eChapters

Introduction

In Indian Thar desert regions, excessive heat is the major problem that causes human and animal thermal discomfort. Space cooling is, therefore, the most desirable factor for the inhabitants. Various examples of dwellings responsive to climatic constraints are found in vernacular architecture throughout the world. Compact cellular layout with minimum external surface exposure to the sun, whitewashed surfaces to reduce absorptivity, blind external facades, courtyards, vegetation to provide humidity and shade, and heavy buildings constructed from high thermal capacity materials are common passive features in most of the arid regions. Wind towers for cooling ventilation are well known in Iranian and Middle East architecture, which along with cooling of the air by earth and water evaporation keep the building comfortable in hot periods. Building underground to take advantage of the large thermal storage capacity of the earth is also used in Tunisia and central Turkey.

9.1 Introduction

Solar energy can be directly converted into electrical energy through photovoltaic route. Energy conversion devices which are used to convert sun light into electricity by use of the photovoltaic effect are called solar cells. The advantages of solar cells are:

1. They are reliable, convenient and durable.
2. It is green, sustainable and pollution free technology.
3. Directly solar radiation can be converted into electricity (conversion of global solar light by flat plate photovoltaic).
4. Maintenance cost is quite low therefore suitable even in isolated and remote area, since no moving parts are involved.
5. Solar cells are quite compatible with almost all environments, respond instantaneously with solar radiation.
6. Considerable expected lifetime i.e. 20 years or even more.
7. No distribution system is required, because they are decentralized source of energy and located at the place of use.

Introduction

Agriculture has been the back bone of Indian economy and culture and it will be continued to remain as such for a long time in future. Parallel to this, energy security of a country is also very important and efforts have been given on renewable energy utilization since the fossil fuel based energy is depleting at a very fast rate. In agricultural fields, considerable amount of energy is used to do different field activities e.g. ploughing, irrigation through pumps, intercultural operations, spraying of agricultural chemicals for plant protection, harvesting, post-harvest processing etc. Therefore, there is also need to replace the conventional energy source with renewable sources to operate above mentioned agricultural activities.

Approximately, 35% of the crop production is damaged if pest and diseases are not controlled at right time. Uniform spraying of liquid formulations throughout the crop field is very important for effective control of pest and diseases. Using sprayer, liquid pesticide formulations are generally broken down to minute droplets of effective size for uniform distribution over a large surface area. Different types of sprayers are used in agricultural field based on different requirements.

Introduction

Water is the primary source of life for mankind and one of the most basic necessities for crop production. The demand for water to irrigate the crops is increasing. For sustainable production from agricultural farms, irrigating the crops at right stages is highly important. Even in rainfed situation, lifesaving irrigation during long dry spell has also been found beneficial for crop survival and to obtain the targeted yield. Considering the depletion of groundwater below the critical zone in most part of the country, energy intensive pumping for irrigation is not a viable option. Therefore utilization of available runoff water through surface storage systems followed by pumping may be a potential solution to achieve the set goal of ‘crop per drop’ mission. In this connection, micro-irrigation system including drippers and sprinklers is of great importance. However, ensured power supply is essential to operate the micro-irrigation system even in remote areas. Reliable solar photovoltaic (PV) pumps are now emerging in the market and are rapidly becoming more attractive than the traditional power sources. These technologies, powered by renewable energy sources, are especially useful in remote locations where a steady fuel supply or electricity supply is problematic. About 16 million electric pumps and 7 million diesel pumps are in operations in the country for irrigation purpose; however they are highly energy intensive. Moreover, diesel operated and electrified pumps directly or indirectly emit large amount of CO₂ gas in atmosphere and hence are not environment friendly. To meet the energy demand for irrigation, solar PV pumps have been introduced under the off-grid power generation category of National Solar Mission (NSM) with a target of 1000 MW by the end of phase II (2013-2017). The target has been revised in 2015 to a total grid connected solar power generation of 1,00,000 MW comprising 40,000 MW roof top generation and 60,000 MW grid connected solar power plants (Resolution of MNRE, Govt of India, No. 30/80/2014-15/ NSM dated 1^st July 2015).

Introduction 
In a time when the world is in dire need of sustainable energy solutions, investigating biofuels becomes an essential path to supplying the always expanding supply[1]. This book chapter explores the dynamic world of solid and liquid biofuels, providing a thorough analysis of their properties, methods of production, uses, and wider ramifications in relation to renewable energy sources. Setting the scene, the introduction clarifies the role of biofuels in the larger context of renewable energy. Exploring solid and liquid biofuels becomes critical as the globe struggles with issues like climate change, depleting fossil fuel reserves, and the need to switch to cleaner energy sources[2]. These biofuels, which are defined as energy carriers made from biomass, offer a viable substitute and have the capacity to both reduce environmental impact and promote energy security. As the chapter progresses, biofuels are divided into two main categories: liquid and solid. Biofuels that are solid, such as wood, agricultural leftovers, pellets, and briquettes, serve as a starting point for investigating alternative energy sources. This section walks readers through the complexities involved in producing solid biofuel, including harvesting, pre-treatment, and creative pelletization methods. By doing this, it highlights the renewable nature of solid biofuels and their ability to lower greenhouse gas emissions, highlighting their benefits for the environment. Simultaneously, difficulties associated with its application, ranging from administrative worries to land use issues, are examined closely. Turning its attention to liquid biofuels, the chapter tells the story of ethanol, biodiesel, and advanced biofuels. By examining the choice of feedstock, manufacturing procedures, and real-world uses, it highlights the adaptability of liquid biofuels in the energy system. Although they are not without difficulties related to land use, food production, and water use, their ability to function with current infrastructure and their critical role in improving energy security stand out as distinguishing characteristics[3].

3.1. SOLID WASTE MANAGEMENT

Solid waste management includes the transportation, processing, recycling and disposal of our waste materials. We live in a disposable world in many ways with the modernization and convenience of our world we have cluttered it with our refuse.

Overview
Humanity has produced trash since the beginning of time, whether it is from the bones and other parts of the animals they kill for food or the wood they harvest to build their carts. As civilization developed, garbage was produced that was increasingly sophisticated in character. The world of consumers emerged around the close of the 19thcentury as a result of the industrial revolution. The production of non-biodegradable solid waste led to an increase in pollution not just in the air but also on Earth itself. The rise in solid waste was also primarily caused by urbanization and population growth.
Definition of Solid Waste
Glass crockery containers, plastic containers, sludge, vehicle parts, and mounds of crop wastes are among the solid waste materials. These gather in public areas and hinder people’s regular activities.
Every family produces waste or rubbish on a daily basis. We usually toss away items that we no longer need or have any use for, which puts them in the garbage category. Depending on where it comes from, solid waste can take several forms. Understanding the proper ways to handle the trash produced has become crucial in today’s dirty world. One crucial technique for managing municipal solid waste is segregation. Representation provides a good understanding of segregation at source. Composting is a crucial waste management and treatment technique.

Solid wastes are all the wastes arising from human and animal activities, that are normally solid and that are discarded as useless or unwanted materials. It consists of the highly heterogeneous mass of discarded materials from the urban community as well as the more homogenous accumulation of agricultural, industrial and mining waste.

Urbanization, industrialization, and economic growth in India have all led to an increase in the generation of municipal solid waste (MSW) by a number of urban local bodies (ULBs). In cities with high population densities, SWM is a significant difficulty. Being a diverse country with a wide range of religious communities, customs, and traditions like India makes it more challenging to accomplish sustainable development in a country that is rapidly industrialising and improving its standard of living. Although there have been substantial changes in the social, economic, and environmental spheres, India’s SWM systems have mostly remained the same. Currently, 90% of residual waste is thrown in the informal sector rather than properly disposed of. To make SWM more sustainable, new management practises and disposal sites are needed. The inefficiency of the current waste management systems has a detrimental effect on the economy, the environment, and public health. The Ministry of Environment and Forests of India introduced regulations for garbage treatment, although there is irregular and insufficient compliance.

Introduction
Energy is necessary for people, ecosystems, and living things to function. The effects of energy generation and use on the  environmentdetermine life quality. Our main source of energy comes from the sun. Energy is used by humans for running transportation, producing industrial items, farming, and residential use.
Definitions
Energy is the ability to do tasks.
Resource: Anything we obtain from our surroundings in order to fulfill our needs and wants. A natural resource is any substance or energy that comes from the environment and is utilized by all living things, including humans. Examples of natural resources include air, water, soil, minerals, plants, and wildlife.

Introduction to Energy Sources

Consumption of nonrenewable energy sources has caused more environmental harm than any other human activity during the last century. Electricity generated from fossil fuels like coal and crude oil has resulted in excessive levels of hazardous gases in the environment. As a result, several issues exist now, such as ozone depletion and global warming. Vehicle pollution has also been a significant issue.

As a result, alternative energy sources have become increasingly vital and relevant in today’s society. These sources, such as the sun and wind, can never be depleted and are hence referred to as renewable. They produce fewer emissions and are readily available locally. Their application has the potential to significantly reduce chemical, radioactive, and thermal pollution. They stand out as a promising source of infinite clean energy. These are also known as non-conventional energy sources.

Energy, food production and various other natural resources are the limiting factors on this earth. The result of this bitter truth has been published in a book titled ‘The Limits to Growth’ in 1972. If the enormously growing population and the industrial process is not checked, then the earth’s civilization may come to an end within next hundred years.

By considering the space travel, we can very well understand about the Ecosystem. When we go away from the biosphere, it will be appropriate to develop unlimited environment through the energy accumulated from the sunlight in space. For the space travel for some days to moon and back to earth, we need not establish the entire ecological system as greater quantity of O₂ and food stuffs can be stored and CO₂ and other unwanted materials can be fixed for establishing space colonies, we have to build a special space ship with important abiotic components which can be recycled for use again and again. The vital processes of production, consumption and decomposition can be established and balanced through biotic components. In other words we are creating a complete mini human ecological machine. Before we established this system, we should be quite familiar about the space problems and its implications.

Abstract

While multiple species interact with each other in variable environments, they employ a variety of interaction strategies to withstand variation in environmental conditions. Phenotypic plasticity is one such mean allowing species to cope with environmental challenges often posed by the variation in consumer pressure, disturbances, and predation risks. In response to these and other environmental cues, expressed phenotypes can alter the sign and strength of interactions among species as these responses are often reflected in increased or decreased species competitive or facilitative abilities. Besides phenotypic plasticity, species interactions also depend on continued variation in abundances or densities of interacting species commonly termed as density-dependent interactions. Such density-dependence follows the law of diminishing returns, which means that while an individual species adds a density-dependent weight to the performance of other species, with increasing accounts, at a certain level of interaction it provides diminishing returns resulting in decreased population growth of the species. Thus, species interactions in variable environments hold two interdependent opposing forces: the growth-escalating and the growth-diminishing forces. The first one is resulted from adaptive phenotypic responses to variable environments and the second one is resulted from dynamic changes of abundances or densities of interacting species. Based on this conceptual framework, we describe community dynamics that are shaped by the balance of these two forces in variable environment. By analyzing these dynamics, we then seek underlying mechanism of Grim’s classic humped-back model of productivity-diversity relationship and also provide an alternative explanation for the intermediate disturbance hypothesis.

Keywords: Competition, Facilitation, Functional niche, Interaction continuum, Phenotypic plasticity.

Abstract

Alleviating plant salt stress and remediating saline soils are of great economic interest. Beneficial microbes such as arbuscular mycorrhizal (AM) fungi, plant growth promoting rhizobacteria (PGPR), etc. are associated with many plant species including trees. These beneficial microbes can cope up with salinity and help the plants to survive in such soils. Diversity status of beneficial microbes from the samples collected from different salt affected areas was investigated by many researchers. They screened and identified the efficient PGPR isolates isolated from saline areas for plant growth hormone (IAA) production and phosphate solubilization. The significance and highlights of the recent research as well as the past understanding of beneficial microbes and their role in reclamation of saline areas is discussed in this paper.

Abstract

The arid Kachchh district, located at the western most part of the Gujarat State in India, is known for its large extent of area under wetland habitat, which is represented by numerous seasonal water bodies and coastal habitats. Vast stretch of grasslands also available in the northern border of the district, the Banni (23⁰ 19’ to 23⁰ 52’ N; 68⁰ 56’ to 70⁰ 32’ E), which encompasses an area of 2,617 km². There are many depressions in Banni, locally known as Dhandh (shallow lakes). During monsoon, rainwater gets collected in these depressions and form shallow lakes. About 34 smaller and bigger size Dhandhs are present in the Banni. Banni communities are highly dependent on the Dhandhs for various purposes. Due to the erratic rainfall in arid Kachchh, Maldharis is highly unstable for livestock in search of fodder and water during drought years. During the normal rainfall years, livestock from neighboring talukas of Kachhh and even from other districts depends on this grassland and Dhandhs. During last decade, the Banni grasslands have seen serious environmental changes due to the invasion of an exotic plant Prosopis juliflora and increasing the salinity are the major issues of Dhandh degradation. Thus, the Banni is gradually losing its capacity to sustain human and livestock population.

Main objectives of the present paper is to examine the local perceptions of wetland and grassland change, socio-economic status, and factors that cause degradation of the wetland and vegetation resources in the Banni grassland.

Introduction

Energy conservation is the practice of using less energy to lower costs and reduce environmental impact.

A majority percentage of energy used in buildings is still from non - renewable and fossil fuel resources. Lighting and Appliances are affecting energy demand in domestic sector.

Reasons for increased energy demand

• Increase in electrical appliance ownership

• Increasing income level and reliable access

• Rise of Lighting and appliance loads

6.1. Data Interpretation and Visualization of West Bengal

Any kind of production management system or decision-making process is being organised in social ecology. No variable cannot behave discrete or free without having any kind of influence as well as impact from the vary operating ecosystem. That is how it is imperative to know and visualize the basic features in terms of its distributive characters. The distribution of features in variables through this networking and interactions ultimately contribute to a holistic visualization of social ecologization under study.

Table 6.1.1 represents the distribution of variables in terms of range i.e. maximum and minimum values, mean, standard deviation and coefficient of variation for Terai Zone, Old Alluvial Zone and New Alluvial Zone of West Bengal.

The average age (x1) of the respondent stands at 49.02. It denotes that so far as responsibility of agriculture and age base livelihood runs at the population so far as the respondent under study is peaks are at the hands of farmers approaching or passing through old ages. On the contrary the absence of young population or withdrawal of young age farmers from agriculture have got a serious implecation near and far. The cv value runs at 25.78 per cent to indicate that the distribution of variable is highly consistant.

The average of functional education (x2) of the respondent stands at 8.20.The variable education charecterization the social ecology speaks that the most of the respondents are having mid level school education.So, this has got spil over effect on the function and operation of other variables i.e. precisely the perception variables.The cv value stands at 43.69 per cent that’s good enough to infer that the distribution of the variable is highly consistent.

Introduction

Environmental problems have come to the forefront as one of the most important issues in transport policy. For a number of pollutants the road transport sector is one of the most significant contributors to environmental pollution. Vehicular emissions have been identified as one of the major contributors in deteriorating air quality in the urban centers. The problem has further been compounded by the concentration of large number of vehicles and comparatively high motor vehicle/population ratios in these cities. Substantial SPM, RSPM CO₂ and No_x are emitted. The problem of air pollution has assumed serious proportion in some of the major metropolitan cities of India. Therefore, CPCB has 296 monitoring stations all over India covering major cities.

The air pollution situation in most of the cities is still far from satisfactory. In India the major air pollution reason is automotive smoke and smoke from industries. New channels are also publishing pollution levels in selected metropolitan cities. The most polluted city in Asia is Pune. The SPM and RSPM levels are displayed at various squares to create awareness among the masses.

Smaller cities like Nanded, Parbhani and Yavatmal are not covered under National Ambient Air Quality Monitoring (NAAQM) scheme of Central Pollution Control Board (CPCB). The National Ambient Air Quality Standards for suspended particulate matters (SPM) are based on gravimetric measurement. Standards for Respirable suspended particulate matters (RSPM) are also based on gravimetric measurement. The development in terms of number of vehicles and building construction has also reached at the doors of these cities and towns. Nanded city having population of 5.5 lakhs has total number of Auto rickshaws more than 5,000. In the present study, Nanded city has been selected to check particulate matters and gaseous pollutants. Since, the city is one of the important Pilgrimage and commercial centre.

Introduction
Sugarcane (Saccharum officinarum Linn.) is a remarkable tall, perennial grass characterized by its thick, jointed stalks and long linear leaves. This remarkable plant, known for its ability to efficiently photosynthesize in warm climates, is a C4 plant. The propagation of sugarcane primarily occurs through stem cuttings, as it seldom produces flowers and seeds. It finds roots in regions with tropical and subtropical climates featuring warm temperatures, abundant sunshine, and well-drained fertile soil (Shukla et al., 2017). Cultivated for its sweet juice, rich in sucrose, sugarcane serves as the primary raw material for the production of sugar, ethanol, and various other valuable products. Its lifecycle comprises several growth stages, including germination, tillering, grand growth, and maturation, culminating in the harvesting of its valuable juice. Continuous advancements in botany and genetics have contributed to the improvement of sugarcane cultivation, enhancing yield and resistance to pests and diseases. The origins and domestication of sugarcane can be traced back to Southeast Asia, particularly in regions encompassing Papua New Guinea, Indonesia, and their vicinity. The domestication of sugarcane is believed to have commenced thousands of years ago when early human populations in these regions recognized the sweetness of the cane and began cultivating it for its edible properties. Over time, through selective breeding and propagation of plants with desirable traits, these early cultivators played a pivotal role in shaping the sugarcane we know today. This indigenous Southeast Asian plant spread to other parts of the world through trade and exploration. Historical records indicate that sugarcane found its way to India around 500 BC and reached China in the 6th century AD. Subsequently, it traversed the Middle East, the Mediterranean region, and eventually reached the Americas during the early voyages of exploration and colonization (Grivet et al., 2004). Christopher Columbus played a significant role in introducing sugarcane to the Caribbean islands during his second voyage in 1493, and from there, it made its way to other parts of the New World, including Brazil and various South American countries. The cultivation of sugarcane emerged as an essential industry in these regions, profoundly influencing their economic and social landscapes. The domestication and widespread cultivation of sugarcane have left an indelible mark on the global economy, trade, and human history. Today, sugarcane remains one of the most significant crops globally, with major producing countries, including Brazil, India, China, Thailand, and others. It stands not only as a pivotal

7.1 Summary

Never ever in the annals of human civilization, the importance of ecological resilience has become so important and imperative as we are perceiving now. Both the need and greed of food economics have driven the resource bases of our ecosystem, to a dilapidated and fragile status. By 2050 the world’s population will touch close to 9.5 billion and we have to scale up our food production 60% more then what it is right now. In India by 2040, we have to cross 450 million tons of our targeted food production to keep rhythm with population growth. By 2035 we are going to cross the population of China. Understanding the cascade of risks for climate change, as well as the vulnerabilities to these risks, is key to frame ways to adapt. Reducing vulnerabilities is key to reducing the net impacts on food security and nutrition and also to reducing long-term effects. Increasing resilience of food security in the face of climate change calls for multiple interventions, from social protection to agricultural practices and risk management..

When population pressure is soaring up, the need to produce more food from less and less available land and water, the issues of ecological resilience are coming up more swashbuckling and humongous. The aftermath of green revolution has contributed to achievement in food security on one hand, the other hand water has been contaminated and depleted, soil has been eroded with a sharp decline of organic carbon. We are losing 15 tons of topsoil per hectare per year and inviting a disruptive agro-ecosystem, the syndrome of which are quite vivid and prominent.