in Ecosystems
    2.1.3 Various Types of Ecosystems
    
2.2    Biodiversity
    2.2.1 Genetic Diversity
    2.2.2 Species Diversity
    2.2.3 Ecosystem Biodiversity
    2.2.4 Values of Biodiversity
    2.2.5 Threats of Biodiversity
    2.2.6 Endangered and Endemica Species of India
    2.2.7 Biodiversity Conservation

3.1    Air Pollution
    3.1.1 Classification of Air Pollutants
    3.1.2  Properties of Air Pollutants
    3.1.3  Health Effects
    3.1.4 Particulate Pollution Control Equipments
    3.1.5 Gaseous Pollution Control Equipments
    
3.2    Water Pollution
    3.2.1 Causes of Pollution
    3.2.2 Origin of Wastewater
    3.2.3 Waste Water Composition
    3.2.4 Types of Water Pollutants
    3.2.5 Basic Processes of Water Treatment
    
3.3    Land
    
3.4    Marine Pollution
    3.4.1 Sources and Effects of Marine Pollution Toxics
    3.4.2 Control Measures
    
3.5    Noise
    3.5.1 Effects of Noise
    3.5.2 Major Noise Sources
    3.5.3 Noise Control Measures
    
3.6    Thermal Pollution
    3.6.1 Effects of Thermal Pollution
    
3.7     Nuclear Hazards
    3.7.1 Nuclear Weapons
    3.7.2 Types of Nuclear Bursts
    3.7.3 Nuclear Injuries
    3.7.4 Residual Radiation
    
3.8    Nuclear Waste and their Treatment
    
3.9    Solid Waste Management
    3.9.1 Role of Human in Prevention of Pollution
    
3.10    Disaster Management
    3.10.1 Floods
    3.10.2 Earthquake
    3.10.3 Cyclone
    3.10.4 Landslides

4.1    Urban Issues
    
4.2    Environmental Ethics - Issues and Possible Solutions
    
4.3    Water Conservation
    4.3.1 Rainwater Harvesting
    
4.4    Greenhouse Gases and their Sources
    4.4.1 Climate Change
    4.4.2 Global Warming
    4.4.3 The Greenhouse Effect
    4.4.4 Consequences of the Greenhouse Effect
    4.4.5 Acid Rain, 176
    
4.5    Ozone Layer Depletion
    
4.6    Nuclear Accidents
    
4.7    Waste Reclamation
    
4.8    Consumerism and Waste
    
4.9    Forest (Conservation) Act 1980
    
4.10    Wildlife Protection Act
    
4.11    The Air  (Prevention and Control of Pollution) Act 1981
    
4.12    Water (Prevention and Control of Pollution) Act 1974
    4.13    The Environment (Protection) Act, 1986
    4.14    Environmental  Laws

5.1    Population Growth
    
5.2    Exponential Growth
    
5.3    Population Explosions
    
5.4    Over Population
    
5.5     The Causes of Rapid Population Growth
    
5.6    Ways and Means to Solve Over Population
    
5.7    Environment and Health
    
5.8    Family Welfare Programme
    
5.9    Human Rights
    
5.10    Child Welfare
    
5.11    Women Welfare

1. GEOLOGY

Geology : Earth Science

 Geo = Earth + Logos = Science

 Def : The science which investigates the history of the earth is known as geology.

 Following are the important branches of geology.

1.Coal Geology : it is related with natural gas, coal deposits and their formation.

2.Crystallography : includes the crystal and atomic structure of the mineral. 3. Drilling Technology : it is related with the cores, core logging and coorelation of the lithology.

4.Engineering Geology and Surveying : it is related with engineering aspects of the earth.

9. WEATHERING

The general process of production of rock waste partly by mechanical breaking and partly by chemical decomposition is known as weathering. The resulting products of weathering accumulate in the same place from which they are derived and there is no transport involved in the process.

Agents and types of weathering : The agencies which are involved in the process of weathering are atmosphere, water and organisms. The whole process of weathering may be conveniently divided into two types : mechanical or physical weathering and chemical weathering. Mechanical weathering involves those processes which bring about disintegration of rocks and minerals without any chemical activity. Chemical weathering involves various chemical processes which slowly decompose the rocks and minerals. In nature two processes are intimately associated and only under extreme conditions, they do occur as a separate entities. Mechanical weathering breaks down the rock creating more surface area and facilitates chemical weathering. Chemical weathering weakens the rock and makes it more susceptible to mechanical break down. Thus the two processes are always complementary to each other.

19. PHYSICAL PROPERTIES OF MINERALS

Def : The minerals are naturally occurring solid bodies having definite chemical composition and certain atomic arrangement, and are formed by inorganic processes in the nature.

All the minerals possess certain physical properties which are considered as follows.

1.Characters depending upon light such as colour streak, luster, transparency, translucency, phosphorescence and fluorescence.

2.Characters depending upon certain senses such as taste, odour and feel.

3.Characters depending upon the atomic structure and state of aggregation such as form, hardness, tenacity, fracture, cleavage and surface tension effects.

On the basis of these three characteristics, the minerals are identified and distinguished.

24. IGNEOUS ROCKS

Introduction : Petros = rocks and logos = science

Petrology means the science of rocks. It deals with the mode of occurrence composition, classification and origin of rocks and their relation to geological processes and history of the earth.

Rocks can be studies in two ways : The study of rocks as specimens in the laboratory is called Petrography which places emphasis on the purely descriptive part from textural mineralogical and chemical point of view. Petrogenesis deals with the origin and processes of formation of rocks. Petrology is a broader term which includes both petrography and petrogenesis.

Igneous rocks are formed by cooling and solidification of magma, either underneath the earth’s surface or above the earth’s surface.

27. STRIKE AND DIP

Outcrop : A part of the rock formation which crops out or exposed on the surface of the earth is called an outcrop.

The total area over which a particular rock unit occurs at the surface whether visibly exposed or not. The term outcrop is especially used for delination of such an area on a geological map.

Attitude : To study these outcrops their attitude help in better understanding the position of the bed on the ground surface or in field is attitude of a bed can be described with the help of two basic structural elements i.e. strike and dip.

34. GEOPHYSICAL METHODS

This chapter gives important and useful methods for measurement of seismic signals.

Firstly a brief introduction of seismic signals is given. The P waves, S waves and L-waves are discussed in short.

The old methods of measuring seismic signals like mechanical geophones are replaced by electronic geophones. The discussion includes Electromagnetic type, Reluctance type, Capacitive type and pressure type of basic geophones. New methods of damping are included. New Recently developed amplifiers and filters are also included. Development in oscillographic elements and cameras are discussed. Other information includes, the recently reported Array Technology and Space Technology for measurement of seismic signals.

Introduction

Environmental Assessment is taken up in this exercise as a rapid assessment technique for determining the current status of the environment and identifying impact of critical activities on environmental parameters. EIA is a relatively new planning and decision-making tool first enshrined in the United States in the National Environmental Policy Act of 1969. It is a formal study process used to predict the environmental consequences of any development project. EIA thus ensures that the potential problems are foreseen and addressed at an early stage in project planning and design. Creation of Environmental Impact Assessment (EIA) system is vital to conform socio-economic development projects to environmental safety and thereby ensure sustainable economic development. In view of the fact that development is an ever-growing process, its impact on the environment is also ever increasing, leading to rapid deterioration in environmental conditions. As such Environmental Assessment provides a rational approach to sustainable development.

It also enables us in carrying out Environmental Cost-Benefit Analysis of projects at an initial stage. It is thus a precursor to detailed analysis of environmental impacts, which are taken up only if a need for the same is established.

Metals are toxic and non biodegradable pollutants released into the environment through effluents from agriculture waste, mining, metal processing industries, pharmaceutical industries as well as domestic and natural activities. Metallic pollutants tend to persist indefinitely and eventually get accumulated in the ecosystem. Metals especially arsenic, copper, cadmium, chromium, lead, mercury, nickel, selenium and silver etc. possess a risk to living systems. Conventional processes applied to remediation of metallic pollutants are often restricted due to technical and economical constraints. Particularly when the metal contamination is at very low concentration the conventional methods become inefficient. In this situation application of bioremediation techniques is a technology of choice for environmental protection and clean up.

Introduction

Impact Assessment can be broadly defined as the prediction or estimation of the consequences of a current or proposed action (project, policy, technology). Emergence of EIA can be related to National Environmental Policy Act (NEPA) of 1969 in the USA. This act is now considered as model legislation for implementation all over the world. Today we have more than 100 countries that have adopted EIA legislation. EIA requirements of aid agencies and funding agencies are typically based on the principles included in the NEPA. In any project planning, along with the traditional technical (engineering) and economic considerations the NEPA requires environmental impact considerations. Environmental impact statements (EISs) are prepared as action forcing mechanism in NEPA that describe the environmental consequences of major actions which significantly affect the quality of human environment. Thus, the primary purpose of EIA is to encourage the environmental considerations in planning and decision making process. Finally, it is expected to arrive at actions which are more environmentally compatible.

Introduction

The town Paithan is famous by it’s name Dakshin Kashi. Godavari river has pristine glory and great significance for Hindus.

Nath temple is situated on the bank of Godavari river. It is a holy place and that’s why it becomes a place of public gathering on Ekadashi, Aashadi Ekadashi, Poornima, Deepawali, Dasera etc. Every year during Chaitra lakhs of people gather.

But at the time of Sheshti, which occurs once in a year is a special event. Hence many fold increase of congregation compared to other melas. The particular small stretch of river near temple was highly polluted, due to mass bathing and other polluting activities. The warm weather shall alter the photosynthesis rates, biodegradation and affect BOD, DO, pH etc. Recent Nath Sheshti at Paithan during 20^th March to 22^nd March 2006, drew about one lakh of pilgrims and had a few special aspects of interests from an environmental point of view.

Considering all the above aspects, it was decided to assess the changes in quality of river Godavari during Nath Sheshti.

Introduction

A society constitutes of several social system and institution such as family, school, religion etc. Every activity of these social systems and institution affect our environment in some way of other. There are various factor bring changes in the society. They are biology, environment, psychology, culture, demography and technology. All these factors collectively contribute to the changes in our society.

Auguste Gomte the father of sociology - defined sociology as the science of society. Sociologist believes that one can study society and understand the laws of society by applying the tools of natural sciences. We need to understand the nature as environment, its nature of work and our interaction with it, to understand and improve the efficiency of working with the nature. The Global deterioration the humanity is facing today is unprecedented in the annals of human history. We are already facing grave, water crisis disasters of all kinds, food, energy and ethical crisis etc. The solution is not visible and may not be visible in near future too. Environmental pollution means contamination in water, air, and land due to the various human activities. Man exploits natural resources to earn more and more profits. Forest is being cut down, the land is spoiled, and the air is becoming fuel and water being polluted. So nature has lost its balance such a situation has leaded us to what can be called as Environmental crisis. The changing lifestyle of our society is one of the main reasons for this crisis.

But unplanned execution of work and excessive industrialization and many other human activities has brought us to an alarming stage. In the face to live a luxurious life style we have been destroying the natural ecological balance.

Introduction

Present work report the study on Jakekur dam situated 4 km. from Omerga

The degradation of dam has occurred not only due to influents inflow but also by sanitation, domestic sewage, agricultural waste, and other activities around the dam like washing cloths, cattle, vehicles, and dumping of solid waste. Apart from it a large number of heavy metals is contributed by corrosion of metal pipe, runoff water from surrounding area during rainy season discharge of decorative paints in water bodies.

Geographical and morphological features of Jakekur dam.

Catchments area : 2110 hector

Gross storage : 10.17 TM C

Full reservoir level : 10 meter.

Length of the dam : 21.25 km.

Height of the dam : 14.80 meter.

Introduction

Environmental problems have come to the forefront as one of the most important issues in transport policy. For a number of pollutants the road transport sector is one of the most significant contributors to environmental pollution. Vehicular emissions have been identified as one of the major contributors in deteriorating air quality in the urban centers. The problem has further been compounded by the concentration of large number of vehicles and comparatively high motor vehicle/population ratios in these cities. Substantial SPM, RSPM CO₂ and No_x are emitted. The problem of air pollution has assumed serious proportion in some of the major metropolitan cities of India. Therefore, CPCB has 296 monitoring stations all over India covering major cities.

The air pollution situation in most of the cities is still far from satisfactory. In India the major air pollution reason is automotive smoke and smoke from industries. New channels are also publishing pollution levels in selected metropolitan cities. The most polluted city in Asia is Pune. The SPM and RSPM levels are displayed at various squares to create awareness among the masses.

Smaller cities like Nanded, Parbhani and Yavatmal are not covered under National Ambient Air Quality Monitoring (NAAQM) scheme of Central Pollution Control Board (CPCB). The National Ambient Air Quality Standards for suspended particulate matters (SPM) are based on gravimetric measurement. Standards for Respirable suspended particulate matters (RSPM) are also based on gravimetric measurement. The development in terms of number of vehicles and building construction has also reached at the doors of these cities and towns. Nanded city having population of 5.5 lakhs has total number of Auto rickshaws more than 5,000. In the present study, Nanded city has been selected to check particulate matters and gaseous pollutants. Since, the city is one of the important Pilgrimage and commercial centre.