eChapters

Climate change is one of the most pressing issues of our time, with far-reaching consequences for the environment, human health, and the economy. One of the most significant impacts of climate change is on the world’s water resources. Rising temperatures, changing precipitation patterns, and increased frequency of extreme weather events are all taking a toll on the availability, quality, and management of water resources. Water is essential for human survival, and its availability and quality are crucial for human health, food security, and economic development. However, climate change is altering the hydrological cycle, leading to changes in precipitation patterns, increased evaporation, and altered water flows. These changes have significant implications on demand for water resources, including reduced water availability, decreased water quality, and increased risk of waterrelated disasters which will ultimately impact agricultural production and food security.
15.1. Changes in Precipitation Patterns
One of the most significant impacts of climate change on water resources is the alteration of precipitation patterns and projected per cent changes in average annual precipitation over 1850-1900 period at 2.00C increase in temperature are depicted here (Fig.15.1).

Hydrometeorology forecasting is limited to forecasting of occurrence of rainfall to a greater extent. Although several countries all over the world have developed and established hydrometorological forecasting with focus on occurrence of floods and droughts, still there is very limited success. Floods are associated with occurrence of continuous heavy rainfall due to movement of low-pressure systems like cyclones and depression overflow into rivers, reservoirs and breaching of bunds. In countries like India, the floods occur on the average in 70 lakh hectors of area and the economic loss due to floods and expenditure on relief operations mounting year after year besides loss of life. Foods occur at all of a sudden leaving little time for planning mitigation or rescue operation. Flood forecasting in based on impact assessment of heavy rainfall assessments to identify the exact area that is likely to be affected. It requires more intensive research. Forecasting of droughts is still an area of serious concern. There is need to strengthen regional capabilities to develop forecasting techniques for occurrence of flood and droughts through proper analysis of historical data in conjunction with meteorological forecasts and remote sensing data. Though flood alerts are issued, the identification of exact area and the extent to which flood impacts are not very clear most of the times heavy rainfall warnings are not just sufficient until and unless the vulnerable areas can be clearly specified. The medium range forecasting will be extremely useful for issuing flood alerts.
14.1. Forecasting Droughts
Long range forecasting of seasonal rainfall can indicate the possibility of receiving excess or deficit rainfall over larger regions. In India, there is considerable progress in development of long range forecast of Southwest monsoon rainfall. This forecast also indicating the regions which may get surplus or deficit rainfall and for indifferent parts of a given region as well. However, there is serious dearth of local expertise to further analyse and interpret the long-range forecast for a given area on the basis of local climate data. The advantages of reliable long-range forecast are still unexpected. Almost one fifth of the area in India gets affected by draught most of the years. The drought affects are more severe in arid and semi arid regions. Prediction of occurrence of drought and its intensity, period of occurrence and the areas to be affected by drought is very important. During recent years, there is considerable increase in the occurrence of droughts due to climate change which is attributed mainly to atmospheric pollution. The physics of the pollution is consistent and not the policies support in handling hydrometerological disasters. There are instances where in flood and droughts occurred in the same

A watershed is an area that provides pathway to the surface or sub surface water flow to a given drainage system. The watershed is a hydrological unit. The area of watershed may vary from few hectares to thousands of square kilometres. The watershed development involves effective management of land and vegetation in order to conserve and improve the quantity of water. The watershed development is a comprehensive and sustainable solution to water conservation (Fig.13.1).
The watershed development has several advantages. It helps in
• Conservation, upgradation and utilization of natural resources particularly land, water and vegetation
• Minimise the inequalities between rainfed and irrigated areas
• Promoting cost effective adoptable simple technologies
• Supply water for domestic ,agricultural and industrial use
• Poverty alleviation and employment generation
• Reducing chemical pollution
• Adopting flood control measures by constructing water storage or impounding structures

A disaster is sudden event that causes significant damage to the people, environment and the economy. Disasters are serious disruptions to the functioning of a community that exceed its capacity to cope up using its own resources. The disasters that result either due to excess water or severe water deficit are floods and droughts.
12.1. Floods
The flood is an overflowing of water onto land that is normally dry. Floods may occur due to
• Heavy rainfall
• Ocean waves
• Snow melting
The economic losses due to floods will be very high and nearly 68 per cent of the economic losses are attributed to floods only. During the year 2018, India suffered a loss of nearly 90,000 crores due to floods alone. There are several causes for occurrence of floods in India. The major causes are
• Severe cyclonic storms in coastal areas which produce continuous heavy rainfall for 3 to 4 days in succession
• Encroachment of flood plains with residential structures
• Inadequate strength of river banks when there is high flows of water in the rivers
• Unplanned growth of urban areas
• Silting of water storage structures due to increased soil erosion thereby decreasing the storage capacity of reservoirs
• Simultaneous flooding of rivers and tributaries due to excessive water flows

Agriculture sector alone uses nearly seventy per cent of fresh water in the world. Therefore, water use economy in the agriculture sector is becoming a necessity. Increasing flood production is possible reducing water used for irrigation if we can adopt precision irrigation (Fig.11.1).
The precision irrigation has to be practiced by providing water to the crop plants in its root zone to meet the water requirements. The precise irrigation can result in-
• Water saving
• Avoid weed control
• Preventing loss of water due to infiltration
• Preventing loss of water due to surface evaporation from the soil
• Minimise salinity problems
• Improving water use efficiency of crops
Traditionally farmers were practicing flood irrigation. It is a method of watering crops delivering to a field and allowing it to flow over the ground among the crops. It is a simple and inexpensive technique followed in less developed areas. Flood irrigation is not very efficient way as nearly 50 per cent of the water applied in the field will be lost through run-off, soil evaporation and other factors. Flood irrigation is only suitable in wet climates and not effective in sandy soils. It leads to water logging in clay soils. There are several types of flood irrigation such as basin, border, furrow and contour irrigation. Although flood irrigation is not very efficient, the water wastage can be avoided to some extent using some techniques

The purpose of irrigation scheduling is to decide upon the amount of water to be applied for irrigation and timing of irrigation in order to avoid wastage of precious water. The irrigation scheduling is also used to determine the number of irrigations required for a crop during its growth cycle and judicious use of water depending upon the weather forecasts issued from time to time. The irrigation scheduling has to be planned for either full irrigation or supplementary irrigation depending upon the availability of water resources and the season during which crops are grown. Crops grown during the dry season requires full irrigation and crops grown during the rainy season require supplementary irrigation. The third category of irrigation is protective irrigation which is practiced in dryland areas. The protective irrigation is given when the crops are experiencing severe moisture stress due to prolonged dry spells wherever the farmers has access to small ponds and tanks developed within his own field as water harvesting structures.
10.1. Full Irrigation
Under full irrigation, the crops are provided with irrigation right from land preparation till the crop is getting ready for harvest maturity. The full irrigation will be usually planned for maximum yields of the crop (Fig.10.1).

Remote sensing involves measurement of the physical properties of a body without actual contact with it. It is based on the reflectance when the electromagnetic radiation is incident upon a body or surface. The spectral characteristics of the reflected radiation vary depending upon the nature and condition of the surface. In case of vegetation, it absorbs light and can reflect light in the visible range. The leaf pigments dominate the reflectance properties (Fig.9.1). The radiation bands within which the reflectance of electromagnetic radiation takes place are classified as follows-
Spectrum Wave Length (nm)
Visible 400-700
Near Infrared 701-1300
Middle infrared 1301-2500
Far infrared >3000

9.1. Vegetation Indices
The vegetation index is a mathematical expression that uses spectral imaging data to characterize the health and growth of the vegetation indices are calculated using data collected by remote sensors like Satellites. The vegetation indices have wide range of applications in agriculture and hydrology including
• Classification of vegetation
• Apex health of vegetation
• Changes in land cover
• Drought monitoring
• Estimation of soil moisture
• Evaluate crop growth, vigour, biomass and chlorophyll content
• Irrigation scheduling

Stress is force per unit area. When matter is subjected to stress; it may undergo changes in size, shape and displacement. Plants are grown in open environment and are likely to experience stress due to environmental conditions or when subjected to pests and diseases. The stress experienced by plants due to environmental conditions is called abiotic stresses. These include stresses caused by weather factors and climatic conditions and include moisture stress and thermal stress. The plants may also experience stress due to strong winds, dryness and as well as humid conditions (Fig.8.1).
The plants are generally classified into three types depending upon the ability to cope up with moisture stress as exhibited by-
• Drought resistance
• Drought tolerance
• Drought adaptations
The moisture stress may be to shortage of Water Compared to its requirements for evapotranspiration and metabolic activities. The plants may also suffer moisture

It is estimated that the world requires nearly 70 per cent increase in agriculture production to meet the demand for food by the year 2050 based on current trends in population growth it can be achieved either by increasing land under cultivation (which is not possible), increasing the availability of more water for agriculture and efficient utilisation of available land and water resources. The best available option is to increase in productivity of unit of land for unit water. However, the availability of water for agriculture production cannot be presumed to be same year after year as the major source of water is precipitation more known for its uncertainty due to change in weather patterns from season to season and year to year all over the world. The element of uncertainty is increasing since the beginning of the present century due to climate change under the present circumstance, the crop production is practiced -
• In Irrigated Areas
• In Rainfed Areas
• Under Conserved Moisture Condition Without Any Source Of Irrigation
For increasing crop production under irrigated condition, it is necessary to identify crops and varieties that can produce more yield per unit of water even when there is some decrease in availability of water through irrigation. Therefore, the concept of water production function is used for evaluation of water use efficiency of the crops.

The movement of water from soil to the crop canopy and leaves to provide water for transpiration and the effect of weather factors on transpiration is most important area of study. When the crop is just sown, there will be an only evaporation of water from the soil. After germination of seeds there will be emergence of seedlings. After the emergence of seedlings there will be formation of leaves. The small leaves start intercepting the incoming solar radiation and absorb some portion of solar energy, get heated and there will be evaporation turn off water from the stomata of the leaf. When water vapour escapes into the atmosphere through the stomata of leaf, the plant absorbs carbon dioxide which results in photosynthetic activity. During night time, there will not be any photosynthesis due to absence of sunlight. The plants use parts of the photosynthetic accumulate for its metabolic activity and the process is called maintenance respiration. The balance of the photosynthetic accumulate contributes to the expansion of leaves and increased dry matter accumulation in crop plans. The process of dry matter accumulation in plants is called crop growth. When the seedlings start growing, there will be formation of tillers or branches. When the leaves grow it reaches a stage when the crop will be completely shading the ground and the soil evaporation will be minimum and maximum amount of water is lost only through evapotranspiration (Fig.6.1).

The plants draw water from the soil for growth and development. The soil acts a reservoir for soil moisture (Fig.5.1). The basic aim of a soil water balance model is to quantify the manner in which the water supplied to the soil either through precipitation and irrigation is disposed off. In the process, the soil water balance models were found to be extremely useful to determine the amount of water utilized by the crop for evapotranspiration.
The concept of water balance was originally developed by Thornthwaite, an American geographer and it formed the basis for development of more scientifi c advances due to its wide range of applicability including
• Choice of crops/ cropping systems based on water availability
• Irrigation scheduling
• Optimisation of limited water resources for higher productivity
• Characterization of droughts and agricultural droughts
• Assessment of crop yield and pre harvest forecasting of crop yields
• Designing irrigation projects
• Development of water storage structures
There are quite a large number of water balance models available in literature nowadays. Several of these models may be applicable for regions where there are developed. There were considerable efforts to develop water balance models can be used by the crop on daily basis in case of different crops as well. The choice of a water balance model to a large extent depends on the availability of data required for running the model. It may not be possible to cover all models available in

The soil consists of many solid particles of different sizes and is capable of absorbing and retaining water in the soil within certain limits when water is received through either from precipitation or by irrigation. The water that is held in the soil is called soil water (Fig.4.1). It can exist also in the form of water vapour as well. The crop production depends upon the soil water. All the water that is present in the soil may not be available for plants.
The water availability to the plants from the soil depends upon some physical properties of the soil as well as on the physical processes that govern the existence of water in the soil. Therefore, it is necessary to understand about the relationships that govern the water availability in the soil as explained in the following text-
4.1. Energy Concept of Soil Water
Soil water energy concept is all about potential energy, gravitational potential, osmatic potential, pressure potential energies.
4.1.1. Soil Water Energy: The total energy state of soil water is defined by its
equivalent potential energy as determined by various forces acting on the water per unit quantity. Different energies are involved including kinetic and potential energy.

The major source of water supply on the earth is precipitation. The water received at the earth’s surface from the atmosphere either in solid or liquid form is called precipitation. The water received in solid form may be snow or hail. The precipitation is seasonal in character in many parts of the world. The precipitation may occur due to –
• Conventional physical process
• Orographic effect and
• Convergence of air masses
3.1. Conventional Physical Process
It occurs when the air on the surface of the earth and few metres above the surface of the earth is heated by absorbing long wave radiation emitted by the earth’s surface. As the air is heated, it becomes lighter. The water vapour formed due to evaporation from the soil surface or water bodies will mix with the air and the air will be moist. When the moist air gets heated it becomes lighter and rises vertically upwards. After reaching certain height, the air gets cooled enough to get saturated with water vapour. The moisture in the saturated air will condense on small solid particles to form tiny drops. These solid particles may be dust or smoke or solid particles suspended in the atmosphere and are called aerosols.

Water is the most important natural resource that governs and exercises control on living organisms on earth besides supporting all human activities. The demand for water is almost increasing at exponential rate due to increase in population and industrialization. All sectors of agriculture including crop production, horticulture, animal husbandry, poultry and fi sheries primarily depend upon water. Water scarcity can cause all kinds of miseries. The water exists in all 3 different forms on earth. It exists as snow or ice in glaciers and ice caps, liquid water in rivers, lakes, streams, tanks, ponds and as groundwater storage. The water exists in all three different forms in the atmosphere. The clouds may contain fi ne ice particles, tiny water droplets and as well as water vapour. The air in atmosphere also contains water vapour. It is estimated that 97% of water is salt water and remaining 3% of water is pure and fresh water. Approximately two-thirds of the fresh water is trapped in glaciers and ice caps. Most of the fresh water (30%) exists as groundwater. About 0.7% of fresh water exists as soil water and 0.3% a fresh water accounts for surface water resources and water present in the atmosphere as water vapour, water drops and ice particles. The circulation of water between oceans, earth and atmosphere forms hydrologic cycle.
2.1. Hydrological Cycle
The hydrological cycle explains the continuous recirculation and transport of water between the atmosphere, oceans and earth. It is a very complex system that has many sub cycles associated with it. For example, the water from earth surface, oceans and water bodies get evaporated due to heat energy received from the sun in the form of incident solar radiation (Fig.2.1).

The entire world is now facing a crisis situation. The problems encountered to address the crisis are interactive with each other and there is no easy way to find solution. The world’s population is expected to increase by 70 per cent by the end of year 2050 and there is need to step up agricultural production for a hunger free world. Nearly 70 per cent of the fresh water is used in agriculture sector. The demand for water in agriculture sector can be judged by the fact that several thousands of litres of water is required to produce one kilogram of food grains. Whatever maybe the source from which water is drawn for agriculture, all the sources depend upon the precipitation for replenishment on continuous basis. The precipitation patterns are not consistent and are known for greater variability from season to season, year to year and from region to region. These inconsistencies are further increasing due to recent threat of climate change triggered by the atmospheric pollution. The atmospheric pollution due to increase of greenhouse gases in the atmosphere is responsible for rise in temperatures. The rise in temperature induced changes in global pressure and wind systems. The consequence effect of it is changes in rainfall patterns, frequent occurrence of extreme weather events like floods, droughts, heat waves, intensified cyclonic activity. Rise in temperatures is increasing evaporation of water and water requirement of crops as well. There is considerable increase of the chemicals in the agriculture sector in the form of fertilizers, pesticides, fungicides and weedicides how to increase crop production and protection of crops from biotic and abiotic stresses. Consequently, there is increased pollution of water resources which may adversely affect the availability of fresh water, which is essential and critical input in agriculture for increasing agricultural production. It calls for efficient utilization of water resources in agriculture. More concerted efforts are required immediately to:
• Improve water use efficiency in agriculture
• Reduce pollution of water resources
• Conservation of fresh water resources
• Reduce emissions in agriculture sector and
• Prevent dwindling of fresh water resources

Introduction
Historian “Donald Worster” tells us that fertilizers are not a replacement for rich soil. The soil is a resource for which there is no substitute. Time and climate have an impact on how soils develop as well. In humid and warm climates, soils develop more
quickly than in excessively dry or cold regions. In 15 years, under perfect temperature circumstances, soft parent material may develop into 1 centimeter of soil. It could take hundreds of years for a hard parent material to turn into soil in unfavorable climate conditions.
Definition
The land’s thin layer of soil is made up of a combination of minerals, organic matter, living things, air, and water that work together to support the growth of plants. The source material’s transformation into soil was influenced by a number of elements.
The accumulation of persistent poisonous compounds, chemicals, salts, radioactive elements, or disease-causing agents in soil that negatively impacts plant growth and animal health is known as soil pollution.

Introduction
The sun is the primary source of energy for all life on Earth. The primary energy source for the majority of ecosystems is limited to this one. Photosynthesis is performed by green plants, certain types of algae, and microorganisms. They utilize solar energy to fuel chemical reactions that combine basic inorganic components to create intricate organic chemicals. Elements undergo a cyclical process as they move through the different compartments of an ecosystem.
Photosynthesis is the process by which solar energy is captured and transformed into food in the form of chemical energy. Food comprises fundamental elements such as carbon, hydrogen, nitrogen, and other necessary elements, along with stored energy. The components present in the food undergo recycling. The flow of energy and nutrients begins with the producers, then moves to the consumers, and ultimately returns to the producers through the activity of decomposers. Energy, in contrast to materials, is not subject to recycling. Food traverses the food web, resulting in energy dissipation. Typically, just a mere 10% of the energy accumulated in a certain trophic
level, such as the producers, is effectively passed on to the subsequent trophic level, such as the herbivores. This is referred to as the energy pyramid. Ultimately, the energy available in the trophic level becomes so depleted that it cannot sustain any higher trophic levels. Consequently, the presence of fourth order consumers in any ecosystem is extremely rare.
The biotic component, often known as the life component of the environment, encompasses a diverse array of plants, animals, and bacteria, which form interconnected communities.

Introduction
The rapid advancement of information technology in recent years has led to an explosion in the awareness of environmental concerns and issues pertaining to human health. UNEP created UNEP net, the green global Internet, as well as the satellite communication system.
Information technology is necessary for environmental management.
The general population, especially in developing nations, and decision- and policymakers still have limited or no access to this information in a readily comprehensible format. Politicians and the general public have not yet been able to personally experience the effects of ozone layer depletion, climate change, or biodiversity loss. These are all new challenges, and scientists strongly advise taking more immediate action than legislators are able to. Thus, it is more crucial than ever to close the knowledge gap between scientists and decision-makers in order to formulate environmental policy.
UNEP created the Global Resource Information Database in 1985 in an effort to close this information gap and give the world’s population access to current, trustworthy environmental data. Telecommunications and geographic information technology were used as strategic tools to do this, with the former being used for information exchange and analysis and the latter for information distribution.

Introduction
Health patterns were impacted by environmental changes. Aspects of human health, including quality of life, that are influenced by environmental physical, chemical, biological, social, and psycho-social elements are collectively referred to
as environmental health (WHO). It describes the theory and practice of identifying, addressing, preventing, and managing environmental conditions that have a negative impact on the health of current and future generations.
The illness rickets is caused by the overcast atmosphere, which blocks off sunlight and prevents people from obtaining vitamin D from the sun. In Europe, the air quality that suppresses smoke and turns mist into smog is the cause of both lung cancer and chronic bronchitis. However, fair skin types with low pigmentation are more susceptible to skin cancer in bright sunlight. Cold and moisture have been linked to rheumatism. Ruminant animals get infections as a result of the absence of trace elements in the soil. Humidity and temperature have an impact on disease vectors. Malaria, yellow fever, dengue, encephalitis, filariasis, and other diseases are spread by mosquitoes.
Types of Diseases
The following is a classification of the primary illnesses that people suffer from:
• Deficiency diseases: These are conditions brought on by a person’s diet lacking in certain vital nutrients, such as vitamins, minerals, or amino acids. For example: Vitamin A deficiency, anemia, rickets, osteomalacia, and gum and tooth disorders.

Population Growth
Around 1810, it took all of human history for the population to reach one billion. This quadrupled to 2 billion people in just 120 years (1930). Then, in 45 years, 4 billion (1975). From 4.4 billion in 1980 to 5.8 billion in 1997 and 7 billion now, the world’s population has increased. It is predicted that in less than 40 years, that number will double again to 11 billion. This indicates that more people than ever before are joining the group every day.
The United Nations Population Fund (UNPF) predicts that by 2025, there will be 10 billion people on Earth, and by the next century, there will be 14 billion.
Birth rates have decreased along with mortality rates, although death rates have decreased more quickly. In most affluent countries, there are approximately 1.6 births for every death, but in less developed countries, the ratio is closer to 3.3 births for every death. Every twelve years, a billion more people live on the planet.
Reasons Behind the Quick Population Growth
• A rise in the distribution and production of food.
• Gains in the field of public health
• medical technology, as well as improvements in education and living standards in many poor countries.

The Environment (Protection) Act
In 1986, the Environment (Protection) Act was introduced. Concern over the environment’s declining condition grew, leading to the passage of this act to safeguard it. The goal is to plan, organize, and carry out the long-term requirements for environmental safety as well as to oversee and coordinate the development of an effective system for responding to environmental emergencies.
If we want to protect our environment, we must move far more quickly to execute this legislation. Food cycles are disrupted and species are lost when dangerous substancesare present in the atmosphere and aquatic environments in excess.
The Environment Act of 1986 has a Global Context in Addition to Aignificant Constitutional Ramifications.
• This act put into practice the spirit of declaration approved by the United Nations Conference on Human Environment, held in Stockholm in June 1972.
• In the 1970s, environmental protection gained national priority because to the significant growth in damages.
• Food chains are disrupted and species are lost when there are excessive quantities of dangerous substances in the atmosphere and aquatic habitats.
• Goals
• Clearly defining what environmental conservation is.
• Determining the generally acknowledged regions that pose a threat to the life support system.

The productivity of waste lands is extremely low, and the individuals who own them are impoverished and compelled to work for pay. Wastelands are therefore seen as a potent weapon for combating the problems of poverty and backwardness.
Definitions
Water and land are essential for the development of agriculture. Wasteland is eventually created when there is a decrease of vegetation cover, which causes erosion to take place. Waste lands are large areas of land that have been degraded and are rather difficult to plough.
The National Wasteland Development Board (NWDB) and the Planning Commission established a Technical Task Group. According to this group, wastelands are areas of deteriorated land that are currently underutilized due to various constraints, withthe exception of current use  (CSIR 1990). Depending on the random elements, the wastelands could be categorized under
1. I.erosion caused by water
2. Erosion caused by wind and
3. The Alkalinity and Salinity
The arid, stony, steeply sloped, and snow-covered wastelands are examples of the uncultivated wastelands.

Climate
This refers to the long-term statistical data of temperature, humidity, wind, precipitation, atmospheric particle count, and many other meteorological parameters in a particular area. However, weather refers to the current state of these same elements over a maximum of two weeks. The statistical long-term representation of the shortterm weather is called climate. A region’s “climate” is its average long-term weather. Temperature and readiness determine the climate. The variations between the average circumstances at two different times can be used to define changes in the climate. The atmosphere, seas, ice sheets (cryosphere), living things (biosphere), and soils, sediments, and rocks (geosphere) all contribute to and are a part of the global climate system.
When the sun falls on moisture droplets in the earth’s atmosphere, a spectrum of light appears in the sky, creating an optical and meteorological phenomenon known as a rainbow.
A wilderness is an area of the planet’s natural ecosystem that has not seen major alterations from human activities.
The atmosphere, a body of gases or air around the earth, shields it from harm and makes life possible. The planet’s atmosphere is primarily made up of nitrogen, with only 21% being oxygen; the remaining little portion is made up of carbon dioxide and other gases. The earth is divided into five separate layers, ranked from lowest to highest:

Introduction
The lives of the local population are disrupted by large-scale projects such as dam construction, mining, highway construction, or the designation of a national park, and they are frequently forced to relocate to a new location. Relocating individuals is a significant challenge as it diminishes their capacity to survive solely on their customary natural resource base and intensifies psychological strain. 33 to 56 million people have been displaced by 54 projects in India over the past 50 years.
Resettlement and Rehabilitation of People
Major projects like dams, mines, expressways, and other industrialization-related projects, as well as some conservation strategies like the creation of national parks, can cause disruptions to people’s lives and force them to relocate to an alternate location. Relocating individuals from their birthplace is a grave concern as it diminishes their capacity to survive only on their customary natural resource base, so adding to their psychological strain. It is difficult for the displaced individuals to adjust to a new lifestyle in a new location. Due to the indirect effects of the Green Revolution—the building of thousands of dams since India’s independence—thousands of people havebeen displaced. These impoverished locals have essentially paid for the construction of the dams. Even if the government has set enough time to relocate these displaced individuals and offer them a sufficient package for rehabilitation, this rarely happens.

Water Scarcity Issues
The world is running out of clean water. The subsurface water table decreases and surface runoff rises as a result of deforestation. The amount of water stored underground is decreasing as wells are being dug deeper and deeper. As a result of desertification and deforestation, perennial rivers are turning seasonal. There is not enough potable drinking water because of abuse and overuse.
Conserving Water
• In certain situations, manipulating plants, harvesting water, and other techniques might increase the availability of water supplies.
• Water use reduction achieved by the application of water efficiency or conservation techniques; alternatively,
• Better techniques for managing water can either decrease or increase the useful use of water.
• Any activity, behavioral modification, tool, technology, or better design or procedure used to lower water loss, waste, or use is referred to as a water conservation method.
• One method of conserving water is water efficiency.
Among the Objectives of Water Conservation Initiatives
• The goal of sustainability is to guarantee that water extracted from an ecosystem will not be lost faster than it naturally replaces itself for future generations.
• The pumping, delivering, and treating of water results in energy conservation.
• Habitat conservation includes limiting the amount of water used by humans, which lessens the need to construct new dams and other water diversion infrastructure while also preserving freshwater habitats for nearby species and migratory waterflow.

Sustainable Development
Although the term “sustainable development” is frequently overused, it is essential to addressing a multitude of interconnected global concerns, including hunger, poverty, inequality, and environmental degradation.
Several environmental movements from previous decades gave rise to the concept of sustainable development. Major international gatherings, like the 1992 Rio Earth Summit, were crucial in advancing the cause of sustainable development. But it seems that progress toward sustainability has not been great up to this point.
Definition
A key objective of sustainable development is to achieve a reasonable and equitable distributed level of economic well-being that can be continuously perpetuated for many human generations. Sustainable development is defined as a pattern of social and
structured economic transmissions (i.e., development) that optimizes the economic and societal benefits available in the present without jeopardizing the likely potential for similar benefits in the future.
“Development that meets present needs without compromising the ability of future generations to meet their own needs” is another definition of it.
Salient Aspects of Ecological Development
1. It takes equity into account between nations and continents, racial and socioeconomic groups, gender, and age.
2. It encompasses environmental requirements as well as social development and economic opportunities.

Introduction
In the past, the approach to disaster management was relief-focused and restricted to helping the area affected by the disaster. involves a continuous and integrated process of organizing, coordinating, and putting into action measures that are required or advantageous for preventing danger or threats, mitigating risk or its severity or consequences, building capacity through research and knowledge management, being ready to deal with any disaster, responding quickly to any situation that poses a threat to the community, determining the extent or severity of effects, evacuation, rescue and relief efforts, rehabilitation, and reconstruction.
Phases and Elements in Disaster Management
I. Pre-disaster phase: There are three components to the pre-disaster phase: preparedness, mitigation, and prevention.
II. The aftermath phase, encompassing response, recuperation, and restoration. All these components are connected by a structure of institutions and legislation.

Introduction
There are always going to be natural disasters like cyclones, earthquakes, and floods. They are a component of our surroundings. Nonetheless, the amount of damage caused by natural disasters can be reduced if there is a reliable warning system in place
and the impacted population is ready. Thus, while reactive mechanisms constituted the majority of disaster management in the past, a change towards a more proactive, mitigation-based strategy has been gradually observed in the last several years.
The field of emergency and disaster management focuses on mitigating and preventing potential hazards. It is a field that deals with anticipating catastrophes, responding to them (e.g., emergency evacuation, quarantine, mass decontamination, etc.), and helping to rebuild society following natural or man-made disasters. Generally speaking, emergency management is the ongoing process through which all people— individuals, organizations, and communities—manage risks in an effort to lessen the effect of catastrophes that may arise from those risks. The perception of danger by individuals who are exposed influences the actions that are taken.
Definition
The word “disaster” comes from the French word “disaster.”
A disaster is a state brought on by natural factors in which there is a significant disruption of services and infrastructure that has an adverse effect on the environment, the economy, and human life.

Introduction
A natural disaster refers to a significant and harmful occurrence caused by the Earth’s natural processes. Examples of natural disasters include floods, storms, tornadoes, volcanic eruptions, earthquakes, tsunamis, and other geologic phenomena. A natural calamity can result in fatalities or destruction of property, and usually leads to economic harm, the extent of which is determined by the afflicted population’sability to bounce back and the availability of infrastructure.
Categories of Natural Disasters/ Catastrophes
Floods
A flood is the result of water overflowing and covering land. According to the EU Floods Directive, a flood is defined as the temporary  inundation of territory that istypically not submerged in water. Flooding can occur when the amount of water in ariver or lake exceeds its  capacity, causing the water to overflow and breach its normal borders. The size of a lake or other body of water may alter due to seasonal variations in precipitation and snow melt. However, it is not considered a substantial flood unlessthe water submerges land that is utilized by humans, such as villages, cities, populated areas, highways, and farms.

Introduction
Human activity on the environment is the root cause of many environmental issues. The standard of the environment we live in must be each of our own concerns. The quality of our surroundings can be enhanced or degraded by our individual actions. As a result, people must feel obligated to preserve the environment by leading ethical and ecologically conscious lives.
Conservation
best possible use of human, environmental, and cultural resources in national development programs. The Latin terms “servare” (keep watch) and “con” (together) denote this.
Conservation Goals
1. Preservation of the environment’s quality.
2. Assure a steady supply of valuable material. Role of Individuals in Conserving Resources
The Diversity of Life
1. Gain an appreciation for all living things.
2. Make regular efforts to plant trees.
3. Cut back on the amount of wood and paper goods you use, recycle paper goods, and purchase recycled goods.

Overview
Humanity has produced trash since the beginning of time, whether it is from the bones and other parts of the animals they kill for food or the wood they harvest to build their carts. As civilization developed, garbage was produced that was increasingly sophisticated in character. The world of consumers emerged around the close of the 19thcentury as a result of the industrial revolution. The production of non-biodegradable solid waste led to an increase in pollution not just in the air but also on Earth itself. The rise in solid waste was also primarily caused by urbanization and population growth.
Definition of Solid Waste
Glass crockery containers, plastic containers, sludge, vehicle parts, and mounds of crop wastes are among the solid waste materials. These gather in public areas and hinder people’s regular activities.
Every family produces waste or rubbish on a daily basis. We usually toss away items that we no longer need or have any use for, which puts them in the garbage category. Depending on where it comes from, solid waste can take several forms. Understanding the proper ways to handle the trash produced has become crucial in today’s dirty world. One crucial technique for managing municipal solid waste is segregation. Representation provides a good understanding of segregation at source. Composting is a crucial waste management and treatment technique.

Thermal Pollution
The term “thermal pollution” refers to the damaging rise in temperature that occurs in rivers, lakes, the ocean, and streams. The local fish and plant life may perish as a result of this temperature increase.
Definition
Thermal pollution refers to the release of warm water into rivers. (OR) Any process that modifies the temperature of water results in thermal pollution, which is the deterioration of water quality.
Causes/Sources
Electric power stations are major contributors to thermal pollution. Burning coal or natural gas produces heat in electric power plants. Because of the high temperatures, water can be turned into steam, which powers turbines and generates electricity. The plant circulates cool water near to the heated steam in order to help condense it. The 15 oC above-average temperature of this heated water is released back into the body of water. Thermal pollution can also be caused by runoff water. Concrete is heatabsorbing and can get extremely hot. The problem of water temperature rise is also a significant issue when runoff from concrete surfaces enters rivers.

Introduction
Marine Pollution
The pollution of the sea substances that humans have directly or indirectly introducedinto the marine environment, which can have negative impacts on the ecosystem, including health risks to people, obstructions to marine activities, and a decline in the quality of seawater.
It happens when invading species or chemicals or particles or garbage from industry, agriculture, or residential sources find their way into the ocean and can have detrimental impacts.
The majority of maritime pollution originates on land. Nonpoint causes of pollution include wind-blown debris and agricultural runoff.
A great deal of potentially harmful substances stick to small particles, which plankton and benthos animals (most of which are deposit or filter feeders) then consume.
Pesticides swiftly find their way into marine food webs after entering the marine ecology. These pesticides can induce diseases and mutations once they enter food webs, which can be dangerous for both humans and the entire food chain.
Marine food webs may also be exposed to toxic metals. These have the power to alter biochemistry, behavior, reproduction, tissue composition, and growth inhibition in marine organisms. Additionally, a lot of animal diets contain a lot of fish meal or fish hydrolysate. Toxins from the sea can thus spread to land animals and then show up in meat and dairy products.

Introduction
The term “noise” originates from the Latin word “nausia.” There are negative repercussions of noise pollution on our bodies and minds. In general, the amount of noise and the length of exposure determine how much noise pollution there is. These
days, noise is a constant in our lives due to the advancements in industry, technology, and machinery.
Definition
Unwanted sound released into the atmosphere that poses a health risk is referred to as noise pollution.
The term “unwanted or unpleasant sound that causes discomfort” refers to nose pollution.
Another definition of noise pollution is “wrong sound, in wrong place at wrong time.”
Distinction Between Noise Pollution and Sound Pollution:
Sound is defined as the lowest level of 50 dB that is pleasant to listen to. Noise pollution is defined as any sound that is louder than 95 dB and bothersome to listen to.
Sources of Noise Pollution
1. Factories and industries, community and religious activities, and modes of transportation (air, train, and road) are the primary sources of noise pollution.
2. In metropolitan regions, automobiles, factories, industries, railroads, and airplanes are the main man-made sources.

Introduction
In the global perspective, water contamination is a significant issue. Every day, it is the cause of almost 14,000 deaths. The most valuable natural resource on Earth is water, which makes up more than 70% of its surface.
Definitions
• The term “water pollution” refers to the contamination of water bodies by human activity, which can be detrimental to the plants and organisms that call thesem bodies of water home. It can be characterized as any alteration in the quality of water brought about by human activity that makes it less suitable for any of its positive uses, actual or potential. Excess of any substance or heat that could endanger people, animals, or aquatic lifeMan’s actions alter the quality or composition of water, either directly or indirectly, making it unfit for any purpose.
Sources of Water Pollution
• Point source pollution, which is defined as pollution having a distinct source and point of entry into the water, making it easy to identify. It describes impurities that find their way into a waterway by a covert channel, like a ditch or pipe. For instance, contaminants include metals and organics in municipal and industrial discharge pipelines.

Pollution
The Latin word “polluere,” which meaning to “soil” or “defile,” is the source of theEnglish word “pollution.” Unwanted changes in our environment that negatively impact humans, animals, and plants are known as pollution.
Any unfavorable alteration to the physical, chemical, or biological properties of any element of the environment (air, water, or soil) that has the potential to negatively impact a variety of life forms and property is referred to as environmental pollution.
Substances that are produced by human activity and are present in greater quantities than they would naturally be—solid, liquid, or gaseou —and that negatively impact our environment are referred to as pollutants.
Three Categories of Contaminants Exist
• Pollutants that break down or are not persistent: Natural processes rapidly decompose them. For instance, leftover veggies, home sewerage, etc.
• Pollutants that degrade slowly or are persistent: These are bad for the environment and take decades to break down. For example, most plastics and DDT (pesticides).
• Non-biodegradable contaminants: These have long-term negative effects on the environment and public health since they cannot be broken down by natural processes. For instance, radioactive waste and toxic materials like lead or mercury.

Introduction
The richness of a country can be measured by its biological diversity. It is essential to both human existence and financial security. The most basic concept of biodiversity is expressed by the diversity of creatures. Biodiversity is represented by the supplies of food, clothing, shelter, and medicines provided by plants; by the sources of food, assistance, wild life, and human resource efficiency provided by animals; and by the patterns of variation seen in the microbiological world. More than 20,000 kinds of ants, 3,000,000 species of beetles, 28,000 species of fish, and almost 20,000 species of orchids would be hard for the average person to believe.
Definitions
• The collection and interplay of genes, species, and ecological diversity in a specific location and time is known as biodiversity. Different genes, species, habitats, and their relative abundance are all included in the phrase biodiversity.
• The portion of nature known as biodiversity comprises the genetic variations between individuals of the same species as well as the variety and richness of all plant and animal species at various spatial dimensions, such as a region, a nation, and the entire planet.
• “The diversity of life, which encompasses ecosystem or community diversity, species diversity, and genetic diversity, and includes the entire range of variety and variability within and among living organisms and the ecological complexes in which they occur,” is another definition for it.

Introduction
An ecosystem is any unit that consists of all the creatures, or communities, in a certain area that interact with the physical environment to produce a trophic structure, biodiversity, and material cycle within the system. Various biosphere ecosystem types are
1) Natural ecosystems
2) Man-made ecosystems
Natural Ecosystems
Under natural conditions, these ecosystems function independently with little to no significant human intervention. These are further separated as follows based on the specific type of habitat:
• Terrestrial: grasslands, deserts, and forests
• Aquatic (open to the water), which is further subdivided into

Introduction
Food Chains
Food chains are made up of organisms that eat and are devoured by one another as a means of transferring energy from the source in plants. “The transfer of energy from plants through a series of organisms with repeated eating and being eaten” is one definition of it.
A food chain is the movement of energy from producers at one trophic level to consumers at the next. In a food chain, energy moves only in one direction. An understanding of food chains can provide important insights into how ecosystems work.
• Grazing food chain
Grazing food chains and detritus food chains are the two main categories of food chains.
The food chain known as grazing begins with living green plants, moves through grazing herbivores, and ends with carnivores. Such a food chain places an immediate demand on ecosystems for solar radiation. From an energy perspective, these chains are very significant.

Introduction
The study of energy flow through the ecosystem is known as Ecological Energetic. Ecological Energetic is the scientific discipline that investigates the movement ofenergy within an ecosystem. The process of energy transfer that takes place within a food chain is referred to as energy flow. The functioning of all species in an ecosystem is dependent on the energy they derive from the energy flow. The ecosystemsustains itself and achieves stability through the process of energy transfer.
Energy Transfer/Flow
Solar energy is the primary source of energy that enters the food chain at the level ofproducers, which are plants. Through the process of  photosynthesis, plants utilize solar energy to transform it into chemical energy, which is then used to produce various components of plants such as leaves, flowers, fruit, branches, trunks, and roots. Plants are referred to as producers in the ecosystem because they have the ability to transformthe sun’s energy directly into their tissues, allowing them to thrive. Herbivores consume the plants as nourishment, so obtaining energy. A significant portion of this energy is expended on the metabolic processes of these organisms, including respiration, digestion, tissue growth, blood circulation, and body temperature regulation. Energy is also expended in activities such as foraging, seeking refuge,reproducing, and nurturing offspring. The predators rely on the herbivores as their source of food.

Introduction
The ecosystem recycles nutrients. Approximately forty chemical elements are thought to be necessary for the existence of living things. The earth’s system contains finite materials, hence the only way to maintain it functioning continually is to regenerate the components.
Definition
The term “biogeochemical cycle” refers to the periodic transfer of elements between living organisms (the biotic phase) and their non-living ,(abiotic) environments, such as rocks, water, and air. These cycles, which primarily involve water, oxygen, carbon, nitrogen, and phosphorus, are essential to life.
While micronutrients like Cu, Fe, and Co are derived from soil-based edaphic cycles, macronutrients like C, H, O, P, K, N, S, Mg, and Ca are cyclized with the atmosphere.There are two types of bio-geochemical cycles: gaseous and sedimentary cycles. The soil serves as the primary reservoir for nutrients in sedimentary cycles, such as the phosphorus and sulfur cycles, while the atmosphere and oceans serve as the primary reservoirs for nutrients in gaseous cycles, such as the nitrogen, carbon, and oxygen cycles. The biotic and abiotic systems are involved in both cycles. Both are fueled by energy flow and connected to either the hydrologic or water cycles.
• The nitrogen cycle, which involves gaseous components, is the naturalprocess by which nitrogen and nitrogen-containing molecules are transformed.

Introduction
• Biosphere: Living things and the non-living systems that support them in their surroundings are intricately linked and mutually influence one another. Living things inhabit a comparatively small sphere that spans the surface of the globe, measuring less than 20 km in thickness and spanning roughly 8 km above and 10 km below sea level. The biosphere is the thin layer of soil, water, and land that covers the surface of the world. The land (lithosphere), the water (hydrosphere), and the air (atmosphere) are its three non-living constituents.
• Lithosphere: The solid portion of the earth is made up of the rocks and soil found both underneath and on the surface. About 4.6 billion years ago, a hot ball of substance gave rise to the earth and the lithosphere. Just eight of the 92 elements that make up the lithosphere are frequently found in crystal rocks. Of these components, 47% are oxygen, 28% are silicon, 8% are aluminum, and 5% are iron. The other ingredients are calcium, magnesium, sodium, and potassium, each making up 4%. When rocks break down, they create soil, which is what humans need for agriculture.
• Hydrosphere: The hydrosphere is the area of the earth that is covered in water. It encompasses 0.7 of the planet’s area. Only a minorportion  of the hydrosphere is made up of fresh water; the majority of the hydrosphere is made up of the marine ecosystem

The Resource of Land
One limited natural resource is land. The resource-generating regions found in terrain forms such as hills, valleys, plains, river basins, and wetlands are essential to the livelihood of the inhabitants. An ordered combination of minerals, organic matter, living things, air, and water is called soil. The soil is bound together by grass and tree roots. Land becomes unproductive and turns into wasteland when trees are reduced in size or grasslands are overgrazed.
Land is a valuable resource because it supplies the necessary substrate for the growth of vegetation, forestry, agriculture, and other industries. Approximately 54% of India’s land is used for agriculture. Land is necessary for man to construct dwellings, cultivate food, maintain pastures for domesticated animals, create towns and cities to support industries, and develop industries to produce things.
Degradation of Land
It can be characterized as any alteration to the land that lowers its quality or condition and, consequently, its capacity for yield. It happens anytime human activity alters the natural equilibrium of the environment through abuse or overuse. The main issues with land degradation are:
• Erosion by wind
• Water erosion including large-scale hillside movement
• Salinity of dry terrain
• The salinity caused by irrigation
• Surface scorching of soil
• Logging using water

Introduction
Energy is necessary for people, ecosystems, and living things to function. The effects of energy generation and use on the  environmentdetermine life quality. Our main source of energy comes from the sun. Energy is used by humans for running transportation, producing industrial items, farming, and residential use.
Definitions
Energy is the ability to do tasks.
Resource: Anything we obtain from our surroundings in order to fulfill our needs and wants. A natural resource is any substance or energy that comes from the environment and is utilized by all living things, including humans. Examples of natural resources include air, water, soil, minerals, plants, and wildlife.

Introduction
Food is a basic human need that is necessary for survival. The three main sources of our food are fishing, farming, and animal husbandry. Modern agricultural practices are unsustainable and employ enormous amounts of pesticides and fertilizers, which pollute the environment. October 16th has been designated as World Food Day.
Global Food Issues
• The rate of food production is not keeping up with the increasing demand.
• There are significant differences in the accessibility of wholesome food. Malnutrition is still a major issue for several tribes, particularly for women and children.
• Our rich soils are being depleted more quickly than they can replenish themselves.
• The conversion of wetlands, meadows, and forests to agricultural usage has resulted in significant ecological issues.
• There is an indication of exhaustion in our upland and marine fish resources.

Introduction
A mineral is a naturally occurring substance that possesses distinct physical qualities and a specific chemical makeup. An ore is a mineral or group of minerals that can be used to extract a useful substance, such a metal, and use that substance to makeother useful commodities. In  the crust of the earth, minerals are created over millions of years. These nonrenewable resources are crucial to the advancement of modern civilization. India’s mineral resources are confined to a small number of places and are unevenly distributed. The Chotta Nagpur Plateau region contains almost 90% of our mineral riches. Mining is the procedure used to extract minerals from the earth.
Mining Activities Move Through Four Phases
Mining Procedure
Mining activities move through four phases:
a) Prospecting: Mineral exploration
b) Exploration: Determining the deposit is dimensions, form, location, and economic worth.
c) Development: The process of making the deposit accessible so that minerals can be taken out of it.
d) Exploitation: Mining the minerals and taking them out.

One of the most significant natural resources is water. The water cycle sustains hydrological systems, which give rise to rivers and lakes and a range of aquatic habitats, through evaporation and precipitation. Only 3% of the water on Earth is freshwater, although making up 70% of the planet’s surface. Just 1% of this is useable water found in rivers, lakes, and subsurface aquifers, while 2% of it is represented by polar ice caps. Approximately 25% of water is used for industry globally, 70% of it for agriculture, and only 5% for residential consumption. In India, 7% is used for industry, 90% is used for agriculture, and 3% is used for household use. World Water Day is on March 22nd.
There are five oceans on Earth. oceans: the Pacific, Indian, Atlantic, Arctic, and Southern. One of the main saltwater bodies in the hydrosphere is called an ocean. The average salinity of the ocean is around 35 parts per thousand (ppt), or 3.5%. A river is a naturally occurring waterway that is longer than 18 meters (60 feet), usually freshwater, that flows toward one or more rivers, lakes, seas, or oceans. A component of the hydrological cycle are rivers.
A steam is a current-filled body of water that is contained between the banks of a stream and a bed. Typically, the watercourse’s width is under eighteen meters. It reunites disparate environments. Creeks are tributaries of streams that join rivers or other streams but do not flow into the ocean.
A lake, derived from the Latin lacus, is an inland body of water that receives waterfrom a river and is deeper and larger than a pond.