eChapters

Minerals are the building blocks of the earth’s crust. Derived inorganically, either as chemical elements or more often as chemical compounds, minerals are essentially solid. Minerals often form crystals, while aggregate of minerals constitute a rock. Mineralogy is the discipline devoted to the study of minerals including their formation, occurrence, properties, composition and classification . Needless to say, the subject of mineralogy is the foundation of crystallography, petrology and other branches of geology.

Section A dealing with Minerals comprises nine chapters. Chapter I presents salient features of the earth including composition. and structure of the crust mantle and core. Chapter II presents their categories and the how minerals derive their names. Since minerals are essentially a combination of atoms and molecules the significance of chapter III which deals with crystal chemistry cannot be over emphasized.. Chapter IV and V deal with physical and optical properties of minerals which are crucial in identifying them in hand specimens and under the polarising microscope. Classification of minerals and their occurrence is dealt in a general way in chapter VI while descriptive mineralogy is presented in Chapters VII ( Silicate Mnerals) and VIII ( Non-Silicate Mnerals). Minerals are no doubt a subject of serious scientific curiosity but ultimately their use to man is by far the most important theme. Chapter IX therefore is devoted exclusively to different uses that are minerals are put to. The chapter ends with eye opening information as to the quantum of minerals that man uses, taking one of the most industrialized nation USA as an example.

Abstract

Prediction of the occurrences of Landslides requires a set of complex analyses, involving multitude of factors which are to be studied systematically in order to evaluate the landslide vulnerability. The increasing availability of computer-based tools and data storage capabilities are found to be useful in landslide vulnerability mapping. One such significant tool in landslide studies is Geographic Information System (GIS). In this article some approaches were made to model the land slide hazard for Sirumalai Hills, Dindigul District, Tamil Nadu, India using Geographical Information Systems and the same is presented in this paper.

Abstract

Anantapur is the driest district of Andhra Pradesh and hence, agriculture conditions are very often precarious. Groundnut grows where other crops fail and thus it is the predominant crop of Anantapur district. Groundnut is grown in about 7.5 lakh ha in Anantapur district; however the average yields are low at 500 kg ha^-1. Among various available vegetation indices, normalised difference vegetation index (NDVI) is widely used for all reasons, which is a single numerical indicator of presence and condition of green vegetation. NDVI mapping at a regional scale helps to assess the spatial changes in the vigour of green vegetation and thus occurrence of any moisture stress. Climate tools have a great role in understanding the crop performance and estimating the yields. This study was taken up by using freely available MODIS data to understand NDVI in terms of abiotic stresses over Anantapur district and linking with the actual rainfall conditions, groundnut crop acreage and production. Results indicate that low groundnut yields in general could be related to NDVI-based stress measurements and rainfall quantum and distribution in the area however, with a few exceptions. It is hoped that by combining improved practices through IWM with climate-adapted crop varieties, rainfed farmers of Anantapur district can sustain their crop production under present climate variability and become resilient to future climate change.

Keywords: Climate, MODIS, NDVI, Anantapur, Groundnut, Integrated Watershed Management

Abstract

There is a consensus amongst the geoscientists that overall there has been progradation along the east and west coasts of peninsular India. However, the present day configuration of the coasts and some of the geomorphologic features such as absence of spit and delta along west coast and absence of major estuaries and petroliferous structures along east coast still remain controversial. The present study, based on the appreciation of certain geomorphological and tectonic features on Landsat imagery and aerial photographs of southern part of Indian Peninsula, suggests that the evolution of the coastline has been mainly controlled by tectonism.

The tapering nature of the coastline is attributed to the Precambrian orographic axis. The serrated nature of the post Precambrian coast line is due to the Precambrian transverse faults, whereas the serrated margin of the post Gondwana, Post cretaceous and post Tertiary coast lines are attributed once again to the Precambrian faults reactivated time and again. During the Quaternary period the coast line has undergone many modifications. The coast line attained sinuosity due to Pleistocene folding which is well manifested by river migration. The coast line was subsequently faulted and shifted with en echelon pattern due to N-S regional compression which is referable to the collision of Indian Plate with Tibetan plate.

Abstract

The coastal regions are always tectonically active since these form the junction between the continental and oceanic plates. These tectonic activities and the resultantly tutored fluvial and marine geomorphic processes and the independent fluvial and marine geomorphic processes carve out the coastal morphology. And if these coastal geomorphic features are studied, it will lead to the understanding of the morphotechtonics. One such a study carried out for a part of Ganjam coast, revealed various geomorphic anomalies viz: presence of high order hill ranges only in the north eastern and south western parts of the area with the central plain, northerly migrating Ganjam river, development of wide beach ridges only along the central plain, all indicating the Late Quaternary upliftment of the central plain.

Introduction

The Indian subcontinent is vested with nearly 9,000km long coastline both in its eastern and the western continental margins. These coasts provide unique configuration with convexities (land protruding into the coast), concavities (vice-versa), deltas of different morphologies, beach ridges and swales, bay mouth bars, peaks, serrations and projections in the shorelines, all indicating the vibrant tectonic, fluvial, marine and aeolian processes. As the coastal zones in general, form the boundaries between the continental and oceanic plate margins, these are inherent weak zones prone to tectonic activities, which in conjunction with other geomorphic processes, provide unique architecture to the coasts with above varied geomorphic features. That too, the Indian coasts were inferred to stand as testimony to the vibrant tectonic activities and other related geodynamic processes of the Quaternary period (Ramasamy, 1989; Ramasamy, 1999).

Mosaic is the combination of two or more raster images into single image. Sometimes, single image captured by remote sensing satellite doesn’t completely covers the desired study area mostly. Therefore, users resort for mosaicking two or more images captured by satellite sensors from different paths so that the whole study area is merged into a single raster image to facilitate the image processing and analysis. The pixel size of the raster images should be same for mosaicking.

In most of the cases, there is spatial overlapping among the raster images from which we want to create mosaic. These overlapping areas are handled in multiple ways which is being discussed further using R – code example. For mosaicking raster images in R, mosaic function of the raster package is used.

Definition of Disaster

A disaster can be defined as a sudden or catastrophic event that causes significant damage, destruction, and disruption to human life, property, or the environment. Disasters can be natural, such as earthquakes, hurricanes, floods, wildfires, or they can be human-made, including industrial accidents, terrorist attacks, or technological failures.

Disasters often result in the loss of lives, injuries, displacement of people, infrastructure damage, and the interruption of essential services like electricity, water, and communication systems. They can have long-lasting impacts on communities, economies, and the environment.

Governments, organizations, and communities implement disaster preparedness, response, and recovery strategies to mitigate the effects of disasters, protect lives and property, and facilitate the rebuilding and restoration of affected areas.

Introduction

The natural hazards like floods, cyclones, droughts, landslides and earthquakes are not rare or unusual phenomenon. India is among the world’s most disaster prone areas and a large part of the country is exposed to such natural hazards, which often turn into disasters causing significant disruption of socio-economic life of communities leading to loss of life and property. It would not be considered as a disaster unless it resulted in actual damage to human life or property. According to data accumulated over past 25 years, natural disasters in Asia accounts for about 40% of the world’s total disasters while the death toll ratio is about 50% and the number of people affected is about 90%. The latter figure is about 2.2 times the ratio of number of occurrences in Asia. The figures vary widely over the decades, a result that can be attributed to a few particularly terrible disasters. Such as the 1976 Tangshan Earthquake in China, which killed about 250,000, and a series of severe cyclones that hit Bangladesh in 1970 with a death toll of about 500,000. The death toll resulting from wind and flood disasters jumped by an order of magnitude in the 1990s. But this sudden increase affected Asia’s ratio to the world total by about 15 percentage points because there was a worldwide surge in this type of disaster. Clearly, there is an extreme concentration of victims of such disasters in Asia, Another substantial increase is clear in the value of damage caused by typhoons and cyclones; it is now running at 10 times the level of the 1980s. Again, however, the ratio has remained almost unchanged, at about 40%, because hurricanes in Central and North America account for more than 50% of the world total (51.2%, 58.5%, and 54.4% in the 1970s, 1980s, and 1990s,respectively). It is sadly worth noting that there has been conspicuous growth in the absolute value of damage in both Asia and the Americas.

Introduction
A natural disaster refers to a significant and harmful occurrence caused by the Earth’s natural processes. Examples of natural disasters include floods, storms, tornadoes, volcanic eruptions, earthquakes, tsunamis, and other geologic phenomena. A natural calamity can result in fatalities or destruction of property, and usually leads to economic harm, the extent of which is determined by the afflicted population’sability to bounce back and the availability of infrastructure.
Categories of Natural Disasters/ Catastrophes
Floods
A flood is the result of water overflowing and covering land. According to the EU Floods Directive, a flood is defined as the temporary  inundation of territory that istypically not submerged in water. Flooding can occur when the amount of water in ariver or lake exceeds its  capacity, causing the water to overflow and breach its normal borders. The size of a lake or other body of water may alter due to seasonal variations in precipitation and snow melt. However, it is not considered a substantial flood unlessthe water submerges land that is utilized by humans, such as villages, cities, populated areas, highways, and farms.

Forests are valuable renewable resources for humanity on Earth. The country’s forest cover has been estimated to comprise 19.39% of its entire geographical area. Forests consist primarily of trees that offer wood that can be transformed into solid, liquid, and gaseous fuels. Forests play a crucial role in regulating the Earth’s temperature by serving as carbon dioxide filters. They provide habitats and shelters for numerous species and also contribute to the visual beauty of the environment. Forests supply the necessary resources for a range of wood related industries, including pulp and paper, composite wood, rayon and other synthetic fibers, sporting goods, furniture, boat
construction, and matches. Timber plays a crucial role in the construction of buildings.Various products, such as bamboos, resins, gums, oils, fibers, medicines, katha, lac, shellac, etc., are derived from forests.
The country’s forest cover has been calculated to be 637,293 square kilometers, accounting for 19.39% of the country’s total geographic area. This falls short of the stipulated requirement, which is 30% of the entire land area. The geographic region is comprised of 11.48% dense forest, 7.76% open forest, and 0.15% mangrove. World Forest Day is observed on March 21st, while National Forest Day is celebrated on September 11th.

Natural resources are the resources present naturally in the environment. These resources are used by human being for their survival. Minerals, building stones, forests, and various energy resources are known as natural resources. Natural resources have been extracted and utilized since ancient times but as the population increased, the demand of natural resources are increasing day by day.

5.1 The Need

In spite of the considerable experience and quite a few facilities available in the country, the growth of application of isotope techniques is not commensurate with India’s size, its climatic and hydrogeological diversity and the sheer range of its water resources problems.

The situation may not be unique to India and other developing countries. Australia also appears to be facing a similar problem. A recent publication [1] says ‘the limited uptake of the method may be due to a number of factors. Until relatively recently, isotope hydrology has remained a largely academic pursuit, or measurements were the domain of national atomic energy agencies. A large fraction of information lies buried in the grey literature or in arcane technical journals. Interaction with local or regional water resources agencies has been the exception rather than the rule’

India has probably a stronger case for a more effective use of isotope techniques. A large portion of groundwater occurs in hard rocks in India. Normal hydrogeological and geophysical methods cannot fully describe such groundwater regimes to effectively plan their exploitation. It is essential to apply tracer hydrology methods, especially isotope geochemical techniques, for a comprehensive understanding of the systems. The examples of Manikaran geothermal springs, seepage studies in Salal tunnel and in some dams, given in the earlier chapters come under this category. Studies on percolation tanks in basaltic terrain and on recharge processes need isotope support.

It will not be long before we would be planning to exploit very deep ground waters (>500 m), both in the hard rock terrains of peninsular India as well as in the Ganga plains to meet our ever growing need for water. We would need good understanding of the recharge processes to these deep ground waters. Isotopes will have a large role in such investigations.

Arid zone hydrology is yet another area where the potential of isotope techniques has been effectively demonstrated for the characterization of the recharge processes, both palaeo and modern, and including the role of ancient rivers.

Abstract

Satellite imagery interpretation has shown the existence of a major Palaeochannel system in the Great Indian desert. These palaeochannels belong to the mythological Sarasvati river, which seems to have flowed southwesterly close to the Aravalli hill ranges and joined the sea in the Great Rann of Kutch. Subsequently it seems to have shifted northwesterly, and more precisely in an anti-clockwise direction and got buried in the desert in Anupgarh plains. While its oldest course is the now misfit Luni river, its final trace is now represented by Ghaggar river. Whereas its overall northwesterly migration is attributed to NE-SW trending cymatogenic arching along the Great Rann of Kutch in the southwest to the Siwalik hills in the northeast, its multivariate palaeodrainage is attributed to block faulting and land subsidence in the Bikaner sector.

A sound is a form or energy. Therefore, it has to have an impact on life in one way or the other. Most of the organisms of Kingdom Animalia communicate with each other creating a peculiar sound. Creating sound is inevitable for performing various life activities. Every animal species has the characteristic sound it reflects through its behavior. Whatever all the animals communicate through creating specific sounds is all-natural. Nature, as such is a stupendous repository of a diversity of sounds, all being specific characteristics of life.

Human behavior, however, is highly evolved in terms of creating a variety of sounds. Communication, entertainment, and many behavioral activities are expressed through creating distinctive sounds. There is a difference between natural sounds and the ones human beings create or can create. Humans often generate sounds, not just in a natural manner, but also with various technical aids, that often become unpleasant what we call noise. Creating noise, or noise pollution, seems to be an exclusive characteristic of the human species. Of course, there could be some natural sounds that might occasionally cause havoc to life. Examples are the sounds generated at the time of the volcanic eruption, during an earthquake

Introduction
The term “noise” originates from the Latin word “nausia.” There are negative repercussions of noise pollution on our bodies and minds. In general, the amount of noise and the length of exposure determine how much noise pollution there is. These
days, noise is a constant in our lives due to the advancements in industry, technology, and machinery.
Definition
Unwanted sound released into the atmosphere that poses a health risk is referred to as noise pollution.
The term “unwanted or unpleasant sound that causes discomfort” refers to nose pollution.
Another definition of noise pollution is “wrong sound, in wrong place at wrong time.”
Distinction Between Noise Pollution and Sound Pollution:
Sound is defined as the lowest level of 50 dB that is pleasant to listen to. Noise pollution is defined as any sound that is louder than 95 dB and bothersome to listen to.
Sources of Noise Pollution
1. Factories and industries, community and religious activities, and modes of transportation (air, train, and road) are the primary sources of noise pollution.
2. In metropolitan regions, automobiles, factories, industries, railroads, and airplanes are the main man-made sources.

ABSTRACT

The occurrence of fluoride more than permissible limit has been observed in ground water near Danishpet, Rajammannar Colony, Vayapurikombai, Melkombai, Umbilikampatty, Andikottai HC in Kadyampatty area, Salem district. Fluoride reaches to a maximum of 2.8 mg/l. Fluoride concentrations in ground water in various areas are as follows: Danishpet(2.0mg/l), Rajammannar Colony (2.8mg/l), Vayapurikombai (2.4 mg/l), Melkombai (2.4mg/l), Umbilikampatty (2.2 mg/l), and Andikottai HC (2 mg/l).. Granite gneiss and associated secondary vein filling minerals may be the source of high fluoride in ground water. The high concentration of Fluoride in ground water has led to human health hazard in the form of dental and skeletal deformation in the parts of Danishpet, Rajammar Colony, Vayapurikombai, Melkombai, Umbilikampatti and Andikottai HC villages.

Abstract

The landslides have become the fast spreading disaster all over the Indian sub-continent. As such landslides were mostly occurring in the Mighty Himalayan Mountains, it was all along attributed to active tectonics. But when it started occurring in most of the mountain belts of India, various geological parameters, the anthropogenic phenomenon and rain fall were inferred to be the main causes for the landslides. Hence when this concept emerged, and again the Remote Sensing and the GIS technologies have phenomenally evolved, different types of variables, again on different resolutions and different methodologies have been adopted to prepare landslide vulnerability maps and this has started yielding varying types of outputs. As the landslide vulnerability zonation mapping (LVZ) is the first step in landslide studies it is essential to evolve a suitable methodology for the same. So the present study was carried out in a test site of around 300 sq.km in between Coonoor and Otacamund, Nilgiri mountains, Western Ghats, South India. In the said study, a set of 12 Earth System Parameters/Variables which could contribute to landslide vulnerability were prepared as GIS raster databases from the data interpreted from satellite MSS data and field geological and geophysical data sets. Similar GIS database was generated on 144 landslides. These landslides were superposed over such 12 Earth system parameters data and landslide vulnerability weightages were assigned to each subvariables of these Earth system parameters. In assigning weightages using such landslide incidence data various methods viz; slope, integrated terrain, information value, weight of evidence, index overlay and BIS methods were used and landslide vulnerability zonation maps were prepared adding all the 12 weightages assigned Earth system variables. In this, all the 12 earth system parameters were having same resolutions. Then the outputs were compared which revealed that the information value method is the best suited method for LVZ mapping followed by weight of evidence method.

As milk to a cow or fruit to a tree, ore is to Earth Sciences. Different academic and scientific aspects of geology are of no consequence to a common man. Ores and ore minerals from which valuable constituents could be extracted profitably is what the world is after- be it the continental masses, oceanic depths, desolate icy Antarctic tracts or now, even other planets of the solar system. The subject of economic geology is thus a subject of greatest interest among other natural sciences.

This last section will dwell on the theme of metallic and non metallic ore deposits. The first chapter begins with fundamental definitions, signifying the importance of minerals in human affairs. It also looks at ore minerals against the background of average crustal composition and presents a glossary of important terms in economic geology. The second chapter is a lengthy chapter devoted to the ways ore deposits are formed ( ore genesis). Broadly, the processes are described under two categories, the internal processes and the surface processes. Fuel minerals are taken separately towards the end of this chapter. Chapter III briefly introduces the relationship between location of minerals deposits to the revolutionary theme of global tectonics which attempts to answer why a mineral deposits occurs where it occurs.

The fourth chapter is devoted entirely to the Indian Mineral Deposits. It begins with a few important themes of mineral economics and dwells on the description of important Indian Mineral Deposits as to their geology, geography and economic potential. Lastly, the fifth chapter exclusively deals with the facts and figures of the Indian Mineral Industry presenting recent available data of resources, production, import, export and future prospects. It also gives a brief introduction to the important geo-scientific organizations of the country.

The remains of animals and plants of past ages preserved in the rocks are known as fossils, the study of which forms the subject of Palaeontology. The conditions for an animal or plant to become a fossil are firstly it must possess skeleton of some kind or some hard parts, since the soft parts are decomposed rapidly, secondly the organism must be covered up by sedimentary layer, otherwise it will soon crumble to pieces.

5.1 Modes of Preservation of Fossils

The conditions in which fossils occur depends, on their original composition and on the material in which they are embedded. The chief types are as follow:

5.1.1 The entire organism preserved

Occasionally the soft parts of the organism are preserved as well as the skeleton, the whole having suffered very little change. Instances of this are the woolly rhinoceros and mammoth found frozen in the mud and ice in Northern Siberia. Insects encased in fossil resin, known as amber, are found in the Oligocene beds in the Baltic shores of Persia, but the soft part of organisms are rarely preserved.

5.1.2 The skeleton preserved almost unchanged

Sometimes where the skeleton alone is preserved, it remains almost in its original condition, except that it has lost its organic matter. Thus the shells in the Pliocene beds of England differ from living ones only in being lighter, more porous and generally colourless. In some instances a certain amount of mineral matter, such as carbonate of lime, has been added to the skeleton, making it heavier and more compact.

Abstract

The paper deals with the roles played by the NGO’s in the relief and rescue phase of Dec, 2004 tsunami and the effective role played by NCRC -NGO Coordination and Research Centre - in the rehabilitation phase along Tamil Nadu coast by creating successful partnership with government and the public.

Keywords: The Role of NGO’s, Tsunami 2004, Relief and Rehabilitation, NGO Coordination Research Centre.

INTRODUCTION

The scale of the tsunami disaster was unprecedented and the response too was out of the ordinary. Tamil Nadu was the worst affected state in India with Nagapattinam district being the most affected with over 6000 lives lost, about 40,000 houses damaged or destroyed and 1.96 lakh people affected. Relief poured in from both government and non-governmental organizations, including the religious organizations, and the first few days witnessed heartwarming outpourings of help and support.

There were about 400 NGOs and an equal number of volunteers to help in the relief operations which included food, clothing, household utensils and bedding. With such a large scale of external support, mainly from organizations and people from outside Nagapattinam, it was not surprising that chaos and confusion marked the first few days of relief operations still. Based on the experience of some professionals experienced in disaster management, a coordination platform was created called the NGO Coordination Cell. This platform was managed by two NGOs, who had long standing field presence in Nagapattinam, viz., South Indian Federation of Fishermen Societies and SNEHA, with the mandate and support of the District Administration. The main role of this platform was to meet the field based requirements of all the relief camps with the resources and materials available with the NGOs and the Govt. The paper briefly deals with challenges faced by the NGO’s in relief and Rehabilitation of the historical Dec 2004, Tsunami.