eChapters

Introduction 
It is commonly acknowledged that the swift rise in urbanization and population expansion is the primary reason for the increasing consumption of fossil fuels, which ultimately results in the exhaustion of fuels generated from petroleum. Globally, the scarcity of fossil fuels poses a significant challenge. Furthermore, there are significant worries about the negative impacts of the heavy reliance on petroleum-based fuels on the economy, energy and the environment conservation. Consequently, extensive research has been dedicated to identifying alternative sources that can mitigate the dependence on fossil fuels [1]. Biofuels have garnered worldwide attention as a potential substitute for fossil fuel-derived fuels, given their distinctive qualities [2]. Utilizing a variety of plant sources, including sugarcane, corn, soybeans, vegetables, palm oil, and Jatropha (often used in Africa), biofuel production is progressing on almost every continent. Bioethanol is successfully used as a biodiesel in addition to gasoline for otto-cycle engines in nations like the USA and Brazil [3]. Conversely, biodiesel represents a significant category of biofuel capable of partially or fully replacing diesel obtained from fossil fuels. Biodiesel is made via a process called trans-esterification that uses renewable biolipids [4]. Biodiesel can be produced from oil that comes from nonedible agricultural seeds or kernels [5]. Furthermore, edible oils from plants such as sunflower, palm, and soybean are used as feedstocks to produce biodiesel [6]. In the field of biofuel research, nanotechnology and nanomaterials have proven to be useful instruments for improving output quality at a reasonable cost. Algae stands out prominently in discussions about biofuel production due to concerns related to food resources. Types of biofuels and their sources are represented in the (Fig.1). The use of crops and plants yielding food is considered unsuitable for prioritizing biofuel production due to potential disruptions in food supply. Notably, various algal species vary in their production capacity. The utilization of nanoparticles (NPs) is advantageous in biofuel synthesis due to their unique characteristics, including a substantial surface area to volume ratio, adsorption capacity, high crystallinity, and stability. This distinguishes them from competing sources as better possibilities [7]. In the process of creating biofuels, metal oxide nanoparticles and carbon nanotubes are widely used as nano-catalysts because of their extra characteristics that allow for their high potential recovery [8]. The overall procedure for producing biodiesel on a small scale and for experimental purposes using algae are shown in the (Fig.2).

Introduction 
The overuse of fossil fuels is expanding simultaneously with society’s rapid development, which culminates in a decrease in fossil energy and a very serious deterioration of the environment. The purpose is to make the carbon neutral as fast as possible, which will make the invention of alternative energy sources to replace the fossil fuels. To make world a better place to live, fossil energy is highly needed to be conserved and measures should be made to limit the use of fossil energy. After many researches, the alternate to fossil energy has been made in the form of “BIODIESEL”. Biodiesel, which is produced from renewable resources such as vegetable oil is a new clean alternative to fossil fuel. Biodiesel in the new era of scientific field is mainly produced from Microalgae. Production of biodiesel from microalgae ensures reusing carbon resources from nature. This method contributes to achieve in replacing petroleum use and also helps in reducing pollution in the environment. Biodiesel consist primarily of esters which is formed by methanol or by ethanol and long chains of fatty acids which may be saturated or unsaturated such as palmitic acid, stearic acid, oleic acid and linoleic acid. This is the main and ultimate reason why production and use of biodiesel is attracted the attention of researches worldwide. The biodiesel is developed in three generations that is First, Second and Third generation Microalgae are single-celled organisms which are microscopic. They are an essential component of carbon cycle and they can exploit carbon sources in water and soil efficiently and have plenty of advantages over the other biodiesel sources that are conventional oil crops such as wheat, palm, corns, soybeans, maize and rapeseed. In this century, one of the most important environmental issues is global warming, that is caused by released of greenhouse gases. These microalgae have high rates of biomass production and can survive in a variety of circumstances, such as freshwater, saltwater, and wastewater (Muhammad Abdullah et.al 2024) Their ability to be grown on non-arable ground and their lack of resources competition with food crops are two of their most significant and crucial advantages. The process of producing biodiesel from the microalgae involves many stages. The stepwise structure involves lipid extraction, microalgae cell disruption, harvesting, culture and transesterification. Microalgae re a promising source of biodiesel as they have a high lipid content and can grow quickly. But they are complex in composition and they require a specialized harvesting system. Nanoparticles are an ultrafine unit and have dimensions which are stated in nanometers. These nanoparticles can be detected in the natural environment and can also be generated by human activity. Because of their sub-microscopic size, they boast unique material properties and may be used in many different kinds of fields, namely environmental remediation, engineering and medical care. In 2008, International Organization for Standardization (ISO) defined this nanoparticle as a discrete nano-object in which all the Cartesian dimensions are less than 100nm. Nanoparticles are classified into different types according to their shape,

1. Introduction 
The growing demand for fossil fuels around the world and their extensive use, which degrades the environment, have been serious issues. More precisely, it is predicted that global energy consumption will rise by 49% between 2007 and 2035 due to social pressure, population growth, and economic expansion (Cheah et al., 2016; Prasad et al., 2016). In order to replace fossil fuels, alternative energy resources must be developed, according to energy security and environmental sustainability. The most promising bio-fuel among the alternatives to gasoline is bio-ethanol, which can be used as the only fuel in compatible automobile engines or blended with gasoline up to 30% without requiring engine changes (Safarian and Unnthorsson, 2018). Bio-ethanol has a higher-octane number, which enables engines to run at high compression ratios, and a high oxygen content, which improves combustion efficiency (Branco et al., 2019). Grain, sugar beets, corn, and sugarcane could all be used to make bio-ethanol. Together, Brazil and the United States account for over 90% of the world’s bio-ethanol production, with 59% and 27% coming from each country, respectively (Branco et al., 2019).The Policy Energy Act and Energy Independence and Security Act, which aim to consume 136 billion gallons of bio-ethanol by 2022, are the main drivers of the USA’s remarkably high production rate (Menon and Rao, 2012; Tran et al., 2019). Unfortunately, the world’s food security is now in jeopardy due to the manufacture of bio-ethanol from the aforementioned edible energy crops. For the synthesis of bio-ethanol, lignocellulosic biomass-such as agricultural residues, forest woody residues, micro-algae, and even municipal solid waste is consequently a more advantageous source. Cellulose, hemicellulose, and lignin make up the lignocellulosic complex structure. While hemicellulose is in charge of binding and 88 | Biofuels Production Using Sustainable Bioprocessing Technologies lignin guarantees the toughness of the entire stricture, cellulose, a polymer made of glucose, gives plants structural support (Kumar et al., 2016; Prasad et al., 2016). According to Tran et al. (2019), pre-treatment is a crucial step in order to: (i) increase the amorphous area to facilitate hydrolysis; (ii) improve the porosity of the porous matrix to facilitate enzymatic and chemical hydrolysis; and (iii) separate cellulose from lignin and hemicellulose. The majority of the most successful pre-treatment techniques now in use are physio-chemical and chemical techniques, which also produce harmful compounds such furfural (Liyamen and Ricke, 2012). Other techniques are also used, each with advantages and disadvantages. For example, biological pre-treatment is environmentally benign but does not generate large amounts of material. Compared to the thermochemical approach, the biochemical conversion process performed better and was more ecologically friendly (Mu et al., 2010; Liyamen and Ricke, 2012; Kumar et al., 2019). It should be mentioned that the pre-treatment cost should also include the expense of detoxifying harmful inhibitors, which are created as a result of the pre-treatment technique (Liyamen and Ricke, 2012). All things considered, a successful pre-treatment ought to be both financially and environmentally responsible. It’s also critical to make sure that other advantageous aspect like maximum energy savings, waste and wastewater recycling, material recovery, and the use of a biorefinery method are taken into account throughout the lignocellulosic bioethanol production process (Kumar et al., 2019). Figure 1. Overview of how ILs typically pre-treat lignocellulosic biomass for the manufacture of biofuel (cheah et al., 2020).

    In recent years, the global demand for renewable and sustainable energy sources has led to increased interest in biogas production from agricultural residues and lignocellulosic biomass. Among these, paddy straw an abundant agricultural by-product—has gained attention as a potential substrate for anaerobic digestion and biofuel generation.
However, the biochemical conversion of paddy straw into biogas is limited by its complex lignocellulosic structure, which makes it resistant to microbial degradation. Therefore, pretreatment of biomass is a critical step to enhance its digestibility and improve the overall efficiency of biogas production.
Objective
The primary objective of pretreatment is to break down the structural and compositional barriers within lignocellulosic biomass that hinder microbial degradation and enzymatic hydrolysis. Specifically, pretreatment aims to:
1. Disrupt lignin structure and reduce cellulose crystallinity.
2. Increase surface area and porosity of the biomass for microbial access.
3. Improve enzymatic hydrolysis efficiency for higher sugar and methane yields.
4. Minimize sugar loss and avoid the formation of inhibitory byproducts.
5. Enhance biogas yield and the rate of biodegradation.
6. Achieve these improvements in a cost-effective and scalable manner

Introduction
The sun is the primary source of energy for all life on Earth. The primary energy source for the majority of ecosystems is limited to this one. Photosynthesis is performed by green plants, certain types of algae, and microorganisms. They utilize solar energy to fuel chemical reactions that combine basic inorganic components to create intricate organic chemicals. Elements undergo a cyclical process as they move through the different compartments of an ecosystem.
Photosynthesis is the process by which solar energy is captured and transformed into food in the form of chemical energy. Food comprises fundamental elements such as carbon, hydrogen, nitrogen, and other necessary elements, along with stored energy. The components present in the food undergo recycling. The flow of energy and nutrients begins with the producers, then moves to the consumers, and ultimately returns to the producers through the activity of decomposers. Energy, in contrast to materials, is not subject to recycling. Food traverses the food web, resulting in energy dissipation. Typically, just a mere 10% of the energy accumulated in a certain trophic
level, such as the producers, is effectively passed on to the subsequent trophic level, such as the herbivores. This is referred to as the energy pyramid. Ultimately, the energy available in the trophic level becomes so depleted that it cannot sustain any higher trophic levels. Consequently, the presence of fourth order consumers in any ecosystem is extremely rare.
The biotic component, often known as the life component of the environment, encompasses a diverse array of plants, animals, and bacteria, which form interconnected communities.

Introduction
Fossil fuels are finite and as population growth drives energy demands, the need for renewable energy solutions has become paramount. Among the many ways of producing biofuels, the use of algae has emerged as a promising source. Algae particularly, microalgae are photosynthetic organisms that can convert CO2 into fuel compounds. This innovative way of using microalgae to produce biofuels can address both sustainability as well as the depletion of fossil fuels.
1.1 Microalgae as energy source
Microalgae can be used over conventional biomass as they have several advantages. One of the biggest advantages is their rapid growth rate. They are easy to grow and multiply very quickly. Other benefits include high oil yield and their adaptability to different growth conditions. They also use CO2 to grow making them carbon neutral. Conventional biomass obtained from sugar bagasse or corn needs a lot of resources for a small yield, such as land, water, and electricity whereas microalgae do not require these high investment costs or land. However, the advantages of microalgae do not stop with biofuel production. Researchers have established the use of microalgae across various industries. Commonly, spirulina has been used as a source of protein surpassing protein content per 100 g compared to other protein-rich sources. Similarly, various other microalgae have been used for extracting vitamins, and essential fatty acids, and some are also used as feed for livestock. In recent years, microalgae have also been used in cosmetics for their antioxidant, collagen-boosting properties that can lead to anti-aging benefits. In the supplement industry, microalgae have been used in research as alternatives to mainstream ingredients. Microalgae also have other environmental benefits as they can be used to treat wastewater due to their ability to degrade pollutants and excess nutrients that concentrate in water bodies. With these benefits at hand, they can also be used as an excellent input for the production of biofuels (Razzak et al, 2022; Ramaraj et al, 2015). The figure below shows the various applications of microalgae such as the production of proteins, carbohydrates, biofuels, materials production, etc.

Climate change is a complex and dynamic phenomenon that has significant impacts on agriculture, especially in terms of uncertainty and variability. Agricultural dynamics refer to the various factors that affect agricultural production, including climate, soil, water availability, pests, and diseases, as well as market forces and government policies. Climate change has significant impacts on agricultural dynamics. Variations in temperature, patterns of rainfall, and occurrences of extreme weather can influence crop yields and livestock production in both beneficial and detrimental ways (UCAR, 2021). The effects of climate change on farming can differ based on the geographical location and the specific agricultural practices employed (Wikipedia Contributors, 2019). For example, in some areas, increased rainfall may lead to increased crop yields, while in other areas, droughts may lead to crop failures and loss of income for farmers. Additionally, rising temperatures can cause reduced crop yields and decreased quality of some crops.

Uncertainty is a term used to describe a situation where there is a lack of information, knowledge, or predictability about a particular outcome or event. In agricultural dynamics, uncertainty can refer to a range of factors that can affect the production, distribution, and consumption of agricultural products. One of the most significant sources of uncertainty in agriculture is the weather. The productivity of crops can be significantly influenced by weather conditions, including rainfall and temperature and farmers need to effectively adjust their agricultural practices to adapt to these changing weather patterns (Guntukulaand Goyari, 2020). For example, droughts or floods can reduce crop yields, while frost or hail can damage crops(Lamaoui et al., 2018).

1. Introduction
The environment and human health are seriously threatened by contaminants,both organic and inorganic, whose prevalence and persistence have beensteadily rising in recent years. In addition to propelling economic and scientificadvancement, the industrial revolutions of the 19th and 20th centuries have alsoled to widespread pollution (Wuana & Okieimen, 2011; Singh et al., 2013).Industrial activity has increased trace metal concentrations in the environment,with sediments acting as key sources and reservoirs for heavy metals. Thesemetals build up in soils and aquatic bodies as a result of scouring, erosion,rainfallleaching, wastewater discharge, and atmospheric deposition (AlonsoCastillo et al., 2013). Additionally, toxic contaminants like phenols, industrialeffluents, domestic wastewater, agricultural runoff, fly ash, fertilizers, andwaste from insecticides, pesticides, and pharmaceutical industries infiltratethe environment and food chain via mechanisms such as bioaccumulation,biomagnification, and bioconcentration (Arora & Bae, 2014; Azubuike et al.,2016).

Tools of Public Awareness

The public awareness and awakening can be created among people through various means and ways. In this age of computers and communication, science and technology, information and advertisements there are several quick and effective means of spreading news. The electronic media, the press, education institution, religious, adult education, moral education, spiritual education, religious discourse etc. all are essentially complementary to each other. The governments and the policy makers can only work forwards environmental preservation on political basis. The media, if work passively on pro environmental issues, awareness can be effectively generated among people.

7.1 Economics and Valuation of ghgs emissions

Since the late 20^th century, it has been largely accepted that cause of high concentration of GHGs in atmosphere is induced by human activities. Greenhouse gas emissions and related climate change has opened up debate on overall economic losses and ways to reduce these loses. Moreover, apart from curbing monetary losses; the global political leaders as well as reputed economists are looking towards making money by saving the emissions. Recently, the researchers have started to emphasize on the actual value added to the ecosystem by curbing emissions, discrete of the economic benefits. This section will discuss the economics and ecosystem services related to the management of GHG emissions.

Origin

The initiative to curb the emissions started in 1992 with the United Nations Framework Convention on Climate Change (UNFCCC) at the Earth Summit in Rio de Janeiro. The Convention took place from 3 to 14 June, 1992. The UNFCCC is an international environmental treaty designed to “stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system”. The UNFCCC had non-binding limits on greenhouse gas emissions for individual countries and the framework was only meant for formulating precise international treaties (called “Protocols” or “Agreements”). It contained no execution mechanisms, however, it considered some negotiations and suggestions to formulate the action plans and regulation guidelines under UNFCCC to fulfill the objective of reduction of GHG emissions to the desired level.

PV clad structures and hybrid devices for rural and agricultural applications have been developed after considering different design aspects, climatic parameters, solar radiation availability on different planes, heat transfer coefficients, performance of PV in arid region and inter phasing of different components while keeping in view, practicality, application and ease of operation. Performance of the developed systems was studied, mathematical model developed and energy savings worked out for techno-economic considerations. The chronology and details of the developed PV structures and hybrid devices are as follows:

Green structure for environmental control

First of all a Quonset type environment control structure having a length of 5.3 m and width 4 m was fabricated with angle iron and iron rods and it was covered by agro-net (75%) having surface area of about 55 m². The structure having a volume of 33 m³ was fixed with long side along east west direction and had provisions for incorporation of misting unit on west side and a door on east.

5.1 Introduction

Today, energy distribution and environmental issues have developed into international threats. Demand for alternative fuels increases every day due to rapid population growth, rising living standards, and economical sustainability. With its massive population, India has become the fourth largest energy consumer country in the world after the United States, China, and Russia. Because most nations use fossil fuels to fulfill their energy demands, they create negative impacts on the environment including raising global temperatures, pollution, acid rain, and other effects. As such, the quest for alternative fuels derived from renewable resources has captured significant attention throughout the world¹. Biomass as a renewable energy sources is an important asset for achieving economic development is due to the availability of biomass at a low cost, a good conversion efficiency, the addition of jobs, and an increase in the biodiversity^2,3. Typically, biomass is composed of cellulose (40-50%), hemicelluloses (25-35%), and lignin (15-30%). Large amount of resources for biomass are available such as woody biomass, crop residues and their by-products, food processing waste, municipal solid waste, aquatic plant etc.

In the present context, pyrolysis process has been received a remarkable identity as a potential method for the conversion of any organic biomass into valuable energy rich products due to its simple in operation and also required a reasonable cost for conversion process. Pyrolysis is the thermal decomposition of any organic material at a specific temperature in absence of air/oxygen; the process ends with three resulting products, namely liquid (bio-oil), solid (biochar), and syngases⁴. Recently, biooil produced through pyrolysis process and further it up grading has been attracted a significant attention due to its major use as biofuel and as a precursor material for making chemicals⁵. The pyrolysis process also classified in three different types as per its operating conditions; slow, fast and flash pyrolysis.

8.1 General

Pyrolysis is a process that utilizes heat or fire to separate biomass, derived from the ancient Greek words “pyro” meaning fire, and “lysis” meaning separation. A thermochemical conversion process transforms biomass into a useful intermediate liquid product. This product can then be converted into a hydrocarbon biofuel, oxygenated fuel additive, or a petrochemical substitute. Pyrolysis shares similarities with other thermochemical processes such as cracking, carbonization, torrefaction, destructive distillation, dry distillation, and thermolysis. However, it is not related to gasification, which involves chemical reactions with a gasification medium.

Radioactive pollution is largely attributable to radioactivity, a natural property of certain elements, such as radium, uranium, thorium, etc. of spontaneously emitting protons (alpha particles), electrons (beta particles), and gamma rays (short-wave electromagnetic waves) through the disintegration of their atomic nuclei (nuclides).

An alpha particle consists of two protons and two neutrons, which is akin to a helium nucleus. Alpha particles travel at a very slow speed, whereas gamma rays propagate at the speed of light. The alpha particles have less penetration power than the beta and gamma rays. In human tissues, alpha particles can penetrate up to a depth of about 0.005 to 0.008 cm. The gamma rays, on the other hand, are the most penetrating and can easily pass through a human body without striking anything in between. The high penetration power of gamma rays is because they have no charge; therefore, they do not interact with anything as the charged alpha particles would do

The Ramayana written by sage Valmiki is one of the great epics of the Sanskrit language. It is most religiously regarded and popular book in Hinduism. The book is believed to be complied between 300 B.C.E. – 200 AD. However, the original story could be as old 500 B.C.E. (Goldman, 1984). There are many other versions of the epic in various regional languages found in India and South Asia (Raghunathan, 1981; Arya,1998; Dutt, 2004; Mukherjee, 2015; Sharma and Arya, 2022).

As per literature references, the name ‘Ramanaya’ is composed of two words, ‘Rama’ and ‘Aya?a’. Rama, the name of the main character of the Epic, has two contextual meanings. In the Atharvaveda, it means 'dark’, dark-coloured, ‘black' and is related to the word ‘ratri’ (night) which means 'darkness of night'. The other meaning, which can be found in the Mahabharata, is 'pleasing’, pleasant, charming, lovely, beautiful. The word ‘Ayana’ means travel or journey. Thus, Ramaya?a means ‘Rama's Journey’ from his kingdom to various places, forests during his life time (Anonymous, 1960; Tulsidas, 1966; Murthy, 2003; Kishore, 2007; Rajagopalachari, 2013).

Ramayana contains over 24,000 couplet verses, in its full form, which are divided into following seven ‘Ka??as’ (booklets) - Balaka??a, Ayodhyaka??a, Ara?yaka??a, Ki?kindhaka??a, Sundaraka??a, Yuddhaka??a, Uttaraka??a and about 500 sargas (chapters). It is regarded as one of the longest epic poems written in history (Keshavadas, 1988; Debroy, 2017; Gupta, 2021).

morally right man in the world? Narada replied that such a man is Rama, son of King Dasharatha of Ayodhya. Valmiki wanted to know more about Rama and proceeded to take bath when he saw two birds in playful mood and was happy. Suddenly, a hunter hiding in the bush shot one of the two birds. Valmiki became painful and chanted some dialogues in curse which ultimately created a new form of sloka. This was the beginning of the main narrative (Goldman, 1984; Sachithanantham, 2004).

Rapeseed
Rapeseed (Brassica napus L.), a member of the Brassicaceae family, is one of the primary oilseed crops cultivated for biodiesel production, particularly in Europe and Canada (Hoekman et al., 2012; Demirbas, 2009). Its seeds contain 40-45% oil, making it one of the most efficient oil crops for biofuel production (Ramos et al., 2009). The extracted oil is known as canola oil, which is preferred for both food and fuel applications due to its low erucic acid and glucosinolate content (Atabani et al., 2012). Rapeseed (Brassica napus L.), is one of the biofuel species that has achieved global attention, primarily due to its high yield, climatic versatility as well as its low environmental impact than fossil fuels (Singh et al., 2010). The crop is being grown all over the temperate region because its ability to resist cold temperatures and pests is a major advantage for the practice of sustainable agriculture. Moreover, the rapeseed has been positively affected by the development of biotechnology and the utilization of hybrid breeding that has been significantly increasing the oil yield and disease resistance of rapeseed, thus, facilitating the biodiesel production from this plant (Zanetti et al., 2013). Biodiesel from rapeseed has ecological advantages, significantly reducing greenhouse gas emissions by up to 50% compared to regular diesel (Hill et al., 2006). It also supports rural economic development through the diversification of farmer income and diminishing reliance on imported petroleum (FAO, 2021). The increasing price of the biofuel, chiefly supported by sustainable energy policies and reducing carbon footprint policies, is one of the driving factors for increasing demand of rapeseed as global demand for renewable energy sources rises (Euopean Commission 2021).
Sunflower
Sunflower (Helianthus annuus L.) is an important oilseed crop used for biodiesel production, especially in temperate regions like Europe and North America (Demirbas, 2009). The oil content of sunflower seeds ranges from 25-50%, making it a suitable feedstock for biofuel (Atabani et al., 2012). The characteristics of sunflower oil, such as the high content of unsaturated fatty acids, lead to better cold flow properties of its biodiesel (Ramos et al., 2009). In addition, the creation of high-oleic sunflower varieties allowed considerable improvement in oxidative stability and led to the fact that sunflower biodiesel is more suitable for storage and combustion (Dimitrijevic et al., 2017). A second

The Late Dr. APJ Abdul Kalam is described as a great patriot, visionary leader and the 11th President of India ( 2002 – 2007 ). The country would have celebrated his 84th birth day on 15th October 2015. To many like me, he was the most ideal role model that the youth of India needed, in recent time. He emerged as a complete human-being who touched the lives of people.

My first meeting with him was when he visited IPCL in eighties - as the DRDO Chief to discuss about Carbon Fiber and Composites. I was heading GSFC’s R&D Centre and other facilities like engineering plastic Nylon – 6 and their Composites and hence was invited to join the discussions. That interaction left a strong impression in my mind. Later when I became Vice Chancellor of Gujarat Agricultural University, I had many more opportunities to meet him and was often surprised at his deep rooted interest and knowledge in every sphere of Science & Technology. Subsequently, to my delight, I received an invitation from his office on the eve of 26th January evening - at home with the President and later was given more time for a one-to-one meeting the next day. Walking across the corridors of the Rashtrapathi Bhavan, the atmosphere looked rather formal and uneasy for me, but, as I was ushered into his room, I saw Dr. Kalam wearing his favourite blue shirt and smiling. He moved forward and greeted me with the same friendliness and warmth. As we started talking about Agriculture scenario, the work I was planning and the future prospects, I marveled at his understanding and insight and left the room truly inspired. 

"Where is your Dhoti, Dr. Mehta ?” Dr. Varghese Kurien surprised me as I entered his office at IRMA (Institute of Rural Management Anand). That was April 2000, soon after I had taken over as the Vice Chancellor of the erstwhile Gujarat Agricultural University (GAU) and had decided to call on him during my visit to the Anand Campus. (At that time GAU was the largest University in the Asia with four main campuses – Dantiwada, Anand, Junagadh and Navsari and about 65 experimental farms / stations spreaded all over).

Nearly 70% of the world’s population will live in cities by the year 2050, and cities currently pump out 70% of greenhouse gas emissions. Buildings alone contribute nearly 40% of emissions. This is also true for Indian cities, which are responsible for 40% of the energy use, 30% of raw material use, and 20% of land use. The residential and commercial buildings account for 31 % of the electricity consumption and are rising at 10-12 % annually. As per estimates, approximately 75% of the building stock that India will see in the year 2047 is yet to be built. For all these issues, renewable energy is the major solution.

Research methodology is a way of explaining how a researcher intends to carry out their research. It’s a logical, systematic plan to resolve a research problem. A methodology details a researcher’s approach to the research to ensure reliable, valid results that address their aims and objectives. It encompasses what data they’re going to collect and where from, as well as how it’s being collected and analyzed. The deliberation on the methodology has been made to understand the concept, methods and techniques which are utilized to design the study, collection of information, analysis of data and interpretation of the f indings for the revelation of truths and formulation of theories. This chapter deals with the method and procedure used in the study and consists of eight main parts

• Locale of research

• Pilot study.

• Sampling Design.

• Empirical measurement of the Independent and Dependent variable

• Preparation of interview Schedule.