eChapters

Introduction
The richness of a country can be measured by its biological diversity. It is essential to both human existence and financial security. The most basic concept of biodiversity is expressed by the diversity of creatures. Biodiversity is represented by the supplies of food, clothing, shelter, and medicines provided by plants; by the sources of food, assistance, wild life, and human resource efficiency provided by animals; and by the patterns of variation seen in the microbiological world. More than 20,000 kinds of ants, 3,000,000 species of beetles, 28,000 species of fish, and almost 20,000 species of orchids would be hard for the average person to believe.
Definitions
• The collection and interplay of genes, species, and ecological diversity in a specific location and time is known as biodiversity. Different genes, species, habitats, and their relative abundance are all included in the phrase biodiversity.
• The portion of nature known as biodiversity comprises the genetic variations between individuals of the same species as well as the variety and richness of all plant and animal species at various spatial dimensions, such as a region, a nation, and the entire planet.
• “The diversity of life, which encompasses ecosystem or community diversity, species diversity, and genetic diversity, and includes the entire range of variety and variability within and among living organisms and the ecological complexes in which they occur,” is another definition for it.

Water Scarcity Issues
The world is running out of clean water. The subsurface water table decreases and surface runoff rises as a result of deforestation. The amount of water stored underground is decreasing as wells are being dug deeper and deeper. As a result of desertification and deforestation, perennial rivers are turning seasonal. There is not enough potable drinking water because of abuse and overuse.
Conserving Water
• In certain situations, manipulating plants, harvesting water, and other techniques might increase the availability of water supplies.
• Water use reduction achieved by the application of water efficiency or conservation techniques; alternatively,
• Better techniques for managing water can either decrease or increase the useful use of water.
• Any activity, behavioral modification, tool, technology, or better design or procedure used to lower water loss, waste, or use is referred to as a water conservation method.
• One method of conserving water is water efficiency.
Among the Objectives of Water Conservation Initiatives
• The goal of sustainability is to guarantee that water extracted from an ecosystem will not be lost faster than it naturally replaces itself for future generations.
• The pumping, delivering, and treating of water results in energy conservation.
• Habitat conservation includes limiting the amount of water used by humans, which lessens the need to construct new dams and other water diversion infrastructure while also preserving freshwater habitats for nearby species and migratory waterflow.

Introduction

The tropical evergreen forests of the Sahyadris or the Malnad region of Karnataka is one of the richest plant areas (“hot spots”) on earth and crucial to the oxygen supply of the world. More than 30,000 varieties of wildlife and plants and over 8,000 said to unique are reported to lie here. Unless reckless deforestation is halted soon, some scientists fear that within the next 100 years this virgin forest could become an arid wilderness.

Agriculture is one of the major age-old occupations of human beings providing food to the people and also supplies raw materials to a number of agro based industries. However the expansion of agricultural fields in the dense woody forest areas has brought about many environmental problems and thereby degraded the quality of environment in ecologically most sensitive areas like Uttar Kannada District. In India, agricultural practices are primarily based on the traditional system of intensive subsistence forming. It is also observed that more and more available area (forest) has been brought under cultivations to feed the population which has been growing at an alarming rate. The agricultural expansion and population growth, in forest areas of Uttar Kannada Districts have degraded the quality of environment.

Pesticides are used to control plant growth (herbicides), insects (insecticides), worms  (vermicides), bacteria (bacteriocides), fungi (fungicides), and other organisms. Almost without exception, pesticides are used to benefit humans by the control of unwanted species of plants (e.g. weeds in a lawn), disease-causing bacteria (e.g., Pneumococcus, the causative agent of pneumonia), disease-carrying insects (e.g. malarial or yellow fever mosquitoes) or in controlling destruction of agricultural products by disease-causing organisms (e.g., corn-borers, the virus of anthurium blight). Although they are by and large mostly beneficial, pesticides used both properly and improperly are also “resources out of place”, that is pollutants, that are subject to normal ecological processes.

HUMAN POPULATION GROWTH

The evolution of man took place about one million years ago in response to changes in the physical environment. We learnt gradually to adapt different modes of life to varying environments and migrated different parts of the world. Human activities have had their impact on the environment, which was depending on the number of people living in  the area and  their level  of economic development. Per capita consumption of food, energy and other resources in developed countries is larger and its impact on the environment is much greater than equal number of persons living in developing countries in Africa or Asia. Therefore, the distribution of population needs to be examined in detail.

The Global Environmental Issues

 
Expansion of the scale of human activity in recent years has put so much strain on the natural environment of this planet that in some cases nature can no longer recover. The nature’s ability though recovers damage or harmful effects in one part of the world do not stop in the very area and keeps going beyond national borders and become environmental problems on a global scale, but in a limited manner.

Introduction 
Tree-based biofuels, which are made from non-edible oilseeds of perennial trees, have emerged as a renewable energy source with considerable environmental and economic benefits. Unlike annual biofuel crops, tree-based biofuels have the potential for long-term yields, soil conservation benefits, and the ability to survive on marginal terrain (Dwivedi et al.,2011). Various tree species have been identified globally for their biofuel potential, with an emphasis on sustainability and low competition with food crops (Pandey et al., 2012). In India, there is a diverse range of over 100 tree species that produce seed oil suitable for biodiesel. These oil tree species can be cultivated on non-agricultural lands, ensuring that they do not compete with food and fodder production. Globally, tree-based biofuels are crucial for energy security. Palm, jatropha, pongamia, and mahua are among the feedstocks investigated by the US, Brazil, and Europe for biodiesel production. Tree-borne oilseeds (TBOs) are critical for biodiesel generation in India, which relies heavily on fossil fuel imports. India has implemented both the National Biofuel Policy (2009) and the National Agroforestry Policy (2014). The former policy aims to replace fossil fuels with biofuels, targeting a 5% replacement by 2012, 10% by 2017, and exceeding 10% beyond 2017. The latter policy focuses on integrated land use options for livelihood, environment, and energy security. Notably, important tree-borne oilseeds (TBOs) such as Jatropha, Karanj, Mahua, and Simarouba have been efficiently incorporated into agroforestry systems, yielding beneficial results and providing a significant source of non-edible oilseeds from trees. The need for alternatives to fossil fuels is particularly urgent for countries like India, which have a vibrant economy and high consumption of fossil fuels, heavily relying on imports. Biofuels, as renewable liquid fuels derived from biological sources, have proven to be promising substitutes for oil in the energy sector (Mahapatra et al.,2021). In India, the focus on biofuels is primarily on non-edible oils obtained from tree species’ seeds since oils from food crops like corn, sweet sorghum, and soybean cannot be diverted for biodiesel production (Raju et al., 2012). Tree-borne oilseeds (TBOs) are cultivated across the country in various agro-climatic conditions, including forest and non-forest areas, as well as wastelands, deserts, and hilly regions. India has a vast potential for oilseeds derived from trees, such as Mahua (Madhuca indica), Neem (Azadirachta indica),

Biofuel crops play a crucial role in the global transition towards renewable energy. With increasing concerns about climate change and energy security, biofuels have emerged as a viable alternative to fossil fuels. However, their economic viability is influenced by various factors, including production costs, market demand, government policies, and environmental implications. The United States has been the most prominent fuel ethanol producer since 2007, followed by Brazil. Together the United States and Brazil account for 84% of the global ethanol production. European Union, China and Canada are the other leading fuel ethanol producers. Fuel ethanol production and consumption continue to rise, regardless of variations in crude oil prices. The United States is the largest producer, generating 60 billion liters primarily from corn, while Brazil follows with 33 billion liters, mainly derived from sugarcane (https://www.statista.com.) Ethanol production in India started in 1938 with recommendations to convert molasses into alcohol, eventually resulting in the enactment of the Power Alcohol Act in 1948. The Ethanol Blending Programme (EBP), introduced in 2003, mandated a 5% ethanol blend (E5). However, due to supply shortages in 2004-2005, the blending requirement was made optional. In the 2013-14 period, a total of 38 crore liters of ethanol was procured for blending with petrol. This amount significantly increased to 567 crore liters in the Ethanol Supply Year (ESY) 2022-23, achieving an ethanol blend level of E11.7. Acknowledging the substantial progress in the ethanol fuel blending initiative for a greener transition and Atmanirbhar Bharat, the government revised the target to E20 by 2025–26 and set an E30 goal for 2030 (NAAS, 2024). The proposed share of E20 is from sugarcane-based ethanol 10%, maize 7% and other damaged food grains 3.0%. The recently reported data during Jan 2025 showed the achievement of 19.6% blending in petrol (PIB, GOI, 2025)

3.1 Introduction

Nature has a provision for destroying and disposing off wastes and dead plants and animals. This decay or decomposition is carried out by tiny micro-organisms called bacteria. Making of farm-yard manure (FYM) and compost is also through decomposition of organic matter (OM). When a heap of vegetable or animal waste and weeds etc., die or decompose at the bottom of backwater or shallow lagoons, bubbles can be noticed rising to the surface of water. Sometimes these bubbles burn with dancing flame at dusk. This phenomenon has puzzled man for a long time. It was only during the past hundred years that Scientists unlocked this secret as the decomposition process. The gas thus produced was and is still called “Marsh Gas.” The technology of harnessing this gas under artificially created conditions is known as Biogas Technology.

Introduction

The COVID-19, the Global Pandemic has affected the world and is still continuing with its various mutations even today. This has created a long-lasting impact and many sectors like energy, transport, industries, and residential buildings, have critically experienced impacts from the pandemic (Qarnain, Muthuvel, and Bathrinath 2020). It has directly and indirectly impacted every household’s operations. The mandatory COVID – 19 protocols, lockdowns, Work From Home (WFH) schedules and the major fear of every one of contracting the disease if going out itself has forced people to stay indoors and forced residents to use more energy for their daily routine activities, (routines like watching more TV, using environment control devices like fans, AC, room heaters etc.) giving rise to higher energy usage resulting in high energy bills and subsequent scarcity in the energy supply.

7.1. What is Energy Conservation?

In order to protect resources for future use and to lessen environmental degradation, energy conservation refers to actions performed to limit energy use.

.2. What is Energy Efficiency?

The definition of energy efficiency is the use of less energy to carry out a task or achieve a goal. Homes, buildings, and manufacturing facilities that use less energy to manufacture things require less energy to heat, cool, and operate appliances and electronics.

Definitions of Energy

Energy is a key topic in science and technology, as well as in society in general. In terms of energy, a typical definition found in popular literature as well as textbooks is “energy is the ability to do work” or, much more precisely, “energy is the capacity of a system to do work” [Atkins 1990].

Energy is described as the ability to generate change or carry out work, and that work can be separated into numerous easily identifiable tasks: Energy produces light, heat, motion, sound, growth, power and technology etc.

Abstract

Variously defined endophytes are highly diverse in plants in natural ecosystems, and most of them are symbiotic with of them are Asymptomatic presence of endophytic fungi in internal tissues on healthy host plants are able to play vital roles in physiology and biochemical processes. As a result of this interaction endophyte produces chemical substances having various applications. This chapter provides a brief review of certain grass and non-grass endophytes capable to extend beneficial impacts on host plants to sustain the unfavourable conditions of abiotic stresses. However, biotic stresses are also a matter of great concern, where endophytes can play important roles in combating the unfavourable situation. Endophytic fungi used in bio-control and other agriculture related sectors are also  highlighted in this review. Endophytic fungi producing volatile organic compounds reported from all over the world and their various applications find place in this article which has opened new frontiers of bioprospecting of endophytic fungi.

Abstract

Climate variability/change is one of the very significant concerns discussed in the recent two decades. Its impact on air temperature and precipitation has received massive attention worldwide as they affect both the spatial and temporal patterns of water availability. Hence, it is becoming clearer that analysis of trends in air temperature and rainfall is significant in studying the impacts of climate variability/change for water resources planning and management. Therefore, the aim of the study was to detect theannual, seasonal and monthly trends in air temperature and rainfall in the Râmgangâ river basin. Daily air temperature (Bareilly and Moradabad) and rainfall data (Shahajahanpur, Bareilly, Bareilly BPO and Moradabad)of 40 years (1971 to 2010) were used for the study. Non-parametric Mann-Kendall test and theTheil-Sen’s Slope Estimator was used for determination of estimating the trend and magnitude of the trend. Findings revealed that the basin is experiencing a warming trend because of the rise in themaximum and minimum air temperature. In case of rainfall, Moradabad showna significant high positive trend during the monsoon season. This would alter the river run-off in long run if the existing trend continues to persist like this.

Keywords: Climate change/Variability, Mann-Kendall test, Theil-Sen’s Slope estimator, Water resource planning

Abstract

Abiotic stresses lead to the overproduction of reactive oxygen species (ROS) in plants which are highly reactive and toxic and cause damage to proteins, lipids, carbohydrates and DNA which ultimately results in oxidative stress. The arbuscular mycorrhizal fungi (AMF)-symbiosis can confer a greater degree of tolerance against drought stress in many cash crops. The significance of heat shock proteins (Hsps) and chaperones in abiotic stress responses in plants, and co-operation among their different classes and their interactions with other stress-induced components is well known. Soil salinity is a major abiotic stress adversely affecting plant growth and crop production worldwide. Phyto-mycoremediation utilizing AMF as plant inoculants is regarded as a promising strategy to heavy metal pollution remediation. Plants have stress specific adaptive responses as well as responses which protect the plants from more than one environmental stress. The potential of phytoremediation of contaminated soil can be enhanced by inoculating hyper-accumulator plants with mycorrhizal fungi most appropriate for the contaminated site.

Abstract

Nitrogen is an important nutrient for growth and development of plants. Presence or absence of nitrogen often affects the amino acid composition of proteins, which may in turn change its nutritional quality. Increase in the elevated CO₂ concentration and temperature associated with future climates are expected to affect the nitrogen use efficiency (NUE), growth and grain yield of wheat (Triticum aestivum L.). Atmospheric CO₂ is steadily rising from the current level of approx 384 µLL^-1 and is expected to rises upto 550 µLL^-1 by 2050. It is predicted that the global temperature would increase by 1.5- 4.5^oC. The main future challenge is to feed nine billion people under an altered climate, as this increase in global temperature would affect, negatively or positively the future crop productivity including wheat depending upon the geographical location. The present book chapter summarizes the potential impact of elevated CO₂ and temperature on NUE of Triticum aestivum L.

Abstract

Climatic variability with respect to total annual precipitation, mean maximum and mean minimum temperature as well as phytosociological characteristics of various herbaceous plant species of two distinct landscapes, ie, BudhaPushkar (BP) as sandy and Nasirabad Valley (NV) as rocky gravel, of Central Aravalli region was compared over a long period of time (1957-2012). Analysis of climatic data indicates reduction of total precipitation of 50 years by 1226.2 mm. There has been a ‘shift’ in monsoon season. However, a significant increase (36.8%) in precipitation was noticed during the winter season of last five decades. Data on total mean maximum temperature also showed significant variation. A rise of 2.5⁰C was recorded while compared the periods 1971-1990 and 1991-2011. Study showed a notable increase in the mean maximum and mean minimum temperature in the region. An assessment of changes in plant diversity at two landscapes was carried out over a period of 35 years (1976 and 2012). The phytosociological characteristics were compared for these selected years. It was observed that climatic variability have changed the order of dominants and other species with respect to frequency, density and IVI of herbaceous species at both BP and NV landscapes. Total number of species increase for BP landscape while decreased for NV stands, while numbers of invasive species are increased for both the landscapes over a period of 35 years.

Keywords: Climatic variability, Plant diversity, Central Aravalli region, Landscapes, Phytosociological characteristics

3.1. SOLID WASTE MANAGEMENT

Solid waste management includes the transportation, processing, recycling and disposal of our waste materials. We live in a disposable world in many ways with the modernization and convenience of our world we have cluttered it with our refuse.

Surface-Enhanced Raman Spectroscopy (SERS) may detect and identify chemical and biological species ultrasensitively. Through localized surface plasmon resonance (LSPR) effects, metal nanostructures boost analyte Raman signals. This chapter covers current advances and essential principles in metal nanostructures for SERS chemical detection. It discusses SERS fundamentals and enhancing processes, such as metal nanostructure size, shape, and composition. Top-down and bottom-up processes including lithography, chemical synthesis, and self-assembly are used to create repeatable and controllable metal nanostructures. The complex interactions between light, metal nanostructures, and analyte molecules are best understood by combining theoretical modeling and experimental observations.