eChapters

This chapter deals with the findings of the study along with the discussion based on the analysis. This study tried to represent its findings as per the objectives of the study. At the end of this chapter, interrelation has been made, an explanation has been tried to put out down and an attempt has been done to reveal the cause behind it. The results and their pertaining discussion are presented according to the specific objectives of the study.

Pollution: Environmental pollution in general, may be described as the contamination of the environment with harmful wastes arising mainly from human activities. These activities release certain materials which produce pollution in the atmosphere water and soil. In simple words, environmental pollution may be defined as direct or indirect changes as a result of human activities, which adversely influence the biological and non-biological equilibrium of the environment.

8.1 General

Pyrolysis is a process that utilizes heat or fire to separate biomass, derived from the ancient Greek words “pyro” meaning fire, and “lysis” meaning separation. A thermochemical conversion process transforms biomass into a useful intermediate liquid product. This product can then be converted into a hydrocarbon biofuel, oxygenated fuel additive, or a petrochemical substitute. Pyrolysis shares similarities with other thermochemical processes such as cracking, carbonization, torrefaction, destructive distillation, dry distillation, and thermolysis. However, it is not related to gasification, which involves chemical reactions with a gasification medium.

Summary

The main greenhouse gases (GHGs) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O). CO₂ is the principal anthropogenic GHG that affects the earth’s radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310, respectively. CO₂ is responsible for most of the enhanced greenhouse effect of more than 50%, CH₄ for about 10-15% and N₂O for about 8%. The global atmospheric concentrations of CO₂, CH₄ and N₂O have increased since 1750. While CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and N₂O increased from 270 ppb to 319 ppb during the same period. Rich countries and large developing countries account for most of global CO₂ emissions (China 23.5%, USA 18.27%, India 5.83%, Russia 5.72%, Japan 4.04% and European Union 13.98%). A new climate agreement called ‘Warsaw International mechanisms (November 2013) on loss and damage’ agreed to help the poor countries to cope with loss and damage from heatwaves, droughts, floods, typhoons, desertification and rising sea levels. The Warsaw agreement also includes a set of decisions to help developing countries to reduce GHG emissions from deforestation and degradation of forests which is backed by pledges of US$280 million financing by the United States, Norway and the United Kingdom. Projections for global average temperature rise is in the range of 1.1-6.4°C; a doubling of CO₂ (from pre-industrial 280 ppm) and average sea level rise is in the range of 0.18-0.59 m (Meehel et al. 2007) and 0.5–2.4 m (Brown et al. 2013). Hot extremes, heat waves and heavy precipitation events will continue to become more frequent. Projected data show that there is an increasing global trend in the rise of average temperature in all countries, regions or sub-zones; a decreasing trend in average precipitation in most sub-tropical areas and an increasing trend of precipitation in most of the tropical and high latitudes.

1.1. Characteristics and categories
                
1.2. Litter
    Patterns of accumulation
    Successional trends
    Seasonal variations
    Fluctuations in accumulation

1.3. Dissolved organic matter
    Sources of DOM
    Fluxes of DOM

1.4. Woody detritus

1.5. Soil organic matter

1. Introduction
Pharmaceutical pollution has emerged as a significant global concern, raising alarms about its potential impacts on ecosystems and human health. The journey of pharmaceutical compounds from their point of use to contamination of water bodies reveals a complex and interconnected web of anthropogenic activities. From manufacturing plants to individual households, these pollutants persistently infiltrate aquatic systems, creating a growing

Introduction 
In a time when the world is in dire need of sustainable energy solutions, investigating biofuels becomes an essential path to supplying the always expanding supply[1]. This book chapter explores the dynamic world of solid and liquid biofuels, providing a thorough analysis of their properties, methods of production, uses, and wider ramifications in relation to renewable energy sources. Setting the scene, the introduction clarifies the role of biofuels in the larger context of renewable energy. Exploring solid and liquid biofuels becomes critical as the globe struggles with issues like climate change, depleting fossil fuel reserves, and the need to switch to cleaner energy sources[2]. These biofuels, which are defined as energy carriers made from biomass, offer a viable substitute and have the capacity to both reduce environmental impact and promote energy security. As the chapter progresses, biofuels are divided into two main categories: liquid and solid. Biofuels that are solid, such as wood, agricultural leftovers, pellets, and briquettes, serve as a starting point for investigating alternative energy sources. This section walks readers through the complexities involved in producing solid biofuel, including harvesting, pre-treatment, and creative pelletization methods. By doing this, it highlights the renewable nature of solid biofuels and their ability to lower greenhouse gas emissions, highlighting their benefits for the environment. Simultaneously, difficulties associated with its application, ranging from administrative worries to land use issues, are examined closely. Turning its attention to liquid biofuels, the chapter tells the story of ethanol, biodiesel, and advanced biofuels. By examining the choice of feedstock, manufacturing procedures, and real-world uses, it highlights the adaptability of liquid biofuels in the energy system. Although they are not without difficulties related to land use, food production, and water use, their ability to function with current infrastructure and their critical role in improving energy security stand out as distinguishing characteristics[3].

3.1 Conceptual Framework

Aconceptual framework is an analytical tool that is used to get a comprehensive understanding of the study. It embodies the specific direction by which the research will have to be undertaken. It is generally constructed to provide the researcher the element ofattainable and researchable problems and ideas supported by methodology, design, prospective analysis and empirical conclusion. The conceptual framework is often called as the research paradigm.

The subject matter of the present research is Resilience and productivity of agriculture in different social-ecology: the farmers’ perception, status and interpretation. It is expected that the terminologies and concepts used to frame up the topic need to undergo brief explanation for the better understanding of its meaning.

Resilience: Resilience is about anticipating, planning and reducing disaster risk to effectively protect persons, communities and countries, their livelihoods, health, cultural heritage, socio-economic assets and ecosystems. The ideas of ‘bounce back’, ‘spring forward’ and ‘build back better’ are often used in the context of resilience.

Productivity: Productivity is commonly defined as a ratio between the output volume and the volume of inputs. It measures how efficiently production inputs, are being used in an economy to produce a given level of output.

Agriculture: The word agriculture derives from the Latin ager (field) and colo (cultivate) signifying, when combined, the Latin agricultura: field or land tillage. But the word has come to subsume a very wide spectrum of activities that are integral to agriculture and have their own descriptive terms, such as cultivation, domestication, horticulture, arboriculture, and vegeculture, as well as forms of livestock management such as mixed crop-livestock farming, pastoralism, and transhumance. The Oxford English Dictionary (1971) defines agriculture as “The science and art of cultivating the soil, including the allied pursuits of gathering in the crops and rearing livestock; tillage, husbandry, farming.”

In any social science research, it is hardly possible to conceptualize and perceive the data and interpret the data more accurately until and unless a clear understanding of the characteristics in the area and attitude or the behavior of people is at commend of the interpreter who intends to unveil an understanding of the implication and behavioral complexes of the individual who live in the area under reference and form a representative part of the larger community. The socio-demographic background of the local people in a rural setting has been critically administered in this section. A research setting is a surrounding in which input and elements of research are contextually imbibed, interactive and mutually contributive to the system performance. Research setting is immensely important in the sense because it is characterizing and influencing the interplays of different factors and components. Besides the investigators must also have the basic knowledge about the socio demographic background of the people so as to have an easy understanding of their knowledge, attitude and behavior.

Research setting refers to the detail information of an area where the study has been conducted. The study area, generally comprises of a particular geographical area viz. a state, district, block, or gram panchayat area selected according to the convenience of the investigator who possess adequate knowledge regarding the location, communication facility etc. of the locality so that he/she can easily approach each and every corner of the area for data collection. Here. in this study the data collection was done mostly over telephone based on the interview schedule due to Covid-19 pandemic situation.

1.     Introduction    424

2.    Conventional Methods of Hydrogen Production    426

3.    Biological Methods of Hydrogen Production    429

    3.1.    Hydrogen production by biophotolysis of water, 430
        3.1.1. Photolysis by cyanobacteria (Blue green algae), 430
            3.1.1.1. Nitrogenase dependent hydrogen production, 434
            3.1.1.2.  Hydrogenase-dependent hydrogen production, 437
            3.1.1.3.  Factors affecting  hydrogen production by cyanobacteria, 440
            3.1.1.4.   Bioreactors for cyanobacterial hydrogen production, 443
            3.1.1.5. Future prospects for cyanobacterial hydrogen production, 446

1.    Introduction    496

2.    Strain Development Technologies    496

    2.1.    Screening of natural variants of microorganisms, 496
    2.2.    Genetic manipulation of microorganisms, 498
        2.2.1.    Random mutagenesis and selection, 498
        2.2.2.    Conjugation, 504
        2.2.3.    Transduction, 504
        2.2.4.    Transposition, 506
        2.2.5.      Hybridization, 507
        2.2.6.    Rare Mating, 509
        2.2.7.    Cytoduction, 510
        2.2.8.    Protoplast fusion, 511
        2.2.9.    Transformation, 511
        2.2.10.    Gene cloning and transformation (Recombinant DNA technology), 513

This chapter focuses on presenting empirical findings from data analysis to provide sufficient interpretation so to draw reliable conclusions. To enhance and complement the textual contents of the study, tables and models are frequently utilized. Additionally, the discussion serves to contextualize the study’s findings and establish connections with the research work.

Result: The Table 13 depicts the distributive characteristics of the variables for the 90 respondents under the study.

Revelation: The pattern of distribution of the variable, Age (x1 ) depicts that the maximum age of the respondents is 70 and the minimum is 26. The mean value of age of the respondents is 42.98 with standard deviation of 10.77. The distribution of the variable is strongly consistent with a CV value of 25.06 per cent.

The pattern of distribution of the variable, Education (x2 ) depicts that the maximum education of the respondents is 5 and the minimum is 2. The mean value of education of the respondents is 4.09 with standard deviation of 0.82. The Coefficient of Variation is 19.96 per cent which indicates the distribution of variable is highly consistent.

Sustainability has recently become an important factor in the engineering world. Landscape architecture is a discipline that attempts to improve the way humans interact with the environment. That interaction can be improved in various ways such as water conservation, energy conservation, or urban planning. landscape architecture encompasses urban design, community and regional planning, interior and exterior garden design, parks and recreation, historic site and natural area preservation, energy and water conservation, landscape restoration and management, among others. The varied list is an example of the dynamic essence of landscaping and provides insight into the many areas which can be improved by implementing sustainable practices.

Sustainable development practices aim to protect the quality of life of future generations. This can only be done by understanding how the natural environment operates as well as how human interactions affect it. Sustainable Landscape Architecture focuses on enhancing the holistic knowledge of the surrounding landscapes, including the complex processes which naturally occur to maintain it. Employing this knowledge within the planning phases of development should result in the reduction of negative environmental impacts due to the same. The traditional consequences of land development can be eliminated or mitigated when developers are able to foresee the consequences of their work. Many times, replicating undeveloped conditions and/or native landscapes within the overall site design will prove very useful in achieving the goals of sustainability. All of the sustainable topics covered in this chapter involve the application of a technology that resulted from better understanding the natural environment.

1.    Introduction    129
2.    Soil Microbiology    129

    2.1.    Bacteria, 130
    2.2.    Fungi, 132
    2.3.    Algae and Cyanobacteria, 132
    2.4.    Protozoa, 132
    2.5.    Viruses, 135

3.    Water Microbiology    133
4.    Microbial Associations    133

    4.1.    Neutral interactions, 133
    4.2.    Positive interactions, 133
    4.3.    Negative interactions, 133

Key facts

    
•    Endocrine disrupting chemicals (EDCs) are micropollutants with estrogenic or androgenic activities at very low concentrations and are emerging as a major concern for water quality.
    
•    EDCs include natural and synthetic hormones (Estrone or E1, 17b-estradiol or E2, Estriol or E3, 17a-ethynylestradiol or EE2); alkylphenols (nonylphenol or NP; octyphenol or OP), phenols (bisphenol-A or BPA), phthalates (Di-n-butyl phthalate or DBP, Di-2-(ethylhexyl)-phthalate or DEHP); organotins (tributyltin or TBT); and phytoestrogens (b-sitosterol, coumestrols, genistein). 
    
•    Wastewater treatment plants, intensive livestock effluents, industrial wastewaters, landfill, paper and pulp mill effluents and antifouling paints are important sources of EDCs in the environment.

Key facts
    
•    Biotoxins are naturally occurring toxic compounds produced by some freshwater cyanobacteria (blue-green algae) and marine algal species (dinoflagellates, diatoms).
    
•    Tonnes of pharmacologically active substances are used annually in human and veterinary medicines, some of these substances are excreted (human and animal) non-metabolised or an active metabolites and enter into the environment since waste water treatment plant (WWTP) cannot degrade them.
    
•    In Europe, around 4,000 different pharmaceutically active compounds are used as human and veterinary drugs and the annual consumption is about several hundred tonnes.
    
•    European Union and the United States laws require an assessment of potential risks to the environment as part of license application processes for new medicinal products.

•    Pharmaceutical products are generally polar, water soluble and low volatile molecules, it means that they have high mobility in the environment.

3.1 Introduction

A Massive increase in population, urbanization and industrialization have led to an increase in the quantity and composition of waste. The waste is increasing day by day and is estimated to reach up to 2.2 billion tonnes by 2025, according to the reports by World Bank. It becomes a necessity for every nation to fore look upon the waste management system for their respective countries. From the collection, segregation, transportation, disposal all have become an important criterion to deal with. Among the available disposal options; the easiest and environment friendly is “Recycling”. 

Introduction

The Himalayan Moutains that is relatively a younger formation and geologically a very complex occupies most of the Arunachal Pradesh. The mountain terrain covers an area of about 86000 sq. km with elevation ranging from 400 to 6000 m above mean sea level (Satapathy and Dutta 1999). The wet tropical and sub-tropical climate which prevails in most part of the Arunachal Pradesh, there is usual phenomenon of erosion and land degradation by the action of water. It is estimated by the application of USLE for Arunachal Pradesh that the total amount of about 669.35 million tones of soil is eroded annually with an average rate of 90.7 tonnes /ha/year (Singh, 1999).

Arunachal Pradesh falls under upper Brahamaputra river system constituted by 10 major river basins. They are Tawang, Kameng, Dikrong, Subansiri, Siang, Sesseri, Dibang-Tellu, and Tirap-Tiso. In Arunachal Pradesh, Dikrong river is named after joining of two main rivers Pachin and Para . In the catchments of Dikrong river light textured unstable soils with the prevalent practice of Jhum Cultivation makes the entire catchments susceptible to erosion. In every monsoon the river Dilrong carries tremendous amount of silt, gravel, small boulder and causes flood in some parts of the catchments susceptible to erosion. Singh (1999) observed that loss rate through Dikrong River was 100.98 tones/ha/year. This indicates serious threat to soil resources and there is need for urgent treatment for sediment control in Dikrong river bash.

Pongamia pinnata or Mellettia pinnata or Pongamia glabra or Derris indica (2n=2x=22) is a tropical ever green fast growing leguminous tree, with glabrous, glossy and deciduous leaves. The tree is native to India and South Asia and also found in Oceania.

In the context of a thesis, theoretical orientation refers to the conceptual or theoretical framework or perspective that informs and shapes the overall approach and analysis of the research (Natalie, 2022). It involves selecting and adopting a specific set of theories, concepts, or models that provide a foundation for understanding and interpreting the research topic. The theoretical orientation helps to guide the methodology, and provide a coherent framework for organizing and analysing the data.

Theoretical orientation in a thesis serves several purposes. It helps to establish a theoretical basis for the study, providing a context for the research and connecting it to existing knowledge and theories in the field. It also helps to guide the selection of appropriate research methods and data analysis techniques. The theoretical orientation shapes the overall structure and content of the thesis, ensuring that the study is grounded in relevant theories and concepts and contributes to the existing body of knowledge. By adopting a specific theoretical orientation, the researcher can provide a clear and systematic framework for understanding and interpreting the findings of the study. This orientation also helps to establish credibility and validity for the research, as it demonstrates the researcher’s awareness of and engagement with the existing theoretical perspectives in the field.

This chapter addresses crucial terminology and concepts essential for effectively communicating the ideas of the current study. It lays the groundwork for empirical investigation and aids in the selection of predictor variables. Additionally, this section involves a scholarly and theoretical exercise that influences the operational definition and content of the research. It combines conceptual inputs, axiomatic inputs, logical discussions, and the pursuit of knowledge to construct a theory that aligns with the research objectives and designs.