eChapters

Introduction

As the most of the conventional resources are depleting and can last only for about a few 30 to 50 years. Scientists worldwide are looking for alternative energy resources and they have come to an agreement that solar energy can provide much of our energy needs in the future. The major challenge before them is to store this energy. The radiation falling on the earth surface can be tapped and stored in no of ways. However, the most efficient way is done through the latent heat storage through PCM. The PCM has many added advantages i.e. high energy density, isothermal behavior, non-polluting and low cost. Nowadays, it gaining popularity worldwide and now seen as the most efficient way of thermal energy storage. There is a large number of PCM at use i.e. organic, inorganic, eutectic and salt hydrates. Their utilization depends on the user’s requirement technological constraints. They also serve the purpose of energy availability at night beside the uninterrupted supply during the day. They are seen as the materials for ensuring the environmental sustainability

Introduction
Sugarcane (Saccharum officinarum Linn.) is a remarkable tall, perennial grass characterized by its thick, jointed stalks and long linear leaves. This remarkable plant, known for its ability to efficiently photosynthesize in warm climates, is a C4 plant. The propagation of sugarcane primarily occurs through stem cuttings, as it seldom produces flowers and seeds. It finds roots in regions with tropical and subtropical climates featuring warm temperatures, abundant sunshine, and well-drained fertile soil (Shukla et al., 2017). Cultivated for its sweet juice, rich in sucrose, sugarcane serves as the primary raw material for the production of sugar, ethanol, and various other valuable products. Its lifecycle comprises several growth stages, including germination, tillering, grand growth, and maturation, culminating in the harvesting of its valuable juice. Continuous advancements in botany and genetics have contributed to the improvement of sugarcane cultivation, enhancing yield and resistance to pests and diseases. The origins and domestication of sugarcane can be traced back to Southeast Asia, particularly in regions encompassing Papua New Guinea, Indonesia, and their vicinity. The domestication of sugarcane is believed to have commenced thousands of years ago when early human populations in these regions recognized the sweetness of the cane and began cultivating it for its edible properties. Over time, through selective breeding and propagation of plants with desirable traits, these early cultivators played a pivotal role in shaping the sugarcane we know today. This indigenous Southeast Asian plant spread to other parts of the world through trade and exploration. Historical records indicate that sugarcane found its way to India around 500 BC and reached China in the 6th century AD. Subsequently, it traversed the Middle East, the Mediterranean region, and eventually reached the Americas during the early voyages of exploration and colonization (Grivet et al., 2004). Christopher Columbus played a significant role in introducing sugarcane to the Caribbean islands during his second voyage in 1493, and from there, it made its way to other parts of the New World, including Brazil and various South American countries. The cultivation of sugarcane emerged as an essential industry in these regions, profoundly influencing their economic and social landscapes. The domestication and widespread cultivation of sugarcane have left an indelible mark on the global economy, trade, and human history. Today, sugarcane remains one of the most significant crops globally, with major producing countries, including Brazil, India, China, Thailand, and others. It stands not only as a pivotal

Introduction

The natural hazards like floods, cyclones, droughts, landslides and earthquakes are not rare or unusual phenomenon. India is among the world’s most disaster prone areas and a large part of the country is exposed to such natural hazards, which often turn into disasters causing significant disruption of socio-economic life of communities leading to loss of life and property. It would not be considered as a disaster unless it resulted in actual damage to human life or property. According to data accumulated over past 25 years, natural disasters in Asia accounts for about 40% of the world’s total disasters while the death toll ratio is about 50% and the number of people affected is about 90%. The latter figure is about 2.2 times the ratio of number of occurrences in Asia. The figures vary widely over the decades, a result that can be attributed to a few particularly terrible disasters. Such as the 1976 Tangshan Earthquake in China, which killed about 250,000, and a series of severe cyclones that hit Bangladesh in 1970 with a death toll of about 500,000. The death toll resulting from wind and flood disasters jumped by an order of magnitude in the 1990s. But this sudden increase affected Asia’s ratio to the world total by about 15 percentage points because there was a worldwide surge in this type of disaster. Clearly, there is an extreme concentration of victims of such disasters in Asia, Another substantial increase is clear in the value of damage caused by typhoons and cyclones; it is now running at 10 times the level of the 1980s. Again, however, the ratio has remained almost unchanged, at about 40%, because hurricanes in Central and North America account for more than 50% of the world total (51.2%, 58.5%, and 54.4% in the 1970s, 1980s, and 1990s,respectively). It is sadly worth noting that there has been conspicuous growth in the absolute value of damage in both Asia and the Americas.

Introduction

The Rispana river is a order of stream forming a tributary of Ganga. Its watershed covers an area of approximately 53.6 Km in the northern part of Dehradun city lies between 78^º30’ to 78^º15⁰’ longitude and 30^º15’ to 30^º 30’ latitude in top sheet No is 1/3. The area is covered in IRS - IC Pan of 13 Jan 1998 and LISS-III of 7 March 1997.

The Doon Valley is enriched with numerous seasonal and perennial streams. Which forms the lifetime or the inhabitants . The Rispana river is the part of the Ganga system of Drainage of the valley. The river originates from the Mussoorie hills, which are full of natural springs. The droplets from the springs collect and form numerous streamlets and these streamlets are joined to be these and they form the famous Shekhar Falls (north of Shahanshai Ashram about 5 Km away). Then the Rispana flows along Rajpur road over the Doon Gravels and then river passes through the tiny hamlets Nalapani, Raipur, Chanderroad, Defence colony, Amwala, Tapowan, Dandadhoran Adohiwala, Dalanwala, Gujram, Ajabpur and finally its contribute the water to the suswa River which intern joins the Ganga.

14.1 Introduction

Indoor air pollution causes significant health problems for the two billion people worldwide who rely on biomass fuels for their cooking and heating needs. Over the last 30 years awareness of the environmental and social costs of using traditional fuels and stoves has grown. At the same time, studies of the problem have resulted in proven strategies to reduce both fuel use and harmful emissions. Unfortunately, the local stoves currently available do not always represent the best designs that modern engineering can offer. Although open fires are often used wastefully, carefully operated open fires can be fuel efficient and clean burning when tested in the lab. In many situations, cooks are not overly concerned with fuel use, and studies have shown that when fuel is plentiful three-stone fires can use an excessive amount of wood to cook a small amount of food. But in other places where fuel is scarce, open fires can be carefully controlled so that fuel efficiency rivals many first generation improved cook stoves.

Modern cook stoves are designed to clean up combustion first. Then the hot gases can be forced to contact the pot and increasing efficiency without increasing harmful emissions. Fires can be clean burning when expert cooks push the sticks of wood into the fire as they burn, metering the fuel. The open fire can be a hot fire useful when food or drink needs to be prepared quickly. The energy goes into the pot, not into the cold body of a stove. The open fire can burn wood without making a lot of smoke; hot fires burn smoke as it is released from the wood (Fig.14.1). Unfortunately however, many fires used for cooking are built emphasizing simplicity of use and are wasteful and polluting. Modern stoves score higher when tested than even the most carefully operated fire in the laboratory.

Conservation has always been one of the most important applications of ecology.Unfortunately, the term “conservation” suggest “hoarding”, as if the idea were simply to ration static supplies so that there would be some left for the future. In the eye of the general public the “conservationist” is too often presumed to be an antisocial person who is against any kind of “development”. What the real conservationist is  against  is unplanned  development  that breaks  ecological  as  well as human laws. The true aim of conservation, is two fold–
    
(1)     To ensure the  preservation of a  quality  environment that considers esthetic and recreational as well as product needs; and  
    
(2)     To ensure as continuous yield of useful plants, animals and materials by establishing a balanced cycle of harvest and renewal.

2.1 Introduction

Biomass store solar energy in the chemical form and it is most precious and versatile resources on earth. Biomass, unlike fossil fuels, is a renewable energy resource that is available where the climatic conditions are favorable for plant growth and production¹. The term biomass is used for all organic materials which are combustible in nature, mainly plant and animal origin present in land and aquatic environments. Biomass is considered carbon neutral, because the amount of carbon it can release is equivalent to the amount it absorbed during its life time. There is no net increase of carbon to the environment in the long term when combusting the lignocellulosic materials. Therefore, we can say that biomass is a renewable source of energy and can play vital role in responding to concerns over the protection of the environment and the security of energy supply^2,3.

Biomass energy accounts for about 15% of the world’s primary energy consumption and about 38% of the primary energy consumption in developing countries⁴. Furthermore, biomass often accounts for more than 90% of the total rural energy supplies in developing countries⁵. It is the main source to meet out domestic energy in developing countries⁶. The efficient use of fuel wood is much more eco-friendly than the use of efficient and conventional fuels like kerosene and liquefy petroleum gas (LPG). LPG emits 15 times more CO₂ per kg than wood, and kerosene emits nearly 10 times as much. CO₂ is the prominent candidate for global. It is commonly assumed that biomass fuel cycles based on renewable in nature and greenhouse-gas (GHG) neutral because the combusted carbon in the form of CO₂ is soon taken up by re-growing vegetation⁷.

1.1. Background Introduction

We live in a world with “throw-away” societies that are involved in a pattern of consuming packaged products that don’t even last past a single use or even a year and discarding the waste. This lifestyle generating waste is negatively impacting public health, environment and imposing socio-economic problems on us. The waste is continuously consuming our land, resources, and energy for storage, management, treatment, and disposal. Solid waste was an urban issue initially but has reached every corner nowadays. 

1. Introduction
One of the foremost environmental challenges the world faces today is airpollution. As industrialisation, urbanisation, and transportation continueunabated, harmful substance levels in the atmosphere have becomealarmingly high (Thanvisitthpon et al., 2024). This general contamination inthe air is not just a serious risk to humanity but also harms ecosystems whilcontributing to global climate change. Controlling airpollution has becomea critical necessity at this stage, with the need for innovative solutions inthis respect. Bioremediation is one of the innovative solutions, where certainmicroorganisms break down or neutralise pollutants in the air.

1. Introduction
1.1. The Growing Problem of Pesticide Pollution
Pesticides are used in very great amounts in agricultural production for theprotection of crops against pests, diseases and weeds. They are also veryinstrumental in boosting agricultural productivity by ensuring food securityand preventing losses that may be caused by outbreaks of pests (Popp et al.,2013). However, the extensive use of pesticides has generally resulted in hugeenvironmental concerns. Improperlymanaged pesticide residues may remainin soil, water and even air for many years and create severe ecological andhealth hazards in the long run (Zhang et al., 2024). This widespread existenceof pesticides in the environment has raised a serious alarm concerning theiradverse impacts on biodiversity, soil fertility and quality of water, furtherbioaccumulation in the food chain that affects wildlife and human populations(Aktar et al., 2009).

3.1 Introduction 
The continuous rise in CO2 levels is poised to culminate in a profound global warming impact. Projections suggest that by 2030, CO2 levels could nearly triple, driven by the burgeoning population of motor vehicles. This pressing issue underscores the urgency for the current generation to scrutinize its fuel choices and explore alternative options. Biomass emerges as a pivotal contender, offering a trinity of fuel phases. Escalating petroleum prices and growing apprehensions about the role of fossil fuels in contributing to global warming have spurred a quest for biofuels, recognized for their environmentally friendly attributes. The worldwide energy consumption has increased by an astounding 4 to 5% due to the combination of industrialization and the growing human population. Energy insecurity presents a number of puzzles, including rapidly decreasing fossil fuel reserves due to rapid industrialization, skyrocketing gasoline prices, growing dependence on Middle Eastern oil supplies, and the deleterious effect of fossil fuels on greenhouse gas emissions. (Fig 3.1). Figure 1. Air pollution due to fossil fuel smoke from industries & transportation The UN's June 1992 Earth Summit in Rio de Janeiro set the stage for addressing environmental issues such as acid rain and the greenhouse effect caused by greenhouse gas (GHG) emissions. The goal of the Kyoto Protocol, an agreement between Russia, Japan, and Europe, is to reduce CO2 emissions. The ability of first-generation biofuels to lower CO2 emissions has drawn attention. But there is a lot of criticism about how they use land and how it affects the supply of food. A more complex option is provided by secondgeneration biofuels, which are made of leftover animal fat and lignocellulosic biomass. The third generation focuses on algae, namely single-celled organisms (SCO), as a viable substitute in the fuel industry. Within this discourse, "biofuels" refer to chemicals that are enhanced with energy. When burned, biofuels release fewer toxic emissions than fossil fuels, making them renewable resources. Furthermore, no carbon dioxide (CO2) is emitted into the environment by them; instead, any carbon released during combustion is absorbed by plants as they grow.

Introduction 
To fight climate change and lessen dependency on fossil fuels, the world urgently needs renewable and environmentally friendly energy sources. Hydrogen has become a promising energy carrier due to its versatility and capacity to generate energy from renewable resources without releasing greenhouse gases into the atmosphere. The world's demand for energy has been steadily increasing as a result of urbanization, economic expansion, and population rise. With an estimated 10 billion people on the earth by 2050, energy consumption is only expected to increase. Fossil fuels, which include oil, coal and gas have been widely used to generate energy and are predicted to do so at least until 2050 (see Fig.6.1) [1]. Figure 1. Global primary energy consumption is broken down by energy source [2, 3]. These fuels generate a large amount of greenhouse gases (GHGs) during combustion, especially carbon dioxide (CO2), which is connected to climate change and global warming. In addition, burning fossil fuels releases particulate matter (PM), sulfur oxides (SOx), nitrogen oxides (NOx), and other pollutants that are harmful for human health. In addition, the unequal distribution of fossil fuel supply has led to increased instability globally and worries about energy security. Numerous nations started making investments in energy from renewable sources as concerns about the environment and energy security have grown. Because they emit little to no greenhouse emissions, renewable energy resources like hydroelectricity, wind, and solar power contribute to lowering the energy industry's overall environmental impact (see Fig.6.2) [4].

Introduction 
Carbon rich solid residue named as biochar produced by heating biomass in a procedure recognized as pyrolysis. During pyrolysis, biomass, including crop and forestry residues, manure, municipal and industrial wastes, is broken down at temperatures exceeding 400°C, with minute to no oxygen present. This procedure results in the making of syngas, bio oil, and biochar. Given its high carbon content, approximately 60% to 90%, biochar addition in soil has been recommended as an effective, long-term method for capturing atmospheric CO2 within terrestrial ecosystems. In addition to its role in reducing greenhouse gas productions and carbon sequestration, biochar offers various advantages for soil quality enhancement. Incorporating biochar into soils can boost crop yields by improvising the physical, chemical, and biological characteristics of the soil, such as increasing water retention, adjusting soil pH, and enhancing microbial activity (Zoghlami and Paës, 2019). The production of biochar offer several benefits such as carbon sequestration in which produced biochar captures carbon that would otherwise be released into the atmosphere (Rahimi, Anand and Gautam, 2022). This helps mitigate climate change by locking carbon in a steady form for a lengthy period, reducing greenhouse gas emissions. When added to soil, biochar can enhance its physical, chemical, and biological properties. It improves water preservation, nutrient accessibility, and microbial activity, leading to increased soil fertility and crop yields (Saikia et al., 2015)perennial grass species Arundo donax L. was pyrolysed in a fixed-bed reactor and characterization was performed for the liquid and the solid products. The effect of process parameters such as temperature (350-650°C. Biochar production can utilize various types of organic waste materials, including agricultural residues, forestry waste, and certain municipal and industrial wastes. This reduces the burden on landfills and promotes waste recycling. The pyrolysis process used to create biochar can be designed to minimize emissions of harmful gases and particulates, thus contributing to air quality improvement. These byproducts can be used as sources of renewable energy, further reducing the carbon footprint. Biochar can improve soil aeration, reduce soil erosion, and help prevent nutrient leaching, which contributes to overall soil health and ecosystem stability as described in figure 9.1. It can remain in the soil for thousands of years, providing long-term carbon storage benefits. Biochar

1.1 Policy Background

Human activities have resulted in the alteration of the composition of our atmosphere triggering change in the Earth’s climate. The world’s population has grown at an alarming rate with a corresponding increase in demand for natural resources, energy, food, and goods. As a consequence of increase in consumption, vast quantities of gases and effluents are discharged that change the composition of the atmosphere and its capacity to regulate its temperature. The rise in the global temperature is caused by the accumulation of the so-called “greenhouse gases”, namely, carbon dioxide (CO₂), methane, nitrous oxide, and chlorofluorocarbons. Energy received from the sun is absorbed as short wavelength radiation and is eventually returned to space as long wavelength infrared radiation. Greenhouse gases absorb the infrared radiation, trapping it in the atmosphere in the form of heat energy.

Introduction

We have now started to feel the impacts of climate change, as a threat to our health, directly as heat stress on our bodies, and indirectly as it damages crops, and causes storms, floods and wildfires (IPCC, 2022). People working in fields or factories, or in the open, suffer the most. Buildings are our first defense as we learn to adapt to these changes. Resilient buildings that provide passive cooling can protect us better from heat waves, buildings designed to withstand storms and f loods can provide better shelter, and net-zero buildings that produce and store their own energy can enable critical operations when the electric grid is down.

Introduction

India’s textile sector is one of the oldest industries in the Indian economy, dating back several centuries. The industry is highly varied, with hand-spun and hand woven textiles sectors at one end of the spectrum and the capital-intensive sophisticated mill sector at the other. The fundamental strength of the textile industry in India is its strong production base of a wide range of fiber/yarns, from natural fibers like cotton, jute, silk, and wool, to synthetic/man-made fibers like polyester, viscose, nylon, and acrylic.

1-1. Identify the current state of environmental policies in Indian agriculture and the challenges faced in their effective implementation.

1-2. Evaluate the importance of implementing environmental policies and management systems in Indian agriculture to ensure sustainable development.

1-3. Analyze key international standards, such as ISO 14001 and EMAS, and how they can be applied in the context of Indian agriculture.

1-4. Compare and contrast best practices and case studies of companies and organizations that have successfully implemented environmental policies and management systems in Indian agriculture to draw insights and lessons learnt from them.

Abstract

A majority of the plants studied in natural ecosystems are symbiotic with microorganisms that either reside entirely (endophytes) or partially within plants. These microorganisms express different associations ranging from mutualism to parasitism. These symbiotic relationships appear to impart tolerance to various types of abiotic stresses such as heat, drought, salinity, heavy metals, etc. and sometimes may be responsible for the survival of both plant hosts and microbial symbionts in high stress habitats. The amelioration of the abiotic stresses by the endophytes assumes increasing significance in the light of rapidly changing global climate, which is likely to face frequent incidences of extreme weather conditions like high temperature, droughts, etc.

According to the Indian economic survey of 2018, more than 50% of the Indian workforce is employed in the agricultural sector. Agriculture contributed to 17–18% to the country’s GDP. Agriculture’s share in India’s economy is less compared to the industrial and services sectors. The industrial and service sectors have higher growth rates. The significance of the agricultural sector in India’s economic and social growth goes well beyond. Nearly 60% of India’s families depend on rural incomes. In addition to this, the majority of India’s poor population (around 70 %) lives in rural areas. Also, as the population is growing at a fast rate, food security in India depends on producing cereal crops and in increasing the production of fruits, vegetables and milk to sustain the needs of a growing population. To achieve this we need a productive, diversified, competitive, and sustainable agricultural sector. India is the world’s largest producer of pulses, spices and milk. It has the world’s largest cattle herd and the largest area under wheat, rice, and cotton. India is also the second largest producer of rice, wheat, cotton, sugarcane, farmed fish, sheep & goat meat, fruit, vegetables and tea.

Abstract

Drought and salinity are two major abiotic stresses that affect various aspects of human lives of one third world population including human health and agricultural productivity. Abiotic stresses such as salinity, drought, nutrient deficiency or toxicity, and flooding limit crop productivity world-wide. A living organism is considered resistant if it tolerates a given physicochemical stress. The presence of microorganisms within the soil, specially a main group known as arbuscular mycorrhizal fungi (AMF), is a key factor in the adaptation of plants to the different ecosystems. The AMF colonizing within the plant roots can determine the success of plants in salt- and/or drought-affected areas. The symbiosis with AMF has been proposed as one of the mechanisms of salinity and water stress avoidance. Studies have shown greater drought and salinity tolerance in AMF-colonized plants by a number of mechanisms. These mechanisms include enhanced water and nutrient uptake directly by extraradical hyphae, higher leaf stomatal conductance and/or better root system architecture, higher capacity of osmotic adjustment and antioxidant defense systems, better soil structure due to higher glomalin and over expression of genes encoding antioxidant enzymes.