eChapters

TRANSFER

A transfer is a change in job assignment. It may involve a promotion or demotion or no change at all in responsibility and status. It is a change in assignment in which the employee moves to another job at approximately the same level of responsibility, the same skill, the level of pay. Transfer is to be distinguished from promotion and demotion which imply an ascending or descending change respectively, in the hierarchy of positions. A transfer may be either temporary or permanent, depending upon the need, and may occur within a department, between departments and divisions, or between plants or officers within a company/organization.

Introduction
In the contemporary digital era, Information Technology (IT) has emerged as a pivotal tool in transforming business and governance processes, enabling greater efficiency, transparency, and innovation. The process transformation facilitate by IT is not merely a technical upgrade but a fundamental rethinking of how organizations operate, deliver services, and interact with stakeholders. This transformation affects every facet of an organization, from internal workflows to customer engagement, and extends to how governments interact with citizens. Integrating IT into processes fosters greater flexibility, scalability, and adaptability, allowing organisations to respond swiftly to changing environments and demands.

INTRODUCTION

Livestock is an integral part of agriculture in our country. In the decade, India’s population has grown drastically by 13% to 1.2 billion people. Meeting the nutritional needs of this swiftly growing is a gargantuan challenge. Researchers and young farmers have an important role to play in the India Government strategy to relieve pressure on food resources. The dairy industry is a large and important sector in India. We are the highest milk producers in world and milk is an integral source of nutrition and household income. But per animal production is very low as compared to developed countries. The challenge is to improve production and reproduction of dairy animals. Indian farmers feed their animals with imbalanced ration. Supplementation of mineral and vitamins in feed not only improves health status but also in turn increase the income of dairy farmers. The economic contribution of dairy sector seems to be quite substantial in the agricultural economy as well as in the national economy. Keeping in view the growing importance of dairy sector in the changing national and global economic scenario, the dairy farming vocational training programs are organized in the Extension Center of LUVAS at Jind. To undertake this work, 856 young dairy farmers of the area who have successfully completed dairy farming vocational training programmes during the year 2010 to 2013 were selected for the collection of data.

Introduction

A vision of the industrial landscape of the future that emphasises safeguarding society and the environment has lately surfaced as the “Industry 5.0” idea. People collaborating with robotics and intelligent machines are referred to as “Industry 5.0.” By utilising cutting-edge technologies like big data, Internet of Things (IoT) and robots can help people operate more efficiently and quickly. The Industry 4.0 pillars of efficiency and automation are given a more human touch through this. It aims to combine the inventiveness and problem solving abilities of human employees with the powers of mechanisation and artificial intelligence, ultimately producing a more productive and adaptable production environment. This paradigm shift emphasises the value of human decision-making and intervention in the industrial context while addressing the drawbacks of complete automation. By fusing the strengths of both robots and humans, Industry 5.0, which is still in its early stages, has the potential to revolutionise several industries. In 1987, the United Nations Commission defined sustainability as addressing the requirements of the present without compromising the capacity of people in the future to address their issues. Sustainability is essential in Industry 5.0, the next stage of industrial development characterised by growing digitization and automation. Within this paradigm, sustainable practices reduce resource consumption, trash, and emission levels, leading to more effective utilisation of resources like materials and energy. Industry 5.0’s commitment to sustainability reduces waste, carbon dioxide emissions, and environmental impacts. Utilising green technologies and eco-friendly practices helps reduce environmental impact

Transportation and distribution of fruits and vegetables are important stages   of post-harvest loss. In India,  transportation of perishable commodities is in the most precarious stage. For local market, the produce is brought either by bullock cart or tractor trollies. The long distance transportation is mainly by rails and trucks, which is very costly. The basic reason for preference to road transportation is that it takes short transit period.

Introduction Consumer demands for convenience and mildly processed meals with long shelf lives have led to unique and current developments in food packaging solutions (Dobrucka and Cierpiszewski, 2014). Additionally, the development of unique and creative packaging solutions that do not compromise food safety or quality is being fueled by the current retail trend and changing lifestyles (Dainelli et al., 2008). The widespread use of packaged meals has raised consumer demand for prepared foods like microwaveable dinners, and the growing popularity of smaller food packages all help to fuel the food industry's explosive growth in creative packaging (Restuccia et al., 2010). The rise in food-borne microbial outbreaks, which calls for the usage of packaging that possesses antimicrobial qualities while retaining food quality, is another major driver of new food packaging (Appendini and Hotchtkiss, 2002). The initial advancements in packaging were electrically powered packing equipment, flexible packaging, metallic cans, aseptic packaging, aluminium foils, and flexographic printing. A considerable movement away from metal, paperboard, and glass packaging in favour of plastic and flexible packaging was also brought about by the discovery of various materials such as polyester, polypropylene, and ethylene vinyl alcohol polymers.

Introduction

The food processing industry is a sunrise sector and contributes around 14% of Gross Domestic Product, 13% of India’s exports and 6% of total industrial investment. The Indian food retail market is expected to reach Rs 61 lakh crore by 2020 and the food processing industry accounts for 32% of the country’s total food market. This is considered as one of the largest industries in India and is ranked fifth in terms of production, consumption, export and expected growth.

The drift towards urbanisation and busier way of life, pave path to tremendous bounce in the food market. Nowadays consumer’s approach to being fit is not about going to gym, but also consulting dietitians and adopting an adjusted eating routine. Consumer’s behaviour concerning food consumption has undergone significant changes as a result of the increased awareness about different value added food products, brands, and cuisines, and also their greater willingness to experiment and ability to pay. It leads to the concept of food security in to nutritional security. Companies are offering a wider range of products to the consumers as a result of their investments into product innovation, research and development. At present, various value added products with versatile colour, shape, ingredients etc are available in worldwide market. Among this, some food items like processed fruits and vegetables and dairy products have witnessed a momentous growth in export also. Recent surveys indicated that for companies manufacturing processed foods and beverages, rise in the obesity rate is a great challenge. Hence, efforts were made to develop commercially viable, new process protocols to design healthy products from underutilised food commodities.

Previous Year Questions

1. Discuss the strengths and weaknesses of Public Food Distribution system in India. (8M, IFoS-2022)

2. Describe the vicious cycle of poverty and enlist the existing policy instruments for combating malnutrition. (20M, CSE 2022)

3. Enlist and explain the efforts of the GOI in streamlining the current levels of poverty (10 marks, CS 2022)

4. Enlist and explain the salient features of Public Distribution System as per the provisions of the National Food Security Act, 2013. (10M, CSE 2022)

5. Discuss the strengths and weaknesses of public food-grain distribution system in India. (8M, IFoS 2020)

1. Introduction

Intermediate moisture foods are semi moist foods that have some of their water bound by glycerol, sorbitol, salt or certain organic acids, thus preventing the growth of many microorganisms (Stewart et al. 2001). It is now well recognized that fruits and vegetables are dehydrated to an intermediate moisture level (20-50%) (Stewart et al. 2001; Purvi et al. 2003). As the intermediate moisture products are characterized by a semi moist consistency so these foods have enough moisture content to permit easy chewing but low enough water content to prevent spoilage production of intermediate moisture foods is based on an increased scientific understanding of the chemical reactions involved in traditional food preservation methods (Purvi et al. 2003).
There will be better retention of original flavor and texture compared to fully dried products, with concomitant reduction in bulk, weight and cost of packaging, transportation and storage. Such intermediate moisture foods are more appropriate for developing countries in view of their minimal processing requirements, stability under ambient conditions, safety, convenience, ease of nutrient content adjustment, energy savings and low capital investment. They are also eminently more suited than dehydrated or canned foods for military rations (FAO, 2005).

“Knowledge Management is the process by which an organization identifies, creates, manages and delivers information to enhance workforce performance. The purpose of knowledge management is to provide information collected from employees, best practices, clients, competitors and other sources in a format that employees can use to the productivity and quality of their work”

Before attempting to address the question of knowledge management, it’s probably appropriate to develop some perspective regarding this stuff called knowledge. Consider this observation made by Neil Fleming [1996] as a basis for thought relating to the following points.

The Hans Krebs cycle, known by different names like the citric acid or tricarboxylic acid cycle, was named after the scientist Hans Krebs. The citric acid cycle is named after the citrate product formed in the cycle. The name tricarboxylic acid is given as citrate itself, which is a tricarboxylic acid due to the presence of three carboxyl functional groups (-COOH).
The tricarboxylic acid (TCA) cycle occurs in aerobic conditions and within mitochondrial ETC, involving various sequential oxidoreductase reactions. The cycle requires Acetyl-CoA (C2 molecule) and oxaloacetate molecule (C4 molecule) to begin with the formation of a citrate molecule (C6 molecule). Acetyl-CoA is generated from the pyruvate (glycolysis), the fatty acids (lipolysis), or by oxidative deamination of specific amino acids. The complete oxidation of a glucose molecule results in the end products like energy (ATP), CO2 and H2O. A molecule of Acetyl-CoA has two carbons. It is formed from a three-carbon pyruvic acid molecule generated from the glycolysis of a sixcarbon glucose molecule. Acetyl-CoA is the substrate for this cycle and is an energy-rich molecule having a thioester bond between coenzyme A and acetic acid.
8.1 Formation of acetyl-CoA from Pyruvic Acid
Pyruvate is obtained by glycolysis or the oxidation of glucogenic amino acids. The pyruvic acid produced in the cytoplasm crosses the inner membrane of the mitochondrion to enter the mitochondrial matrix, where it undergoes oxidative decarboxylation, forming Acetyl-CoA. Acetyl-CoA carries (carrier molecule) the acetyl group to the citric acid cycle. It also links various metabolic products with the TCA cycle. Such products can be from the EMP cycle, beta-oxidation, and oxidative deamination of amino acids. Oxidative decarboxylation of pyruvic acid needs a complex enzyme system known as pyruvate dehydrogenase

1. INTRODUCTION

Agricultural Extension in Trinidad and Tobago is searching for a way to effectively use Information Communication Technologies (ICTs) to improve the delivery of services to the farming community. The notion of a demand-driven extension service seems to appeal to the Ministry of Agriculture, and many believe that ICT has the potential to become a primary enabler to improving the extension service.

The country has a population of 1.3 million with one of the highest per capita incomes in Latin American and the Caribbean (US$16,090 in 2007). Oil and gas account for 40 per cent of GDP and 80 per cent of exports. The unemployment rate is 5 per cent, and the labour market is characterized by chronic shortage, high price and low productivity particularly in the agricultural sector (Government of the Republic of Trinidad and Tobago, 2008). One of the government’s objectives is to develop a vibrant agriculture sector to reverse the decline of agriculture. The government’s operational plan 2007-2010 identifies a model for transformation which includes joint ventures with the private sector, investments to develop farms via Government to Government arrangements, and improvements in infrastructure and communication (Republic of Trinidad and Tobago, 2007).

Introduction

The tropical root and tuber crops are comprised of crops covering several genera. They are staple foods in many parts of the tropics, being the source of most of the daily carbohydrate intake for large populations. These carbohydrates are mostly starches found in storage organs, which may be enlarged roots, corms, rhizomes, or tubers. Many root and tuber crops are grown as traditional foods or are adapted to unique ecosystems and are of little importance to world food production. Others such as cassava (Manihot esculenta Crantz) and white-fleshed sweet potato (Ipomoea batatas L.) are known worldwide. Several of these crops have been termed under-exploited and deserving of considerably more research input

Potato and Banana chips: Potato chips are one of the popular snack foods consumed throughout the country. Chips are mostly prepared by small scale artisans / confectioners, and sold in plastic film or paper packs. Recently, however some of the companies have installed plants having relatively large capacities and have started marketing chips in attractive packs. The fat content generally ranges between 25-40% and moisture content between 2-4%. Potatoes having high total solids, low reducing sugars and low amylase activity are most suitable for chips manufacture.

Banana chips are prepared from varieties rich in starch having very low levels of soluble sugars and polyphenol - oxidase activity. These are mostly processed and marketed in Southern States especially in Kerala. Previously, the chips were fried in coconut oil, but now other vegetable oils are also used in their processing. Relatively, banana chips are harder in texture than potato chips.

What is Computer Network?

A computer network is a collection of computers and devices connected to each other. The network allows computers to communicate with each other and share resources and information. The Advance Research Projects Agency (ARPA) designed “Advanced Research Projects Agency Network” (ARPANET) for the United States Department of Defence. It was the first computer network in the world in late 1960’s and early 1970’s

The machine parts, which have relative motion, rub against each other. The rubbing surfaces are never perfectly smooth, even when they are highly polished. If they are observed under a microscope, one sees small depressions and elevations which get interlocked when the machine parts are under pressure, and give rise to a resisting force called frictional force. Due to friction, the parts get worn out and become useless. Friction produces heat, which, in this case, represents loss of work. To reduce this wear and loss of power caused by friction, certain foreign substances are introduced between the rubbing surfaces which keep them apart. These substances are called lubricants; and lubrication is the science of reducing friction by the application of a suitable substance between the rubbing surfaces of bodies having relative motion.

Types of Bakery Products

Baked goods are produced from either doughs or batters which are a mixture of flour and water made by mixing, beating, kneading or folding. The processing method depends on the ingredients being used and the product being made. Bread is either leavened or unleavened. Leavened bread is made from a mixture of flour, yeast, salt and water. Unleavened bread does not contain yeast and therefore does not rise. It is flat bread that is quicker to make than yeast-bread.

The word communication comes from the Latin communis meaning common. This implies that when we communicate, we are trying to establish commonality with someone through a message. Communication then is a conscious attempt to establish commonality over some idea, fact, feelings and the like with others. In essence, it is a process of getting a source and a receiver tuned together for a particular message or a series of messages.

According to Thayer (1968) there are four types of communication. They are:

Intrapersonal Communication

This refers to communicating with one’s self. It refers to organizing and converting sensory data into meaningful messages having some relevance or utility for an individual’s past, present or future behaviour. Because the psychological system of a human being is constantly engaged in making sense of its environment in the service of that orgnaism’s adaptive and goal seeking needs, the question is not whether communication is going to occur, but what communication and with what consequences. Communication is a continuous process and is determined by an individual’s take-into-account abilities and take - into - account susceptibilities. However, these take - into - account abilities are a function of the capacity of an individual’s conceptual system to ascribe meaning or significance to certain patterns and sequences of the events going on in his internal and external environment.

Intrapersonal communication is a co-function of the individual and of what is going on in his environment that has immediate relevance for him. All that we perceive and comprehend, must be perceived and comprehend through ourselves.

Types of Confectionery

Confectionery also called sweets or candy is sweet food product. Confectionery is divided into two broad and somewhat overlapping categories, Bakers’ Confections and Sugar Confections. Confections are low in micronutrients and protein but high in calories. They may be fat-free foods, although some confections, especially fried doughs, are high-fat foods. Many confections are considered to give empty calories.

Baker’s Confectionery

Baker’s confectionery also called flour confections includes principally sweet pastries, cakes, and similar baked goods. In the Middle East and Asia, flour-based confections are more dominant. Baker’s confectionery includes sweet baked goods, especially those that are served for the dessert course. Baker’s confections are sweet foods that feature flour as a main ingredient and are baked. Major categories include cakes, sweet pastries, doughnuts, scones, and cookie.

Abstract

Demand for starch is increasing day by day and is met by restricted range of crops. In recent years, substantial progress has been made in obtaining starch from non-conventional sources such as sweet potato, buckwheat, sago, water chestnut, which can be used as a substitute for conventional sources. So it is necessary to search for other underutilized and nonconventional sources of starch to meet the increased demand. Typha angustifolia, an aquatic weed containing appreciable amount of starch in its rhizome and roots, can be used for starch isolation to make its use in food and non-food derivatives. In many parts of the world, starch-rich roots of Typha angustifolia are eaten raw or boiled or dried roots are pulverized into a powder, and then, used as a thickener in soups or added to cereal flours to make biscuits and bread.

U value: U value is a measure of the heat transmission through a building part (wall or window) or through a given thickness of a material (insulation). U values with lower numbers indicate better insulating properties (Plate 614).

UHT milk: This milk is homogenized, heated to atleast 135oC for about 2-3 second, cooled rapidly and then packed in sterilized containers aseptically. The milk in packs can be stored for several months without refrigeration. The nutrient loss is negligible. Used for making yogurt commercially as it does not need to be boiled again.

UHT pasteurization: The milk is heated to ~150oC for a fraction of seconds practically no holding period. It is also called ultra pasteurization.

UHT sterilization: It is method in which food is sterilized, cooled and then aseptically placed in previously sterilized containers which are subsequently sealed in an aseptic environment.