eChapters

1. Lecithin is an example of
   1. Carbohydrates
   2. Hormones
   3. Vitamins
   4. Phospholipids
2. Which of the following acts as storehouse of energy in body?
   1. Hormone
   2. Vitamins
   3. Fats
   4. All of these

Fat-rich dairy products such as cream, makhan, butter, butter oil and ghee have played a pivotal role in growth and development of dairy industry in India as well as abroad from the time immemorial. The reference of makhan and ghee has been found in old Indian scriptures. Makhan was popularized by Lord Krishna about 5000 years before. In the traditional Indian dietary regimen, milk fat in the form of malai (cream), makhan (freshly churned butter) contributes significantly towards nourishment of people of almost all ages.

Indian dairy industry, over the years, has been converting surplus milk for the manufacture of fat-rich dairy products, especially ghee and butter with skimmilk as a byproduct because of technological and economic reasons. More than one-third of the total milk production is being utilized for the production of ghee and butter wherein milk lipids, the most expensive constituents of milk are conserved and preserved. Milk lipids play many diverse roles, some of which are essential for human health. Many of the desirable flavour and textural attributes of dairy products are due to their lipid components, consequently, butterfat has, traditionally, been highly valued. Significance of fat can also be realized from the fact that the consumer’s perception of food quality is largely based on the perceivable rich taste. Unfortunately, milk lipids are subject to chemical and enzymatic alterations which can cause flavour defects referred to as oxidative and hydrolytic rancidity, respectively. The storage stability of high-fat products is strongly influenced by these changes.

Lipids are a class of compounds that are defined by how they are isolated, rather than by their composition. Lipids are molecules that can be extracted from plants and animals by low polarity solvents such as ether, chloroform, or even acetone. They are not appreciably soluble in water. Fats and the fatty acids from which they are made belong to this group as do oils, waxes and steroids. Hydrolyzable lipids are those that contain a functional group that will react with water. The functional group is usually an ester and the list of compounds includes neutral fats, waxes, phospholipids, and glycolipids. Non- hydrolyzable lipids lack such functional groups and include steroids and fat-soluble vitamins (e.g. A, D, E, and K).

Fats and oils are composed of triacylglycerols. These are compounds prepared by the union of glycerol (1,2, 3-tri- hydroxypropane) and 3 fatty acids to form a triester. Fats and oils belong to a group of biological substances called lipids. Lipids are biological chemicals that do not dissolve in water. They serve a variety of functions in organisms, such as regulatory messengers (hormones), structural components of membranes, and as energy storehouses. Fats and oils generally function in the latter capacity. Fats differ from oils only in that they are solid at room temperature, while oils are liquid. Fats and oils share a common molecular structure. The fats and oils contain three ester functional groups. Fats and oils are esters of the tri- alcohol, glycerol (or glycerine). Therefore, fats and oils are commonly called triglycerides, although a more accurate name is triacylglycerols. Triglyceride molecules contain mostly carbon and hydrogen atoms, with only six oxygen atoms per molecule. This means that fats and oils are highly reduced (un-oxidized). Oils are particularly common in seeds, where the stored energy helps seedlings during germination, until they can exploit solar energy through photosynthesis. Fatty acids contain an even number of carbon atoms, from 4 to 36, bonded in an unbranched chain. Most of the bonds between carbon atoms are single bonds. If all of these bonds are single bonds, the fatty acid is said to be saturated, because the number of atoms attached to each carbon atom is the maximum of four. If some of the bonds between carbon atoms are double bonds, then the fatty acid is unsaturated. When there is only one double bond, it is usually between the 9th and 10th carbon atom in the chain, where the carbon atom attached to the oxygen atoms is counted as the first carbon atom. If there is a second double bond, it usually occurs between the 12th and 13th carbon atoms, while a third is usually between the 15th and 16th.

Introduction India is a country of festivals and celebrations. Indian sweets enjoy a legendary reputation across the world. India is home to a number of delicious sweets that play a vital role in every Indian celebration. While gulab jamuns, rasgullas and kaju katlis may be the most popular sweets in the country (Pal Sanchari, 2016). Functions and events in India are celebrated with intake of sweets. Also, it is customary to sweeten the mouth in social gathering like marriage, birthday, poojas, etc. (Gulati and Misra, 2014). In the past few years, guidelines are formulated based on analyses of all published scientific studies on the consumption of sugars. In view of the rising prevalence of overweight, obesity and related disorders globally, in 2002, the WHO recommended that sugar should be less than 10 percent of daily calories. The consensus dietary guidelines for Indians in 2011 recommend less than 10% of total calories from free sugars per day. In May 2014, the expert panel of WHO recently recommended decreasing sugar intake to 5% of total calorie intake to combat obesity. A high intake of added sugars is a primary risk factor for diabetes. It is these added sugars in sweets that makes them palatable, but also does the physical damage. (Willet Brian, 2011). People have developed taste towards food in which fat and sugar contents are high.

Definition

• If a communication source decodes the message that he encodes, if the message is put back to his system, we have a feedback - Berlo (1960)

• Feedback is defined as the action reaction interdependence in communication.

• The return to the input of a part of the output is the feedback.

• Feedback is the reaction on the part of the receiver to a sender's communication.

Feedback or response of the audience is the ultimate objective of any communication process or function. Response of an audience to message received may be in the form of some kind of physical or mental action. Until the desired action results, extension communication does not achieve its most essential objectives. The response of the audience (whether in the form of action or reaction) can be used by a communicator as a check of his own effectiveness and a guide to his own future action. When a source receives feedback, that is rewarding, he continues to produce the same kind of message. When he gets non-rewarding feedback, he eventually will change his message. Schramn (1955) points out that each person in the communication process is both an encoder and decoder. He receive and transmits. However, a person will decode a message and interpret it in accordance with his own experience.• Feedback means carrying out significant responses of the audience back to the communicator.

Fermentation was known to mankind from time immemorial. But, development of biochemical principles of  fermentation  was originated by  Lavoisier in France in 1789 by way of analysing chemical composition of  sugar and its fermentation products such as ethanol, carbon dioxide and  acetic acid. Many products are produced by fermentation process. In fermentation, controlled action of selected microorganisms is used to alter  texture of foods, preserve foods by production of acids or alcohol or to produce fine flavours and aromas which increase value of raw materials.

1. INTRODUCTION

Fermentation is an age old technology. It has been used by man since antiquity. It has been employed to produce a number of fermented products such as wine, beer, curd, vinegar, pickles and several others. Fermentation was discovered quite early and by chance but the underlying principles were discovered very late. Primarly fermentation was used as a method of shelf-life extension of the produce in the time of glut production, though the final product had modified sensory qualities. Thus, fermentation and drying were the main methods of preservation. With the discovery of new methods of preservation, fermentation as a method of preservation has gone into background and as technique of flavour development and product with modified sensory quality came into practice. In this chapter, fermentation as a method of preservation has been described.

INTRODUCTION

For thousands of years fermentation processes were largely natural phenomena exclusively identified with food preservation throughout the world. Fermentations can play a significant role in meeting the ever growing food requirements of world population providing benefits in the form of innovative food products with improved nutritional value and food quality along side better safety. Fermentations can be used to address a large variety of food related problems and in the development of processes to meet the demand for food. In the wake of estimations made by international organizations that global food demand and population would increase by two-fold by the year 2050, much emphasis has been placed over the ways and means to increase food production and preservation.

Fermentation in food processing typically is the conversion of carbohydrates to alcohols and carbon dioxide or organic acids using yeasts, bacteria, or a combination thereof, under anaerobic conditions.

2.1. The Story of Fermentation

Human progress depends on man’s tact to tame the forces of nature. It calls for knowledge. Prior to Age of Science, our fund of such knowledge was gained by a process of trial, error and accidental discovery. Progress was due not so much to man’s understanding as it was to his unquenchable spirit, miraculous ingenuity and indomitable persistence.

At last, in the utmost urgency of struggle for a longer, healthier and more satisfying existence, humanity taught itself the scientific method, which has changed the world, and will change it more in the coming years. This chapter deals with one of the most momentous and far reaching of all scientific achievements: the ability to harness microscopic living creatures in the service of mankind. Thanks to the wonders of fermentation technology and biochemical engineering developed by scientists and skilled technicians in industrial, governmental and university laboratories around the world, billions of microbes are now at work in industry, producing substances that give us better food $#x0026; drink, better clothing $#x0026; shelter and better medicines. Thus, the human race has entered a new era of health, comfort and longevity.

In the Beginning Art without Science: The cave man discovered that meat allowed to stand a few days was more pleasing to the taste than meat eaten soon after the kill. The cave man’s earliest descendants learned that intoxicating drinks could be made from grains and fruits.

Fermentation plays a major role in our diet and give the basic foods like bread, yoghurt, wine and cereal and legume based traditional fermented foods. The development of fermented food products can be considered as one of the greatest achievements of human civilization and goes back thousands of years. It arose from the necessity to conserve foods, to make them more digestible and also more enjoyable. During the centuries, man learned by trial and error to conduct the fermentation processes by changing physical and chemical parameters in the basic food ingredients. It took much longer, however, to discover the cause of fermentation processes: only towards the end of the 19th century it was demonstrated, that baker’s yeast is the cause of alcoholic fermentation. Through the development of the technique of "pure microbial culture", the basis for a controlled use of microbes in food industry was established.

The unique feature of fermented foods is the vital role of microorganisms that bring about essential bio-trasformations of the substrates during fermentation contributing number of desirable properties such as improved product shelf life, enriched diet with improved flavor and texture, increased safety, enriched nutritional supplement and probiotic functions. Fermentation is a chemical reaction carried out by many types of microorganisms to obtain energy. Fermentation is a process for production of a product by means of mass culture of microorganisms. In fermentation, microorganisms breakdown complex organic compounds into simpler substances. Although chemical changes and microbial growth usually mean food spoilage, in some cases fermentation is desirable and microorganisms are actually added to foods. For example, in the production of beer, wine, and other alcoholic beverages, yeasts convert sugar into ethyl alcohol and carbon dioxide. In the making of yogurt and cheese, lactic acid bacteria convert lactose, a sugar found in milk, to lactic acid. Alcohol, acids, and other compounds produced in fermentation act as preservatives, inhibiting further microbial growth. In addition to its use with alcoholic beverages, cheese, and yoghurt, fermentation is used to produce yeast bread, soy sauce, cucumber pickles, sauerkraut, and other traditional fermented food products. The variation in agroclimatic conditions prevailing in India and diverse form of dietary culture of various ethnical groups produced traditional fermented foods such as idli, dosa (rice-legume based), vada, papad, wari, balle (legume based), bhatura, jelabi, nan (wheat based), paneer, shrikhand (milk based).

Introduction

The art of fermentation process is developed as far back as thousand years ago without understanding the role of microorganism in it. It is believed that the process of fermentation originates in Indus valley during 7000 – 8000 BC. Archives of harappan civilization showed that different clay utensils were used for the fermented product and the agriculture and animal husbandry were fully developed during that period. It is evident from the artifacts of Egypt and middle east that the practice of fermentation was common in that part (Farnworth, 2003). The earliest practice of cheese making is originated from Falcate between Tigris and the Euphrates rivers in Iraq, 8000 years back. Later, Egyptians developed the use of yeast in wine and bread making during 4000 BC (Ross et al., 2002). Further, Sumarians prepared beer from fermented barley during 1750 BC. Earlier the fermenting process was an artisan way without any knowledge of microorganism. However, the main turning point was in 1608, when Antony Van Leeuwenhoek first established the use of a microscope and revealed the existence of microorganisms. Another, major finding was Pasteurization by Louis Pasteur in 1861 AD and this was the first report that documented the role of microorganism in fermentation. Later, there was a shift observed in the production of fermented food from local communities to large scale industry. The health effect of fermented food was first reported by Roman historian Pliny, who reported that fermented milk is beneficial for gastrointestinal complains. Further, a French paediatrician proved that Bifidobacteria in food prevents infants against infection (Grill et al., 1995).

1. Introduction

Now a days, foods are not intended to only satisfy hunger and to provide necessary nutrients but also to prevent nutrition-related diseases and improve physical and mental well-being of the consumers (Menrad, 2003). In this regard, functional foods play an important role. The concept of functional foods which has evolved as the role of food in the maintenance of health and well-being and in the prevention of disease, has received increased scientific and commercial interest is recent past. Growth of functional foods markets include increased consumer health awareness, increased popularity of healthy foods, search for food-based drug substitutes, self-medication approach promoted by busy lifestyles and rapidly developing health conscious markets. Functional foods can be defined as foods “that can beneficially affect one or more target functions in the body, beyond adequate nutritional effect, in a way relevant to an improved state of health and wellbeing and/or reduction of risk of disease” (Stanton et al., 2005).

Knowledge of fertilizer dose, selection of fertilizer sources, time and method of application is essential for achieving efficient use of fertilizers and profitable yield.

A. Fertilizer Dose

Fertilizer dose for crops is determined based on the field experimentation. It varies with the crops and varieties, initial fertility of the soil, soil properties, cropping system, climate, season, rainfed or irrigated crop, expected yield etc. Fertilizer dose for rainfedcrops (Kg/ha)

Fidelity is said to exist in a communication situation when there is no distortion of the message from the time it leaves the source until it is received. The most effective communication occurs when the message transmitted and the message received are identical i.e., when complete fidelity is there. Some communication theorists believe that complete fidelity can never be achieved that no message is ever received exactly as it was intended by the source. This seems likely, since the source and receiver always have different frames of reference. It is clear, however, that the fidelity of any communication can be vastly improved by several methods.

Methods to Improve Fidelity

a) Use several channels of communication

To say the same thing, thus providing a duplication of information. Multiplying the channels used will make communication redundant. A smile, a node of the head, a firm hand shake or embrace and the greeting "Hi! How are you?" often convey the same meaning – meaning that would be conveyed through a single channel or redundantly through more than one.

b) Control the speed of communication

Information is processed by different individuals at different speeds. The rate varies for each situation and for each of the individuals in various situations. In talking casually to a few friends, we might speak very quickly where as in talking to a large group of strangers, we might want to talk more slowly because of the increased possibility for misunderstanding, the intrusion of noise. Whether we should speed up, slow down, or become more succinct (briefly and clearly explained) has to be a function of the feedback we gain. There is no specific rate that is ideal for all – except that rate at which a high degree of fidelity can be attained. It is the rate at which the amount of noise affecting the communication can be minimized. Sender and receiver should be aware of how communication works and interested in achieving the greatest f idelity possible

Fidelity

Fidelity is said to exist in a communication situation when there is no distortion of the message from the time it leaves the source until it is received. The most effective communication occurs when the message transmitted and the message received are identical i.e., when complete fidelity is there. Some communication theorists believe that complete fidelity can never be achieved that no message is ever received exactly as it was intended by the source. This seems likely, since the source and receiver always have different frames of reference. It is clear, however, that the fidelity of any communication can be vastly improved by several methods.

Definition – Components to be included – Parts of field diary – Field diary in social sciences.

The field diary is the basic document which contains all the data collected. Facts and interpretations are to be written separately and conversations to be noted in the vernacular languages. Two kinds of field notes are to be observed a) Taking notes on the spot b) Writing detailed diary.

Daily field diary

It is instructed to write the field diary everyday in which a) Detailed notes of observations b) Field notes on discussion and conversations c) Details of Interpersonal communication, gossips, fold history‘s similar events d) Specific details of special events Specific reference about the main field of study for instance, the details about the process of message diffusion, various kinds of channels of communication were described in detail.

Field diary for research process documentation

The most useful tool for a process documenter is a field diary. The documenter uses a field diary to record his or her observations and thoughts in an orderly fashion. Recording observations and impressions enables a researcher to pick up clues about how the system is operating. A field diary should help the investigator understand the systems physical and social setting. It should help describe who, what, why, where, when and how. Who refers to the people or system being studied. What concerns the information gathered. Why, where, when and how provide important details about the observation.

There is no special format in writing a field diary but entries should be written daily in chronological order so information is not forgetten or changed because of forgetfulness. The critical concern is that observations are recorded in a diary regularly.

Introduction

Fresh fruit journey from the farm to the consumer’s table is an intricate process which needs a lot of attention. The way that the produce is harvested and handled is of supreme importance in relation to its quality shelf life and general market attractiveness. Improper handling practices during these critical stages can bring both quantitative and qualitative loses hence the perishable produce will lose its commercial value and appeal to the consumers (Kader, 2005). No doubt the significance of successful harvesting and post-harvest handling practices is crucial and has an impact on quality features and safety in case of fresh fruits. Poor management can cause physical assault ripening speed and more susceptibility to the growth of micro-organisms which makes the produce unsuitable for consumption or processing.