eChapters

A vacuum cleaner, also known as a sweeper or hoover, is a device that uses an air pump (a centrifugal fan in all but some of the very oldest models), to create a partial vacuum to suck up dust and dirt from fl oors and from other surfaces such as upholstery and draperies.The dirt is collected by either a dustbag or a cyclone for later disposal. Vacuum cleaners, which are used in homes as well as in industry, exist in a variety of sizes and models—small battery-powered hand-held devices, wheeled canister models for home use, domestic central vacuum cleaners, huge stationary industrial appliances that can handle several hundred litres of dust before being emptied, and self-propelled vacuum trucks for recovery of large spills or removal of contaminated soil.

The toaster is a kind of equipment used to toast bread in order to make it crisp. It has two slots which can hold two or four slices of bread. The electrical element produces the heat needed to make the bread hot and crisp. The toaster is a little apparatus intended to toast numerous sorts of bread items. Created in Scotland in 1893 and persistently created from that point forward, the most well-known family unit toasting machines are presently the pop-up toaster and the toaster broiler. Pop-up toasters make toast from bread in 1 to 3 minutes by utilizing warmth components.

Method: To check the performance of these pans, prepare 3 besan chillas on each type of pan by using equal quantity of oil and batter. Then compare and evaluate prepared dishes on 5 parameters i.e. Appearance, Texture, Aroma, Color and Taste by using 9-point hedonic scale.

Cookware is food preparation equipment, such as cooking pots and pans, used in kitchens. There are several different types of pots and pans- nonstick, ceramic, stainless steel, cast-iron and more. If you’re only going to buy one, we suggest a heavy-duty, try-ply or multi-clad stainless steel pan. They’re expensive, but they’ll last a lifetime with proper use.

Pressure cookers are pans made of Aluminum or stainless steel. They are available in different sizes. The pressure cooker was invented in the seventeenth century by the physicist Denis Papin, and works by expelling air from the vessel, and trapping the steam produced from the boiling liquid inside. This raises the internal pressures and permits higher cooking temperatures. This, together with high thermal heat transfer from the steam, cooks food far more quickly, often cooking in between half and a quarter the time for conventional boiling. After cooking, the steam pressure is lowered back to ambient atmospheric pressure, so that the vessel can be opened safely.

Today, we have spoons made of different sizes and materials such as metal, wood, plastic, ceramic or a combination of two or more materials. The most popular material is the stainless steel. Spoons are used primarily for eating liquid or semi-liquid foods, such as soup, stew or ice cream, and very small or powdery solid items which cannot be easily lifted with a fork, such as rice, sugar, cereals and green peas.

Appliances which help or assist in doing household work as cooking, cleaning and food preservation are known as equipments. A equipment also referred to as a domestic appliance or an electric appliance or a household appliance.

Home cooking is all about simple, tasty and healthy food brought from the kitchen to the dining table. But oftentimes, preparing the food can be timeconsuming and tedious. With the right list of basic kitchen tools, utensils and appliances, we can make cooking more enjoyable and a lot easier. These appliances can also motivate us to think of creative new recipes to delight our loved ones.

Work simplification is the conscious seeking of the simplest, easiest, and quickest method of doing work. It describes the making of daily tasks easier in order to reduce strain or to decrease the amount energy required to complete an activity. Work simplification research consists of making motion and time studies of the work as it is being done, analyzing the work methods, developing the easiest and most effective way to do the task and putting the new method into use. Time and energy are closely related and if these are blended properly the work of the housewife will be much simplified.

The level of motivation of an individual has a definite relation to the fatigue experienced while doing any work. When a person dislikes a task, motivation to do is low and fatigue sets in faster. Interest in job produces high motivation and prevents fatigue. Besides the way of carrying a task is of great concern if we want to maintain our right posture, in order that we do not have to face any musculoskeletal disorders.

The rate of consumption of time and energy in task completion is affected by the work area. The work area is composed of the height, available space of the work surface, the location of the equipment, materials, and supplies being used. The work surface should be at the optimum height for the position you assume in task completion. This means if you are standing, the surface height should be slightly below your waistline.

Anthropometry is the study of the measurement of the human body in terms of the dimensions of bone, muscle, and adipose (fat) tissue. It is a branch of anthropology dealing with measurements of human body to determine difference in groups and individuals. The word “anthropometry” is derived from the Greek word “anthropo” meaning “human” and the Greek word “metron” meaning “measure” (Ulajaszek, 1994).

The parent material to which a coating or plating is applied is known as the base material. The phrase base material is used to distinguish the overall part, numerous layers, and the original base material. Coating, electroplating, welding, and soldering all depend heavily on base materials.

There are 8 fundamental Ergonomic Principles for better work performance which help you identify ergonomic risk factors and maintain your stellar safety record.
• Maintain neutral posture
• Work in power zone
• Allow for movement and stretching
• Reduce excessive force
• Reduce excessive motion
• Minimize contact stress
• Reduce excessive vibration
• Provide adequate lighting

Physical ergonomics is concerned with human anatomical, anthropometric, physiological and biomechanical characteristics as they relate to physical activity. This is the ergonomics domain we are most concerned with in the workplace, and most of the content on this site is very much focused on workplace ergonomics.Physical ergonomic principles have been widely used in the design of both consumer and industrial products for optimizing performance and to preventing / treating work-related disorders by reducing the mechanisms behind mechanically induced acute and chronic musculoskeletal injuries / disorders.

The International Ergonomics Association (IEA) defines ergonomics or human factors as the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design to optimize human well-being and overall system performance.

The market research process is equally critical to rural marketing as to urban marketing because of two main reasons:

• The marketer has a limited understanding of the rural/urban consumer
• The marketer who is urban-oriented may need to find different ways to understand the decision variables in the urban market.

The communication which is the core of the Communication Mix plays an important role in promoting the product to the outside world and especially to the target market. In the marketing of rural products, application of latest, innovative and enhanced technologies is crucial for effective communication with urban consumers. This also helps in conveying the features of rural products. The adoption of the latest technologies ensures the economic well-being of the rural marketers by increasing the reach of the products and in creating awareness about the product. The technology helps in faster dissemination of the rural product information to the consumer.

There are many distribution networks which an organization may use depending upon the nature and usage of the product. Generally, there are two types of distribution networks which are being widely used the first is direct selling to the customer and the second is to have intermediaries in between which ensures that the product is available to the final consumer. In this indirect method the company is not in direct touch with the customer and this gap is filled by the middleman. The middleman not only provides the product to the customer but he also provides continuous feedback to the organization about the product and market demands. 

A marketing strategy of a business is the game plan of an organization for approaching its target market effectively. Marketing strategy is also used to target the prospective customer and converting them into loyal consumers for the brand and services being offered by the companies.

A marketing strategy is the building block of a marketing plan and consists of the value which the company wants to offer, its key message which the company wants to convey to the target market and other elements which are key in the area of marketing.