eChapters

Abstract
 
Opencast mining destroys the original land ecosystem and microbial community due to mining and stockpiling of mine rejects on adjoining land, which is a matter of great environmental concern. Mining creates formation of wastelands, formation of gullies, ravines, overburdens, reduced water infiltration and increased runoff. Reclamation of mined out areas is often difficult due to its chemical, physical and biological traits. Absence of topsoil is the most common feature of the mine spoils dumps. Arbuscular mycorrhizal fungi (AMF), the synonym of VAM fungi, are important microbes of soil that form symbiotic association with most of the terrestrial plants on the earth. Observations led to use of legume microsymbionts as biological substitutes for fertilizers. AMF diversity increases with species diversity of plants as the potential number of association increases. Dominant arbuscular mycorrhizal fungi can prevent the invasion of non-mycorrhizal plants on land where they have established symbiosis and promote their mycorrhizal host.

General Introduction 
Growing populations and industrialisation around the world are driving up energy demand, which increases reliance on fossil fuels. The World Energy Forum projects that global stocks of fossil fuels like coal, natural gas, and oil will run out in less than ten years and decades [1]. Fossil fuels account for 88.1% of total energy consumption; they include coal (43%), oil and other liquids (23%), waste (6%), natural gas (6%), and biomass (24%). Hydroelectricity, and nuclear energy, on the other hand, share relatively small percentages of energy (1% and 2%, respectively) [2]. Petro-diesel, also known as petroleum diesel, is currently utilized as a fossil fuel and is created when crude oil is fractionally distilled at temperatures between 250°C and 350°C under atmospheric pressure. Once heated to a certain degree, the different types of diesel fuel are formed via the vaporization of hydrocarbon chains and the isolation and blending of constituents in a prescribed ratio. Typically, 25% of the petrodiesel’s composition consists of aromatic hydrocarbons and 75% of saturated hydrocarbons. The combustion of diesel fuel releases sulfur, nitrogen, and particulate matter into the environment, which are all present in significant concentrations in petro-diesel. Moreover, burning fossil fuels has resulted in several environmental problems, such as greenhouse gas emissions (GHG), which have a major impact on global warming, climate change, and a host of other chronic illnesses [3]. India is ranked as the fourth-biggest importer and user of petroleum products and crude oil. With demand for oil reaching about 4.1 million gallons per day in 2015, there is a growing disparity between India’s oil supplies and supply. The IEA analysis predicts that beyond 2050, there won’t be any oil reserves and that India’s oil consumption will increase by 6.0 million barrels per day to 9.8 mg/d in 2040 [4]. Two-thirds of the growth in oil demand and 16% of the increase in

Nanotechnology has emerged as a revolutionary force in the food industry, providing innovative solutions to improve food quality, safety, and usefulness. Researchers have devised novel ways to numerous issues in food production and preservation by harnessing nanoparticles' unique traits, such as their high surface area-to-volume ratio and customizable physicochemical characteristics. Nanotechnology-enabled food additives provide a wide range of benefits, including improved texture, taste, color, and nutritional value, as well as increased shelf life and microbiological safety. Furthermore, nanoparticles are effective transporters for bioactive chemicals, allowing for targeted and regulated release within the food matrix.

Agriculture serve as a backbone in improving economic growth of a country as well as it provides a base in meeting various needs of people in direct and indirect ways. The recent advancement in nanotechnology has shown a path to develop traditional agriculture into a sustainable practice. Several nanochemicals emerged as promising agents for better plant growth, used as fertilizer, pesticides, control weeds and also used as antimicrobial agents in food packaging. Nanotechnology may act as sensor for checking soil health of agriculture fields.

At an Agri Summit, I had a very difficult task to chair a session on “Sustainable Future”, with two well-known but extremely opposite personalities. On my left was a globally well-known environment activist talking about all the evils of chemical fertilizers and chemical pesticides. On my right was the President of Pesticide Association with equally strong views about how the chemical pesticides have greatly helped in feeding the hungry world. My task was further made difficult by a large lobby of green activists in the audience and also a number of seasoned industrialists with opposite views. Such a scenario is becoming increasingly common.

Bioshields offer barriers of vegetation, shrubs, small and big trees and if integrated as a well designed system they can greatly help our coastal as well as inland areas. Though primarily looked at for coastal regions, under a broader definition Bioshields can play important role in semi-desert areas, hills, etc. also.

Why Bioshield?

Bioshields or Biobarriers can make a major contribution in minimizing the effects of storms, cyclones and Tsunamis and at the same time offer short and long term ecological and livelihood benefits.

Abstract

Indigenous water saving technologies in arid and semi-arid environment is a local traditional practice for effective use of the limited water supply. These technologies can be used as a base for future development that can be made on these technologies through incorporating the current industry tools. The importance of studying the indigenous knowledge and practices is that it can help to develop enhanced versions of these technologies, and to understand the ability of local communities to adopt the newly developed technology. In Sudan, several indigenous water saving approaches has been used by local societies at various scales. An insight for these technologies, their strength and weaknesses are given here. On “Haffir” (water ponds), Wadi control, and water diversion methods were used for a long time of history for water collection and conservation. At farm scale, terraces, mulching, intercropping, low tillage, fallow, low-water consumption crops and fast maturing crops are common indigenous water saving technologies. Traditional water storage in trees such as Baobab and water-melon is an indigenous proactive along the history in western Sudan to store rain water for long dry season.

Why Water Budget?

The reliability of water supply in desert regions is at risk due to a multitude of issues including low rainfall, low snow runoff, court-ordered water transfer restrictions and hence higher price of wholesale water. Agencies in desert regions understand the importance of improving water supply reliability, facilitating better water storage, adapting to changing climate patterns and reduced precipitation, improving Environment and Water Quality.

The Desert regions have always fought back the perpetual water scarcity with infrastructure designed around saving water and utilizing alternative water resources. Off late, not only new construction but also new policies and programs have added to their water conservation activities.

One such program attends to the fair distribution of water by tending to consumers who are price sensitive and hence use water without wasting it and by extra-charging those who do not know where to put a stop to their wasteful water use.

Rivers are the most important system for water, for irrigation and human settlement. Historically, civilizations always nucleated near rivers, and latter also had social and religious significance. Rivers in India are considered holy and play the most important part in the lives of people, fauna & flora and the future environmental system.

The Ganga Basin is the largest river basin in India which includes the Ganga, the Yamuna, the Ghagra, the Gandak, the Kaveri basin etc. Compared to these, the Vishwamitri River, situated between Mahi River in North and Narmada River in South in Central Gujarat is a small seasonal river but it is very important for the city of Vadodara and Central Gujarat region. This seasonal river originates from Pavagadh hills and flows east to west. It is a typical small river with the kind of problems in most rivers in India and other countries – liquid and solid wastes, enouncements, blocking of water ways, floods in monsoon months and dry dumping basin during most other months etc.

Abstract

The UAE Space Reconnaissance Center (SRC) is accounted as a major national and regional source of up-to-date geospatial data, with direct reception of IKONOS, IRS and KOMPSAT satellite imagery as well as access to some other satellite and aerial imagery resources; an activity which covers the whole Middle East region. The main concern in monitoring the environment of UAE and surrounding countries is the desertification process, the monitoring of which requires careful watching of the sand movement and some other relevant features.

This paper throws light on the role of various types of satellite images in monitoring desertification, by utilization of IKONOS, IRS Pan and Landsat TM images covering part of Liwa and Alain areas, representing the two main dune regimes; Liwa and Manadir, which constitutes the northeastern edge of the Empty Quarter sand sea.

The availability of high resolution images makes it possible to detect the yearly or even seasonal sand movements, being controlled by the prevailing wind conditions and distance from the main sand source. The results clarify that movements of up to 25m was encountered at some small sand dunes and about 10m for larger sand dunes, towards the SSE and SSW in Liwa area. In Rimah area a movement of up to 30m was noticed at a small sand dune towards the ENE and about 12m shift in the hinge of a larger sand dune towards the NW. Temporary or permanent ? movement of thin sand sheets can reach 100’s of meters, was easily detected on Landsat images; ~ 25km NE of Alain city. The 5m panchromatic images, on the other hand, helped in tracing sand movements measured in few 10’s of meters, and interpretability of such images was enhanced by merging them with Landsat imagery.

Our Soils – Our Waters & COP22

In the last several decades many international forums and institutions have discussed and agreed that food and water security are the most important issues for the future. The damage to the ecology directly affects the food, land, water, health and the livelihood. Agricultural progress serves as the best way to fight poverty, hunger and livelihood problems.

Though in the last few decades, billions of pages about hunger, food and water security have been written, thousands of conferences have been organized, the urgency of action plans and creating holistic models is the most important need. For this, we must require bold reforms and action oriented programs which can reach the smallest farmers and give an optimistic signal rather than a despondent picture. Developmental models that are holistic and close to nature, sustainable and based on inclusiveness considering ‘unto the last’ women and man are the need of the day.

16.1 Introduction

It is well known fact that planners as well as end user’s have to consider any resources as technology from economic point of view. Therefore, it is important to have techno – economic analysis of each energy source option. In the feasibility study of particular energy option, three tier judgement approaches is required, which include technical feasibility, economical viability and social acceptability. Hence in the rural energy planning programme one has to considered techno socio economic analysis of an individual energy option. Since in integrated rural energy planning, locally available energy resources are used, presuming that it is socially recognized. Hence in the IRPE project, the need and scope of techno economic analysis in terms of economic analysis of different technical feasible options, before between “economic” and “financial” analysis should be kept in mind. An economic analysis is needed to verify that a particular energy source will provide “net benefit” to society as a whole, before its final integration in the energy context, while a financial analysis integrated in the energy practices. In simple wards, a financial analysis is concerned with goods and services, money inflow and outflows and the transfer of payments. An economic analysis also considers the social benefits and costs of goods and services which are not traded in a market.

1.1 An overview of biomass

Biomass is an abundant and renewable energy source that has the potential to meet the growing need for clean and sustainable energy solutions. This chapter provides an overview of biomass, its potential, and conversion technologies, which include various techniques for transforming biomass into useful forms of energy such as heat, electricity, and biofuels.

Biomass is an organic substance that can be obtained from agricultural crop waste, forest waste, animals, and microorganisms. It can be used as an energy source or a primary material in various applications. The energy in biomass is derived from photosynthesis, in which plants convert sunlight, carbon dioxide, and water into organic matter.

4.1 Introduction

Baling biomass is a crucial technique in efficiently managing and utilizing agricultural crop residue. This chapter explores the process of baling, which involves compacting biomass materials into standardized bundles for easier handling, storage, and transportation. From agricultural residues to forestry waste, the chapter delves into various types of biomass suitable for baling, the equipment used, and the benefits of this technique. It also discusses the environmental impact, economic considerations, and emerging trends in baling methods. Through in-depth analysis and practical insights, this chapter offers a comprehensive understanding of how baling contributes to sustainable biomass management and resource optimization.

In simple words natural resources can be defined as any part of our environment such as land, air, minerals, forest, rangeland, wild life, fish and human beings.

The sum total of all physical, chemical, biological and social factors which compose the surroundings of man is referred to as environment and each component of these surroundings constitute a “resource”.  The natural resources are land, water, air, minerals, forests, rangeland, wild life or even human beings known as natural resource.

The five basic natural resources are energy, matter, space, time and diversity.

Natural-fibre-reinforced green composites represent an important alternative to conventional synthetic-fibre composites. This chapter examines renewable fibres such as hemp, jute, flax, and sisal and their integration with bio-based polymer matrices. The discussion covers material composition, processing methods, environmental considerations, sustainability, applications, advantages, limitations, and current research developments. Natural fibres offer low density, renewability, biodegradability, and cost advantages, although hydrophilicity, variability, and processing limitations can affect composite performance. Surface treatments and appropriate fabrication methods are therefore important for improving mechanical, thermal, and durability characteristics. Applications in automotive, construction, packaging, and biomedical sectors demonstrate the growing potential of these sustainable composite materials.

The development of green nanocomposites requires more than replacing conventional materials with renewable alternatives; it also requires responsible sourcing, efficient resource utilization, and consideration of the complete material life cycle. This chapter examines green and eco-friendly nanocomposites from the perspective of sustainable material selection and circular economy principles. It discusses strategies for obtaining renewable raw materials, reducing environmental impacts, improving resource efficiency, and designing materials for reuse, recycling, and recovery. Applications of green nanocomposites are also considered in relation to sustainability objectives. By connecting material development with circular economy strategies, the chapter provides a framework for developing nanocomposites that combine functional performance with reduced environmental burden.

Introduction

Flat plate collector is the heart of a solar heat collection system designed for delivery of heated fluid in the low to medium temperature range (5o70oC above ambient temperature) for applications, such as water heating, space heating, drying and similar industrial applications. The flat plate collectors absorb both beam and diffuse radiation. The absorbed radiation is converted into heat which is transferred to water or air flowing through the collector tubes or duct, respectively. Such collectors do not require tracking of the sun and little maintenance is required.

The conventional flat plate solar air heater, shown in Fig. 7.1, consists of a flat blackened absorber plate, a transparent cover (such as a glass cover) at the top and insulation at the bottom and on the sides. The air to be heated flows through the rectangular duct below the absorber plate. The glass cover transmits a major part of solar radiation incident upon it to the absorber plate where it is converted into heat. The glass is, however, opaque to longwavelength radiation and thus it does not allow the infrared radiation from the heated absorber plate to escape.

Karwa et al. (2002) have presented the following deductions of heat collection rate and pumping power equations for the flat plate solar air heater.

Introduction

The sun is an abundant source of solar energy (average value on horizontal surface 6 kW m^-2 day^-1), which is freely available. This huge source of energy is non-polluting and inexhaustible in nature. It has the potential of supplementing the conventional energy sources to a great extent. There is acute shortage of conventional energy sources, which affects the overall development. Work on the utilization of such a huge, non-polluting and everlasting energy source has been carried out at CAZRI, Jodhpur for various domestic, industrial and agricultural applications in order to supplement the energy demand. This includes the development of a lot of solar thermal devices, such as, solar still, solar dryer, solar cooker, animal feed solar cooker, solar candle device and cool chamber. The details of some of these devices are given as following.

Introduction

The thermal performance of a building refers to the process of modeling the energy transfer between a building and its surroundings. For a conditioned building, it estimates the heating and cooling load and hence, the sizing and selection of HVAC equipment can be correctly made. For a non-conditioned building, it calculates temperature variation inside the building over a specified time and helps one to estimate the duration of uncomfortable periods. These quantifications enable one to determine the effectiveness of the design of a building and help in evolving improved designs for realizing energy efficient buildings with comfortable indoor conditions. The lack of proper quantification is one of the reasons why passive solar architecture is not popular among architects. Clients would like to know how much energy might be saved, or the temperature reduced to justify any additional expense or design change. Architects too need to know the relative performance of buildings to choose a suitable alternative. Thus, knowledge of the methods of estimating the performance of buildings is essential to the design of passive solar buildings.