eChapters

World Scenario

The world climatic conditions are divided into Tropical; Sub-Tropical and Temperate climates. Fruits and Vegetables suited to these climatic conditions are grown successfully. Considering the nutritional and economic importance of fruits and vegetables, there is tremendous increase in area and production of fruits and vegetables throughout the world. The present global scenario of fruit and vegetable crops (areas harvested, production and productivity (yield) has been given in Table 1. It shows that the fruits 865.88 million tones has been harvested from 65.24 million Ha land with productivity 13.27 t/ha (Table 1) where as vegetables produced 1075.20 million tonnes from area 57.00 million ha with yield 18.86 tonnes/ha (Table 1) during 2016.

Presentation of data is done in form of diagram and graphs.

Diagrammatic Presentation: The data are presented in form of diagrams

The important diagrammatic presentations are simple bar diagram, multiple bar diagram, component bar diagram, percentage bar diagram & pie diagram.

Selection of diagram depends upon the nature of classification, number of characters involved and the type of comparison required to be made. In all the diagrams, the groups or classes are represented on the X-axis and the volumes or frequencies are represented in the Y-axis. The title of these visual aids should be self-explanatory.

1. Simple Bar Diagram: Simple bar diagrams consist of vertical bars of equal width. The height of these bars is proportional to the magnitude of the attribute. All bars are separated from each other by equal intervals. Simple bar diagram is used if the classification is based on attributes and if the attributes are to be compared with respect to a single character. For example, the area under different crops in a state, the production of mangoes in different years for a state, the yield of a variety at different fertilizer level, etc, can be represented by the simple bar diagram. Also the yield performance of different varieties of a crop, the effects of different treatments etc, can be compared using simple bar diagrams.

9.1. INTRODUCTION

A data are generally voluminous, so they need to be put in a compact and presentable form. This chapter deals with presentation of data precisely so that the voluminous data collected could be made usable readily and are easily comprehended. There are generally three forms of presentation of data:

Textual or Descriptive presentation

Tabular presentation

Diagrammatic presentation

In this unit, we will explore the essential skills necessary for presenting radio and television programs in a way that ensures they are engaging, effective, and successful in communication. It is widely recognized that even a program with strong content and a well-crafted script can fail to achieve the desired impact if it is not delivered in an appealing manner. We will analyze the key qualities of an effective presenter and examine the process of refining a script before it is presented on air, whether through a microphone or in front of a camera.

Presentation Techniques for Radio

The overall impact of a radio program is determined by the script, production quality, and the manner of presentation. While it can be argued that presentation and packaging fall under production quality, it is crucial to recognize that in an aural medium, the choice of words in the script is just as important as their delivery. Therefore, radio producers must be equally adept at presentation techniques, as these can significantly influence the success or failure of the entire production.

Introduction
This chapter discusses the crucial final stage of any video or multimedia production: the presentation. A well-produced program needs to be presented effectively to captivate, inform, and engage the intended audience. This chapter explores various facets of presenting a produced program, including preparation, techniques for impactful presentation, adapting to the platform and audience, and post-presentation considerations.
Understanding the Importance of Presentation
• Setting the Tone: A well-presented program captures the essence and quality of the production. Presentation directly influences how audiences perceive the program’s message, style, and relevance.
• Role in Communication: Presentation serves as the final link between the production team and the audience. It ensures the message is not only delivered but also absorbed and remembered.
• Branding and Identity: The presentation also reflects the program’s identity and the reputation of the production team or organization, affecting brand perception and credibility.

Sugar also acts as preservative at high concentration 70% or more in food products (fruit and vegetable products). High concentration of sugar in food materials create unfavourable conditions for microbial survival and prevent spoilage. Based on this principle of preservation, sugar based products are prepared from fruits and vegetables so that they can be preserved for long time. This method of preservation with high sugar concentration is principally based on the reduction in moisture content to arrest or stop microbial spoilage. Preparation of sugar based products is one of the most important aspects of home scale as well as industrial level processing of fruits and vegetables. Sugar based value added products include.

Introduction
Processing fruit and vegetables by applying heat is one of the most important methods of preservation as it exerts a positive preservative effect on the foods by destroying spoilage causing micro-organisms, enzymes, insects, parasites, etc. Heat processing also improves the availability of nutrients by improving digestibility, releasing vitamins like bound niacin, destroying anti-nutritional factors like trypsin inhibitor in some legumes including soybean, causing gelatinization of starches, and producing shelf-stable products. However, heating also causes some alteration or destruction of the sensory quality of fresh foods like changes in flavor, color, taste, and texture as a result, heatprocessed foods are perceived to have different sensory qualities than fresh produce.
Preservation by heat (thermal processing) involves heating foods in hermetically sealed containers for a specific time at a particular temperature to eliminate/kill/inactivate the microbial pathogens that endanger public health
and micro-organisms and enzymes that deteriorate food during storage. Most of the raw material used for canning is usually contaminated with different species and strains of bacteria, molds, and yeasts undergoing different stages of growth (lag phase, log phase, stationary phase, vegetative phase, sporulation phase, etc.,). Amongst these, bacterial spores are more difficult to inactivate. Thus, the criteria for heat processing chosen to inactivate the spores are also presumed to be capable of inactivating all other forms of microorganisms. Unlike fruits, most vegetables being low acid or even non-acid require a severe heat treatment to kill most bacteria. It is, therefore, necessary to work out the proper time and temperature combination for each category of food to ensure complete preservation.

Process of preservation of food stuffs such as fruits and vegetables whole or in pieces in sugar syrup or brine by heating them in hermetically sealed containers for long storage is known as canning. In other words canning is the process of sealing food stuffs hermetically in containers and sterilizing them by heat for long storage.

Introduction
The addition of sugar in foods acts as a preservative when its concentration is above 66%. It absorbs most of the available water and restricts the availability of moisture required for the growth of microorganisms. Sugar adds value to the product by imparting sweetness as well as body to these products. When sugar is boiled with acid and fruits, it is hydrolysed into glucose and fructose, the degree of inversion depending upon the pH and duration of boiling. Because of the inversion of sucrose, a mixture of sucrose, glucose and fructose is found in products like jam, jelly, marmalade, preserves and candies.
Jams, jellies and marmalades constitute an important class of fruit products preserved by using sugar as the method of preservation. Apple jam, mango jam, pineapple jam, strawberry jam and mixed fruit jam prepared by using the pulp of two or more fruits are quite common. Similarly, guava jelly and orange marmalade are also examples of such products.
A fruit preserve is made from properly matured fruit by cooking it whole or in the form of large pieces in heavy sugar syrup, till it becomes tender and transparent. A fruit impregnated with cane sugar and glucose, followed by subsequent draining and drying is called a candied fruit (Fruit candy) e.g. petha candy, ginger candy. While candied fruit covered or coated with a thin transparent coating of sugar, which imparts to it a glossy appearance is referred to as a glazed fruit. When candied fruit is coated with sugar crystals either by rolling it in powdered sugar or by allowing the sugar crystals from glucose syrup to deposit on it, it becomes a crystallized fruit (Crystallized Candy). The use of high concentrations of sugar in these products acts as a preservative. Products like Petha candy, aonla preserve, candied citrus peels, ginger candy, ginger in syrup, bael, pineapple and carrot preserve are the commercial products in this category.

Introduction
Many chemical substances are added to the food for functional purposes and in many cases, these are found to occur naturally in some foods. When these substances are added to the foods, they are known as food additives. An additive is defined as a substance or mixture of substances other than basic food ingredients that are present in a food as a result of any aspect of production, processing or packaging. Additives may be intentional as well as unintentional. Intentional additives are substances deliberately added to perform a specific function and to increase the shelf life of the products while unintentional additives have no intended function in the finished product but become part of that particular product. The food additives having significance in fruit and vegetable preservation and their mode of action are discussed as under:
Objectives of adding an additive
1. To reduce wastage and improve keeping quality e.g., the addition of potassium meta-bisulphite in squashes, benzoate in sauces, sodium propionate in bread and sorbic acids in cheese etc.,
2. To improve and maintain nutritive elements e.g., addition of vitamins for enrichment, addition of vitamin D to milk, addition of iodine to salt etc.
3. To enhance the quality and consumer acceptability of the product e.g., the addition of colouring agents, emulsifiers, thickeners etc.
4. To facilitate the preparation of foods e.g., the addition of acid to beverages, sugar in jams, jellies etc.

Bacterial species vary greatly in the ability of their cultures to remain alive after the completion of growth. Some species such as Neisseria gonorrhoeae and Streptobacillus are poorly viable and their cultures usually die out within a few day, whether kept at 37°C at room temperature or at 4-5°C; thus, they must be sub cultivated every 2-4 days for maintenance in the laboratory. Other species are much hardier,. especially sporing species which may remain viable for many years. There are also many non - sporing species (enterobacteriaceae) whose cultures, under suitable conditions, commonly remain viable for many months and often for as much as 10-20 years.

8.1 Introduction

Egg is a perishable product having short shelf life. The table eggs are of highest quality when they are laid. Preservation of eggs should start from the point of production itself.

The following practices are recommended as routine for the production of quality eggs on the farm.

1. Collection of eggs at least 3 times daily.

2. Using a clean receptacle with ventilated sides and bottom, preferably filler f lats.

1. INTRODUCTION

Fruits and vegetables represent highly perishable items of agricultural produce, mainly because of their high water content in the fresh form. Fruits and vegetables vary greatly in their protective covering, peel or rind, and also in shape, size, colour, texture and flavour. Their care starts from the field of harvest, including pre- harvest care to reduce postharvest infections and maintain quality. Because of the high rate of perishability in fresh form, fruits and vegetables are preserved by processing into several forms and choices, depending on the specific commodity to ensure reduction in mass, render storage stability for extension in storage life for both domestic and foreign trade over variable distance and time.

Food preservation can be defined as the science which deals with methods of prevention of decay or spoilage of food, thus allowing it to be stored in a fit condition for future use. In this chapter, food preservation and have been discussed in abroad way.

Thus, sugar serves as a preservative in jam and jelly, whereas salt is the major preservative for pickle. RTS (Ready-to-Serve) beverage under acidic conditions in pasteurized form can be stored at room temperature for approximately three months while dehydrated products with 5% residual moisture with suitable packages, depending on the low hygroscopicity can find storage life upto 12 months. Intermediate moisture product with 25% residual moisture is becoming popular to consume mango or papaya strips directly in ready-to-eat form. Storage quality of such forms assumes greater importance. The use of synthetic preservatives is highly questioned in the modern days. However, low concentrations of potassium meta-bisulfite and sodium benzoate are still in use. Formation of benzene under acidic conditions for example in products like RTS beverage by the use of sodium benzoate is said to be dangerous, as benzene is known to be carcinogenic. This takes us to a subject of food safety including hygiene and HACCP. Good manufacturing practices are practically the most useful form of product preparation to expect safety.

Fermentation

The decomposition of carbohydrates by microorganisms and enzymes is known as fermentation. During fermentation process of food organic acids and alcohol etc are produced which act as preservatives and also provide fine flavor and aroma that increase the value of raw materials. Most fermented foods contain a complex mixture of carbohydrates, proteins and fats etc. Fermentation occurs when microorganisms consume susceptible organic substances as a part of their own metabolic processes. Natural fermentation is probably oldest form of food preservation.

Introduction
Preservation by using common salt, spices and vinegar is a common method for the preparation of pickles, sauce and chutneys. Salt is mostly used as a preservative in pickles in combination with acid. Sodium chloride is used in brines and curing solutions or is applied directly to the food. The quantity of salt necessary to inhibit growth or harm the cells varies with the type of microorganisms. However, the minimum concentration of salt to act as a preservative is about 12%. Salt (sodium chloride) exerts its preservative action
by performing the following functions:
? Causing high osmotic pressure resulting in plasmolysis of the microbial cells.
? Dehydrating food by tying up the moisture thus making it unavailabl for the growth of microorganisms.
? Salt lowers the water activity and thus has adverse effects on microorganisms.
? Affecting the solubility of oxygen in the food and thus inhibiting the growth of aerobic microorganisms.
? Salt ionizes to yield chlorine ions, which is harmful to microorganisms.
? Chlorine in sodium chloride is a good oxidizing agent & is, therefore, toxic to microorganisms.
 

Preservation of food (fruits and vegetables) in common salt sand vinegar is called pickling. It is one of the most ancient method of preservation of fruits and vegetables. Pickling is the result of fermentation by Lactic acid forming bacteria which are found in large number on the surface of fruits and vegetables. They can grow in acidic medium and in the presence of 8-10 percent salt solution. The growth of majority of undesirable bacteria is inhibited. Lactic acid most active at 30 °C temperature. This temperature should be maintained during the process of pickling.

Preparation of pickles

Pickles are prepared with salt, vinegar and oil or combination of these ingredients. Spices are also used for pickle preparation.

Preserves (Murabbas) are prepared from whole fruits and vegetables or their segments by addition of sugar followed by evaporation to a point where microbial spoilage cannot occur. The final soluble solids concentration is reached to about 70 per cent. The finished product can be stored with or without hermetic sealing and refrigeration.

Pressure cookers are pans made of Aluminum or stainless steel. They are available in different sizes. The pressure cooker was invented in the seventeenth century by the physicist Denis Papin, and works by expelling air from the vessel, and trapping the steam produced from the boiling liquid inside. This raises the internal pressures and permits higher cooking temperatures. This, together with high thermal heat transfer from the steam, cooks food far more quickly, often cooking in between half and a quarter the time for conventional boiling. After cooking, the steam pressure is lowered back to ambient atmospheric pressure, so that the vessel can be opened safely.

Introduction
Food preservation refers to an art or science which deals with the process of prevention of decay, deterioration or spoilage of food commodity to allow it to be stored in a safe condition for future use. All foods gradually undergo deterioration or spoilage from the time immediately they are harvested or manufactured. Some commodities spoil rapidly, while others can keep longer but for limited periods. The basic purposes of food preservation are:
1. Extension of shelf life of foods thus increasing the supply
2. Ensuring the availability of seasonal foods throughout the year
3. Adding variety to the diet
4. Saving time by reducing preparation time and energy
5. Stabilizing farm prices and prices of food
6. Improving the nutritional qualities The food spoilage can be caused due to growth and activity of micro-organisms, insects or rodents, action of enzymes, chemical reactions and physical changes that takes place during processing, drying, or freezing etc. Classification of Food Depending upon the type of spoilage and level of perishability, the foods are classified into three broad categories:

Preservation means just protect the foods against the spoilage, but scientifically it may be defined as a science which deals with the process for prevention of decay or spoilage of the food is called preservation.

In other words, just controlling the physical, chemical or microbial changes in the foods is called preservation.

Physical Changes: Colour, flavour, texture and taste etc.

Chemical Changes: Carbohydrate, fats, proteins, vitamins and minerals.

Microbial Changes: Mould, yeasts and bacteria