eChapters

Introduction

Therapeutic foods are products, which are multiutility food products that may be used as nutrition as well as medicine. A nutraceutical may be defined as a substance, which has physiological benefit or provides protection against chronic disease. Nutraceuticals are used to improve health, delay the aging process, prevent chronic diseases, increase life expectancy, or support the structure and/or function of the body. Oflate nutraceuticals are receiving considerable interest due to potential nutritional, safety and therapeutic effects. The examples of therapeutic foods are the foods used for feeding of malnourished children on an emergency basis or to supplement the diets of persons with special nutrition requirements, such as the elderly. Therapeutic foods can also form a part of treatment/prevention/reduction of other health conditions such as diabetes, cardiovascular disease, obesity, anaemia and any other lifestyle disorders.

The incidences of diet-related diseases are progressively increasing due to greater availability of calorie-rich foods and a sedentary lifestyle. Obesity, diabetes, atherosclerosis, and neurodegeneration are major diet-related diseases. Nutraceuticals and functional foods represent a novel therapeutic approach to prevent or attenuate diet-related diseases.

There is always a requirement for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable methods. Some of the literature available on health foods for various diseases is summarized below. However, since the burden of diabetes in India is staggering. In 2017, 72 million cases of people suffering from diabetes were reported and the figures are expected to reach 134 million by 2025, this chapter more emphasis is given on the safe, natural treatment/reduction of diabetes by herbal means.

Abstract

Application of solar energy for drying of agricultural food products is one of the most attractive and cost-effective drying techniques. However, the intermittent nature of the solar energy is one of the major shortcomings of the solar drying system that can be alleviated by storing excess energy during the peak time and using it in off sun hours or when the direct availability of solar energy is inadequate. The use of sensible and latent heat storage systems in solar dryer is an effective way of storing thermal energy for drying purpose. This chapter will present information on different thermal energy storage (TES) materials, their advantages and disadvantages. The information available in the literature regarding the studies conducted on TES assisted solar drying systems is also covered in this chapter. In addition, some of the models that have been used by different researchers to test the performance of different TES materials are also reviewed.

Thermal preservation is among the most established methods for improving the safety and storage life of food. It uses controlled heating to destroy spoilage organisms and pathogens and to inactivate undesirable enzymes. Processing intensity varies according to the target microorganisms, food composition, packaging and required shelf life. Pasteurisation reduces pathogenic and spoilage microorganisms without achieving complete sterility, while sterilisation destroys more heat-resistant organisms and spores to produce commercially stable foods. Ultra-high-temperature processing combines very high temperatures with extremely short treatment periods. This chapter also discusses retort processing, thermal-death kinetics and microbial-inactivation models used to design safe processes while minimising nutritional and sensory damage.

INTRODUCTION

By the turn of the century, consumers have been more demanding, sophisticated and discretionary. They want much safer, higher quality, and more convenient to foods. The food processor need to get the best from their existing processing technology in addition to looking for newer ones. New and alternative food processing methods and/or novel combinations of existing methods are continually being investigated by the industry in pursuit of producing better quality foods more economically. Thermal processing is one of the most important food preservation techniques that was first introduced at the beginning of 1800 and has evolved itself in to one of the most scientific mature food processing techniques of recent times. Both science and technology have gone through tremendous transformation in the last two centuries and today it is the most reliable method to assure food safety and stability. Developments in thermal processing and evolution of non-thermal processing technologies like high pressure processing, pulsed electric field, pulsed light etc. have enhanced the utility of thermal processing principles and increased the awareness of possible alternative processing technologies.

1. INTRODUCTION

Thermal processing means preservation by application of heat. It involves heating of foods in hermetically sealed containers for a specific time at a specific temperature to eliminate the microbial pathogens that endanger public health and that micro-organisms that deteriorate food during storage. The credit for invention of thermal processing (Canning) goes to a French Confectioner, Nichola Appert. The application of heat is an important method of preserving foods and is also a means of developing texture, flavour and colour in some foods.

4.1 Introduction

The food preservation may be define as the state in which the food may retained over a period of time without being contaminated by pathogenic organism or chemicals and without losing its colour, texture, flavour and nutritional value. All the methods of food preservation must provide such an environment in and around the preserved food so that it produces one or more unfavourable conditions to the continued activity of the spoilage agents. The various methods used for food preservations are:

Based on the nature and purpose of the content, there are numerous classes of scientific communications. Theses represent the class of research communications that are of great importance to the students. Thesis is part and parcel of the master’s and doctoral programme in almost every academic institution. In some institutions, even the bachelor students are expected to submit their brief report on project.

Highlights • Banana leather can be enriched with microencapsulated ? – 3 fatty acid for value addition. • Blanching can destroy more than 80% of vitamin C content. • Henderson and Pabis model can better predict the drying kinetics of banana leather. Introduction The ever increasing demand for functional foods having numerous health benefits has been an active research ground for the food scientists around the globe. Till date, many food products have been formulated to deliver functionalities by value addition with bioactive compounds (Carvalho Barros et al., 2020). These products have been extensively studied and proved to be beneficial, especially for elder age group against various metabolic syndrome and health complications. Functional foods are edible products fortified with compounds having additional health and safety benefits such as vitamins, minerals, and bioactive compounds (Granato et al., 2020). One such example of a nutritionally dense food product with the potential of fortification to meet certain health benefits is fruit leather.

1. Introduction

This information is collected and complied by the authors from various websites for the motivation of readers particularly women. In no way it is exclusive and we do not claim accuracy of facts described here. Mere purpose is to disclose the fact that miracles do not happen but they are conditioned to manifest when determinations are reinforced by confidence. Live not to spend the time but to use it to spread your manifestations the world over.

Tillage is the physical manipulation of the soil with tools and implements which, results in good tilth for better germination and subsequent growth of crops.

Tilth is the physical condition of the soil resulting from tillage. Soil is said to be in good tilth when it is mellow, friable and adequately aerated. Tilth is dynamic. Mechanical forces may change the roughness of the soil surface, the total porosity and bulk density of the tilled layer and the aggregate or clod size. Heavy rainfall and high velocity wind or water destroys the tilth. The action of wetting and drying, freezing and thawing regenerates desirable tilth. The roughness of the soil surface is an index of the amount of water that can be stored in soil depressions and may also be related to the resistance of the soil surface to sealing. Roughness may be related to rate of evaporation, transfer of heat and air between the soil and atmosphere.

Cultivation involves management of physical environment to produce a favourable habitat for successful crop production. Primitive man used tools to disturb the soil for placing the seeds. The word tillage is derived from the Anglo-Saxon words tilian and teolian means to plough and prepare soil for seed sowing, to cultivate and to raise crops. Jethrotull who is considered as father of tillage suggested that ploughing is necessary so as to make the soil into fine particles.

Tillage is the mechanical manipulation of the soil either with tools and implements for obtaining conditions ideal for seed germination, seedling establishment and growth of crops.

Tillage includes all operations and practices that are used for the purpose of modifying soil physical characters. Tillage is the most difficult and time consuming operation in crop production. About 30 per cent of the total cost of cultivation goes for tillage operations.

1. Introduction

With the fairly recent advent of inexpensive, rapid sequencing technologies that continue to improve sequencing efficiency and accuracy, many species of animals, plants, and microbes have annotated genomic information publicly available. It is important to use this genomic information for the identification and isolation of novel and superior alleles of important genes from gene pools of the organisms

8.1. Vegetables

8.1.1. Tomato (Lycopsarsicon Esculentum)

Temperature: A warm climate crop can tolerate high temperature but cannot withstand frost. Minimum temperature for germination of seed is 8 to 10°C. Night temperature for fruit setting is 12 to 22°C. Critical night temperature for fruit setting is below 12°C. Critical day temperature for fruit setting is above 32°C. If the greenhouse can maintain the temperature as mentioned above then the non-terminal or indeterminate tomato crop can be grown for 10 to 12 month duration.

Variety: Indeterminate (producing flowers and fruits continuously along the stem as it grows) hybrid varieties resistant to nematodes or fusarium or verticilium wilt disease may be selected.

Most of the fruit, vegetables, and their products contain acid or a mixture of acids. These acids are mainly responsible for the tartness or sour taste. The level of acidity is estimated to measure the degree of tartness/sourness in the product.
Principle
Acidity in the sample is measured by titrating a known volume of sample against a standard alkali solution of known concentration using phenolphthalein as an indicator. The appearance of a light pink color indicates the endpoint of titration. However, for highly colored products like tomato sauce/ketchup, jamun juice, Rhododendron juice, mixed fruit jam, etc., accurate determination of endpoint may be difficult by using an indicator. Therefore, for such samples, acidity is measured by using electrometric methods i.e. titration to a predetermined pH value, or the sample is further diluted with distilled water to mask the interfering color. The level of titratable acidity is expressed in terms of the predominant acid. Different fruits, vegetables, and their products have different predominant acids. A list of some products having predominant acid is shown as under:

Date:

Objective: To get acquainted with classmates.

Description: This is the first lab activity and has been designed to make the students feel comfortable in their new surroundings. The aim is also to help them get acquainted with their classmates as they are still new to each other. This short fun activity will help them mingle and set the tone for upcoming activities.

Date:

Objective: To make group presentation.

Description: Group presentation refers to presentation of subject matter by few or a group of people. Group presentations are fairly common in professional life and hence, one should have a mastery over how to prepare and make group presentations. If handled properly, group presentations have several advantages over individual presentations. They are more attention grabbing and interesting as the mere presence of more than one individual introduces variety into the process. Work can be shared among the team members and knowledge and resources can be pooled for better outcome.

Date:

Objective: To practice case-based group discussion.

Overview: A case is a detailed description of anything that has happened in real life. In a case, real names are often changed to ensure confidentiality and protect the privacy, but it is not a fictitious account. A case presents a situation, or a problem and the learner is expected to suggest a solution based on the information given in the case. Case based group discussion is often used to test the analytical and reasoning ability of the participants. While participating in a case-based group discussion, the students should start by recognising and defining the problem. This is followed by listing as many solutions as possible with contributions from all the group members. In the next step, each solution is evaluated critically by the group members keeping in mind the information/ data/ facts given in the case. Finally, the best possible solution is put forth by the group. It is important to remember that there are no right or wrong solution as any option is often a trade-off.

Date:

Objective: To practice giving an entertainment or special occasion speech.

Overview: Entertainment and/ or special occasion speeches are short, simple and often meant to be humorous and entertaining. Special occasion speeches include welcome address, award presentation/ acceptance speech, after dinner speech, farewell speech, eulogy, etc. Entertainment or special occasion speech is often an impromptu speech i.e. they are usually given without any preparation.

Date:

Objective: To practice giving appropriate feedback.

Description: Communication is a cyclic process. The message originates from the source and is reaches the receiver. The receiver then decodes the message (i.e; makes sense)and sends a message back to the sender to convey his/her understanding or agreement with the message that has been received. Feedback not only completes the communication cycle, but also takes the process forward.

Date:

Objective: To practice group discussion and understand the do’s and don’ts of group discussion process.

Overview: Group discussion is a form of discourse, which occurs when more than two people recognize a common problem, exchange and evaluate information and ideas. Their efforts may be directed towards a better understanding of the topic or solving a problem. Group discussion occurs in a face-to-face or co-acting situation. It is a democratic method in which equal opportunity is given to every participant to express his/ her opinion. In formal settings, group discussion takes place under the direction of leader. Group discussion is often used by academic institutions or employers to assess certain traits and skills of the participants. The number of participants usually is around eight, but there is no hard and fast rule. When being used as a method of assessment/ evaluation, the group is given a topic.