eChapters

Abstract

Agricultural produce, such as vegetables, flowers and some fruits capture higher market price if they can be produced ahead or later than the main crop season. The demand of such unseasonal products is particularly high in the fashionable markets of big cities. Good quality of the product is, however, an essential requirement to realise this price advantage. Modern technologies can pave the way to take the full advantage of high price realisation. Growing crops under protected covers is being popularised and the application of various approaches of greenhouse technology can further extend this advantage because it offers greater control over the production environment and timing of crops. There has been a consistent increase in area under greenhouse cultivation nationally and is turning out to be a useful technology for resource efficient agriculture. The types of greenhouse structures range from hi-tech climate controlled systems to very elementary trenches or solar greenhouses used in high altitude cold desert regions of the Himalayas. Greenhouse vegetable production on a commercial scale is a capital and labour intensive production system and requires proper planning for sustainable production. Higher yield, efficient resource use, earliness, off-season availability and superior quality is the hallmark of greenhouse grown vegetables. Greenhouse vegetable production can be done from very basic soil based planting to fully automated hydroponic or soilless systems. This production system requires specialised crops and cultivars which should meet the demand of high value markets.

Introduction

Protected cultivation or greenhouse cultivation is the most common technique to grow vegetable crops qualitatively and quantitatively, and has spread widely all over the world in recent decades. Greenhouse agriculture is also known as environmentally controlled planting. The technology involves the cultivation of vegetable crops in a regulated environment in which factors such as tem perature, soil, light, humidity, irrigation, fertilizers, etc. are controlled in order to achieve optimum production and ensure a steady supply even in off-season conditions. In India, the total area under protected cultivation or green house is currently approximately 25 000 ha whereas the protected vegetable area is approximately 2000 ha which has been challenged by land ownership limita tions, decreasing crop production, rapid urbanization, ever increasing popu lation and decreasing biodiversity. Food demand, especially vegetables, has increased growing of different crop varieties as protected crops, or greenhouse has opened up a new dimension to extra production within a limited crop area.

Abstract
India faces a shortfall of 10 million tonnes in vegetable production against a demand of 135 million tonnes, exacerbated by extreme temperatures (5-48°C) that hinder year-round cultivation. Protected cultivation, including greenhouses, polyhouses, and shade nets, offers a solution by enabling off-season vegetable production, enhancing yield, quality, and input efficiency. In regions like Bundelkhand, where agriculture dominates the economy, low-cost protected structures have shown promise in cultivating high-value crops like tomatoes and capsicum, despite challenges such as farmer unawareness, limited capital, and poor infrastructure. Government initiatives, like those by Banda University of Agriculture and Technology, promote low-cost protected cultivation through training and infrastructure development, fostering agripreneurship and improving rural livelihoods by increasing yields and market prices.
Keywords: Protected Cultivation, Vegetable Production, Agripreneurship, Greenhouse Technology, Bundelkhand, Food Security, High-Value Crops, Low- Cost Structures, Rural Development, Input Efficiency

1. The protein is derived from Greek word “Proteins” which means
   1. Principal
   2. Prime
   3. Holding the first place
   4. All of the above
2. The name protein to the group of organic compounds that are utmost important to life is suggested by
   1. Mulder
   2. Berzelius
   3. Kulim
   4. Sanger

Introduction

Proteins are the most abundant organic compounds constituting major part of the body. Chemically, proteins are nitrogen containing macromolecules and polymers of L α-amino acids, which serve a wide range of structural and biological functions in animal body. For example, connective tissue made up of collagen, metabolicenzymes, neuro transmitters,signal in gmolecules, structural components of cell membranes and cell organelles, etc. all are chemically proteins.

Before goinginto the details of protein metabolism, first, we need to understand that there are majorly two sources of proteins in our body: dietary protein and body protein. Dietary protein is taken in diet, while body protein indicates the protein and amino acids synthesized in animal body to fulfill the requirements for growth and development. The digestion of proteins will not be discussed here as it has been described in detail in chapter 12. Dietary protein is digested in presence of several enzymes such as trypsin, pepsin, chymotrypsin, aminopeptidases and carboxypeptidases and is converted into mono-, di- and oligopeptides in stomach and small intestine; and finally converted into amino acids. These amino acids are transported to the systemthrough intestinal mucosa via active transport, from where they enter into the cells for further metabolism. Therefore, ‘metabolismof proteins’ is more appropriatelylearnt as ‘metabolism of amino acids’.

Abstract

The field of bioinformatics emerged as a tool to facilitate biological discoveries more than 10 years ago. Structure prediction is fundamentally different from the inverse problem of protein design. Protein structure prediction is one of the most important goals pursued by bioinformatics and theoretical chemistry; it is highly important in medicine and biotechnology. Structure prediction is fundamentally different from the inverse problem of protein design. While the genome of many organism have been sequenced over the last few year, transforming such raw sequence data into knowledge remains a hard task. A great number of prediction program for genes have been developed hat try to address this problem, which consists of locating the genes along a genome.

1. Introduction

Protein–protein interactions serve as the hub of the functioning of a living cell, coordinate biological processes as well as form core for interactomics system of living organisms. Various biological processes as signal transduction, cell-cell communication, ingestion or expulsion of any macromolecule, host parasite interaction, diseases as cancer and many other metabolic networks employ protein–protein interactions. During such a process two or more proteins interact transiently with each other or form complex for a long period of time. Thus attempts have been made for years to study comprehensive mechanism of such protein–protein interactions by various branches of sciences such as biochemistry, quantum chemistry, molecular dynamics, chemical biology and signal transduction. The availability of three-dimensional (3D) structure of proteins is a prerequisite for understanding functions of protein complexes at a molecular level as well as amino acid interactions within a complex.

Abstract

Protein-protein interactions play a major role in most cellular processes. Many essential cellular processes such as signal transduction, transport, cellular motion and most regulatory mechanisms are mediated by protein-protein interactions. The study of protein-protein interactions is of great importance in determining the biological function and impact of proteins. The experimental techniques remain expensive, time-consuming and labor-intense. Computational methods play an important role at all the stages of determining protein-protein interactions. In this chapter, we describe the different types of protein-protein interactions, computational methods, currently available databases and tools, protein-protein docking and as well as protein-protein interactions as drug targets.

1. INTRODUCTION

Proteins are polymers of amino acids. Twenty different types of amino acids occur naturally in proteins. Proteins differ from each other according to the type, number and sequence of amino acids that make up the polypeptide backbone. Proteins are the important constituents of foods for a number of reasons. They are a major source of energy, as well as containing essential amino-acids, like lysine, tryptophan, methionine, leucine, isoleucine and valine which are essential to human health, but which the body cannot synthesize. Proteins are also the major structural components of many natural foods, often determining their overall texture, e.g., tenderness of meat or fish products. Isolated proteins are often used in foods as ingredients because of their unique functional properties, i.e., their ability to provide desirable appearance, texture or stability.

Proteins are complex organic molecules made up of carbon, hydrogen, oxygen, and nitrogen. Most proteins also contain sulphur and phosphorus and also play an important role in food preparation. The final quality of many food products are influenced by how the proteins are treated while food is being prepared.

1.    The basic building block(s) of proteins is/are

(a) Amino acids

(b) Phenolics

(c) Carboxylic acids

(d) Fatty acids

2.    Alpha helix and ?- pleated sheet are characteristic of protein structure?

(a) Primary

(b) Secondary

(c) Tertiary

(d) Quaternary

1 Professor (Retired) Department of Agricultural Extension and Rural Sociology, Tamil Nadu Agricultural University, Coimbatore-641 003, Tamil Nadu

2 Assistant Professor, Department of Agricultural Extension and Rural Sociology, Agricultural College & Research Institute, Madurai-625 104

Introduction

The word ‘Extension’ was first coined in U.S.A. in the mid-part of the nineteenth century, to connote extension knowledge of improved practices in agriculture and home economics from Land Grant Colleges to the farmers and their families in their fields and homes. The literary meaning of Extension is ‘Ex’-out; Tensio’-to stretch i.e. Extension means stretching out. Extension, in the context of rural community development, means educating rural people and it implies production of changes in human behaviour -in terms of attitude, knowledge and skill. Extension is often misconceived as disbursement of subsidies and providing certain material incentives; it is certainly not.

There are several conventional extension techniques approaches and tools for transfer of any farm -related technologies, be it any enterprise, crop or their mix. Extension teaching aids are broadly classified as:

Agricultural research in India has contributed new varieties of crops and production technologies for increased production at the national level. These modern technologies benefited only a particular section but farm youth in rainfed areas are facing many problems. One of the problems identified in the diffusion of technologies to farm youth in sustainable agriculture was the lack of appropriate technologies suitable to the farm and social situations. When farmers in rain fed areas are exposed to innovations, they react to the practices/innovations from different viewpoints. A practice appropriate to farm youth in rain fed areas must be less in cost, high in profits, less risky,  highly compatible with socio-cultural values and beliefs, less in complexity, highly trialable on a small scale and the results of the same should be easily observed and communicated. These dimensions are perceived by farmers differently and the degree to which they perceive them favourably are likely to adopt the same in rain fed areas. Many a time, several past investigations have only indicated whether the recommended package of technologies has been adopted or not by farm youth. This gives percentage of farm youth adopting the practices but not the percentage of recommended technologies adopted by them and the problems encountered by them in adopting the recommended technologies in rain fed areas.

Traditionally, Labour Laws have a protective function consisting of established standards both to protect workers in their workplace and to provide them a basic minimum level of living conditions. Alongwith this function, there also existed in most systems, a legal framework for the regulation of industrial relations between employers and workers. These functions had their impact on problems of development. The emphasis was more on labour legislation for its own sake, development being a separate proposition. This mutual lack of concern was perhaps due to historical factors. The most important aspect is the fact that in developed countries of the Western world, labour legislation followed the emergence of industrialization and in response to a demand for economic and social betterment of the workers, whereas in developing countries the emergence of labour laws preceded industrial growth.

The psychological sets that can be barriers to communication can be characterized into several basic categories. These sets can occur in the sender or in the receiver in the communication process. The sender has the ability to recognize these barrier categories when they occur and to transform communication to overcome them. However, the receiver is a different story. If the receiver is interested in communication, he or she can recognize when these barriers arise and can consciously overcome them. On the other hand, when a receiver is passive in the communication process, he or she does not recognize the barriers and the sender can do little to overcome the blockage.

These days, the concept of psychological well-being has gained more impetus in the field of health and positive psychology. Ever since research has paid more attention to ‘quality of life,’ psychological well-being has become popular. However, less importance has been given to the conceptual development of its construct, thus creating confusion between terms which at first appear similar: psychological well-being, subjective well-being, quality of life, satisfaction in life, happiness, and mental health.

The concept of psychological well-being is related to mental, emotional, and social health. Ever since research has started in this area, psychologists have started paying more attention to ‘quality of life,’ and hence psychological well-being has acquired more importance. But less importance has been paid to the conceptual development of its construct. As mental health is related to psychological well-being, it is essential to study psychological well-being.

Psychological well-being includes general well-being, quality of life, satisfaction in life, happiness, and mental health. Quality of life and subjective life satisfaction are measures of an individual’s perceived level of psychological well-being and happiness. It is sometimes used as a synonym for subjective happiness and general well-being. Psychological well-being is also related to another variable, such as ‘self-concept’. Self-concept may be stated as the quality of perceptions that each person has of himself, and this self-identity or self-image plays an important role in the psychological functioning of human well-being.

Many attempts have been made in the past to measure positive mental and emotional health, only one of which is the measure of a subjective, general sense of psychological well-being. Attempts over the years have been made to find out more about its correlates.

5.1 Introduction

The medium used in various unit operations of food process engineering such as heating, cooling, drying, mixing and transport processes, is moist air, which is a mixture of two substances. One of these is dry air which itself is a mixture of number of gases and the other is water vapour which may exist in a saturated or superheated state. The properties of moist air are called psychrometric properties and the subject, which involves determination of thermodynamic properties of moist air, is known as psychrometry. Thus, psychrometry is that branch of engineering science, which deals with the study of moist air i.e. dry air mixed with water vapour or humidity. Knowledge of properties of moist air is imperative in design of systems such as air- conditioning equipment for storage of fresh produce, dryers for drying of cereal grains, and cooling towers in food processing plants. In this chapter, important thermodynamic properties used in psychrometric computations are defined. Psychrometric charts useful in determining such properties are presented. In addition, various psychrometric process used in food process engineering are discussed.

Animal husbandry plays a vital role in the development of agriculture and is an integral component of rural economy especially in the hilly mountainous terrains of the country. Disasters, whether caused by unavoidable natural events or by avoidable, man-made events, always have been a part of human life. Hilly areas because of their geo-physical and climatic conditions are always prone to natural disasters like earthquakes, volcanic eruptions, cloud bursts and landslides etc. During the past few decades, disasters have killed millions of people and animals, adversely affecting the human and animal lives, resulting in substantial tangible and intangible losses in an unanticipated manner. Veterinary professionals by virtue of their strong scientific and technical competence play a pivotal role in human health by providing safe, wholesome and sound animal proteins which are valuable component in the prevention of malnutrition. Moreover, public health veterinarians are also actively concerned in protecting the environment by safe disposal of human and animal waste without adverse consequences. Thus, veterinarians always have a role to play in all stages of disaster mitigation and management; however the contribution of veterinarians will be most effective by integrating their expertise with other local, national and international groups and agencies involved in disaster management. In any country, funding for disaster relief should include veterinary management of disasters being recognized as a form of humanitarian assistance and a contribution to public health.

1. Background

Agriculture sustains 58 per cent of population in India. Productivity and profitability are two major planks for food security and sustainable livelihood of farmers. About 86 per cent of farmers in India own less than two hectors of land. As a result, their marketable surplus is small which poses a major challenge in ensuring remunerative price. Limitations associated with quality of produce, storage, transportation, credit as well as vagaries of weather and market are other related problems. These limitations further aggravate if the producers happen to be women due to their socio-cultural and economic position in the society. Only a decentralised and income assuring approach alone can bring prosperity to the farmers apart from gender equality. This would ultimately propel the agricultural growth of the country.

The chapter discusses one of such approaches called the public private partnership (PPP). It has gained prominence in the wake of the demand for farm reforms, trade, commerce, climate change and gender equality in recent years.