eChapters

Meaning – Points to be considered in public speaking – Effective public speaking: Group Discussion: Meaning – Procedure – Advantages – Limitations; Seminar Conferences: Definition and meaning – Steps in organizing seminar / conferences/ symposium / workshop

Definition

Public speaking is the process and act of speaking or giving a lecture to a group of people in a structured, deliberate manner intended to inform, influence, or entertain a listening audience. Public speaking is commonly understood as face-to-face speaking between individuals and an audience for the purpose of communication. It is closely allied to “presenting”, although the latter is more often associated with commercial activity. Most of the time, public speaking is to persuade the audience.

Public speaking can serve the purpose of transmitting information, telling a story, motivating people to act or some combination of those. This type of speech is deliberately structured with three general purposes: to inform, to persuade and to entertain. Knowing when public speaking is most effective and how it is done properly is a key part in understanding the importance of it.

Points to be considered in public speaking

1. Prepare to succeed

The single most important thing you can do to make your next presentation successful is to be prepared. That means make time for some serious practice. Experts suggest you spend 60% of your time to prepare your content and slides and 40% of your time to practice.

2. Say it correctly

Part of good preparation is double-checking the pronunciation of any tricky words—especially jargon. Your correct pronunciation and knowledge of industry terms lends credibility to your presentation.

Abstract

Pulse combustors provide an advantageous superposition of unsteady gas flow and high intensity sound waves. Such a combination does not only accelerate drying rates because of increased heat and mass transfer but also allows processing of liquids, pastes and agglomerated solids in a dispersed state due to aerodynamic impact from the high intensity sound wave. Over last decades, applications of pulse combustion in drying have been exploited continuously and different pulse combustion dryers have been designed and fabricated. In pilot tests and technical reports on these dryers, short drying time, high energy efficiency and product quality are generally reported, which cause that pulse combustion drying is regarded as a technology of the future in convective drying.

This chapter attempt to introduce basic knowledge and state-of the art about this emerging technology and summarizes some recent studies in pulse combustion drying and equipment design. Following a concise description of pulse combustion and pulse combustor, the basic types of pulse-combustion dryers are presented, including spray dryers, fluidized bed dryers, impinging dryers, and dryers of special design. The existing commercial applications and pilot test projects are described and potential applications are identified.

Abstract

Consumers increased response to new products with high sensory, organoleptic and nutritional potentials has impelled a search for new substitutes to processing methods. For several years, thermal processing was the main technology for producing safe products with long shelf lives, although in most cases losses of fresh flavors, vitamins, and some physicochemical characteristics were the price of safety and long-term stability. Pulsed electric field (PEF) processing as a non- thermal technique has been proven to inactivate microorganisms with minimal losses of flavor and food quality, possibly making it the answer to present-day consumer demands. In addition, the low processing temperatures used in this non- thermal technology allow the process to be nutrient preserving, energy efficient, which translates into lower costs and fewer environmental impacts. In this chapter, the the configuration of various PEF equipment, their electric configuration and recent application of this technique in processing of foods have been discussed in detail.

Q10 value: The number of times a reaction rate change with a 10oC change in temperature is called Q10 value. If reaction rate doubles with 10oC change in temperature, Q10 = 2. It is also called temperature quotient.

Q-enzyme: It is a branching enzyme responsible for formation of 1-6 bonds in amylopectin.

QHV process: It stands for Quality Has Value Process.

QO2 : It is a unit for measurement of respiration. Or It is the oxygen uptake in microlitres per milligram on dry weight per hour.

Quailing: In this practice the oranges are kept in the baskets in which they are harvested to allow the fruit to loose little moisture. It is done for a couple of hours before transport to packhouse. This practice would allow the fruit to lose a little moisture which is called quailing. This operation is done for oranges to prevent Oleocellosis.

Qualitative measurement: It is a subjective / objective measurement of the quality of the product for presence of certain compound. It gives the idea of the presence or absence of the particular compound. It deals with the nature of the substance and not its amount or quantity.

The raw material of foremost importance in bakery product is the wheat flour. Bakery units prefer the flour obtained by milling in roller flourmill with 70– 72 percent extraction. Flour quality may be defined as the ability of the flour to produce an attractive end product at competitive cost, under conditions imposed by the end product manufacturing unit. The concept of quality differs from producer and consumer point of view. However, in general, the term quality may refer to fitness of a raw material or a product for a particular process or consumer. For a consumer, the following parameters are important criteria of a product quality.

The art of confectionery manufacture date back to over 3000 years as per Egyptian records. Traditionally honey, boiled and concentrated sugar cane juices have been used in confectioneries. In modern times, alternative sweeteners from sources like corn and starches constitute an integral part of confectionery manufacture.

Owing to the huge variation in finished products as well as raw materials in food sector, Quality control has an extremely important role to play. Quality control aims at controlling variation to within a tolerable level by taking corrective actions. Statistical and non-statistical techniques are employed to measure, analyze and control variation in food products. Statistical process control, acceptance sampling and visual inspection are widely used in food and allied sectors.

Maintenance of quality and manufacture of a standard confectionery should involve a very close control of raw materials, instrumentation, and statistical analysis of finished product. Statistical evaluation with respect to finished product includes weight control, sensory evaluation and packaging tests. The quality standards are set by the quality control departments. Chemists may undertake preliminary analysis through visual inspection. Visual inspection is usually combined with sampling. This gives an idea of variation, cleanliness, infestation etc. in the sample.

India has emerged as the largest producer of milk in the World. This has boosted the confidence of producers, planners, dairy entrepreneurs and scientist alike. India has poised to play a major role in global dairy market in coming decade. The rapid growth of science and technology has positive impact on our life style and with strong trend of urbanization several demographic changes are likely to occur. There going to be ever increasing demand on the role of milk and milk products for human health. Accordingly, the demand for higher standards of milk products in terms of hygiene and safety of dairy products is to be followed. The competitiveness for the export of milk products among different dairy industry has increased in recent times due to GATT agreement. The biggest challenge before Indian dairy industry is the quality and safety of milk products indented for human consumption. Legal standards are made to have control over quality of food offered for sale and to safe guard the consumer form health hazards. It is therefore, imperative to determine different parameters that define product quality and safety. The purpose is to ensure production and distribution of products within well defined and accepted standards. This chapter deals with various parameters of product testing in order to maintain requisite prescribed standards.

Milk is a product of biological origin and is a suitable vehicle to accommodate any additive without apparent changes in its look. The quality of milk and its products depends upon quality of raw milk used in their manufacture, processing and handling conditions. It is therefore, necessary to check quality of raw milk to assess its suitability for processing, through various quick tests called “Platform Tests”

Raw milk quality assessment

(A) At collection center: - Milk from various suppliers is generally collected at dairy factory or privately owned collection centers located in marked area of milk sheds. The quantum of supply may vary from 2 – 100 Liters. As each supplier has to be paid in relation to quantity and quality of his produce, it is important to draw samples and ascertain its quality by performing quick tests for the purpose of acceptance or rejection.

Sampling procedures - The sampling procedure differs according to the nature of material and the purpose for which the sample is required. The sample collected for chemical analysis should be representative of the entire batch. Thorough mixing with proper instrument is essential to ensure representative sample. Samples for chemical analysis are to be delivered the same day for testing. If un-avoided, add small amount of preservative (Formaldehyde) to prevent deterioration and bear label to the effect.

Sample from single container – The procedure involved is thorough mixing of contents. If it is small container the contents should be poured from one vessel to another with swirling. In case of can the contents should be mixed with the help of plunger which should be moved up and down and sideways for about 10-15 times. The sample is then drawn with the help of dipper from different levels and collected in clean and dry sample bottles.

India has achieved a commendable position of being the highest milk producing country in the world. Nearly 110 million tons of milk per annum is contributed by small and marginal farmers having 2-3 milch animals which are scattered in lakhs of villages across the length and breath of India. The poor socio-economic conditions are serious constraints in producing raw milk of good quality. The quality of milk is further deteriorated during subsequent handling and transportation. Milk being a product of biological origin, is extremely vulnerable to attack by microbes. It is also a good vehicle for additives and adulterants without any apparent changes in its appearance. Thus, milk is susceptible to several post-secretion changes, some natural and some man-made.

Indian dairy industry faces a mammoth task to meet the world quality standards, particularly in the present context of globalization and increasing quality conscious consumers. In view of the highly perishable nature of milk soon after it is secreted, it is important to monitor its quality by having a firmly installed quality assurance programme along the entire production-to-supply chain. This can be possible with application of sensitive, accurate and rapid methodologies as a tool in quality assurance programmes.

Quality comprises of several attributes ranging from physical, chemical, technological and bacteriological through nutritional to aesthetic. All dairy plants have a quality assurance laboratory (Fig. 8.1) and usually follow chemical quality control with the intention of payments to contractors/producers, processing of milk and meeting mandatory requirements for end products. Quality is judged both by objective and subjective tests.

Quality assurance is essential for supplying consistent, defect-free textile and apparel products that satisfy customers, buyers and regulatory requirements. It is a proactive, process-oriented approach through which quality is planned and incorporated into every stage of production instead of being checked only at completion. Unlike quality control, which detects existing defects, quality assurance prevents defects through careful planning, training, process design and standardization. Its objectives include establishing appropriate standards and operating procedures, ensuring traceability and accountability, supporting continual improvement through audits and feedback, and developing an organization-wide quality culture. Accordingly, responsibility for quality extends from production operators to supervisors and senior management.

We all are familiar with the word “quality”. If we bring some fruits or vegetables from the market, the other family members will reflect on their quality by making observations such as: fresh or stale, good or bad quality or inferior product, etc. These observations are perceptions of consumers based on the sensory attributes of the fruit or vegetable colour, appearance, touch, smell or taste.

The quality characteristics of food that are acceptable to consumers are comprehended under the term “Food Quality. It includes external factors such as appearance (size, shape, colour, gloss, and consistency); internal factors (chemical, physical, microbiological) and characteristics/ specifications prescribed under the Government laws/standards. If consumer’s perceptions regarding quality of food are not positive he or she either will not purchase the material or will be paying less compared to when the consumer has positive perception about the quality.

The relationship between quality, profitability and market share has been well established. In the quest of quality, the dairy business is passing through revolutionary changes and the need for such changes has been very well realized. The leaders have initiated the process of setting vision and are working hard to provide the basic infrastructure with necessary resources. This has become a point of vital importance as the nation has now captured the first rank in milk production globally and is now ready and set to march ahead in the global race for dairy products market. Our country has great potential to export the dairy products such as cheese particularly Mozzarella, Feta, and indigenous products such as ghee, khoa, chhana, paneer, and array of sweets. Food items or dairy products to be traded in the international markets should be manufactured in accordance with global accepted norms and standards. In order to improve the quality of milk and milk products the Government of India is focusing on “Clean Milk Production”. As a dairy technologists and entrepreneurs, we must ensure production of quality products.

Quality control significantly affects manufacturing output, productivity and operational excellence. Techniques such as Six Sigma and DMAIC systematically identify the occurrence and causes of defects while developing solutions to reduce them. Total Quality Management further improves quality and lowers costs associated with defects, wastage and rework. Common tools employed in garment manufacturing include flow charts, check sheets, histograms, Pareto charts, scatter diagrams, control charts and cause-and-effect diagrams. Their systematic application supports continuous process improvement and better economic performance. Because the textile and apparel industry faces intense competition in domestic and global markets, manufacturers must shift from simple product inspection towards integrated, preventive and continually improving quality-management systems.

Quality control plays a vital role in ensuring food safety and freshness. Inspecting, testing, and grading fruits and vegetables is essential to confirm that food products meet safety standards. In today’s globalized food industry, quality control tests are conducted at various stages throughout the supply chain, from cultivation and harvesting to processing, packaging, transportation, and distribution.
In agriculture, the quality of grain is determined by its intended use. In ethanol production, factors such as starch content are crucial, while in food and feed manufacturing, properties like protein, oil, and sugar are of primary importance. In the milling industry, the soundness of grain is the most significant factor in determining its quality. For grain farmers, high germination percentages and seed dormancy are essential characteristics to monitor. For consumers, visual qualities such as color and flavor are key indicators of quality. Quality control ensures that the grain meets the needs of both producers and consumers while maintaining food safety.
RESOURCES FOR QUALITY CONTROL
PRE-HARVEST TESTING
Pre-harvest tests are essential tools that help growers assess the needs of their crops. These tests assist in making informed decisions regarding nutrition or pesticide applications, determining the optimal harvest windows, and supporting various farm management decisions. By conducting pre-harvest testing, farmers can enhance crop health, improve yields, and ensure that their crops are ready for harvesting at the best possible time.
Starch Iodine Test
Starch is a carbohydrate present in various plants, including apples. As apples ripen, the starch gradually converts into sugar. The amount of starch in an apple

Quality control comprises the operational activities and techniques used to ensure that products satisfy established quality requirements. While quality assurance concentrates on preventing problems, quality control identifies and corrects defects during manufacturing or service delivery. In textile and apparel production, it covers yarn strength, fabric weight, dyeing accuracy, seam strength, stitch density, garment measurements, fit, finishing and safety compliance. Inspection, testing and feedback mechanisms are used to compare actual performance with specifications and initiate corrective measures. The principal objectives are to ensure conformity with standards, detect problems in raw materials and finished goods, minimize waste and rework, reduce the cost of poor quality and satisfy customers.

1. INTRODUCTION

Quality, i.e. the degree of excellence or superiority, is a combination of attributes, properties, or characteristics that each commodity value in of human food. The relative importance of each quality component depends upon the commodity and its intended use (e.g. fresh or processed) and varies among producers, handlers, and consumers. Appearance of quality, firmness and shelf-life are important from the point of view of wholesale and retail marketers. Consumers judge quality of fresh fruits and vegetables on the basis of appearance and firmness, flavour (eating) quality of the product. Consumers are also concerned about the nutritional quality and safety of fresh fruit and vegetables.

Abstract

Determination of quality of wheat is very important because quality requirement of an individual product vary from one another. Flour quality can be defined as the ability of the flour to produce a uniformly good end product. Flour quality factors can be divided into two basic groups: those that are inherent in the wheat as a result of the genetic make up and the changes brought about by growing conditions; secondly those factors that might be altered during the process of converting wheat into flour Wheat flour constituents play an important role in determining the quality of flour. The flour quality for baking could be assessed by measuring the physical, chemical and rheological characteristics.

Wheat (Triticum aestivum L.) is one of the major cereal consumed globally in various form as food. The powder of wheat flour is prepared by grinding of wheat seeds. Soft wheat flour has low gluten content that causes its crumbly texture. However, hard wheat flour has high gluten content of about 12-14% and has elastic toughness due to which it has good shape once its baked. Wheat flour is a basic ingredient in India’s famous flatbreads, and it can also be a key ingredient in addressing major health concerns in India.

Quality management in apparel production requires an integrated approach covering every stage from material sourcing to final inspection. Important areas include fabric inspection, spreading, cutting, in-process monitoring, finishing and evaluation of completed products. The chapter explains the Acceptance Quality Limit system through practical examples and introduces Statistical Process Control for monitoring manufacturing performance. It aims to help students, practitioners and researchers understand the multiple dimensions of apparel quality and apply appropriate inspection systems. Checklists, performance indicators and corrective measures support continual improvement. Because perceptions of quality depend on value, expected performance and durability, manufacturers must translate customer expectations into measurable specifications and consistently controlled production processes.

Maturity Standards and Harvesting Indices

Harvesting : Harvesting is detaching a commodity from the point of its origin. This point of origin may be an above ground plant part i.e. shoot eg. apple, tomato etc. or an underground plant part eg potato, carrot, etc. or in water i.e. harvesting of fish from a pond (not to be covered in this book).

Abstract

India has become not only self sufficient in food grains but has also emerged as net exporter of wheat and rice. Acute famines in India have practically been eliminated, thanks to increased food availability at the national level, improved early warning systems and expanding infrastructure for more rapid transport of food grains and other products to needy areas. However, the existing post management system, strategies and policies don’t seem to match new challenges. Despite government intervention in pricing and procurement of food grains, primarily wheat and paddy, India continues to suffer heavily on account of losses and wastages incurred during the post harvest stages, which are more manmade than natural. Some losses have already occurred before the arrival of food grains in the regulated and wholesale markets and continue till food grains reach their destination. What contribute to continuing losses and wastages are improper post harvest handling, government policies and their implementation, which even stifle growth and modernisation of grain markets and processors.