eChapters

3.1. Introduction
Sports nutrition is one of the areas of nutrition that closely coordinates with human anatomy research and the science of sports. The application of nutrition science to a practical daily eating plan intended to optimise the performance of athletes in competitive events, speed up the healing and reconstruction process following intense physical activity, and supply the energy for physical activity is known as sports nutrition. It also seeks to promote wellness and general health. Nutrition is strongly connected to fitness, specifically whilst sports activities are involved. It is necessary to recognize the physiology of the workout on the way to recognizing the specific metabolic pathways that coexist in the course of sports activities practice (O’Donoghue, 2014). Three things are necessary for athletic success: genetic endowments, level of training, and nutrition. It is impossible to change one’s genetic makeup. The most efficient method for enhancing athletic performance is specialized exercise training, and any kind of workout regimen must include adequate nutrition. The dietary requirements of athletes and workout aficionados are different from those of physically inactive people due to variations in their calorie needs as well as macro- and micro- nutrient needs. To achieve peak athletic performance, it is crucial to investigate and evaluate the dietary requirements of athletes prior to, during, and following the contest (Cotugnae et al., 2005). Exercises that improve one’s heart health involve swimming, jogging, and climbing. Other exercises that improve one’s flexibility, power, and endurance of muscles involve stretching and hard training with resistance. For example, if someone decides to choose to lose excess fat and to do so, they would design a regular exercise routine that incorporates all of the above-mentioned elements, as well as choosing more nutritious foods in the diet to meet the higher demands to endeavors. Athletic performance requires sports-related abilities. These neuromotor skills, such as balancing, pace, power, durability, stamina, agility, and execution, are particular to sports.

Introduction

Spray drying process has been used for decades to encapsulate food ingredients such as flavors, lipids, and carotenoids. During this drying process, the evaporation of solvent, that is most often water, is rapid and the entrapment of the interest compound occurs quasi-instantaneously. This required property imposes a strict screening of the encapsulating materials to be used in addition to an optimization of the operating conditions. Likewise, if the encapsulated compound is of hydrophobic nature, the stability of the feed emulsion before drying should also be considered.

Abstract

Spray drying is one of the most preferred methods of converting food and pharmaceutical solutions into powder form. Very high product throughput, hygienic and highly automated process and relatively benign thermal and dehydration stress on products associated with this process has made it ubiquitous in powder manufacture. Compared to freeze drying, spray drying is significantly less expensive both in terms of operation and capital costs. In this chapter, key features of spray drying such as underlying operational principle, types of spray nozzles used, the flow pattern of droplets/particles and drying medium within the drying chamber, the particle formation process of individual droplet are discussed in considerable detail. The modelling aspect of a single droplet subjected to spray drying environment has also been included. Finally, the most commonly considered characteristics of spray dried powders including morphology, crystalline/amorphous nature and solubility are highlighted and discussed.  The content presented in this chapter will be very useful for practising engineers, technologists, researchers as well as postgraduate and undergraduate students.

1. OVERVIEW OF THE NATIONALAGRICULTURE SCENARIO - NATIONAL EXTENSION SYSTEMS, SCOPE AND IMPORTANCE

Like in many developing countries, Agriculture Sector being the backbone of the Sri Lankan economy, contributes significantly (11.3 per cent in the year 2007) to the Gross Domestic Products (GDP) and the economic growth by 7.7 per cent (Central Bank of Sri Lanka, 2007). As to the situation in 2007, 80 per cent of country’s population of 20.01 million is rural and 31.3 per cent of the total Sri Lankan work force is employed in Agriculture sector. Nearly 14.6 per cent of the population still depends on the agriculture as the main livelihood. The country’s GDP has been growing at 6.8 per cent per annum (in 2007), though that of agriculture is growing at only 3.3 per cent.

Country as a whole is constituted by 25 administrative districts all of which is encompassed into nine provinces. Of these, nearly four fifths are predominantly agricultural districts with over 60 per cent of the total population living in them. Majority of the population in these districts constitutes the farming community and they, by and large, are the ones who keep the nation feeding. Apart from plantation agriculture which looks after large scale plantation level crops like tea, rubber, coconut along with other crops like cinnamon, pepper, coffee, cloves, nutmeg etc., grown extensively for the export market, almost all other food crops are grown by farmers, majority of who own land plots less than 2 hectares. On the one hand, this makes agriculture mainstay of a major sector of the population and on the other hand they are spread nearly everywhere in the country rather thinly on the ground.

A successfully developed new cultivar should have stable performance and broad adaptation over a range of environments, seasons and locations, in addition to high yielding potential. Evaluating performance stability and range of adaptation is become increasingly important in breeding programmes. Since, stability and adaptability are important selection criteria in breeding programmes, in depth research on stability is needed for a better estimate of crop performance and adaptability.

Genotype × season interaction is of major performance to the plant breeder in developing stable but high yielding varieties of crop plants. When new varieties are tested over a series of seasons, the relative ranking of the varieties for any given attribute is rarely the same at each season. This increases the difficulty of identifying superior stable genotypes. Comstock and Moll (1963) have shown statistically the effect of large genotype × environment interaction in reducing the progress from selection.

In order to minimize the genotype × season interaction, stratification of the seasons can be practiced. The implication in stratification is that suitable selections could be made for unfavourable and favourable seasons encountered within the sampling units proposed. Stratification of the environments has been practiced for a long time to identify suitable selection that could be made for the narrower range of environments encountered within the sampling units proposed. However, even with this refinement of technique, the interactions of genotypes with locations in a sub-region with environments encountered at the same location in different years, frequently remain too large (Allard and Bradshaw, 1964). Little is known about the environmental factors contributing to such interactions. Sprague (1966) suggested that even if such information were available, the possibility of materially reducing the genotype × environment interaction in field experiments would remain questionable.

Stabilizers and emulsifiers are used in small quantities but have major effects on the structure and quality of ice cream. This chapter explains the differences between these two functional ingredient groups and describes their roles in controlling water mobility, fat destabilization, air-cell stability, texture, meltdown, and heat-shock resistance. It discusses commonly used stabilizers and emulsifiers, their individual characteristics, and the advantages of using blended systems. Particular attention is given to formulation balance and the defects that may arise from incorrect selection or dosage, including gummy texture, weak body, poor meltdown, and structural instability. Practical guidelines help manufacturers select and use these ingredients effectively for consistent product quality.

Abstract

The aim of this work was to reduce the natural fermentation period of ‘idli’ from the conventional 14 hr to10 hr by adding underutilized okara for the preparation of ‘idli’. Black gram was partially substituted with soy residue okara in the ratio of (1:1). After 14 hr of natural fermentation, the pH and total acidity of control ‘idli’ batter was 4.55 and 0.68% and that of okara fortified ‘idli’ batter was 4.57 and 0.56%, respectively. The amount of CO₂ released by the control and okara fortified batter was 12.5% and 22.5% respectively. The viable count of yeast and mold, lactics and mesophilic bacteria in control and okara batter increased with time reaching 8.4 and 9.6, 8.2 and 7.5, and 8.6 and 9.2 log10 cfu/g, respectively at the end of 10 hr of natural fermentation. Okara fortified ‘idli’ was soft and spongy compared to control ‘idli’.

Food processing sector in India has largest segment of bakery with more than 1.3 million tonnes of production from organized sector and 1.7 million tons from 1,000,000 unorganized sectors. India is second largest producer of biscuits globally. Our bakery industry is positioned third in generation of revenues among processed food sector.

This chapter introduces the standards, certification and labelling systems that establish confidence in wool quality and commercial descriptions. It discusses the roles of the International Wool Textile Organisation, ISO and the Bureau of Indian Standards in developing testing and product standards. Fibre-content declarations, care labels, Woolmark certification, quality assurance, accreditation and traceability are examined. The chapter also considers geographical indications and protection of heritage products, showing how standards and certification support fair trade, consumer protection and premium positioning.

These hydrolysates are dried conversion products available in a powdered form. Up to 20 DE they are normally referred to as malto-dextrins or hydrolised cereal solids. Above 20 DE they are more commonly termed spray dried glucose syrup solids.

Applications

Spray dried hydrolysates find application in a wide range of processed and convenience foods. Principally as filler/carrier and sweetness reducer.

They are ideally suited for blending into powdered formulations, and serve the following purposes.

As filler/carrier, they can

(1) Reduce loss of volume in contents on storage or in transit;

(2) Absorb fats and oils to retain free-flowing properties;

Starch is the storage form of carbohydrates in plants which is abundantly found in roots, tubers, stems, fruits, and cereals. It is a polysaccharide made up of glucose monomers with a chemical formula of (C6H10O5)n. Starch is composed ofamylose and amylopectin. The linear polymer amylose is the most basic form of starch while amylopectin is the branched form. Foods that are high in starch content are a good source of nutrition. Food starches are used in the food industry as thickeners and stabilizers. During the ripening of fruits, the starch is converted into sugars. Therefore, the presence of starch in fruits is used as an indication of maturity and ripening.
Principle: For estimation of starch contents, the sugars present in the sample are leached out and starch is hydrolyzed using either acid or enzymatic hydrolysis. Stach is then calculated as invert sugars.
Starch content by Acid Hydrolysis method
Reagents: Ethanol 95%, /50%,Concentrated HCl, Concentrated H2SO4, 1N NaOH solution, Phenolphthalein indicator, 10% alcoholic solution of Alphanaphthol.

Human Development and Family Studies has been prepared to strengthen conceptual understanding and examination readiness among students of community science and related disciplines. The book presents objective questions covering lifespan development, developmental challenges, early childhood care and education, guidance and counselling, marriage and family dynamics. Answer keys enable learners to assess their knowledge and identify areas requiring further study. A theoretical section provides a concise outline of important topics, supporting systematic revision and classroom instruction. The book is intended for undergraduate and postgraduate students, teachers and candidates preparing for university and competitive examinations in human development, family studies and early childhood education.

Starter cultures were unknown until 1878, when Lister isolated pure cultures of the lactic acid bacteria responsible for milk acidification. In the 1980s, improvements to standardization and ripening of butter were made by introducing pure starter cultures. During the period 1910-20, Orla-Jensen, von Freudenreich, Sherman, Hammer and other dairy microbiologists prepared pure cultures for fermented milks. Commercial production and use of starter cultures grew rapidly and was widespread at the beginning of the 20^th century.

Dairy starters are the ‘heart’ of fermented milk products, the most crucial component in the manufacture of high-quality fermented milks. The cultures are harmless food-grade microorganisms, active bacteria intentionally grown in milk or whey or other formulated media which impart desirable and predictable flavour and texture to fermented dairy products.

The dairy microorganisms employed in milk fermentation are single-strain or multiple-strain cultures of lactic acid bacteria, producing different types of fermented milk products. Usually, one or two strains dominate the milk environment. Individual strains can be selected in advance for their resistance to both bacteriophages and antibiotics. Mixed starter cultures are used to ensure that fermentation will continue after a bacteriophage attack. Bacteriophages are highly strain-specific, and if the dominant strain in a mixed-strain starter culture succumbs to an attack, the phage-resistant mutant or the next dominant culture maintains a satisfactory rate of lactic acid production.

Statistics as a wide subject is used in almost all disciplines especially in research studies. Statistics provides scientific tools for representative data collection, appropriate data analysis and summarization of data and inferential procedure for drawing valid conclusion in the face of uncertainty. Each and every researcher should have some knowledge in Statistics and must use statistical tools in his or her research, one should know about the importance of statistical tools and how to use them in their research or survey. The quality assurance of the work must be dealt with: the statistical operations necessary to control and verify the analytical procedures as well as the resulting data making mistakes in analytical work is unavoidable. The emergence of statistical software in the twenty-first century has helped different researchers in the physical and social science to improve in the quality of research. Most renowned researchers in adopting this software in their data analysis have been able to identify the immense contribution to research findings (Adetola, 2013). Any quantitative research cannot be done effectively without Statistical Software. Moreover, it enables research data for easy presentation. It helps professionals to interact with data thereby paving way for creativity and innovation. Some are user friendly interface with drop-down tips for beginners (ATS, Ucla Edu, 2014). Advances in technology have improved all our lives (Akindutire, 2013) and has allowed experts greater freedom to come out with results within a twinkle of an eye than ever before where it takes time to finish analysis. This same technology has offer tremendous opportunity to research and keep research as a more interesting field of study. This study is significant, because it is an attempt to measure the direct impact of different statistical software on research analysis.

Introduction

The state of Odisha highly depends on rainfall for the agricultural production. But rainfall distribution is very erratic and uneven which result heavy floods and droughts in different pockets of the state. Thus, the agricultural production is very unstable. It is present in the eastern region of India which is again located in the subtropical belt of medium pressure. Here hot and dry summer welcomes wet humid monsoon which last about few months. Charming autumn and with short and mild winter entertain the human life. But here climate is characterized by high temperature and medium rainfall. Topography however modifies the local climate greatly. The four meteorological seasons prevailing in the state which are: winter (January to February), pre-monsoon season (March to May), south-west monsoon season (June to September) and north east monsoon season (October-December).

Project managers need to make sense on the many data that they have. Analytical tools are used in project management to achieve such need. Such tools are used to create a forecast of potential outcomes based on the variations present in the environmental and project variables. There are different types of analytical tools used and one of the most common tools is regression analysis.

14.1. Multiple Regression

Concept: Multiple regression is the most commonly utilized multivariate technique. It examines the relationship between a single metric dependent variable and two or more metric independent variables. Multiple regressions are often used as a forecasting tool. Goal is to use the linear composite of two or more continuous and/or categorical variables (predictors) to: 1) predict scores on a single continuous variable (criterion), or to 2) explain the nature of the single continuous criterion variable from what is known about the predictor variables. In prediction, the criterion is the main emphasis because decisions are made on its value, but often times, it is difficult to directly measure or obtain a subject’s actual score on the criterion; therefore, it is important to estimate or predict one’s criterion score based on the value of the predictor scores.

Statistics: Collection of methods for planning experiments, obtaining data,

and then organizing, summarizing, presenting, analyzing, interpreting, and

drawing conclusions.

Sir R.A. Fisher: Father of modern statistics.

Population: All subjects possessing a common characteristic that is being

studied.

Sample: A subgroup or subset of the population.

Parameter: Characteristic or measure obtained from a population.

Statistic: Characteristic or measure obtained from a sample.

Karl Pearson: Study of correlation and chi-square test of goodness of fit.

W.S.Gosset: Student’s t-test for small sample

Francis Galton: Regression analysis.

Descriptive Statistics: Collection, organization, summarization, and

presentation of data.

Abstract

This study was aimed to document the Dawro people’s ethnobotanical knowledge, identify Non-Cultivated Food Plants (NCFPs) and associated challenges to their consumption. Semi-structured interviews, focus group discussions, market survey and field observations were conducted to gather the ethnobotanical data. The study documented a total of 47 non-cultivated food plant species belonging to 44 genera and 34 families. Shrubs (36.7%) and herbs (32. 7%) make up the highest proportion of these plants. The two most frequently used parts were fruits (62%) and leaves (18.4%).Over 70% of the species analyzed have additional uses, primarily for medicine, construction, and firewood. Most (68%) of the recorded species are consumed fresh without further processing and they are mainly fruits. The study found that non-cultivated food plants play a vital role to the Dawro people during food shortages.

ICTs are emerging as very important tools for agricultural extension and it is now essential for every extension worker to have working knowledge of ICT tools and devices like computers, internet, mobile phone, kisan call center, information kiosks, e-mails, expert systems, touch screen systems, mobile telephony and World Wide Web. Keeping in mind wide scope of ICT application in agriculture, the entire study entitled “Status and prospects of ICT application in agriculture through extension functionaries” was undertaken with following specific objectives.

Abstract

Agro-food industries generate a large amount of by-products and wastes. These byproducts and wastes have a negative impact in terms of the environmental concern due to the increase of pollutant disposal, and industrial sustainability because of high costs related to their management. These byproducts and wastes are rich in minerals, sugars and proteins. The composition and characteristics of wastes from different food processing industries vary and rely upon the production technique and the nature of the product. India is the second largest producer of rice/paddy in the world and the utilization of rice bran is gaining importance. However, a small fraction of these have been utilized. In case of fruits and vegetables, industrial processing of potato generates between 70 and 140 thousand tons of peels worldwide annually. Moreover, 37% of world’s total annual production of banana is shared by India. Hence, to minimize the disposal fees and trash collection new policies and methods have been developed for handling and treatment of wastes and byproducts. This chapter envisages the status of different agro-food industrial byproducts and wastes for the development of different food and non-food products.