eChapters

7.1 Economics and Valuation of ghgs emissions

Since the late 20^th century, it has been largely accepted that cause of high concentration of GHGs in atmosphere is induced by human activities. Greenhouse gas emissions and related climate change has opened up debate on overall economic losses and ways to reduce these loses. Moreover, apart from curbing monetary losses; the global political leaders as well as reputed economists are looking towards making money by saving the emissions. Recently, the researchers have started to emphasize on the actual value added to the ecosystem by curbing emissions, discrete of the economic benefits. This section will discuss the economics and ecosystem services related to the management of GHG emissions.

Origin

The initiative to curb the emissions started in 1992 with the United Nations Framework Convention on Climate Change (UNFCCC) at the Earth Summit in Rio de Janeiro. The Convention took place from 3 to 14 June, 1992. The UNFCCC is an international environmental treaty designed to “stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system”. The UNFCCC had non-binding limits on greenhouse gas emissions for individual countries and the framework was only meant for formulating precise international treaties (called “Protocols” or “Agreements”). It contained no execution mechanisms, however, it considered some negotiations and suggestions to formulate the action plans and regulation guidelines under UNFCCC to fulfill the objective of reduction of GHG emissions to the desired level.

Key Facts
    
•    The United Nations Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as a ‘Change of climate which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods’.
    
•    The main green house gases (GHG) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (NO₂).
    
•    CO₂ is the principal anthropogenic greenhouse gas that affects the Earths radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310 respectively.
    
•    CO₂ is responsible for most of the enhanced green house effect of more than 50%, CH4 about 10 to 15% and NO2 about 4%.
    
•    The global atmospheric concentrations of carbon-dioxide, methane and nitrous oxide have increased since 1750, CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and NO₂ increased from 270 ppb to 319 ppb in 2005.

Key facts

    
•    Agriculture is the major land use across the globe. Agriculture production (plant growth) is highly dependent on climate since crop growth is influenced by solar radiation, temperature and precipitation. Agriculture is also sensitive to climate variability and weather extremes (droughts, floods, severe storms).
    
•    The yields of C₃ crops (rice, wheat, and soybean) is expected to increase (10-20%) with predicted doubling of CO₂ concentrations compared to C₄ crops (maize, sorghum, millet, sugarcane) since C₃ plants respond readily/positively to increased CO₂ levels. Therefore, CO₂ enrichment may benefit temperate and humid tropical agriculture compared to semi-arid tropics.
    
•    The predicted rise of temperature could impact crop and horticulture yield if it exceeds optimal temperature range. For example, low latitudes crops are being grown near the limits of temperature tolerance and global warming may put them to higher stress.
    
•    On a world wide basis, global warming would benefit the mid to high latitude zones for agriculture (for a small change of temperature of 1-3^ºC), whereas low latitudes, semi-arid and tropical areas will have much reduced crop and livestock yields. However, adaptation measures may reduce such impacts.

As global climate change becomes an increasingly urgent concern, the search for sustainable and renewable energy sources has intensified. Among the alternatives to fossil fuels, biofuels have emerged as a promising solution due to their potential to reduce greenhouse gas emissions and dependence on petroleum. Biofuels are derived from organic matter, such as crops, agricultural residues and other biomass, which can be converted into energy sources like ethanol, biodiesel, and biogas. For instance, crops like corn and soybeans contain oil extracts that can be processed into biofuels, offering a renewable and environmentally friendly alternative to traditional fossil fuels (Demirbas, 2009). However, the potential of biofuels extends beyond these conventional sources, as researchers explore a wide range of organic materials that can be sustainably regrown and harvested, minimizing ecological impacts (Naik et al., 2010). Biofuels have gained significant importance in both developed and developing economies, driven by their potential to enhance energy security and reduce carbon footprints. In 2023, the United States led global biofuel production with 15,550 million gallons, followed by Brazil with 8,260 million gallons. India ranked third, producing 1,430 million gallons of bioethanol and achieving an E11.7 blend rate during the 2022–2023 period. This blend was sourced from various feedstocks, including sugarcane juice (5%), cane molasses (5%), and damaged food grains (DFG) (1.7%). Historically, India’s ethanol production has relied heavily on sugarcane molasses, but the National Biofuel Policy (NBP) of 2018 has been instrumental in promoting the use of biofuels to reduce fossil fuel dependence, mitigate greenhouse gas emissions, and strengthen energy security (Ministry of Petroleum and Natural Gas, 2018). India, the third-largest energy-consuming nation globally, faces considerable challenges due to its heavy dependence on imported oil, posing risks to both economic stability and strategic security. With its share of global energy consumption projected to double by 2050, the country is actively seeking domestic alternatives to curb this reliance. Ethanol, produced within India, has emerged as a viable substitute. Since its initial pilot in 2001, ethanol-blended petrol has demonstrated notable environmental advantages, with every 10 million liters reducing CO2 emissions by 8,000–17,000 tonnes compared to conventional

Introduction 
Maize (Zea mays L.) which belongs to the Poaceae family, has its roots in the American continent where it was once grown by ancient cultures like the Indians, Magyars, and Aztecs. Today, maize is one of the most widely cultivated crops globally, with the largest productions in countries such as the US, China, India, and Brazil. As a monocotyledonous and cross-pollinated annual plant, maize is an angiosperm with seeds enclosed in a fruit or shell. The root system of maize is fibrous, reaching up to 60 cm. in soil depth. Maize is a warm-season crop with specific agro climatic requirements for successful cultivation. It thrives in warm temperatures and requires a minimum temperature of around 10°C (50°F) for germination. The ideal temperature range for its growth is between 20°C and 30°C (68°F to 86°F). However, maize is sensitive to frost, and exposure to freezing temperatures can damage or kill the crop. Adequate and well-distributed rainfall is crucial during its growing season, as maize needs about 500 to 1000 mm. (20 to 40 inches) of rainfall to support its development, with higher water requirements during flowering and grain-filling stages. While the crop is moderately droughttolerant, moisture stress at critical growth stages can significantly impact yield. Maize is a sun-loving crop and requires long daylight hours with ample sunshine for efficient photosynthesis and plant growth. The soil should be well-drained, loamy or sandy, rich in organic matter, and have a pH ranging from 5.8 to 7.0 (Greaves et al., 1996). Avoiding waterlogged or compacted soils is crucial, as they can impede root development and nutrient uptake. Maize can be cultivated at varying altitudes, but its suitability is generally limited to elevations below 2,500 meters (8,200 feet) above sea level. The crop typically requires 90 to 120 days from planting to maturity, although some varieties with shorter growing seasons are available for regions with limited frost-free periods. High salinity can result in decreased plant leaves, green weight, fresh weight, shorter shoots, and root length but salt-tolerant varieties have been developed.

Introduction 
Sorghum bicolor L. Moench, commonly known as sorghum, has emerged as a significant and promising candidate for both sugar and lignocellulosic biofuel production. Cultivated sorghum varieties exhibit a wide range of phenotypic and morphological characteristics, and based on their intended use, they have been categorized into four distinct groups: grain, forage, energy, and sweet sorghum. Grain sorghum varieties typically stand between three to six feet in height, featuring large ear heads. Their primary role is to serve as a source of food for humans or livestock feed. These varieties play a crucial role in providing sustenance and nutrition to both people and animals. Sweet sorghum, also known as sweet stalk sorghum, represents a unique group of genotypes that accumulate soluble sugars within their stalks. These varieties can grow impressively tall, reaching up to twenty feet, and produce significantly higher biomass yields compared to grain sorghum (Murray et al., 2009). Sweet sorghum’s stems are characterized by their thickness and fleshiness, although they do tend to have relatively lower seed yields. Despite this, sweet sorghum offers substantial advantages in terms of bioethanol production due to the high sucrose content present in its stalks (Srinivasa Rao et al. 2009). It has garnered recognition as an ideal candidate for bioenergy crop cultivation in tropical and temperate regions around the world, particularly in the southern United States. When compared to other bioenergy crops such as corn, wheat, sugarcane, sugar beet, cassava, and sweet potatoes, sweet sorghum presents several noteworthy benefits (Disasa et al., 2016). It is notably drought-tolerant and requires significantly less water than many other crops, such as one-third of the water needed for sugarcane and half of that required for corn. Furthermore, it exhibits tolerance to salinity, enabling its cultivation in marginal regions that are not traditionally suitable for crop production. Additionally, sweet sorghum boasts lower greenhouse gas emissions on a life-cycle basis, contributing to a more sustainable and environmentally friendly biofuel production process. The applications of sweet sorghum are diverse, with its stalks being used for various purposes. In Brazil and India, the stalk is chewed fresh or processed for the production of food-grade syrup and alcohol. Its high sucrose content makes it an excellent candidate for bioethanol production, with the potential to yield up to 8,000 liters per hectare, surpassing the ethanol yield of corn by approximately twofold and outperforming

Overview
Humanity has produced trash since the beginning of time, whether it is from the bones and other parts of the animals they kill for food or the wood they harvest to build their carts. As civilization developed, garbage was produced that was increasingly sophisticated in character. The world of consumers emerged around the close of the 19thcentury as a result of the industrial revolution. The production of non-biodegradable solid waste led to an increase in pollution not just in the air but also on Earth itself. The rise in solid waste was also primarily caused by urbanization and population growth.
Definition of Solid Waste
Glass crockery containers, plastic containers, sludge, vehicle parts, and mounds of crop wastes are among the solid waste materials. These gather in public areas and hinder people’s regular activities.
Every family produces waste or rubbish on a daily basis. We usually toss away items that we no longer need or have any use for, which puts them in the garbage category. Depending on where it comes from, solid waste can take several forms. Understanding the proper ways to handle the trash produced has become crucial in today’s dirty world. One crucial technique for managing municipal solid waste is segregation. Representation provides a good understanding of segregation at source. Composting is a crucial waste management and treatment technique.

Green composites provide opportunities to reduce dependence on petroleum-derived materials while maintaining useful mechanical and functional performance. This chapter examines the fundamentals of green composites and the major challenges limiting their wider adoption. Important issues include poor interfacial bonding, nanoparticle dispersion, variability of natural fibres, mechanical and thermal limitations, processing difficulties, cost, scalability, and commercialization barriers. Nanoparticle reinforcement is explored as a means of improving tensile strength, stiffness, thermal stability, electrical conductivity, and barrier properties. The chapter also discusses green processing, advanced characterization, emerging applications, sustainability assessment, life-cycle assessment, and future research directions for developing high-performance and commercially viable green composite systems.

Solar energy is the energy emitted by the sun in the form of electromagnetic radiation. It is the most abundant, renewable, and sustainable energy resource available on Earth. Every hour, the Earth receives more energy from the sun than the entire human population consumes in a year. This makes solar energy a key candidate for solving the world’s growing energy needs while addressing environmental concerns. The solar energy reaching Earth can be harnessed and converted into useful forms of energy
Solar Photovoltaic Fencing
Solar photovoltaic fencing utilizes solar energy to provide an effective security solution, using high-voltage electric pulses to deter intruders or animals. The system operates by converting solar energy into electricity, which is then stored in a battery for later use. The battery powers an energizer that sends high-voltage pulses along the fence, creating an electric shock when an intruder touches the live wire.
System Components and Working
1. Solar Module: Converts sunlight into direct current (DC) electricity, which charges the battery.
2. Battery: Stores the energy generated by the solar panel. The 12V/100AH battery allows the system to operate even at night or during cloudy days.
3. Energizer: The energizer is the heart of the system, generating high-voltage pulses. It works by sending electrical pulses at regular intervals (usually one pulse per second) through the fence. The energizer is powered by the battery.

4.1. Substrate quality
    Litter quality
    Soil organic matter (SOM) quality

4.2. Decomposer community
    Soil animals
    Soil microorganisms
    Terrestrial fungi
    Actinomycetes    
    Bacteria

8.1 Introduction

Rising petroleum prices, increasing threat to the environment from exhaust emissions and global warming have generated an intense international interest in developing alternative non-petroleum fuels for engines. The use of vegetable oil in internal combustion engines is not a recent innovation. Rudolf Diesel (18581913), creator of the diesel cycle engines, used peanut vegetable oil to demonstrate its invention in Paris in 1900. In 1912, Diesel said, “The use of vegetable oils as engine fuel may seem negligible today. Nevertheless, such oils may become, in the passing years, as important as oil and coal tar presently.” Nowadays, it is known that oil is a finite resource and that its price tends to increase exponentially, as its reserves have being decreasing¹.

India ranks sixth in the world in total energy consumption and needs to accelerate the development of the sector to meet its growth aspirations. The country, though rich in coal and abundantly endowed with renewable energy in the form of solar, wind, hydro and bio-energy has very small hydrocarbon reserves (0.4 % of the world’s reserve). India, like many other developing countries, is a net importer of energy, more than 25 percent of primary energy needs being met through imports mainly in the form of crude oil and natural gas. The rising oil import bill has been the focus of serious concerns due to the pressure it has placed on scarce foreign exchange resources and is also largely responsible for energy supply shortages. The sub-optimal consumption of commercial energy adversely affects the productive sectors, which in turn hampers economic growth².

1. Introduction
Metals pollution in water particularly in wastewater has become a center ofconcern due to social changes such as industrialization and urban development(Blaszczak-Boxe et al., 2023). It is in this context that most of the conventionalwastewater treatment fails to remove the heavy metals in question satisfactorilyand that there is a pressing need for new ideas that would be sustainable. Thischapter aims to discuss algal bioremediation as an environmentally suitableprocess for the decontamination of wastewater containing toxic metals.

Introduction

Global warming needs a shift to automobile solutions that reduces/ do not produce greenhouse gas emissions. Automobile related pollution is the major source for reduction in air quality in Indian cities. India need to reduce dependency on a fossil- fuel and reduced transportation related emissions. People living in some of the Indian cities are being affected by noise pollution and electric vehicles may contribute to a reduction in noise pollution levels in the cities. Energy efficiency and emissions are two important contributing factors in transportation across the globe.

Introduction

The issue of environmental protection has become increasingly important in recent years, and one of the most effective ways to address this problem is through the use of recycled products. Recycling helps to conserve natural resources, reduce waste, prevent pollution, and combat climate change making it a critical part of any sustainable development strategy. In this chapter, we can explore how recycled products can help protect the environment and the many benefits that come with their use.

1. Introduction
Plastic pollution is a global problem that requires immediate attention due toits negative impacts on ecosystems, infrastructure, (MacLeod, M., Arp et al.2021) society, and the economy (Honingh, D. et al.,2020).In terms of absolute emissions, we find that South-eastern part of Asia, andSub-Saharan part of Africa possess the greatest quantities of plastic pollution,with India emitting the most (9.3 Mt year−1), or about one-fifth of the world'stotal plastic pollution (Joshua W. Cottom et al.).
Future regulations pertaining to the manufacturer, usage, and getting ridof plastics will be influenced by the discussions for a worldwide plasticpollution treaty. A baseline with great resolution of waste flows and sourcesof plastic emissions will be useful for the stakeholders in order to identify
pollution hotspots and the reasons behind them (United Nations EnvironmentProgramme). Furthermore, in addition to the production of municipal waste,the pandemic of coronavirus illness has raised the usage of disposable polymerproducts, masks, tissues, gloves, and additional personal protection equipment,which made the plastic pollution disaster worse (De-la-Torre GE et al., 2021).Wasted plastics can break down and fragment into three different sizes: 1mm to 5 mm big microplastics, 1 μm to 1 mm microplastics, and 1 nm to1 μm nano plastics, (Waller et al., 2017; De-la-Torre 2020; Atugoda et al.,
2022) being exposed to ultraviolet (UV) light and other processes that causeenvironmental damage

Introduction 
Renewable and more eco-friendly sources of fuel must be a major concern of our nation for the betterment of our environment because a growing population requires more energy. Fossil fuels have played a significant role in driving the advancement of society, economy, and development. Fossil fuels are the most used sources for the fulfilment of energy requirements. The predominant source of energy on a global scale is fossil fuels, which account for 88% of total energy production (Li et al., 2019). These sources are finite and depleting sources and have a significant negative impact on the environment through the emission of greenhouse gases, sulfur dioxide, nitrogen oxide, and particulate matter (Ritchie et al., 2023). These gases cause global warming by trapping heat, which causes climate change and its side effects, such as increased temperatures globally, more frequent and intense heat waves, and altered weather patterns (Solarin, 2020). In 2017, there was a 1.6% increase in CO2 emissions related to the combustion of fossil fuels, and this trend is anticipated to continue (Khoo et al., 2020). Fossil fuels, on the other hand, are non-renewable sources of energy that will deplete rapidly within fifty years (Chew et al., 2018). In an age marked by increasing environmental concerns and a growing urgency to combat climate change, the pursuit of sustainable and eco-friendly energy sources has never been more critical. Among the renewable energy options, biofuels have emerged as a prominent contender, holding the promise of reduced carbon emissions and a path toward a greener, more sustainable future (Takeuchi et al., 2002). Biofuels, derived from organic materials like trees algae, and waste, have attracted a lot of attention because they have the potential to lessen our reliance on fossil fuels and reduce the negative effects of climate change. Figure 5.1 shows the classification of biological feedstocks utilized in biofuels comprising four distinct generations: first, second, third, and fourth (Alalwan et al., 2019). Edible biomasses like sugar beet, corn, wheat, rice corn, etc come under the category of first generation. Since these feedstocks are in competition with food harvests for a specific quantity of land, fertilisers, and water, the viability of first-generation biofuels is subject to discussion (Paschalidou et al., 2016). Subsequently, the resources and energy utilised in the cultivation of feedstocks are inefficiently utilised, resulting in costly production. Furthermore, there exists a discourse surrounding the potential contribution of biofuel to the mitigation of greenhouse gas emissions (GHGs). This is because certain biofuel varieties may generate negative net energy gains, thereby increasing greenhouse gas emissions throughout the production process. However, the most contentious topic continues to be the "food versus fuel" dilemma.

ABSTRACT
The rapid industrialisation and speedy progress towards urbanisation across the world have created the huge demand for energy moreover creating enormous quantity of wastes. The latter is in charge for polluting the environment in an exponential manner, resulting out of the harmful and poisonous compounds released by them. In recent years, there has been a pattern change from ‘waste-to-wealth’, considering the value of high organic fraction accessible in the wastes. The best-accomplished methods are that of anaerobic digestion; contribute to the production of methane (CH₄). Similar biotransformation has partial net energy harvests. Recently, fermentation industries steering their interest towards the production of value added products, viz., biohydrogen (H₂), biopolymers, ethanol, vitamins, acetic acid, enzymes, butanediols, etc. from carbon rich organic waste like cellulosic substrates have been envisioned to flourish in a multi-step process, such as the ‘Biorefinery’. A contemporary development in fermentation technology holds the key to overcome the constraints for such processes that may lead to a sustainable economy. One related technology is electrofermentation that has attracted significant attention recently owing to its capacity to boost the metabolic activities of microbes by means of extracellular electron transfer.

Introduction

Energy conservation is the practice of using less energy to lower costs and reduce environmental impact.

A majority percentage of energy used in buildings is still from non - renewable and fossil fuel resources. Lighting and Appliances are affecting energy demand in domestic sector.

Reasons for increased energy demand

• Increase in electrical appliance ownership

• Increasing income level and reliable access

• Rise of Lighting and appliance loads

Introduction

Eco-friendly interior design is an important consideration for anyone who wants to create a healthy, sustainable, and beautiful space.

Environmental impact: The materials used in interior design can have a significant impact on the environment. Eco-friendly materials are made from renewable resources, reduce waste, and often have a lower carbon footprint than traditional materials.

Introduction

In the recent years, climate change emerged as the single most pressing problem globally, and accordingly received an increased attention (Berrang-Ford et al., 2011). It is evident that human activities are responsible for the climate change. Natural processes may also lead to climate variability and change. The climate change forecasts resulted from simulation models indicate that the future climate is likely to turn into more capricious nature with more occurrences of extreme events (IPCC, 2013b). Future projections according to the World Bank (2010) reveal the need of raising food production by 1.8% per annum between 2005 and 2050 due to climate change rather than 1% per annum if there were no impact of climate change. The effect of climate change can be seen on the quantity and quality of various components in the global hydrologic cycle (Milly et al., 2005; Bates et al., 2008).

In South Asia, vulnerabilities to the climate change are the largest in semi-arid and arid countries, where rainfall is concentrated over a few monsoon months, year to year variations are high, and where water resources are decreasing (Lenton, 2004). Cruz et al. (2007) indicated that climate trends and variability can be characterized by increased air temperatures, which are more pronounced during the winters compared to the summers. Across the entire Asia, both spatial and temporal variability in rainfall trends observed during the past few decades may be attributed to climate change. It is likely to happen that climate change will extend the dry season when negligible or very low flows occur, which particularly affects the water management process due to inability to rely on water storage reservoirs or groundwater resources situated at great depths (Giertz et al., 2006).