eChapters

A sound is a form or energy. Therefore, it has to have an impact on life in one way or the other. Most of the organisms of Kingdom Animalia communicate with each other creating a peculiar sound. Creating sound is inevitable for performing various life activities. Every animal species has the characteristic sound it reflects through its behavior. Whatever all the animals communicate through creating specific sounds is all-natural. Nature, as such is a stupendous repository of a diversity of sounds, all being specific characteristics of life.

Human behavior, however, is highly evolved in terms of creating a variety of sounds. Communication, entertainment, and many behavioral activities are expressed through creating distinctive sounds. There is a difference between natural sounds and the ones human beings create or can create. Humans often generate sounds, not just in a natural manner, but also with various technical aids, that often become unpleasant what we call noise. Creating noise, or noise pollution, seems to be an exclusive characteristic of the human species. Of course, there could be some natural sounds that might occasionally cause havoc to life. Examples are the sounds generated at the time of the volcanic eruption, during an earthquake

Introduction
The term “noise” originates from the Latin word “nausia.” There are negative repercussions of noise pollution on our bodies and minds. In general, the amount of noise and the length of exposure determine how much noise pollution there is. These
days, noise is a constant in our lives due to the advancements in industry, technology, and machinery.
Definition
Unwanted sound released into the atmosphere that poses a health risk is referred to as noise pollution.
The term “unwanted or unpleasant sound that causes discomfort” refers to nose pollution.
Another definition of noise pollution is “wrong sound, in wrong place at wrong time.”
Distinction Between Noise Pollution and Sound Pollution:
Sound is defined as the lowest level of 50 dB that is pleasant to listen to. Noise pollution is defined as any sound that is louder than 95 dB and bothersome to listen to.
Sources of Noise Pollution
1. Factories and industries, community and religious activities, and modes of transportation (air, train, and road) are the primary sources of noise pollution.
2. In metropolitan regions, automobiles, factories, industries, railroads, and airplanes are the main man-made sources.

For the hundreds of thousands of years that we lived on earth,there were few rapid changes in the atmosphere. It is only in recent times, particularly since the Industrial Revolution, that our activities on earth began to modify our environment in a significant manner.  Industrial pollution has affected the water we drink, the air we breathe, and in general,the biosphere itself.Now noise has joined the bandwagon of pollutants.

Noise certainly comes within the scope of definition of a pollutant that “..... any undesirable change in the physical, chemical or biological characteristics of our air, land and water that may or will harmfully affect human life or that of any other desirable species or industrial process, living conditions or cultural assets, or that may or will waste or deteriorate our raw material resources.”

7.1. Developing Sector in Scientific and Technological Approach of Waste Management

From the very past, many traditional practices have been put into use for waste management like landfilling, composting, and recycling, which are practiced even today. However, the boundless upsurging waste compels the modern world to modify the traditional methods or to introduce innovative techniques with the grace of technology

11.1 Introduction

More than 70% of Earth’s surface is covered by the ocean, the world’s largest solar energy collector and storage system. By utilizing only a small portion of this energy, we can meet all the energy needs around the world. As long as the sun shines and there are natural ocean currents, Ocean Thermal Energy Conversion (OTEC) energy source is free, abundant, and continually replenished. It is estimated that 3 to 5 terawatts (1 terawatt is 1012 watts) of baseload power generation can be practically harvested without affecting ocean temperatures or the environment of the planet. this is about the twice the global demand for electricity. Oceans are therefore an abundant renewable resource, offering a sustainable method for the production of electricity in the future. 

Introduction
Oil palm (Elaeis guineensis Jacq.), a tropical perennial tree native to West Africa, is the most productive oilseed crop for biodiesel, yielding up to 5 tons of oil per hectare (Mekhilef et al., 2011). Indonesia and Malaysia are the largest global producers, accounting for over 85% of the world’s palm oil (Atabani et al., 2012). Palm oil is extracted from the fruit of the oil palm and is widely used in both food and fuel applications. However, its cultivation has raised environmental concerns, including deforestation, habitat loss, and carbon emissions (Gui et al., 2008). Efforts are being made to promote sustainable palm oil production to mitigate these impacts (Mekhilef et al., 2011). Deforestation, habitat loss, and carbon emissions are only a few of the serious environmental issues brought on by its cultivation (Fargione et al., 2008). Oil palm plantation growth has been connected to a decline in biodiversity, especially in tropical rainforests that are home to endangered species like Sumatran tigers and orangutans (Fitzherbert et al., 2008). According to Carlson et al. (2013), the conversion of peatlands for the production of oil palm contributes to climate change by increasing greenhouse gas emissions.
History of Oil Palm as Biodiesel Feedstock
Oil palm has been used for cooking and lighting for thousands of years in Africa and Southeast Asia (Obahiagbon, 2012). Research into its use as a biodiesel feedstock began in the 1980s, with Malaysia pioneering biodiesel development (Zainal et al.,2017).
• 1982: The Palm Oil Research Institute of Malaysia (PORIM) successfully tested palm oil-based biodiesel in diesel engines (Yusoff, 2006).
• Early 2000s: Commercial production expanded in Indonesia and Malaysia, driven by government policies and renewable fuel demand (Mekhilef, 2011).
• Sustainability challenges have led to the establishment of certification schemes such as the Roundtable on Sustainable Palm Oil (RSPO) (Ruysschaert & Salles, 2014).

11.1 General

The world is currently facing a critical turning point in its pursuit of sustainable energy solutions. With the global population growing and concerns about climate change increasing, it is crucial to move away from finite fossil fuels and towards renewable alternatives. One promising contender in this field is biodiesel, which has the potential to power our future while also reducing environmental impacts. At the heart of biodiesel production lies the complex process of oil-based biomass processing. This involves extracting valuable oils from various sources and using them to create renewable and eco friendly fuel. Oil-based biomass processing is a dynamic intersection where innovation meets necessity, combining chemistry, engineering, sustainability, and environmental consciousness. It is an intricate and multifaceted endeavor requiring careful attention to detail and a collaborative effort to succeed.

Our Soils – Our Waters & COP22

In the last several decades many international forums and institutions have discussed and agreed that food and water security are the most important issues for the future. The damage to the ecology directly affects the food, land, water, health and the livelihood. Agricultural progress serves as the best way to fight poverty, hunger and livelihood problems.

Though in the last few decades, billions of pages about hunger, food and water security have been written, thousands of conferences have been organized, the urgency of action plans and creating holistic models is the most important need. For this, we must require bold reforms and action oriented programs which can reach the smallest farmers and give an optimistic signal rather than a despondent picture. Developmental models that are holistic and close to nature, sustainable and based on inclusiveness considering ‘unto the last’ women and man are the need of the day.

Introduction

The thermal performance of a building refers to the process of modeling the energy transfer between a building and its surroundings. For a conditioned building, it estimates the heating and cooling load and hence, the sizing and selection of HVAC equipment can be correctly made. For a non-conditioned building, it calculates temperature variation inside the building over a specified time and helps one to estimate the duration of uncomfortable periods. These quantifications enable one to determine the effectiveness of the design of a building and help in evolving improved designs for realizing energy efficient buildings with comfortable indoor conditions. The lack of proper quantification is one of the reasons why passive solar architecture is not popular among architects. Clients would like to know how much energy might be saved, or the temperature reduced to justify any additional expense or design change. Architects too need to know the relative performance of buildings to choose a suitable alternative. Thus, knowledge of the methods of estimating the performance of buildings is essential to the design of passive solar buildings.

1    Introduction to Patent Laws    540

2.    An Overview of the Patenting Process    541

    2.1.    Inventor’s disclosure, 542
    2.2.    Patentability search, 542
    2.3.    Patent application preparation, 542
    2.4.    Patent application amendment, 542
    2.5.    Patent application examination, 543
    2.6    Main parts of a patent, 543
    2.7.    Granting of patent, 544
    2.8.    Date and term of patent, 544
    2.9.    Provisional specification, 544
    2.10.    Complete specification, 545
    2.11.      Cost of patenting, 545

Pesticides are used to control plant growth (herbicides), insects (insecticides), worms  (vermicides), bacteria (bacteriocides), fungi (fungicides), and other organisms. Almost without exception, pesticides are used to benefit humans by the control of unwanted species of plants (e.g. weeds in a lawn), disease-causing bacteria (e.g., Pneumococcus, the causative agent of pneumonia), disease-carrying insects (e.g. malarial or yellow fever mosquitoes) or in controlling destruction of agricultural products by disease-causing organisms (e.g., corn-borers, the virus of anthurium blight). Although they are by and large mostly beneficial, pesticides used both properly and improperly are also “resources out of place”, that is pollutants, that are subject to normal ecological processes.

Introduction

Agricultural produce are being sun dried since ages as the first step to preserve the product for future consumption. It is still practised being most inexpensive over mechanical and other advanced drying systems. The most prevailing disadvantage of open sun drying is the quality losses due to insect infestation, enzymatic reactions, microorganism growth, and mycotoxin development. On the other side, sun drying is also a highly labor intensive and time consuming process prone to theft and damage by birds. It also suffers with the lack of process control and treatment uniformity (Bansal and Garg 1987, Bansal, 1987).

To overcome these disadvantages several types of solar dryers have been developed over the years (Ekechukwu and Norton 1999). These dryer may be identified into three group namely active, passive and hybrid. As regards their structural arrangement three generic subclasses were also identified: direct-modes (the solar-energy collection unit is an integral part of the entire drying system), indirect-modes (the solar collector and the drying chamber are separate units) and mixed-modes solar dryers. Natural convection solar dryers have become more suitable for rural sector and remote areas, as they work on single energy option and do not require any other external energy source (Pangavhane et al. 2002).

Introduction

As the most of the conventional resources are depleting and can last only for about a few 30 to 50 years. Scientists worldwide are looking for alternative energy resources and they have come to an agreement that solar energy can provide much of our energy needs in the future. The major challenge before them is to store this energy. The radiation falling on the earth surface can be tapped and stored in no of ways. However, the most efficient way is done through the latent heat storage through PCM. The PCM has many added advantages i.e. high energy density, isothermal behavior, non-polluting and low cost. Nowadays, it gaining popularity worldwide and now seen as the most efficient way of thermal energy storage. There is a large number of PCM at use i.e. organic, inorganic, eutectic and salt hydrates. Their utilization depends on the user’s requirement technological constraints. They also serve the purpose of energy availability at night beside the uninterrupted supply during the day. They are seen as the materials for ensuring the environmental sustainability

1. Introduction
Water is the most essential resource for life, supporting the survival of allliving beings, including humans, and playing a crucial role in food productionand economic progress. Currently, many cities around theworld are facingsignificant water shortages. About 40 % of global food production dependson irrigation, and countless industrial operations rely heavily on water. Theavailability and quality of water, whether surface or groundwater, have amajor impact on environmental health, economic development, and societagrowth. Human activities like urban expansion, population increase, industrialoutput, and climate shifts are causing a decline in water quality. As nationsdevelop, industrial activities increasingly lead to the pollution of watersources, resulting in negative consequences such as widespread disease and
diminished beauty of water bodies. This pollution is a significant threat toboth the planet and its inhabitants. Higher temperatures are interfering with themetabolic processes of aquatic life, while changes in water pH create unstableconditions. Additionally, increased cloudiness in water reduces oxygen levels,affecting deep-water species and contributing to health issues for both animalsand humans. Polluted water also hinders growth and development in allliving organisms Haldar et al., 2015 and Arif et al., 2020. A study conductedby Halder et al. (2015) highlighted severe health challenges faced bylocalcommunities due to pollution in the Turag River, Dhaka, caused by thedischarge of untreated wastewater into the river. It was revealed that elevatedpH levels in the water, resulting from the use ofcaustic chemicals such assoda ash and caustic soda in industrial processes, were associated with skinirritation and sores. Dietary exposure to polluted crops and fish was found
to contribute to stomach ailments, including gastric ulcers. Concerns wereraised about potential groundwater contamination through the infiltration ofindustrial waste. Microbial contamination was identified as a likely cause ofdiarrhoea and dysentery. The use of river water for bathing and laundry wasobserved to facilitate the spread of waterborne diseases. Outbreaks of yellow
fever, cholera, dengue, malaria, and other epidemics were noted as prevalent inthe area. Respiratory problems and foul odours were attributed to air pollutioncaused by industrial discharge. Maternal and child health in riverbank slumsfound to be vulnerable, emphasizing the urgent need for interventions to addressthese public health concerns.Wastewater produced by industries, agriculture,and domestic activities contains high levels of nutrients, heavy metals, andchemicals, which harm the environment by polluting land, air, and water,

Introduction

India is having very rich sources of inland water bodies in the form of river, lakes and reservoirs. The reservoirs are constructed by impounding the river system. The reservoirs are constructed for effective utilisation of water for irrigation, power generation and flood control. Reservoir fishery in India is also important from socio-economic point of view as it has the potential of providing employment to about two million people, Kaushal and Sharma (2001). Total area under the reservoirs in India is 3:1 million ha and it is expected to double by 2020. This includes 19,000 small reservoirs with a total water surface area of 14,85,557 ha and about 180 medium and 56 large reservoirs of 5,27,541 and 11,40, 268 ha area respectively.

The Maharashtra is endowed with an area of 1,79,430 ha under reservoir and the Maharashtra produces 516 tonnes of fish through reservoirs. The state fisheries corporation was operating in 6,272 ha of reservoirs and marketing the catches.

Abstract

Microbes are endowed with a high and exploitable potential of being useful associates with their surrounding environment and host in case of symbiotic relationship. Most of the microbes live alone but many of them require association of other living system for its survival. Hence, the beneficial role of microbes is always correlated with growth promotion and survivability of other associated living system. Now it is established that microbes play an important and key role in plant growth and development, even its survivability in case of symbiotic mycorrhizal association with orchids. They are nothing but potential tool protecting plants from different adverse conditions like diseased state, environmental stress like cold temperature, drought, metal contamination, salt and acidic or alkaline stress.

In this chapter, a comprehensive list of all plants and trees mentioned in epic Ramayana has been furnished with salient details in order to establish their botanical identity and references of Sholka where it had been mentioned. Some of the plants and trees had been mentioned in multiple sholokas but the plant has been taken into account as a single reference to avoid repetition and to get correct count of the trees and plants in whole of the Epic (Amirthalingam, 2013, Arun Kumar, 2019; Balapure et al., 1987; Bast, 2022; Ghimire et.al, 2021; Mao and Dash, 2010; Prasad and Mishra, 1976).

The plant species mentioned in Ramayana were of different types having various usages. Considering their morphological characteristics, usages and other importance, they have been categorized broadly into the following heads.

1. Economically important plants (Timber value, product yielding etc. having commercial importance).

2. Edible (major and minor fruits etc.).

3. Culturally important plants (Plants used for plantation for shade, greening etc.).

4. Non-Edible Plants (Ornamental importance and other usages)

5. Medicinal Plants (having therapeutic uses).

6. Sacred Plants (having religious importance).

7. Others (having multipurpose uses).

Pongamia pinnata or Mellettia pinnata or Pongamia glabra or Derris indica (2n=2x=22) is a tropical ever green fast growing leguminous tree, with glabrous, glossy and deciduous leaves. The tree is native to India and South Asia and also found in Oceania.

HUMAN POPULATION GROWTH

The evolution of man took place about one million years ago in response to changes in the physical environment. We learnt gradually to adapt different modes of life to varying environments and migrated different parts of the world. Human activities have had their impact on the environment, which was depending on the number of people living in  the area and  their level  of economic development. Per capita consumption of food, energy and other resources in developed countries is larger and its impact on the environment is much greater than equal number of persons living in developing countries in Africa or Asia. Therefore, the distribution of population needs to be examined in detail.