eChapters

Dehydration (or drying) is defined as ‘the application of heat under controlled conditions to remove the majority of the water normally present in a food. The main purpose of dehydration is to extend the shelf life of foods by a reduction in water activity. This inhibits microbial growth and enzyme activity, but the processing temperature is usually insufficient to cause their inactivation. Therefore any increase in moisture content during storage, for example due to faulty packaging, will result in rapid spoilage.

Introduction
Drying is probably the oldest method of food preservation used for agricultural crops, including food grains, oilseeds, spices, as well as fruit and vegetables. Drying refers to the removal of moisture content from the food to a level at which the activities of food spoilage micro-organisms are inhibited. Therefore, the reduction in water activity of the food as a result of moisture removal is themain principle of preservation by drying. Two commonly used terms for dried foods include low-moisture foods and intermediate moisture foods (IMF). Dried foods or low-moisture foods generally do not contain more than 25% moisture and have a water activity (aw) in the range of 0 to 0.6. Intermediate moisture (IMF) foods on the other hand contain 15- 50% moisture with a water activity (aw) of 0.60 -0.85. Dried grapes (raisins and munacca), apricots, dates, Morchella (Guchhi), bael, chilli, figs, etc. are commercial products prepared by using drying. However, the temperature used for drying is usually insufficient to cause the killing of microorganisms and enzymes, therefore any increase in moisture content during storage due to faulty packaging can also spoil the product. Thus, greater care is required for the packaging and storage of dried products.

Abstract

Food proteins are among the commonly used ingredients by food manufacturers to produce different products with desired characteristics. Due to several nutritional and functional properties, proteins have different functions in various food products in addition to their role in metabolic system of the human body. Dilute or concentrated solutions of pure proteins or unprocessed food products which are rich in protein are very sensitive to deterioration or degradation by microorganisms and thus have short shelf life at ambient temperatures due to their highly moist structure and high protein content. Drying is one of the best methods that can guarantee preservation, a longer shelf life, chemical or thermal stabilization and resistance against other stresses. A full understanding of stresses encountered during drying is needed to choose an appropriate drying process and to optimize this process for maximum product quality. A number of methods have been used by various researchers to dry protein-containing foods. Among these methods, freeze drying and spray drying are the most common techniques. Sun drying, convective hot air drying, vacuum drying, heat pump drying, radio frequency drying as well as combined or hybrid drying methods with two or more of the drying methods have also been developed.

Removal of water from the food by non-conventional energy source like sunlight, wind, and a smoky fire. Drying (dehydrating) food is one of the oldest and easiest methods of food preservation.

Dehydration

Dehydration is the process of removing water or moisture from a food product under controlled condition like temperature, relative humidity, air flow, etc.

Principles of Drying and Dehydration

Drying removes the moisture from the food so that bacteria, yeasts and moulds cannot grow and spoil the food. It also slows down the action of enzymes, but does not inactivate them. Dried food items can be kept almost indefinitely, as long as they are not rehydrated.

1. Introduction

Drying is a thermo physical and physicochemical process, which involves removal of excess water from a solid, semi-solid or liquid food material by evaporating it into vapour phase on applying heat, to reduce growth of microorganism or to completely eliminate their growth. Hence, reducing the water activity increases shelf life of food products. Drying medium for carrying evaporated moisture can be air or steam. Benefits of drying include increase in shelf life, easy to transport, handle food material and reduce packaging cost as it reduces bulk weight. 

Introduction

Durum or macaroni wheat (T. turgidum var. durum) is an important crop used chiefly for the production of pasta in Western Europe and North America, and two layered bread, single layered bread, burghul, couscous, pasta, frek and feed in other parts of the world (Table 1). In North Africa and the Middle East, durum is also used for producing flat breads. On a global basis only a small amount of durum wheat is used for baking of pan-style and hearth-style bread. Also, durum wheat for baking is often used in blends with common wheat. In India, durum occupies approximately 2.0 mha area and production is estimated to be around 2.5-3.0 million tones annually amounting to 3-4% of the total wheat production. The consumption of pasta is increasing at the rate of around 5% annually and currently it is estimated to be around 10 Lakh tones. The demand for pasta products may increase further due to increasing population and improving standard of living.

E numbers: Each food additive used in the food industry has been given a specific number code for their identification. These numbers are called as E numbers. These E numbers are used within the European Union. The word prefix “E” stands for Europe. They are commonly used on the food label through out the European Union. These are not used in Australia and New Zealand. The different food additives are given different E numbers depending upon the type of food additive like E100-E199 (food colours), E200-E299 (preservative), E300-E399 (antioxidants), E400-E499 (thickners, stabilizers, emulsifier), E500- E599 (pH regulator, anticaking agent), E600- E699 (flavour enhancers), E700-E799 (antibiotics), E900-E999 (miscellaneous like waxes, synthetic glazes, packaging gases, sweetners, foaming agents), and E1000-E1099 (additional chemicals).

Earling: The young lamb of one to two years’ age is called earling or yearling.

Ebullioscopic constant: The boiling point elevation is expressed by Dtb = Km, where m is molality of the solution and K is ebullioscopic constant. It is also called as molal boiling point elevation constant. The unit of an ebullioscopic constant is K Kg mol-1.

Early childhood care and education provides the foundation for children’s physical, cognitive, linguistic, emotional, social and creative development. This chapter examines the meaning, objectives and importance of early childhood education, together with the characteristics and developmental needs of young children. It covers preschool programmes, curriculum planning, play-based learning, classroom organization, teaching-learning materials, daily schedules, evaluation and the professional qualities of early childhood educators. Questions address the contributions of major educational thinkers and approaches, including Montessori and other child-centred practices. National policies, Integrated Child Development Services, Anganwadi programmes and contemporary challenges are also included, supporting effective preparation for academic and professional examinations.

Much of the post-harvest losses of fruits and vegetables in developing countries is due to the lack of proper storage facilities. While refrigerated cool stores are the best method of preserving fruits and vegetables they are expensive to buy and run. Consequently, in developing countries there is an interest in simple low-cost alternatives, many of which depend on evaporative cooling which is simple and does not require any external power supply. India is the second largest producer of fruits and vegetables in the world after Brazil and China respectively. Storage of fresh horticultural produce after harvest is one of the most pressing problems of a tropical country like India. India’s total fruits and vegetables production is lost during harvest, storage, grading, transport, packaging and distribution in a year which reduces the growers share. Due to their highly perishable nature, about 20-40% of total fruit and vegetable production go waste during various steps of the post-harvest chain, smooth transport and insufficient cool storage space/ facility at farmer’s level and high cost of refrigerated storage so further enhances loss of fruits and vegetables. Temperature and humidity play major role in storage of fruits and vegetables Temperature can be controlled by using energy consuming methods such as air-cooling, hydro-cooling, vacuum-cooling, chilling, ice cooling, freezing, etc.

Pineapple is an important tropical fruit crop of India introduced by Portuguese from Southern Brazil early in the 16th century. It is a versatile fruit acting as a rich source of nutrients in many favourite recipes. In addition, it is an excellent source of vitamins, minerals, and antioxidants,highlighting its role as anti-inflammatory, digestion, and immunity support.It resembles epiphytes where roots are sensitive to poor soil aeration (Joy and Sindhu, 2012). In the present day, the demand for pineapple is increasing gradually in different parts of the country. However, insect-pests infestation turns out to be one of the major impediments in its quantum of production.

Pineapple is infested by several insect pests like mealy bug, scale insect, thrips, fruit borer, white grubs, bud moths, midges, fruit flies, termites etc. during its entire crop duration. However, Mealy bugs appeared as the key pest of pineapple while otherslike scale insects, thrips and fruit borer could cause economic damage to the crop only under favourable environment. Therefore, emphasis must be given for development of suitableecofriendly management techniques by proper prophylactic (cultural, mechanical, biological etc.) and protective measures to reduce the insect-pest population below the economic damage through proper monitoring and regular survey of the crop field.Thus, this chapter emphasizes on the important insect-pests infesting Pineapple along with their appropriate management options.

4.1 INTRODUCTION

India enjoys a wide range of climates and agro-meteorological zones which are suitable for growing various kinds of horticultural crops like fruits, vegetables, f lowers, spices and condiments, plantation crops, and medicinal and aromatic plants.

India is the largest producer, consumer and exporter of spices in the world. India stands second both in production of fruits and vegetables next to China. China contributes 21.2% in the world fruit production whereas India produces 12.6%. When we think of vegetables, China produces 49.5% and India produces 14.09%. India is the largest producer of Mango, Banana, Papaya, Coconut, Arecanut, and Cashewnut in the world. In the country, Andhra Pradesh (13.0%) is the leading state in fruit production followed by Maharashtra (11.2%). In case of vegetables, Uttar Pradesh stands first occupying 15.1% share followed by West Bengal and Madhya Pradesh in the range of 14.6% and 10% respectively. In cut flower production West Bengal ranks first.

Total horticultural production for the year 2017–18 was 311.71 million tonnes from cropping area of 25.43 million hectares of land and an estimated production for the crop year 2018-19 is 314.87 million tonnes from an area of 25.6 million hectares.

Model Project for Setting Up 10 & 20 Cow Dairy Farm (Indicative)

    ·    The models are only indicative and in no way designed to provide exact economics. Following guidelines may be used by the interested persons to work out the details of their project, depending upon the local market and conditions.

    ·    An interactive module considering the land availability for fodder cultivation, willingness to opt for silage bunkers, type of chaff cutter (manual or machine operated), milking machine, mister set, etc. is under preparation.

    ·    The proposed interactive module would require preference for set of inputs and intended herd size and accordingly generate output outlining the estimated investment, cost and return.

Successful cultivation of a crop is governed by various factors including the edaphic and climatic conditions of the region, owing to which the crop responds in terms of quality and productivity. Pineapple (Ananas comosus L. Merr.) is one of the major crops cultivated across the tropical and sub tropical countries worldwide. Adaptability of the crop under different climatic conditions, topography, temperature, photo-periodicity, rainfall and edaphic conditions will be discussed in this chapter.

Climatic zone: Pineapple is a tropical fruit crop though it can thrive well in the sub-tropical condition as well.Pineapple grows well inwarm and humid climate ranging from mild coastal climate up to an altitude of about 1000 meters, provided the area is free from frost (Singh, 2014).Pineapple is commercially grown over a wide range of latitudes from 30° N (Assam, India) in the northern hemisphere to 33°S in the Southern hemisphere (South Africa) (Malezieux et al., 2003; Purseglove, 1972).

Topography: Pineapples are easy to cultivatesince they thrive naturally in a variety of places with different elevation, especially in tropical countries (Kaudo, 2014). Though the plant survives at different altitude, the fruit quality and size may alter at different elevation. When pineapple is grown at altitudes greater than 1000 m, smaller fruits with elevated tartness with less attractive pulp colour (Purseglove, 1968).Moreover, fruit flavour can also vary, wherein the fruit tends to bemore acidic and sour when cultivated above 1800 meters, but will be sweet and tasty under 1350 meters (Kaudo, 2014).

Temperature: On an average, the temperatures required for growing pineapples range within 18-30°C (Kaudo, 2014) andmore specifically at 23 - 24 ° C (Neild and Boshell, 1976; Py et al., 1987). The optimum day and night temperatures for pineapple were reported to be about 30°C and 20 °C, respectively (Neild and Boshell, 1976). Bartholomew and Kadzimin (1977), however have reported that leaves and roots grow best at 32°C and 29°C respectively and the growth practically ceases below 20°C and above 36°C. Py and Tisuucau (1965) have observed 25°C to be optimal for fruit ripening.

10.1. Introduction

When it comes to packaging, plastics are still popular because of durability, versatility, economic production, and enhanced mechanical properties. However, with growing concerns about the impact of plastics-based packaging on the environment, edible and biodegradable packaging were introduced. The application of edible and biodegradable packaging promotes renewable resources, which greatly reduces environmental concerns and fulfil the packaging requirements. The sources employed to develop edible and biodegradable packaging are mainly plant-based biopolymers like cellulose, proteins, starch, and lipid. Moreover, the properties of the packaging material are decided by the proportions of these biopolymers. Hence, selecting a food commodity to be package is equally important as selecting suitable resources for the development of edible and biodegradable packaging.

Introduction

Fruits and vegetables are essential constituents of daily diet and are highly demanded in the recent years from most of the population. They are reservoir of vitamins, essential minerals, antioxidants, bio-flavonoids, dietary fibres and f lavour compounds which fall easily victim to abiotic and biotic adversities. Fruits and vegetables are highly perishable and during the post- harvest, there are considerable losses due to microbes, insects, respiration and transpiration.

The important quality factors of fresh produce contributing to the marketability are texture, colour, appearance, flavour, nutritional value and microbial safety. These quality factors are measured by plant variety, ripening stage, maturity stage pre-harvest and post-harvest conditions. The Post-harvest losses of fruits and vegetables are a serious problem because it rapidly deteriorates them during handling, transport and storage. Edible coating over fruits and vegetables are used to improve their quality and shelf life.

Mushrooms are good as nutritious food for all ages and under all conditions of health. The mushroom is a fleshy, space-bearing organ of non-green edible fungi. Its fleshy nature of mushroom is responsible for its main attraction to human being as a source of food. Like other fruit and vegetables, mushrooms are soft textured and highly perishable in nature. Mushroom are potential sources of nutrients. They can convert nutritionally valueless substances into high fat and protein food. Mushroom proteins are comparable to muscle protein in nutritive value. Being a good source of vitamins and proteins it is considered be a distinct food. The digestibility of protein in these is 72-83%. Mushrooms are edible fungi; assume considerable importance in human diet as they are good source of non starchy carbohydrate, dietary fibre, minerals and vitamins-B and essential amino acids. Mushrooms are popular their delicacy and flavour rather that food value. However, it is now a well-established fact that they are excellent sources of vitamins and minerals (Vijaya Khader, 1988). The vitamins in mushroom are well retained during cooking, canning, and dehydration. The White button mushrooms (Agaricus bisporus), Shiitake mushroom (Lentinus edodes), Pleurotus species (Pleurotus osteatus, P. flabellatus, P. sajor caju etc.), Paddy straw mushrooms (Volvariella volvacea), Winter mushrooms (Flammulina velutipis), Jew’s ear mushrooms (Auricularia polytricha) are commercially cultivated species of mushroom. In India, mainly three species viz., white button, oyster or dhingari and paddy straw mushrooms are commercially cultivated at large scale.

Abstract

Egg is a nutrient dense food, containing high quality proteins and a wide range of vitamins, minerals, trace elements, PUFA, MUFA etc. Whole egg slices were prepared by boiling in water technique for a predetermined time i.e. 15 min. The egg slices were prepared with spice extract at different levels of 2%, 5%, 7% and 10%, out of which 5% was found acceptable by sensory evaluation. The egg slices with 5% spice extract were then subjected to frying in different oils such as mustard oil, rice bran oil, sunflower oil and soya bean oil. Among all of the fried egg slices and control (without any spice extract and frying), on sensory evaluation, fried egg slices with mustard oil was most preferred. Texture analysis results shows that hardness was increased on frying and highest in fried egg slices with rice bran oil. Also the values for other TPA component viz. adhesiveness, cohesiveness, gumminess and chewiness were increased on frying as compared with control. Among the fried egg slices, highest values for adhesiveness, cohesiveness, gumminess was observed in egg slices with rice bran oil. However, chewiness of fried egg slices with sunflower oil was highest. It can be concluded from present study that the egg slices fried in mustard oil was organoleptically acceptable with good textural properties.

Introduction Pulses are a vital source of protein (20-25%) in comparison to cereal proteins (10-12%); which cater to the most vegetarian population (Venkidasamy et al., 2019) and other countries which are scarcity of animal protein availability. In the category of pulse crop, chickpea is considered the second utmost significant crop, which is grown in almost 35 countries globally. Chickpea mainly contains carbohydrates, protein, minerals, vitamins, dietary fiber, folate, β-carotene and health-promoting fatty acids (Badshah et al., 2003; Tosh & Yada, 2010) and consuming these grains will repeatedly help in lowering the risk of chronic diseases (Jukanti, Gaur, Gowda, & Chibbar, 2012). Ozone is often regarded as a potent oxidant capable of penetrating the grain (Tiwari et al., 2010), and it can control the bio-agents such as insects, molds, and mycotoxins (Wang et al., 2016). Due to the fact that ozone gas is unstable, it convert back into oxygen without leaving any residues in short time (McClurkin, & Maier, 2010), so, it can be used as a fumigant without leaving any residue. The Food and Drug Administration (FAO) has approved it for fumigating grains, fruits, and vegetables.

Vegetable oils and fats play a very important role in our diet. They provide essential fatty acids which are precursors of important hormones such as prostaglandins. They control many physiological factors such as blood pressure, cholesterol and reproductive system [1]. Coconut oil is a popular vegetable oil obtained from kernel of fruit coconut (Cocos nucifera). It is liquid at room temperature and bland in taste. Coconut oil is extensively used in cooking purpose in coastal tropical regions although it has been used in abundance for its medicinal properties.

Introdoction

Tillage is a prime activity carried out prior to sowing of a crop with an objective to bring the soil to a favorable tilth to provide a congenial environment for crop growth and yield. The operation of ploughing once and left out for a few weeks followed by a broadcasting of rice seeds by hand and then ploughing and raking together at the same time once gave highly significant rice grain yield (Srisa-ard, 2008). Adoption of the “Sawah” system (bunded, puddle and leveled) in inland valleys in Ghana lead to significant improvement in soil and water management; enhancement in rice grain yield and made sustainable production. Even the practice of Sawah system of cultivation increased local rice production by over 300% because of the mechanisms with intrinsic resistance to erosion (better water control and nutrient management (Buri et al., 2012).

Abstract

Garden peas of two cultivars (Pb-87 and Pb-88) were procured. Pods were shelled manually, grains were blanched and dehydrated. Other lot of peas of both the varieties was allowed to mature on the plant till the plant foliage dried up, harvested, pods were dried in shade for few days, shelled manually and grains were further dried in shade. Grits were prepared by grinding rice and pea (dhal) in a laboratory grinder to pass through 20 mesh sieve. Blends were prepared by mixing rice and pea grits in the ratio of 100:0, 85:15 and 70:30. The blends were subjected to extrusion cooking using Brabender single screw extruder. The extruder die pressure, specific energy consumption (SEC), expansion ratio, density, water absorption index (WAI), water solubility index (WSI) and organoleptic characteristics were studied. Addition of pea grits resulted in a decrease in die pressure in all the blends. Addition of pea grits showed a significant effect on SEC. A decrease in expansion with increase in the level of pea grits in blend was observed. The extrudates having lower expansion showed higher density values and vice versa. Effect of replacement of rice grits with pea grits on WAI was found to be significant. Level of pea grits significantly affected the WSI. Incorporation of pea grits in the rice grits significantly affected the sensory characteristics. Replacement of rice grits with mechanically dried pea grits resulted in deterioration of acceptability score, but addition of field dried pea grits improved the same.

Introduction In latest years, there has been an upsurge in customer situation over using artificial colorants in foods, especially on the subject of healthiness and safety issues (Amchova, Kotolova, & Ruda-Kucerova, 2015). Dietary colorants have been banned or regulated by the European Food Safety Authority (EFSA) and various other national authorities throughout the world because to their confirmed or suspected link to enhanced cancer progression or adverse reactions. For the same motives, various pigments are being investigated and are most effective provisionally authorized at this time. Consequently, the use of natural additives in food production is becoming increasingly popular among food companies (Schwartz, Joachim, & Giusti, 2007). Red C-PE is the most extensively used colour and has various application in food, cosmetics, and pharmaceutical industries; however, because they are rare in nature, they must be synthesized. Therefore, the food sector is expressing an increasing interest in the finding, application, and stabilizing of natural red colorants, which are currently in high demand. A growing number of commercial companies are turning to cyanobacteria for colour extraction, including Spirulina sp. for the extraction of Phycoerythrin, Haematococcus sp. for the extraction of astaxanthin pigments, and Dunaliella sp. for the extraction of beta-carotene pigments (Sharma et al., 2021).

Abstract

Noodles are widely consumed throughout the world and their global consumption is second only to bread. In the study, response of reducing agents (cysteine hydrochloride and sodium metabisulphite) and oxidizing agents (potassium bromate and benzoyl peroxide) at 10 and 20 ppm levels on the farinographic and amylographic curve characteristics as well as on the noodle making properties of durum and commercial wheat semolina were investigated according to the AACC (1990) procedure. The farinographic curve characteristics revealed that water absorption was enhanced with increasing levels of reducing agents but decreased with addition of oxidizing agents. However there was no significant change in Dough Development Time in case of durum semolina on addition of reducing agents, but commercial semolina recorded significant changes at 20 ppm level of reducing agent. The best reducing agent for durum and commercial semolina was thus sodium metabisulphite and cysteine hydrochloride respectively. Addition of oxidizing agent potassium bromate at 20 ppm level enhanced stability and was thus chosen as the best oxidizing agent for durum semolina and benzoyl peroxide for commercial semolina. Addition of reducing and oxidizing agents improved yield, appearance, elasticity and extensibility characteristics of instant fresh noodles. The best levels were used in the preparation of noodles on the Italian extruder (NAMAD).

Abstract

Paddy seeds of variety PR - 116 were obtained from the PAU seed farm. These seeds were cleaned with commonly used seed processing equipment. Samples were divided into 2 parts. One part was kept as such for taking the observations of feed (control) and the remaining part was passed through specific gravity separator for its refinement. The various fractions obtained were recovery, middlings, and rejections. These graded fractions as well as the feed were packed in 5-kg cloth bags and stored under ambient conditions. Different quality parameters viz. moisture content, physical purity, thousand grain weight, percent germination, root/shoot length, vigour index and speed of germination were recorded at 30 days interval. The physical purity, thousand grain weight, percent germination, root length, shoot length and vigour index were found to be higher in recovery and minimum for rejections while moisture content was highest for rejection as compared to all other fractions. Germination, root/ shoot length, vigour index and speed of germination increased with the duration of storage while moisture content, thousand-grain weight and physical purity followed a reversed trend. Compared to feed, the recovery had higher quality attributes after 4 months of storage viz. moisture content decreased by 0.3%; physical purity increased by 0.67%; thousand grain weight increased by 2.97 gm/ thousand grain, germination increased by 8%; vigour index increased by 481.1 points; speed of germination increased by 3.2 seedlings per day. The grading resulted in improvement in overall quality of sunflower seed.

Most of the starch sources are cereals (40 to 90%), tubers (65 to 85%), roots (30 to 70%), legumes (25 to 50%) which contain nearly 70% of starch on dry basis (Santana & Meireles, 2014). Major application of starch is seen in food production, where it is used as a thickening agent, for stabilization, adsorption, gelling, for binding aromatic compounds and as a film forming agent as well (Subaric et al., 2007). About 0.8-3.2 tons of CO2 per ton of plastic can be saved by using starch-based plastics (Patel 1999).

Abstract

Re-constituted rice-premixes made by extrusion, has been successfully formulated for the fortification of market rice with vitamin A (retinyl palmitate and betacarotene) and iron. The statistics of vitamin A deficiency (VAD) and Iron deficiency anaemia (IDA) are alarming in the developing world, particularly in India. In fact, India is second largest producer as well as consumer of rice in the world, so fortification of rice with vitamin A and iron seems to be a successful solution to reduce the VAD and IDA in India. In order to design the final formulation, eight formulations containing target micronutrient profile were tested for vitamin A (both retinyl palmitate and beta-carotene) and iron retention for a period of six months under ambient (24-26 ⁰C) and elevated temperature (40 ⁰C) conditions. Nonsignificant iron loss was observed during six months of storage time under both ambient and elevated conditions. The higher retention of retinyl palmitate and beta-carotene was observed in formulation 5 and 8 respectively. In F5, the retention of retinyl palmitate was 73% and 66% and in F8, retention of beta carotene was 70% and 63% under ambient and elevated temperature conditions respectively after six months of storage. Substituting the original, vegetable shortening with palm shortening resulted in increased retention of retinyl palmitate and beta carotene in formulation 5 and 8. Thus, increased antioxidant effect of natural antioxidants in palm shortenings contributed to stability of micronutrients.

Introduction Noodles have received importance worldwide due to their particular taste, flavor, convenience, consumer acceptance, and low cost. The noodles generally come under the category of unhealthy and junk food because of high carbohydrate content and low vitamins, minerals, and fiber content (Park et al., 2011). Due to the increasing popularity of instant noodles, many people are becoming more prone to various health problems. The substitution of various ingredients to wheat flour noodles is increasing by incorporating different pulses, cereals, and pseudocereals to improve the nutritional properties and also make them health food. Among the pseudocereals, the use of amaranth and chia seeds in food products has been increasing because of their high nutritional value and good health benefits. Their proteins have well-balanced amino acids with a high content of essential amino acids and also good bioavailability (Lopez et al., 2019). These pseudocereals are also gaining importance due to their high content of phytochemicals and other macromolecules. The amaranth (Amaranthus sp) seeds are spherical and small, having approximately 1 mm diameter with a creamish to light reddish color. The composition of amaranth flour includes amylose (7.05%), proteins (15.27%), fat (7.33%), crude fiber (2.04%), and ash (2.93%) (Siwatch et al., 2019).

In India after rice wheat (Triticum aestivum L.) is the second most important cultivated food crop belonging to family poaceae. Total production of wheat was 760 million tons in India during 2016-2017 (FAOSTAT, 2017) which is second largest in the world after china. In India highest producing state of wheat is Uttar Pradesh followed by Punjab, Haryana, Madhya Pradesh, Rajasthan etc. Wheat is categorize into seven commonly known wheat classes those are hard red spring, hard red winter, soft red winter, hard white, soft white, durum and mixed wheat (Khamis, 2014). 

Abstract

Micronutrients and bioactive compounds must be part of the population's diet in sufficient amounts to meet the body's needs. The concentrations of micronutrients and bioactive compounds in plant foods at harvest are known to vary with such factors as the variety or cultivar, stage of maturity, geographic or climatic effects, etc. Most subclasses of polyphenols e.g., phenolics acids and flavonoids, the effects of processing on the contents were found negligible in comparison to the differences between varieties of plants but carotenoids are among the food components most affected by environmental and processing conditions. Thermal processing has long been known to cause significant losses of vitamins, carotenoids and anthocyanins. The heat treatment viz. blanching, pasteurization, sterilization etc. result in losses of thermally labile nutrients and bioactive compounds, but the inactivation of oxidative and other degradative enzymes (e.g., lipoxygenase for carotenoids, polyphenol oxidase for flavonoids, ascorbic acid oxidase for vitamin C). Nutrients in dehydrated products are more likely to undergo degradation during storage because of the greater surface area exposed to oxygen and light. Blanched products generally resist decomposition better than unblanched foods during storage. Compared to losses during processing, subsequent storage often has a small but significant effect on vitamin and bioactive compound contents. Reaction rates are relatively slow at ambient or reduced temperature. The processing method chosen, and storage condition applied finalise the retention of these compounds which decreases with longer processing time, higher processing temperatures and storage of the food.

INTRODUCTION

EGGS : Eggs and egg products constitute an important part of family meals. The economic importance of the egg to agriculture and industry, its multiple uses in the preparation of many food products, and its excellent nutritive value have stimulated scientific scrutiny into the nature of the egg.

STRUCTURE : The chief parts of the egg are the yolk, the albumin (the white), and the shell and the shell membranes. The yolk is more complex structurally than may be thought at first glance. At the very center is a light coloured structure called the white yolk. The vitelline membrane serves as the enclosure or sac for the yolk. The strength of this membrane is important when yolks and whites needs to be separated in cookery. Two important rather twisted membraneous structures extend from opposite sides of the yolk into the white.

In order to assess the quality characteristics of eggs the book reference values were taken for comparison

This chapter introduces the principles used to preserve egg quality and extend shelf life after laying. It examines deterioration mechanisms during storage, including moisture loss, carbon-dioxide loss, albumen thinning and weakening of the vitelline membrane. Refrigeration, thermostabilization, shell coating, oiling, controlled and modified atmospheres, water-glass preservation and emerging non-thermal approaches are discussed. The chapter also introduces kinetic shelf-life modelling and time–temperature concepts for predicting quality deterioration. Emphasis is placed on maintaining an unbroken cold chain and controlling temperature and humidity during storage.

This chapter introduces the processing of shell eggs into industrial egg products. It classifies products according to egg fraction and physical state, including whole egg, albumen, yolk, liquid, frozen and dried products. Breaking and separation operations, liquid egg production, pasteurization, freezing, dehydration, spray drying and desugarization are discussed. The chapter also covers quality control, packaging and storage of processed egg products. Particular attention is given to balancing microbiological safety with functional properties during pasteurization and processing.

This chapter introduces the concepts of internal and external egg quality and explains the methods used to measure important quality attributes. It covers shell quality, shell strength, cleanliness, shape, albumen quality, yolk quality, air-cell characteristics and freshness. Classical indices such as Haugh unit, yolk index and specific gravity are discussed alongside candling and modern non-destructive instrumental techniques. The chapter also explains how egg quality changes during storage through moisture and carbon-dioxide loss and provides a scientific basis for interpreting quality measurements and applying them in commercial grading.

This chapter introduces systematic approaches for controlling biological, chemical and physical hazards throughout the egg chain. It explains the seven principles of HACCP and their application to shell eggs and egg products. Prerequisite programmes, GMP, GHP, FSSAI regulations, international regulatory frameworks, traceability, recall management and risk communication are discussed. A worked HACCP plan for liquid egg demonstrates how hazards and critical control points can be identified and controlled. The chapter emphasizes that egg safety requires an integrated farm-to-fork approach rather than relying solely on processing-plant controls.

Introduction

Proper electrical wiring and earthing are crucial for laboratory safety and functionality. A laboratory houses several installations/equipment that demand stable/continuous power supply. Inappropriate or faulty wiring and earthing may lead to significant risks, including electrical shocks, damage to equipment, and even incidence of fire. Therefore, understanding the requirements of electrical wiring and earthing is essential for designing, construction, and maintenance of laboratory. This chapter aims to provide a basic knowledge of electrical wiring and earthing necessary for a laboratory. Importance of earthing in mitigating electrical hazards and ensuring integrity of electrical installations are also described.

Basics of Electrical Wiring

Basic understanding of electrical wiring is necessary for laboratory safety and efficient electrical functioning. The potential difference between two electrical points (negative and positive) is known as Voltage, which drives the flow of electric current. This is measured as volt (V). The rate of flow of electricity in a circuit is known as Current (I), which is measured as ampere (A). Current can be either direct (DC) or alternating (AC). Opposition/resistance experienced in the flow of current in circuit is known as Resistance (R) and it is measured in ohms (Ω). Higher the resistance means lesser the current flows at a given voltage. The rate at which electrical energy is transferred/utilized in an electric circuit is known as Power (P), which is measured in watt (W). The Power can be calculated as the product of voltage and current (P = V × I).

Abstract

Increasing global demand for ‘fresh-like’ processed food products has forced food industries to investigate into various minimal processing techniques. Food processing in general has been associated with thermal processing, alone or in various combination with chemical and mechanical preservation and processing methods. However, thermal processing methods are energy intensive in nature and tend to reduce product quality and freshness at the cost of shelf-life gain. Advance technique such as microwave, radio-frequency and freeze drying do maintain the product quality but their implementation at industrial scale involves high operational and maintenance cost. An ideal processing method therefore would be one that can process food products without losing its quality, is energy efficient and is easily scalable. In this chapter, we discuss about ‘Electrohydrodynamic (EHD) Drying’, which is can be classified as a minimal processing technique. The heat and mass transfer principles involved in EHD drying have been extensively discussed and so has been the key consideration for designing an EHD drying system.

Electromagnetic and advanced heating technologies offer rapid and energy-efficient alternatives to conventional food processing. These systems use microwaves, radio frequency, electrical resistance, infrared radiation, lasers, photonic energy and dielectric heating to generate heat within food or directly at its surface. Faster and more uniform energy transfer can improve microbial inactivation, shorten processing time and reduce damage to nutrients and sensory characteristics. The chapter explains the principles, mechanisms, applications and nutritional effects of microwave, radio-frequency, ohmic and infrared heating. It also considers laser-based and photonic techniques. Particular attention is given to heating uniformity, product properties, equipment control, energy efficiency and the prevention of underprocessed areas.

Introduction

The basic physiological structures of mammary glands in all species are almost same and are located externally in order to fulfill the milk requirement of neonates after parturition. The process of secretion of milk from the mammary glands is known as lacto genesis. Milk provides an almost complete nutrition to neonates from birth till weaning period. It is a complex mixture of various constituents like:

Lipids such a striacyl glycerols(TAG),phospholipids,cholesterols and other sterols, free fatty acids and fat-soluble vitamins

Carbohydrates such as lactose, oligosaccharides

Proteins such a scaseins, α-lactalbumin, β-lactoglobulin, immunoglobulin’s, bovine serum albumin, lactoferrin, lysozyme, enzymes, hormones and growth factors

Non-protein nitrogenous compounds like urea, creatine, creatinine, uric acid and amino acids

Major and minor minerals, water-soluble vitamins and cells (leucocytes, macrophages, and epithelial cells).

Emerging preservation technologies are being developed to meet increasing expectations for food safety, nutritional quality, sustainability and longer shelf life. Greater investigation remains necessary to understand their effects, limitations and suitability for large-scale industrial application. This chapter examines innovative physical, chemical and biological methods used at different stages of the food chain. Technologies include plasma-activated water, cold atmospheric plasma, advanced oxidation, electrolysed water, space-food preservation, hurdle systems and biopreservation. Their mechanisms involve reactive species, microbial membrane damage, oxidation, combined environmental stresses and beneficial biological agents. The chapter assesses their applications, advantages and disadvantages while highlighting research, regulation, process standardisation, equipment cost and commercial scalability.

Introduction

Food fraud is not new it can be traced back to ancient Rome and Athens, where regulations prohibiting the adulteration of beverages with flavours and colours were in place. It exists since the food trade has been started. Food fraud affects all food supply chains, thus the entire food sector. Due to globalisation and the increasing complexity of supply lines, food supply chains are becoming more vulnerable to food fraud (Robson et al., 2021a). A fraud is “any act or omission relating to the use or presentation of false, incorrect, or incomplete statements or documents, or non disclosure of information in violation of a specific obligation, and any other illegal activity affecting the financial interests” (EU No. 2017/1371).

1. INTRODUCTION

The growing demand of consumers for fresh, safe, chemical, additive or preservative free and minimally processed foods has compelled the food scientists and technologists to develop many non-thermal food processing technologies which cause minimum nutritional and sensory qualities impairment in the processed foods. In this endeavour, consumers prefer minimally or non-thermally processed foods rather than the thermally processed one. Today, non-thermal technologies like High Pulse Electric Field (HPEF) processing, High Hydrostatic Pressure (HHP) processing or Hight Pressure Processing (HPP) food irradiation, ultraviolet light, ultra sound, arc discharge, oscillating magnetic fields, light pulses, plasma, chemicals (ozone, carbon dioxide, argon), and the combined methods of these technologies are the major areas of research in the process and food engineering in order to find their suitability for processing of various food products.

Abstract

Consumers are now more conscious about quality and source of their foods. Attempts made to determine the quality of food materials are numerous, but most of them are destructive in nature. In recent years, nondestructive methods of quality evaluation have gained momentum and a considerable attempts have been made to develop them. This paper describes application of these non-emerging technologies: magnetic resonance imaging, x-ray computer tomography, near infrared spectroscopy and a few other important techniques for determination of different quality attributes with special emphasis on grain, and discusses their pros and cons for practical exploitation.

This chapter introduces emerging technologies and future directions shaping egg science and the egg industry. It examines novel and non-thermal processing, active and intelligent packaging, sustainable packaging, egg analogues and plant-based alternatives, precision layer farming and digital tools. Nutraceutical and pharmaceutical applications are also explored. The chapter evaluates the environmental footprint and sustainability of egg production and identifies research gaps and opportunities, particularly for India. It concludes with a future-oriented perspective on improving cold-chain infrastructure, grading, food safety, welfare, value addition, sensing and evidence-based development of the Indian egg industry.

Introduction

All the worldwide cuisines generally rely on plant-based edible oils as the main cooking ingredient due to their unique chemical composition, further presence of unsaturated fatty acids in plant-based oils makes it a healthy complement in the diet. Lipids are known to provide almost double calories than carbohydrates. For ages, vegetable oils have contributed maximally to our nutrition and economics, but their authenticity is still a considerable issue (Firestone and Reina, 1996) as for more profitability fraudulent blends lower grade oils to high-grade expensive oils.

14.1 Introduction

The increasing human population and changing life styles have resulted in a huge demand for processed and packaged foods. As a result of this demand, large amounts of water, air, electricity and fuel are consumed on a daily basis for food processing, transportation and preservation. Although not one of the most heavily polluting, the food industry does contribute to the increase in volume of waste produced [1]. There is an increasing pressure from regulatory bodies through incentives, legislation and financial penalties to minimize waste generation and encourage adoption of eco-friendly options for waste management. Nanotechnology is a panacea for food waste management.

Emotional well-being is one of the most important dimensions of psychological well-being and mental health. Here an effort is being made to study the concept of emotional wellbeing. The concept of emotional well-being has acquired more importance in the field of health and positive psychology these days. It is much more concerned with mental and emotional health.

Emotional well-being, which is considered as the quality and subjective satisfaction of life is a measure of an individual’s perceived level of happiness. It is also related to self-concept. However, there is the relationship between self-concept with emotional well-being. But emotional health is related to emotional well-being, which is a part of mental health. Usually emotionally intelligent people represent better ability for problem-solving and for managing stress, more impulse control and a positive attitude towards oneself and others implying greater enjoyment of life, resulting in emotional well-being.

Emotional health depends upon a man’s emotional wellbeing, which is based on our self-concept, and self-esteem, that is how we feel about ourselves and behavior which is appropriate and healthy.