eChapters

Removal of entire plants or the economic parts after maturity from the field is called harvesting. Portion that is left behind on the field is known as stubble. The economic product may be grain, seed, leaf, root or entire plant.

Time of Harvesting

If the crop is harvested early, the produce contains high moisture and more immature grains. The yields will be low due to unfilled grains. It is very difficult to store the produce as shriveled grains with high moisture are highly prone to infestation by pest. The quality of the grain as well as germination percentage is also reduced. Late harvest results in shattering of grains, germination even before harvesting in rainy season and breakage during processing. Hence harvesting during correct time is very important.

Plants may be harvested at physiological maturity or harvest maturity. Plants are said to be in physiological maturity when the translocation of the photosynthates ceases to the economic part.

Harvesting is the act of removing crop from where it was growing and moving it to a more secure location for processing and storage. Some root crops and fruits trees can be left in the field or orchard and harvested as needed, but most crops reach a period of maximum quality that is they ripen or mature and will deteriorate if left exposed to the elements. While the major factor determining the time of harvest is the maturity of the crops and other factors such as weather, availability of harvest equipments, packing, drying, transport and storage facilities.

Economic and marketing issues are often even more important to consider when to harvest commodity. Before harvesting of crop, grower must be sure about demand of the produce.

Harvesting the crop at optimum maturity is critical for reaping the benefits of season long efforts on crop production. After final decision on crop maturity, care must be taken to avoid losses during harvest, threshing, transport and storage. Processing is equally important to keep the produce in good condition for realizing good price.

Crop maturity: There are different types of maturity namely physiological maturity, harvest maturity and storage maturity.

Physiological maturity: It is the stage of development in the life cycle of plant when the plant reaches maximum dry weight. At this stage any further increase in inputs does not produce any gain in yield. There is cessation in growth and grain filling at this stage. Grain at this stage has 40 per cent moisture and 90 per cent produce is matured and this remaining 10 per cent still immature. So farmers should harvest at stage to get maximum benefit.

In the vast array of terrestrial organisms, the human species is commonly regarded as possessing a distinctive and elevated status owing to its faculty for moral discernment. This faculty encompasses the capacity to adapt to diverse environmental conditions, adeptly navigate complex circumstances, demonstrate comprehension, exercise authoritative control, and effectively tackle arduous tasks through the assimilation and judicious application of prior experiences. Termed intelligence, this quality is observed to manifest across a spectrum of degrees among individuals.

Social psychology, as previously elucidated, endeavors to delineate the nature of social behavior. Social behavior encompasses four fundamental types of interactions

i) When individuals encounter one another, mutual reactions occur. Each individual influences the other, and reciprocally, they are influenced by each other’s presence.

ii) Individuals may elicit responses from groups, such as when an extension worker interacts with a gathering of farmers.

iii) Conversely, groups collectively respond to individual members, as exemplified by a group’s reaction to its leader during a meeting. iv) Interactions extend to intergroup dynamics, where one group of individuals reacts to another group.

There are specific hazards associated with equipment, operation or a particular section. Such possible hazards and their preventive measures are discussed below.
I. Milk Reception Dock
    1.    Where the top of a vat, into which a 40 litre can of milk is to be dumped, is higher than the milk can, two men should lift and empty the can.
    2.    Where steam jet method of can washing is used, to avoid burning, employees would be furnished with protective equipment, including rubber boots and long aprons
    3.    Cans should be stacked in areas away from frequently used passage ways
    4.    Cans should not be stacked so high that they may fall and injure someone

Food packaging serves to protect products throughout their journey from production to consumption. However, packaging is often exposed to a variety of hazards during transportation and storage that can compromise its effectiveness and, ultimately, the quality and safety of the food inside. Understanding these hazards is essential for designing packaging solutions that can withstand the physical, environmental, and atmospheric challenges encountered along the supply chain. This chapter examines the types of hazards that affect food packaging during transportation and storage, focusing on the ways in which these factors impact packaging integrity, food quality, and consumer safety. By exploring mechanical hazards, environmental influences, and atmospheric interactions, this chapter provides insights into the crucial role that resilient packaging plays in safeguarding food from production to point-of-sale.

Abstract

Health-conscious consumers are increasingly seeking functional foods in an effort to control their own health and well-being. The field of functional foods, however, is in its infancy. Claims about health benefits of functional foods must be based on sound scientific criteria. A number of factors complicate the establishment of a strong scientific foundation. These factors include the complexity of the food substance, effects on the food, compensatory metabolic changes that may occur with dietary changes, and, lack of surrogate markers of disease development. Additional research is necessary to substantiate the potential health benefits of those foods for which the diet-health relationships are not sufficiently scientifically validated. Research into functional foods will not advance public health unless the benefits of the foods are effectively communicated to the consumer. Finally, those foods whose health benefits are supported by sufficient scientific substantiation have the potential to be an increasingly important component of a healthy lifestyle and to be beneficial to the public and the food industry. Mounting evidence supports the observation that functional foods containing physiologically-active components, either from plant or animal sources, may enhance health. It should be stressed, however, that functional foods are not a magic bullet or universal panacea for poor health habits. There are no “good” or “bad” foods, but there are good or bad diets. Emphasis must be placed on over-all dietary pattern, which follows the current Dietary Guidelines, and is plant-based, high in fiber, low in animal fat, and contains 5-9 servings of fruits and vegetables per day.

Heat desiccated products represent khoa and khoa-based sweets, rabri, basundi, etc. These are important traditional dairy products. Traditional dairy products and a great assortment of sweets is an integral part of Indian heritage. These products are endowed with enormous value and enjoy tremendous mass appeal. Of great social, religious, cultural and economic importance these products have been developed over a long period of culinary skills and carry with them, the age-old wisdom and experience. Traditional dairy products have always played a pivotal role in preservation of precious milk nutrients and promotion of its consumption among masses. The increased availability of milk during the flush season coupled with lack of facilities to keep liquid milk fresh during transit from rural production areas to urban market has led to the conversion of milk into variety of traditional products. In addition to preservation of milk solids for longer duration, manufacture of traditional dairy products adds value to milk and also provides tremendous employment opportunity. It is estimated that about 50% of milk produced in India is converted into a variety of traditional products.

Traditional dairy products represent the most prolific segment of Indian dairy industry. These products not only have an established market in India but also have a great export potential because of strong presence of Indian diaspora in many parts of the world. In view of the growing awareness towards the safety aspects of milk-based sweets in India, the consumer shall prefer to buy these products from the organized sector. Despite the widespread popularity and acceptability of traditional milk products in the Indian market, the organized sector has so far not been able to tap into this market potential for many reasons such as lack of published literature on their technology, inadequacy of appropriate technologies for their commercial exploitation, inadequacy of appropriate packaging materials and labeling to take care of new pattern in consumer demand, low keeping quality and a lack of quality assurance systems.

Abstract

The objective of this chapter is to provide an overview of heat pump dryer (HPD) and recent developments in its applications for drying of agricultural and food products. The basics of heat pump dryer, classification, operating principle, configuration and control system have been presented for better understanding. Many researchers have concluded that HPDs use energy more efficiently than electrical dryers. The heat pump dryer is best suited for drying high value commodities such as fruits, vegetables, spices, condiments, herbs, medicinal and aromatic plants at near ambient temperature for producing better quality dehydrated product.

3.1 Introduction

The subject of heat transfer is firmly grounded in the sciences of thermodynamics and fluid mechanics. It has become exceedingly important for engineers to possess a clear understanding of the principles of heat transfer and its application to a large number of problems. In view of process engineering, the knowledge of heat transfer and its application is most important, because heat transfer is one of the basic unit operations in the agricultural processing activities. The design of process equipments, refrigerators, boilers or type of heat exchangers, thermal treatment of food grains, cooling of perishables, pasteurizations, sterilizations, freezing of milk and fruit juices and a large number of similar applications involve consideration of heat transfer rates. There may be other situations where heat is being generated during a certain operation, and may be detrimental to the equipment and the food product. In such cases we are often faced with the task of removing the undesirable amount of heat as far as possible.

1.    Heat transfer by conduction is given by

(a) Boyle’s law

(b) Stefan’s law

(c) Fourier’s law

(d) Charles’ law

2.    Heat flow per hour is proportional to change in

(a) Area

(b) Vapour pressure

(c) Mass

(d) Temperature

Synonyms : Pasteurellosis, shipping fever, Stockyardis disease, Stockyardis pneumonia, Barbone disease

Hemorrhagic septicaemia is a particular form of pasteurellosis caused by Pasteurella multocida and manifested by an acute and highly fatal septicaemia mainly in  cattle and water buffaloes. The disease includes pneumonic pasteurellosis (shipping or transport fever), a disease caused mainly by P. haemolytica, although various serotypes of P. multocida are occasionally involved. Although the morbidity of pneumonic pasteurellosis of cattle can be high, the mortality rate is much less than that of hemorrhagic septicemia.

1. Herbs and Spices
       
    1.    International Standards Organization (ISO) defines spices and condiments as: Vegetable products or mixtures thereof, free from extraneous matter, used for flavouring, seasoning and imparting aroma in foods.

    2.    Rosengarten describes a spice as a product which enriches or alters the quality of a thing, for example altering the taste of a food to give it zest or pungency; a piquant or lasting flavouring; or a relish. The term ‘spice’ is thus used to cover the use of spices, herbs and certain aromatic vegetables to impart odour and flavour to foods.

    3.    Herbs may be defined as the dried leaves of aromatic plants used to impart flavour and odour to foods with, sometimes, the addition of colour. The leaves are commonly traded separately from the plant stems and leaf stalks.

This alternative pathway for glucose oxidation has enzymes in the cytosol through which glucose is degraded to carbon dioxide. It is also called a shunt because carbon atoms from glucose 6-phosphate take a long route before they proceed down the EMP or glycolytic pathway. This pathway is anabolic in nature as it produces many intermediates. In this pathway, two NADPH are generated from one glucose 6-phosphate molecule. No ATP is generated or consumed.
Overall, this pathway needs three glucose-6-phosphate molecules to complete all the reactions. Therefore, one cycle run produces 2 mol of fructose-6- phosphate, 1 mol of glyceraldehyde-3-phosphate, and 3 mol of carbon dioxide from 3 mol of glucose-6-phosphate with the reduction of 6 mol of NADP+ to NADPH.
Overall reactions of the HMP pathway are as follows:
3 Glucose-6-P + 6 NADP+→ 3 ribulose-5-P + 3 CO2 + 6 NADPH
3 Ribulose-5-P → 2 xylulose-5-P + Ribose-5-P
2 Xylulose-5-P + Ribose-5-P → 2 fructose-6-P + Glyceraldehyde-3-P

The art in producing high-boiled sweets with satisfactory shelf life is manufacturing boilings which contain the minimum amount of residual moisture and a satisfactory balance between cane or beet sugar, and glucose syrup or invert sugar syrup. The main physical change during the storage of high-boiled sweets is the formation of small crystals in the confection, usually referred to as graining, due to recrystallisation of sucrose. These spoil the appearance and cause an unpleasant roughness on the tongue.

For high-boiled sweets it is impossible, using the normal proportions of cane or beet sugar (sucrose) and glucose syrup, to obtain a product of 97% solids content, which is not supersaturated with respect to sucrose.

In practice, however, one-and-a-half parts of sugar (sucrose) to one part of forty-two DE glucose syrup will produce a high-boiled sweet stable against graining.

High Humidity Hot Air Impingement Blanching (HHAIB) is a modern blanching technology developed to overcome several limitations associated with conventional blanching. This chapter introduces HHAIB as a pretreatment used before drying, freezing, canning and frying, particularly for fruits and vegetables. It explains the underlying principle of high-humidity hot-air impingement and its effects on heat and mass transfer. The chapter discusses applications in pre-dehydration treatment, colour preservation, texture and structural integrity and enzyme inactivation. Comparative analysis with conventional blanching methods highlights its potential advantages in drying efficiency, quality retention and energy utilization, making HHAIB an important emerging technology for modern food processing.

1. Introduction

Fruit products have their unique identities having large content of micronutrients, polyphenols, vitamins, flavonoids and other nutritional compounds. Characteristic appearance and flavors distinguish among various fruit based products like juice, puree, jam, jelly, squash and other several varieties. Main concern of this fruit processing industry is the stability of the products throughout the post processing storage. Thermal treatment as mean of preservation of these products is the common process implemented so far. It ensures the safety of the product but lacks in retaining the nutritional intact that like of fresh fruit. Today’s consumer demand for minimally processed fruit products and “natural” fruit products tend to think of alternative thermal processing.

High pressure processing (HPP), a relatively new concept compared to conventional thermal processing, also sometimes known as high hydrostatic pressure (HHP), or ultra high pressure (UHP) processing, is a non-thermal food processing method that subjects liquid or solid foods, with or without packaging, to pressures ranging between 50 and 1000 MPa. HPP has already been established itself as an alternative to thermal processing. In food processing it is of great interest due to its ability to inactivate food borne microorganisms and enzymes, at low temperature, without the need for chemical preservatives and it is less detrimental than thermal processes to low molecular weight food compounds such as flavoring agents, pigments, vitamins, etc., as covalent bonds are not affected by pressure. Pressure-treated foods have sensory properties similar to fresh products, which is a major advantage in fruit processing as it matches consumer demand for healthy, nutritious and ‘‘natural’’ products. HPP of fruit products offers the chance of producing food of high quality, greater safety and increased shelf life (Hayashi 1989; Gould 1996; Butz and Tauscher 1998).

Introduction

Vegetables are one of the potential crops in meeting the food requirements and improving the nutritional status of our people. They play a vital role in crop diversification, employment generation, and nutritional security and in improving the economic conditions of farmers.

Our country has made a tremendous progress in vegetable production and ranked as second largest producers of vegetables in the world with a total production of more than 125 million tons per annum. Our estimated demand is about 225 million tons by 2020 AD. This target can be achieved through use of improved vegetable varieties, hybrids and production technologies even with diminishing land and water resources.

In Indian vegetable scenario, IARI has contributed significantly by developing more than 168 improved varieties and 24 hybrids in different vegetables. Apart from high yielding, many of these varieties/F₁ hybrids are resistant to biotic and abitic stresses and also suitable for processing, value addition and export. Besides developing large number of improved varieties and F₁ hybrids of vegetables, IARI has developed/standardized improved hi-tech vegetable nursery and off-season production technologies which require commercialization by the entrepreneurs as these can bring quantum improvement

High Yielding Variety Programme (HYVP)

High Yielding Variety Programme (HYVP) was launched in 1966, which helped the country in attaining self-sufficiency in food. The technological development did not remain confined to the introduction of high yielding crop varieties alone. These were combined with the application of high analysis and balanced fertilizer, irrigation, plant protection, improved implements etc. which made a ‘Green Revolution’possible in the country.

Introduction

It has been proved that libraries play a crucial role in education. Libraries have been collecting, preserving, and organizing knowledge since time immemorial. In the age of virtual information, libraries have been reinventing themselves as accessible and engaging learning spaces. Libraries existed in India during the ancient and medieval periods. The library is the primary requirement of the university. University libraries have a paramount role in developing university education in the country. The present chapter highlights the historical development of libraries, committees, and commissions on university libraries in India.