eChapters

Probiotics have been newly defined as ‘live microbes which passage the gastrointestinal tract and in doing so benefit the health of the consumer differing from the earlier definitions which focused on probiotic interfaces with original intestinal microbes (Fuller, 1989). These definitions of probiotic bacteria generally agree that probiotic bacteria should be living organisms toward consult health benefits. Probiotics have been reported to play a therapeutic role by modulating immunity, lowering cholesterol, improving lactose tolerance and preventing some cancers (Kailasapathy and Chin, 2000).

1. Introduction

Energy balance means keeping an account of how the flow of energy is taking place in and out of any system or process. It helps the engineers to estimate the total energy requirement and identify the area for conservation of energy in any process. In food processing the concept of energy balance is applicable in unit operation such as blanching, drying, evaporation, freezing, refrigeration, distillation, crystallization. The scopes of energy balance in food industry are:

i) Streamlining and reduction of energy consumption in the existing process.

ii) Selection and sizing of any equipment and process.

iii) Economic analysis of alternate process/technology.

iv) Designing new economically viable process/technology

Introduction

Over the years, processed food industry has become the largest growing industry in the world. The convenience food industry with the state of the art technology has been proved very successful in reaching every household and have started replacing fresh and healthy foods with the processed ones (Srinivasan and Shende, 2016).

Demand for processed and convenience foods are constantly on rise and convenience food segment is rising by leaps and bounds. Changing life style, food habits, displacement of rural population to urban centres, insufficient time to prepare healthy food and changing socio economic needs have led to the industrialization of the food supply and resulted in the development of convenience foods and today a great variety of the same are available for sale to the consumer throughout the world (Tillotson, 2003).

These convenience foods are available readily, convenient, inexpensive with pleasing organoleptic quality, requires minimal or no preparation before consumption. Varieties of convenience foods which are available in the market play a prominent role in the food choice of today’s consumer, and they include frozen and canned vegetables, bakery products, soups, sauces, prepared meat and fish, chilled and frozen dairy products as well as ready to eat and shelf stable products (Tillotson, 2003).

Rapid switchover of the consumer from the traditional dining practices to fast food centres, generally feed on quick and easily made products called fast foods, often termed as unhealthy junk foods. These foods are rich in saturated fatty acids, several refined components, high carbohydrates etc., which ultimately lead to the negative impact on physical and mental health of the consumer, contributing to several chronic diseases such as cardiovascular complications, cancer, atherosclerosis, liver disease, type 11 diabetes (Veggie et al., 2018) etc.

Therefore, focussing much about the health of the consumer, there is a great need for a healthy and a balanced diet to meet the basic needs of the human body (Mendes et al 2013) with an appealing organoleptic properties and appearance.

Abstract

Design, operation and optimization of dryers demands the calculation of energy consumption, in most cases in the form of thermal energy, equipment sizing, temperature and moisture distribution of solids as well as temperature and humidity distribution of drying air. Energy calculations are very important as drying is a widespread process in a variety of industries and is highly energy demanding. In the energy analysis of the process the first step is the estimation of the minimum energy requirement followed by the estimation of energy rejection through solids stream and especially through drying air. Increase of thermal efficiency is always willing and the two most common ways for its achievement is the application of heat exchange between cold feeding air and relatively hot rejecting drying air and hot air recirculation. The later is also employed for the adjustment of air temperature and humidity gradient through the dryer. The combination of a heat pump with the dryer decreases considerably the thermal energy consumption but demands electricity and the method can be beneficial in cases of excess electricity production in the process plant, e.g. by cogeneration. Utilization of exhaust hot air from the main drying unit for the predrying of wet solids can also decrease the total energy requirement. The application of humidity adsorption from the feed air increases its drying potential, but regeneration of adsorbent is required. Grand composite curve of the process plant can reveal potential heat sources from different unit operations.

1. Introduction

1.1 Engineered health rice

Rice is one of the leading food crops in the world and sustains two-third of the world’s population providing 20% of the world’s dietary energy supply. It can be polished and marketed as white rice or can be marketed with the bran layer left intact as brown rice. The dry grain can then be steamed or boiled by the consumer to rehydrate and cook it (Kato, 2006). Despite its primary importance as a staple food, rice has several disadvantages. Primarily, rice is low in protein and high in starch. The low protein levels in rice can lead to protein malnutrition in societies where rice is the primary constituent of the diet. Deficiencies in essential amino acids may also result from a diet primarily comprised of rice. For example, lysine is the essential amino acid found in the lowest quantity in rice. The human body needs lysine for proper growth and repair of tissues. It is also important in the production of various enzymes, hormones and disease-fighting antibodies (Kato, 2006). The production of broken rice is nearly 15-20% of total production of rice (Bhullar and Bhullar, 2013). The broken rice is generally used for rice flour production and Indian traditional foods such as Idli, Dosa and weaning foods etc. Ugwu et al., (2012) reported that the rice broken can be utilized for the production of poly (3-hydroxybutyrate). The major value addition of broken rice is possible by reconstructing it into rice-shape and fortifying it with desired nutrients or micronutrients, which is a big challenge in terms of making the product acceptable to the consumers.

One approach to overcome the above mentioned challenges is to prepare artificial rice kernels or rice analogues by extrusion, in which the vitamins are embedded and consequently do not separate from the rice grains. This will utilize mainly the broken rice which is either discarded or sold at subsidized prices as the cattle feed. Furthermore, embedding makes extraction of the vitamin by rinsing or cooking more difficult and may provide a certain protection against oxidation, because the vitamins can be enveloped by a protective matrix (Steiger, 2010). The fortification of commercially produced staple foods allows exposed populations to benefit without making major changes to their eating habits (Kunz, 2009).The rice analogues prepared from extrusion can be used by addition of an appropriate proportion of water at a temperature ranging from 90°C-100°C, whereupon the rice product rehydrates within three minutes to obtain a product having the desired appearance and organoleptic properties to simulate natural rice grains (Harrow and Martin, 1982).

Introduction

The COVID 19 pandemic is threatening food systems and international food security. According to the World Food Programme (WFP), that says the amount of individuals facing crisis hunger is anticipated to virtually double this year to 265 million. Already, quite 820 million individuals don’t get enough food to eat, and another a hundred thirty five million individuals face acute hunger or starvation. Increase that, the economic destabilization caused by COVID-19, and another a hundred thirty million people are in danger of starvation by the top of 2020, says WFP. The quickness with that a health crisis transforms in an exceedingly hunger crisis shows however fragile is our food systems to shocks of any nature.

According to a recent study, over 94% of new businesses fail during first year of operation. Lack of funding turns to be one of the common reasons. Money is the bloodline of any business. The long painstaking yet exciting journey from the idea generation to revenue generating business needs a fuel named capital. That’s why, at almost every stage of the business, entrepreneurs find themselves asking – How do I finance my startup?

Now, when an entrepreneur require funding depends largely on the nature and type of the business. Here is a comprehensive list of funding options for startups that will help the entrepreneur to raise capital for business.

ABSTRACT

The ancient fruit “Jackfruit” is one of the most remunerative and important underutilized native fruits of India. It is extremely versatile sweet tasting fruit and vegetable rich in nutritional value. Modern technologies are evolved for the development of value-added products from jackfruit is studied in the present study. To prevent from post-harvest losses the wine production from jackfruit juice which is a very good substrate for fermentationcan be done at larger scale. Popularity of jackfruit from the limited regions can be explored over the country. There is a good scope and possibility of marketing the value added products in the country. Value addition is carried out by minimal processing by changing its form to a valuable product having more shelf life. The developed products enhance good income opportunities for farmers and also entrepreneurship opportunities for small and medium enterprises for the popularization of jackfruit to a wider region.

Keyword: Jack Fruit, Value Addition, entrepreneurial opportunities.

7.1. Introduction
Entrepreneurs serve as the catalysts for the introduction of innovative technologies and systems that ultimately lead to societal advancements. These innovations are linked to enhanced lifestyles, progressive thinking, morale, and bravery, along with an improved standard of living. National and global changes are greatly influenced by such kinds of social change. Joseph Schumpeter, an Australian famous economist, is referred to as the father of entrepreneurship. Dhirubhai Ambani was the most enterprising Indian entrepreneur. Jamsetji Tata set a bar for entrepreneurship development in India with the foundation of the Tata group. The father of entrepreneurship in India is Ratan Tata. In public health, nutrition-based entrepreneurship and self-employment are also another emerging topic nowadays. Several entrepreneurs are found in this field mostly due to the challenge of building a business and craving to control their destiny. Not only that, financial independence, personal satisfaction, relief from the frustration of working for someone else, and the opportunity to create the desired lifestyle. Nutrition entrepreneurship offers numerous business-related resources and provides services for social well-being. As for example, the transformation of raw food ingredients into consumable food products, entrepreneurship plays a key role in diversifying and commercializing agricultural products. It adds value of food, prolongs its shelf life, promotes the export of processed items, generates employment opportunities, boosts farmers’ earnings, and makes a significant contribution to the general development of rural areas. Health entrepreneurs like nutritionists, dietitians, physicians, and health counsellors run their practice and make it available for the client to listen to their problems and solve their problems through mental support, motivation, diet therapy, medication, and so on. As a result, the health burdens due to noncommunicable and communicable diseases are reduced.

Introduction

Agriculture and allied sectors have always been the backbone of the Indian economy and despite concerted industrialization in the last six decades agriculture still occupies a place of pride. The significance of agriculture in the national economy arises from the role it plays in India’s national income, employment generation and export earnings; this can be seen from the provisional estimate on contribution of various sectors to the GDP in the f irst quarter of 2020-21, particularly during COVID-19 pandemic, positive percentage change (+3.4) over previous year when all other sectors have negative change.

Mushrooms is known for its delicious and nutritious food with highly digestible lysine rich protein, vitamins and minerals, Mushroom serves as a low calorie food which lacks fats and are low in carbohydrate. They are rich in folic acid, phosphorus, potassium, calcium, copper and iron and vitamin-B complex. In place of starch, mushroom contains sorbitol and linolenic acid. They are excellent sources of thiamine, riboflavin, niacin, pantothenic acid, biotin, folic acid and vitamin B-12. Further, mushrooms are also reported to have high medicinal attributes. A large number of mushrooms contain biological active polysaccharide protein complex having anti-tumor, immune-modulating and antioxidant properties.

The total milk production in the country for the year 2013-14 has been estimated at 126 million metric tonnes and the demand is expected to be 180 million tonnes by 2020. To achieve this demand annual growth rate in milk production has to be increased from the present 2.5 % to 5%. Thus, there is a tremendous scope/potential for increasing the milk production through profitable dairy farming.

a. Requirements of project report for setting up dairy units

Project report can be prepared by a beneficiary after consulting local technical persons of State Animal Husbandry Department, DRDA, Dairy Co-operative Society / Union / Federation / commercial dairy farmers.

1. The Aflatoxin Molecule

Aflatoxins are chemically difuro-coumarin derivatives. Presently, 18 different types of aflatoxins have been identified with aflatoxin B₁, B₂, G₁, G₂, M₁ and M₂ being the most common. Of these Aflatoxin B₁ (AFB₁) and G₁ occur most frequently, with AFB₁ being the most potent. Physicochemical and biochemical characteristics of the AFB₁ molecule reveal two important sites for toxicological activity (Heathcote and Hibbert, 1978). The first site is the double bond in position 8,9 of the furofuran ring (Figure 1). The interactions of aflatoxin, DNA and proteins, which occur at this site alter the normal biochemical functions of these macromolecules and leads to deleterious effects at the cellular level.Monteiro et al. (1966) studied the in vitro interaction of groundnut proteins namely arachin and conarachins with AFB₁ molecule. The second reactive group is the lactone ring in the coumarin moiety (Lee et al., 1981). The lactone ring is easily hydrolyzed and is therefore vulnerable to degradation.

Carbohydrates (glucose) are the primary energy source for a body; when digested, glucose is the end product in human beings and simple stomach animals, but it yields volatile fatty acids in ruminants. Precise regulation of levels of blood sugars/glucose in the body is the net result of various processes like digestion, absorption, and metabolism operating under the interaction of various a) enzymes and b) hormones secreted by the different organs of the body. An abnormal secretion of any of the enzymes or hormones associated with the metabolism of carbohydrates disrupts the precise regulation of blood sugar, leading to various disorders.
14.1 Enzyme Deficiency and Disorders in Carbohydrate Metabolism
Usually, various enzymes are involved in the breakdown of carbohydrates, and if their secretion is insufficient, missing, or does not work correctly, it leads to different disorders.
I. Glycogen storage diseases (GSDs, glycogenosis, and dextrinosis)
Glucose is needed by the cells for the generation of energy and other cellular activities. If glucose happens to be in excess, it is stored as glycogen, mainly in the liver and muscles, for future needs. The stored glycogen can be converted back to glucose when the need arises. Many enzymes are related to this interconversion of glucose and glycogen. Deficiencies of one or more enzymes may lead to abnormal glycogen metabolism, leading to glycogen accumulation of normal or abnormal chemical structure in tissue, collectively called glycogen storage diseases (GSDs). Roman numerals identify different types of glycogen storage conditions. They are also classified under various categories like inherited metabolic diseases, autosomal recessive type, and X-linked type (VIII/IX type).

Introduction

The entire living organism from the smaller creatures viruses to the advanced human beings are composed of a set up of biochemical reactions which form the metabolism. These set of metabolic reactions are responsible for the life of organism. The rate of these reactions is a major concern for effective working of organism which is governed by biocatalyst. These biocatalysts are known as enzymes, which accelerates rate of biochemical reaction. These are not utilized in reaction. In 1877, Wilhelm Friedrich Kuhne (Kuhne, 1877) proposed the term enzyme which means ‘in yeast’ and is derived from the Greek word; inzume “leavened” or “in yeast”. At the molecular level of study it is observed that enzymes are proteins which are functional as tertiary and quaratanary structures. Enzymes have active site for the binding to substrate. The active site has two positions; binding and catalytic site (Ogeston, 1948). The former help to bind the substrate with the enzyme followed by the catalysis of reaction by the catalytic site.

Introduction

Billions of chemical reactions are happening inside human body and that too with lightning speed. However, the same reactions if carried out in laboratory, they take a very long time. The reasons behind it are the biocatalysts, also known as enzymes, which are synthesized by living cells. Chemically, they are proteins(except ribonucleic acids: RNA), colloidal in nature, thermo-labile in character and very specific in their action. For example, hydrolysis of proteins by a strong acid at 100°C takes a couple of days; but same proteins can be digested within couple of hours inside human body at 37°C. Similarly, carbonic anhydrase is used as a catalyst by living cells to transfer carbon-di-oxide from cells to blood. This process is 107 times quicker than the same process if occurs without the help of enzymes. Therefore, enzymes can be defined as the biomolecules or biocatalysts which can speed up the rate of the chemical reactions. The substance upon which an enzyme acts is called as substrate and the one which is produced as the result of enzyme-substrate reaction is known as product.

1. INTRODUCTION

Enzymes are proteins with highly specialized catalytic functions responsible for many essential biochemical reactions in microorganisms, plants, animals and human beings. Enzymes play an important role in many aspects of life since the dawn of civilization that have used enzymes for thousands of years without understanding what they were or how they work. Food processing through the use of biological agents/enzymes is historically a well-established approach. The earliest applications go back to 6000 BC or earlier, with the brewing of beer, bread baking, cheese and wine making. Whereas the first purposeful microbial oxidation dates back 2000 BC, with vinegar production. In the late 19^thcentury, Christian Hansen reported the use of rennet for cheese making and production of bacterial amylases was started at Takamine (latter became part of Genencor). Pectinases have been used for juice clarification in the 1930s and during World War II, invertase was also employed the production of invert sugar syrup in a process that pioneered the use of immobilized enzymes in the sugar industry. Still, the large-scale application of enzymes could only be really established in the 1960s, when the traditional acid hydrolysis of starch was replaced by an approach based in the use of amylases and amyloglucosidases (glucoamylases) and glucose (xylose) isomerase. From then onward, the trend for the design and implementation of processes and production of products by the use of enzymes has steadily increased.

Food and beverages and household care industries represent the largest application areas of enzymes, followed by animal feed, biofuels, textile and other technical industries. Recently, several new developments have taken place in the application of enzymes in fruit and vegetable processing. Fruits and vegetables are consumed as fresh or processed into different type of products. Commercial enzyme preparations are used as processing aids in fruit and vegetable processing to improve the process efficiency and product quality, because enzymes show activity on specific substrates under mild processing conditions. Therefore, there has been a striking growth in the enzyme market for applications in the fruit and vegetable industry.

Enzymes are biocatalysts that change the rate of reaction without being changed themselves. All (Most) enzymes are proteins but all proteins are not enzymes. Ribonuclease is the enzyme which is non- protein in nature.

Properties of Enzymes

The following equipment and types of machinery are generally used in the food processing plant which specifically deals with the processing of fruits and vegetables;
I. Machinery/Equipment for general purpose
1. Weighing Balance (Precision balance for chemical and heavy duty for fruits/raw material) 1-500mg, 1kg,10kg,100kg.
2. Cutting Knife (SS), coring knife, pitting knife, peeling knife
3. Abrasive peeler (carborundum crystal) for potato,carrot,ginger etc.,
4. Working Table with Stainless steel/Aluminium top
5. Buckets/ Water tubs/jugs (Plastic/Stainless Steel)
6. LPG/Diesel Bhatti/furnace/Stove
7. Utensils/Bhagona (Aluminium /Stainless steel); 10, 50,100 kg capacity
8. Spoon, ladle (heavy duty), grater,`
9. Belt conveyors

Introduction
With the dynamic change in the pace of human activity and changing life style, the demand for easy-to-prepare drinks is also increasing. Besides being consumed in the household, these drinks are also served in restaurants, clubs, airlines, railways etc. There has been an appreciable increase in the export of processed foods which includes squashes, cordials, and syrups. With the fast pace of growth in the urban sector and the increase in living standards of the Indian people reaching higher levels by the year, there is a good potential to develop this industry in the small-scale sector. To prepare fruits and vegetable juices at commercial level, several equipments are needed. Some of the important equipment required for processing of specific fruit and vegetables are discussed herein.
Pome Fruit and Small Fruit Processing
Generally, most pome fruit (e.g. Apple, Pear, Quince) and small stone fruit (e.g. Plum, Olive, Peach, Cherry) can be used for juice extraction. No peeling is needed. Small stone fruit such as apricots and plums might have to be destoned (pitted) depending on the grinding, extraction equipment selection. Cherries, although containing a pit, may be pressed with the pit intact. Breakage of the pit will release benzaldehyde, the familiar aroma of maraschino- type cherries.

Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, roasting, grinding , ref ining , conching , moulding and enrobing operations which are accomplished using wide range of machinery. A few have been discussed in this chapter.

1. Bean Roasters

When cocoa beans were first brought to Europe, the method of roasting was quite simple, often consisting of no more than metal trays suspended by chains over a fire, an ancient Middle Eastern technique for roasting coffee. The beans would be stirred by hand with a long stick or paddle until the roast was complete. Needless to day, this was very labor intensive and inefficient. Clearly, something more efficient was needed. The next development in roasting technology was not that far distant from roasters in use today. Metal cylinders or balls that could hold up to several pounds of cocoa beans would be suspended over the embers of a fire. A rod would run through the center and act as an axis upon which the roaster would turn. A hand crank on one end would allow the cylinder or ball to be turned while the beans were roasting. The result was a much more even roast than was before possible. Aspects of this technique remain in many of today’s roasters.

The establishment of a technology transfer office is an important and complex process for an organization. It needs careful planning to ensure its long-term sustainability. Before establishing a TTO, it is essential to evaluate whether institution’s core mission includes research commercialization, and if the volume and quality of its research output justify the need for an inhouse TTO. For institutions that may not meet all criteria, those institutions can collaborate or outsource for TTO services. It is also important to decide about its operational scope, funding, management, and for what kind of issues the office should develop a policy. There is no “right” way to set up a TTO, but successful TTO does require considering some key issues. This chapter outlines key steps and considerations for establishing a TTO. It also explains what physical infrastructures are needed, manpower, outlines the responsibilities and powers of TTOs.
2.1 Evaluating the need for a TTO
Establishing a TTO is an important step for any research focused organization. But before initiating a planning process for a new TTO, the organization must review its relevance by considering a few fundamental points:
Key considerations for institutions
1. Is institution’s mission focused on “research commercialization” If an institute’s primary mission is education, or it does not support research it might not be justified to create a TTO. For such institutions, it usually makes better sense to seek alternative solutions to the occasional technology transfer without the expense of a formal office. But institutions with strong research commercialization focus, a TTO has the ability to contribute meaningfully to the mission. The Association of University Technology Managers (AUTM), USA has identified following key motivations for initiating academic technology transfer:

The estimation of moisture in foods is one of the most important and most widely used measurements in the processing and testing of food products. It is used to determine the nutritive value of food, to express results of analytical determinations on a uniform basis, and to meet compositional standards or food laws. The level of moisture in different fruits and vegetables varies widely. Most fresh fruits contain more than 85-90% moisture in edible portions. Broad range of moisture content in common fruit, vegetables and their products as general guideline are given in Table 3.1.
Estimation of Moisture content in food products: Moisture content in foods can be estimated by following methods.
i. By Drying in an oven
ii. By distillation with an immiscible solvent
iii. By Chemical and physical methods (Infra-red heating method)

Introduction

In India, the ground water recharge in arid and semi-arid regions is very important particularly as most of the population residing in these regions depend on groundwater for drinking and irrigation purposes. In such scenarios, to alleviate the problems of drinking water, the collection and storage of rainwater to supplement existing water supply sources should be implemented. The utilization of rainwater is one of the best methods that can aid in sustainable urban development (Kim et al., 2005). Every drop of rainfall should be utilized to cater the demand of an ever increasing population as the present system of water supply may not be sufficient in future. The rain water collection & its utilization, seems to be the only option to satisfy the demand of arid and semi arid regions. In most cases, the rain water is the purest water source & contains very low impurities. It is necessary to adopt rainwater harvesting methods in places where the conventional water supply has failed to meet the peak period demand of the people for drinking water. Rain water harvesting is one of the most economical and practical methods to provide supplementary water supplies for drinking purpose.

Minor millets, that belong to members of the cereal grass family, are advantageous in areas where large crops like Bread wheat, Rice paddy, and maize are relatively ineffective because they have a wide range of genetic diversity and thrive in marginal environments. The varied soil types, temperatures, heat and light cycles, and rainfall patterns across India all support the cultivation of minor millets. Finger millet, barnyard millet, foxtail millet, proso millet, and many more types of minor millet are used in agriculture. The majority of those who depend on these millets for sustenance and income are small-scale indigenous farmers and dwellers of rainfed areas, mainly among impoverished tribal populations numbering in the millions. Coarse cereals,now a days known as Nutri cereals or nutraceutical flora and are no longer known as coarse cereals as a potential global answer to malnutrition and unrecognized hunger. Minor millets have long been an essential component of Indian tribal societies’ agricultural systems and practices. They have used little millets for both famine prevention and ethnomedicine since the beginning of time. This chapter focuses on how little millet could help people have access to food and nutrition security while reducing hunger and malnutrition.

Plant hormone ethylene is involved in a number of physiological activities within the plant system, ranging from seed germination to fruit development. Ethylene acts as a key player in accelerating fruit ripening by regulating the activities of different enzymes, and is responsible for shortening the shelf life and associated post-harvest losses during the storage of fruit crops. However, all fruit crops have different ethylene production capacities and vary in their response to ethylene. Hence, effective management of post-harvest ethylene is imperative for addressing the global challenge of reducing fruit losses after harvesting. In recent periods, numerous technologies and compounds have been developed for the suppression of ethylene and for enhancing in-situ oxidation of ethylene or inhibiting its production at a receptor level. Among these emerging techniques, the use of sachets, fumigating agents, catalysis and composite films embedded with nanoparticles has been found to be trending, but the use of some of compounds has been limited due to health risks or consumer unacceptance. However, most of these technologies are very costly and are not affordable for marginal farmers and developing nations. In order to address these issues, long term breeding approaches for shelf-life improvement, targeting the tfs, ERFs have been involved. This manuscript fills the knowledge gap by encompassing all the recent progress made in enhancing the shelf life of fruits by managing ethylene during storage.

Ethylene (C₂H₄ also known as ethene) is a gaseous organic compound that is the simplest of the alkenes chemical structures (alkenes contain a carbon-carbon double bond). The hormone effects of ethylene on general plant growth were first noted in 1864 when leakage from gas street lighting systems caused stunting and deformation of nearby plants. In 1901 Neljubow identified the active component of the gas to be ethylene but it was not until 1934 that Gane identified that plants could synthesize ethylene and in 1935 Crocker proposed ethylene to be the hormone responsible for fruit ripening and senescence of vegetative tissues.

Ethylene play important role in many plant during development processes, including seed germination, vegetative growth, leaf abscission, flowering, senescence and fruit ripening. Ethylene also plays a role in response to water stress, chilling and mechanical injury.

Introduction

The international fish trade increases day by day reaching to a tune of USD 151 billion in 2020 (FAO, 2022). Many developing countries like India gain benefits from this trade as income through net foreign exchange reached to a level of 8.09 billion USD in 2019-20. Seafood supplied by developing countries contribute to 77% of fish consumption worldwide. The European Union (EU) is the single largest market for fish and fishery products to a tune of 91.74 billion USD in 2022 as a consequence of an increased per capita consumption among its Member States. Spain, Italy, Germany and the United Kingdom are the largest importer of fish and fishery products.

To protect consumer health and to protect the territory from the introduction of animal and plant diseases, the European Community (EC) has laid down joint conditions for imports of foodstuffs. The Directorate General for Health and Consumer Protection (DG SANCO) is responsible for food safety in the EU. The import rules for fishery products are framed of high standards with respect to hygiene, consumer safety and animal health status. It is important that importing countries and food business operators (FBOs) must understand the fundamental principles and requirements of the European Food Law to ensure efficient and smooth imports. The EU system relies on Government to Government assurances without any intervention of any private type certification or standards. The Competent Authority (CA) in the country of origin is responsible for giving the official guarantees to the EU regarding compliance and conformity to all requirements of its legislation. The Export Inspection Agency (EIA) is the Competent Authority in India for issuing the required official guarantees for export of fish and fishery products. The EIA maintains a complete list of all establishments under its control.

1. Multiple Choice Questions

Performance metrics and indicators
Traditionally, in the past, TTOs’ performance was measured in monetary terms, such as universities’ revenues derived through commercialization. The methodology, however, is prone to shortcomings, in light of the fact that various TTOs do not receive significant amounts of financial proceeds through their technology transfers. In addition, relying on income does not depict a TTO’s true potential, in light of the fact that it does not account for the total range of outputs of research and commercialization opportunities. Recognizing these limitations, academics have found innovative ways to measure TTO efficiency, such as monetary and non-monetary indicators. Financial indicators typically entail measurable outcomes such as number of signed licenses, income from licenses, royalties collected, equity income, and number of spin-offs or startups created. These are actual gauges of the economic returns from commercialization efforts, and in the majority of instances are used in the context of benchmarking the performance of a TTO in a comparative context, perhaps against peer institutions or industry averages. Non-financial indicators consist of royalty distributions to academics, having an integral role in encouraging academics to participate in commercialisation activity. By incorporating monetary and non-financial metrics, universities might have an enhanced, comprehensive evaluation system for their TTOs. Such evaluation is sure to ensure assessment extends beyond short-run monetary metrics and looks to incorporate several organization, institutional, and research-oriented determinants in driving successful technology transfer.

Rice is the longest continuously grown cereal crop in the world and according to the International Rice Research Institute (IRRI) it is “one of the most important developments in history” (Forssell, 2008). India has to produce 114 million tons of rice by the year 2030 to meet the food grain requirement of burgeoning population. In state Bihar, Kharif is the predominant season with rice cultivated in 3.2 m ha. On the other hand the rice is cultivated in about 1 lakh ha during Rabi season (Anonymous, 2014). The process-based dynamic simulation crop models based on soil, crop and weather factors could be effective research tools for planning alternative strategies for crop management, land use and water management and also a useful tool for planning and developing technological interventions in diverse areas like India (Aggarwal and Kalra, 1994).

1. INTRODUCTION

Food is constantly being rated for its quality either consciously or subconsciously by all people. Consumers choose food on the basis of its quality and their individual likes or dislikes. The attractiveness of food is clearly a quality which is important both to the manufacturer and to the consumer. When consumers make a selection they basically look for food that is attractive in terms of colour, flavour and texture apart from other psychological and social factors, which they may associate with food. The nutritional quality, shelf-life/keeping quality and cost factor are other criteria which may affect their selection.

The distinctive and attractive colour of food is not only pleasing but is also an indicator of good quality and freshness. The senses of taste and odour help us in detecting and appreciating different flavours and deciding on whether we like the food. The feel and texture of food entering the mouth should be firm, juicy, crisp and are extremely important characteristics that dictate the acceptance of a food. Today’s consumers are discerning, demanding, and more knowledgeable about food. They expect safe products having good value and high sensory quality. Therefore, knowing consumer’s preferences and perceptions of the sensory characteristics of food and beverage products is vital to food manufacturers. Without appropriate evaluation, there is a high risk of market failure.

1. INTRODUCTION

During fermentation, the fruit wines have to be monitored for different parameters to know the progress of fermentation and to control the quality of the finished products. It is essential to maintain the quality of the products, for which it is necessary to keep a complete record of wine fermentation. One such form is the fermentation control record or fermentation logbook, which is kept to monitor and record fermentation progress. It includes the name of fruit, variety, original characteristics of juice/pulp, amelioration, tank number, inoculum type and quantities, sampling time, date of start of fermentation and completion. It should also have daily record of temperature of fermentation, total soluble solid or ^oBrix reading, titrable acidity and volatile acidity, racking time/date and other comments on the fermentation. Fermentation control records should be completed and all new wines be entered in the bulk wine book inventory, the annual supplemental records can be kept in a file entitled, for example ‘Vintage season 2018’.

Introduction

Nutritive value of any food indicates the calories content as well as quality attributes. Macronutrients such as carbohydrates, fats and proteins provide energy by4-9-4 rule. It meanstheyprovide 4,9 and 4 kcal/genergy, respectively, when oxidized completely. Though micronutrientssuch as vitaminsandminerals do not provide any calories, they are essential for the enzymatic activity and metabolic reactions.

ATP or energy is measured in terms of ‘calories’ or ‘joule’. One calorie is the amount of heat required by 1g of water to increase its temperature from 14.5 to 15.5°C under standard conditions. Nutritive value of any food can be measured on shelf usingcalorimeter, in which food is completelyoxidized under specified conditions and converted into CO₂ and water.

Introduction In today’s environment, the greatest challenge for the food industry is to develop health promoting foods; it is determined by the raw materials used and its impact on consumer health. Furthermore, people lifestyle has changed greatly, resulting in a change in food eating patterns. In today’s world, people are moving towards eating foods that are nutrient base and tasty (Bonciu, 2018). of all the nutrient based products available in market, expanded snacks have become a popular snack all over the world because of its crunchy texture and low density making it consumer’s acceptance (Grasso, 2020). The basic idea for developing any expanded snacks is utilizing a starch-based material for a better crispy and crunchy product, but to make it more nutritious incorporation of protein and fibre rich raw materials is recommended (Gu et al., 2017). Along with the raw materials, the other important parameters for developing any extruded product is the particle of the flour, its physicochemical and rheological properties of the extrudates are much concentrated (Bouasla & Wójtowicz, 2021) Thereby, extruded snack is considering as functional food with major health benefits.

7.1 Introduction

Evaporation is an unit operation which converts a liquid into a vapour, leaving behind a concentrated solution or a higher boiling liquid. In other words, the goal of evaporation is to vaporize most of the water from a solution containing a desired product. Heat is the main tool in evaporation, and the process occurs more readily at high temperature and low pressures. Removal of water from foods provides microbiological stability, reduces deteriorative chemical reactions, and reduces transportation and storage costs. Evaporation can be distinguished from some other drying methods in that the final product of evaporation is a concentrated liquid, not a solid. It also differs from distillation, since the vapours produced in the evaporator are not further divided into fractions.

1. Introduction

Foods available in nature and, in some cases, the products made from it thereof contain quite an amount of water. This water not only adds volume to the food products but also provides a sight for attack by the micro organisms. Also, removal of water becomes essential if this water interferes with the end product chracteristics. There are several processes in food industries which are designed to get rid of this excess water, such processes are called concentration processes. The processes which can remove water from food substances are,- evaporation, freeze concentration and membrane based processes. All these process have their limitations in rendering solid content to the final product (Fig. 1). Perhaps, these limitations can be overcome by combinig the processes.

The objectives that are fulfilled by the concentration processes can be enumerated as follows:

Introduction

Baking is not a new concept to us. Baking process dates thousand years back since the Paleolithic age. During those days, the baking was done by simply grinding the grains, mixed with water and baked on the hot rocks. The bread produced that time was not leavened but flat. Ancient Egyptians have the credit for development of baking between 2600-1200 BC. Roman Empire also had the popularity of the art of baking and bakeries were in existence in Europe too during Middle Age. Baking was considered a highly respected profession under the Roman Empire. The art of baking has travelled a long journey since then. The bakery and confectionary has undergone a gradual evolution with time. Great technical progress stared in the nineteenth century. Development of automatic machines reduced the task of the manual labour and because of this development the bakers could perform many more tasks with the machines. Today’s baking has a dependency on the machines. All the work is performed by the automated machines whereas the bakers only control the machine operations. The baking process has become easier, the efficiency has increased and the quality of the products has improved because of these high-tech machines. The preparation of bakery products using traditional methods has also improved over the time to minimize the energy and time consumption. Today’s consumer is very much concerned about his/her health and look for the healthy options in baked products. The trend has led to various innovative formulations for the baked products so that the health benefits may also be provided not only the calories. This chapter will discuss various advancements and trends in different types of bakery and confectionary products.

Horticultural sector, which is contributing significantly for food and nutrition security, employment opportunity and poverty alleviation, got a real boost only in the early 1990s which coincided with liberalization of Indian economy. National area and production of horticultural crops are showing increasing trend over the years and production of horticultural crops has outpaced the production of food grain since 2012-13(Press Information Bureau, Govt. of India, Ministry of Finance, 2016). According to Economic Survey 2015-16, the share of horticultural output in agriculture is more than 33% over last decade and the sector contributes 30.4% to GDP of Agricultural sector. Horticulture sector accounts for 37% of total export of agricultural commodities at present and the exports have recorded sustained rising trend (Jha et al., 2019). The export status of APEDA (Agricultural and Processed Food Products Export Development Authority) products in the recent years shows 28.18% growth in value of horticultural products over the previous year. The investment in horticultural sector with focused attention has resulted in spectacular change in the horticultural scenario and production and productivity of horticultural crops.

Introduction

Cell surface components such as adhesins, polysaccharides, and proteins play major roles in the adherence of probiotic bacteria to the intestinal epithelium, interactions that might lead to pathogen exclusion and immunomodulation of host cells. Probiotic bacteria have the ability to produce exocellular polymers called Exopolysachcharides (EPSs). These exocellular polymers present in the surface of many lactic acid bacteria, including Lactobacilli.The adhesive properties of lactobacilli are directly linked to their surface properties which are influenced by the structure and composition of their cell wall. The cell envelope of lactobacilli, bacteria, is composed of the bilipidic plasma membrane with embedded proteins encompassed by the cell wall. The bacterial cell wall consists of a thick multilayered sacculus made of peptidoglycan (PG) with teichoic acids (wall teichoic acids (WTA) and/or lipoteichoic acids (LTA)), exopolysaccharides (EPS), proteinaceous filaments called pili, and proteins that are anchored to the cell wall through different mechanisms (Figure 1).

Some species of lactobacilli possess an additional paracrystalline layer of proteins surrounding the PG layer, referred to as the S layer. These macromolecules together may play crucial roles in determining species and strain-specific characteristics of lactobacilli by influencing host-microbe interactions and microbial adaptations to the changing host environment. Several studies implicate that cell surface components, either individually or collectively, involve in host-microbe interactions. Lactobacilli beneficially affect the host in many ways by producing abundant variety of EPSs through the activity of extracellular glycosyl transferases. Approximately 30 species of lactobacilli are described as EPS producers. Among them, the best known are L. casei, L. acidophilus, L.brevis, L. curvatus, L. delbrueckii bulgaricus, L. helveticus, L. rhamnosus, L. plantarum, L. johnsonii, etc.

Ex.No.1. MICROBIAL SPOILAGE OF FRUITS

Fruits are living structures that continue to perform metabolic reactions and sustain physiological processes for a considerable length of time after harvest. The post-harvest infection of fruits by microorganisms may cause serious losses of fruits both in terms of quantity and quality. Initial infection which may be the direct result of mechanical or insect damage is followed by invasion of fruit tissues by secondary infection by common saprophytic organisms. . Many bacteria and fungi, for instance, are involved in decay after harvest. Typical fungi include Alternaria, Botrytis, Colletotrichum, Fusarium, Monilia, Penicillium, and Rhizopus. These fungi are generally weak pathogens, in that they usually infest only weak or damaged fruit. Molds are the most predominant spoilage organisms in fruits. Fungal rots in fruits like apple show brown or cream coloured areas.

Bacterial soft rot caused by Erwinia carotovora is wide spread in fruits that are not very acid. Fruits like straw berries, melons are in direct contact with moist soil and become infected from that source.

1. Introduction

India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. India is the second largest producer of fruits and vegetables in the world, with an annual production of fruits 45.5 Million tonnes and vegetables 90.8 Million tonnes. It contributes 10.23% and 14.45% of the total world production of fruits and vegetables (F&V) respectively (NHB, 2010). Though fruits and vegetables are grown only on 7–8% of gross cultivated area, these contribute more than 18.8% of the gross value of agricultural output and 52% export earnings from total agricultural produce. These have a high export potential of 20-30 times more foreign exchange per unit area than cereals due to higher yields and higher price available in the international market (Sen et al., 2012). According to estimates, the per capita consumption of fruits and vegetables in India is only around 46g and 130g which are far below the stipulation of a minimum of 92g and 300g respectively as recommended by the Indian Council of Medical Research and National Institute of Nutrition. The low availability is mainly due to considerably high post-harvest losses. About 15-20% of the fruits and vegetables are wasted every year in the country, due to poor post-harvest management and lack of infrastructural facilities for processing and storage, amounting to a revenue loss of over Rs. 625 billion.

The sensorial, nutritional, and organoleptic quality of fresh produce starts deteriorating after harvest as a result of soon after harvest the altered plant metabolism and microbial growth. The quality deterioration is the result of produce respiration and transpiration, senescence, ripening-associated processes, wound-initiated reactions, development of postharvest disorders, microbial proliferation leading to postharvest quality loss. Therefore, it is necessary to understand the respiration and ripening processes and the physiological and biochemical changes during ripening. The best way to reduce respiratory metabolism is to reduce the storage temperature. All biological processes proceed more slowly at lower temperature (Yahia, 2007). In general, O₂ levels must be reduced to less than 10 % to see a reduction in the rate of respiration. Respiration rate is temperature dependent; so, as the temperature reduces the amount of oxygen required also drops. Therefore, oxygen levels must be substantially reduced at low temperature for it to affect the rate of respiration. It must however, be ensured that O₂ levels do not fall below extinction point as anaerobic respiration and decay may occur. Tolerance to low O₂ varies between species and cultivars and is also time dependent. Commodities may be able to tolerate low O₂ for short periods of time. Low O₂ can also be tolerated when CO₂ is low.

Materials Required

Fruit, pulper, fruit mill, hydraulic press, screw type juice extractor, stainless steel pans, chemical preservatives, glass bottles, closures, crown corks, crown corking machine, plastic barrels.

Procedure

    1.    Select and weigh sound fruits/vegetables for extraction of juice/pulp.    
    2.    Wash and peel the fruits as required.
    3.    Extract the juice by hot or cold process.
    4.    Pasteurize the juice/pulp to inactivate the enzymes and partially kill microorganisms.
    5.    Preserve the juice/pulp by heat processing after hot filling and hermetic sealing or by addition of permissible quantities of suitable preservatives.
    6.    Label the bottles properly and keep them for storage

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

1. Algal Biomass

Algae is defined as heterogeneous assemblage of organisms that range in size from tiny cells to giant seaweeds, thus algae mostly are photosynthetic species which include eukaryotes and prokaryotic Cyanobacteria (blue-green algae) and live in aquatic habitats. They are ubiquitous in nature and are found in variety of environments ranging from soil, sand, marshes, brackish water, sea and fresh water. Most of them are capable of manufacturing their own food.

Microalgal research is offering wide potential in food biotechnology and is gaining more attention because of presence of wide range of bioactive and nutraceutical properties and added health benefits.The increasing population is one of the major growing concerns of today’s world. To meet the nutritional requirement of the rising population, researchers are looking for optional sources for food which are easy to cultivate, cost effective and produce large amount of bioactive compounds useful to prevent major diseases. Chlorella is unicellular green alga that is a potential source of nutrients like carotenoids, minerals, vitamins, and polyunsaturated fatty acids. Especially, omega-3 fatty acid and carotenoids have received considerable interests due to their roles in the prevention of chronic diseases. Lutein and zeaxanthin from Chlorella have been shown to be associated with eye health and function. Beta-carotene is known to reduce the risk of CVDs and certain cancers. Animal studies also demonstrated that Chlorella supplementation reduced the serum cholesterol levels.

Similarly, the blue green microalgae Spirulina, possesses diverse biological activities and nutritional significance. Regular consumption of Spirulina fortified food improves immune system by increasing phagocytic activity of macrophages, stimulating the production of antibodies and cytokines, increase accumulation of NK cells into tissue and activation and mobilization of T and B cells. Spirulina have also shown to perform regulatory role on lipid and carbohydrate metabolism by exhibiting glucose and lipid profile correcting activity in experimental animals and in diabetic patients. They were also found to be active against several enveloped viruses including herpes virus, cytomegalovirus, influenza virus and HIV. They are capable to inhibit carcinogenesis due to antioxidant properties.

Extrusion cooking is an emerging technology having advantages of low production cost, capable of producing end products in various shapes and sizes, from a variety of food materials with easy digestibility, maintaining hygiene and high product quality and leaving no effluents or hazardous materials. Minimal energy consumption and processing costs and possibility of flavour addition are the added advantages of technology. The process/technique has the versality and ability to constituently produce a given product in continuity at a given set of pre – determined specifications. It destroys fat splitting enzymes to avoid rancidity and thus extends the shelf life of products considerably. Microorganisms present in food materials are destroyed. It can be effectively utilized to develop functional and designer foods by using several locally available under-utilized food materials. However, it leads to increased package cost as puffed or expanded food products have low bulk density. R & D studies are further needed for co – extrusion of variety of cereals with high fibre content foods and micronutrients.

1.1 Introduction and Background

In present scenario, the word “extrusion” refers to a process by which dry or semi-moist ingredients with varying in-barrel moisture are forced through varying barrel temperature, screw speed and screw configuration through a die opening of the desired cross section. In other words, extrusion is predominantly a thermo-mechanical processing operation that combines several unit operations, including mixing, coating, kneading, venting, shearing, heating, forming, partial drying or puffing, depending on the material and equipment used.

The origins of extrusion are in the metallurgical industry, where in 1797 Joseph Bramah patented the first extrusion process, wherein a piston driven device was used for making seamless lead pipes. The present understanding of extrusion technology and the developments or improvements in machine design are largely due to research carried out by the plastics industry. In food industry, this technology is in use since 1930 and its popularity is increasing continuously due to its efficiency, continuity and sustainability. In beginning, sausage extruders were developed in the nineteenth century as simple forming machines. One of the original developments which laid the foundation of the food extrusion was the use of pasta press termed as “cold extruder” in mid 1930s. Furthermore, in the late 1930s, General Mills, Incorporation., Minneapolis, MN, USA, first used a single screw extruder in the manufacture of ready-to-eat (RTE) cereals. Later in 1970s, twin screw extruders were used for the manufacture of moist pet-foods. Twin screw extruders were also adapted from polymer industry, as rising food quality and limitations of single screw extruders were demanding a more versatile process for the newer and higher quality products. After 1970s, the extrusion processing with simultaneous use of heat was popularized as a versatile and highly energy efficient with negligible wastage process. In all these years, number of changes has been noted in the extruder design such as changes in screw design, barrel design and also material used for the manufacture of these materials. Barrel liners availability along with already available segmented screws could further add more economics to the process and increased equipment lifetime. For better wearing characteristics, a number of screw elements of different materials are being used in addition to standard nitrided steel for customized processing needs, such as corrosion and wear resistant surface coated steels, stainless steel, satellite welded and bimetallic HIP (Hot Isostatic Press). JBL Feedscrews Limited, a UK based company recently introduced tungsten carbide coated screw in conjunction with a compatible bimetallic barrel. Likewise, a number of options for barrel metallurgy are available to withstand the higher internal pressure and temperature. Barrels lined with hard cobalt based alloy, typically Xaloy, to give abrasion and chemical resistance are also in use, although, the most common material is carbon steel with a nitride interior. Similarly, steam heated or jacketed barrels were used earlier for cooking purpose which gradually replaced by the electric induction heating elements. These HTST cooking extruders are versatile, highly productive and energy efficient processing machines. They can use a wide variety of raw materials and formulations to produce products with increased shelf-life and convenience.

F0 value: It is used to express F-value when z =10oC / 18oF and the temperature is 121.1oC. It is the number of minutes at a specific temperature (250oC) required to destroy or kill a stated number of microorganisms and has specific z-value. It is also called reference value.

Facing or lining board: The layer of the paper on which the flute is embedded is called facing or lining board (Plate 258).

Facultative anaerobic: Organisms that grow either with or without oxygen.

Facultative parasites: Facultative parasites can adapt to live on dead organic matter and often have a wide host range and can easily be cultured on artificial media. These organisms may be aerobic or anaerobic but under changed conditions, they changes to anaerobic or aerobic.

Falling rate period: It is that part of the drying process during which the drying rate varies with time and the instantaneous drying rate per unit surface or weight of dry material continuously decreases. Falling rate takes place when most of the moisture has been evaporated during constant rate period. The falling rate period during dehydration take place in the final stage of dehydration when the food commodities have large amount of free water available for evaporation. Here, rate of removal of the moisture from the food to the surrounding is continuously decreasing / falling per unit time.

This chapter introduces the major biological, nutritional, environmental and management factors that determine egg quality. It examines genetic and breed influences, hen age and stage of lay, nutrition and feed composition, housing systems, environmental conditions and heat stress. The effects of disease, medication, handling, on-farm management and storage are also discussed. The chapter emphasizes that egg quality results from interactions among multiple factors rather than from a single intervention. Induced moulting and nutritional management are considered as practical approaches to maintaining quality during the laying cycle.

    1.    Wohler (1828) synthesized the first organic compound, urea from inorganic components.

    2.    Emil Fischer (1894) demonstrated the specificity of enzymes and the lock and key relationship between enzyme and substrate.

    3.    Michaelis and Menten (1913) developed kinetic theory of enzyme action

    4.    Watson and Crick (1953) Proposed the double-helical model for DNA structure

    5.    Ingo potrykus (1999) Golden rice- rich in b-carotene.

    6.    Glyoxysomes : Glyoxysomes are temporary in that they occur during transient periods in the life cycle of a plant such as in certain beans and nuts which store fats in their seeds as energy reserves. Glyoxysomes appear in the first few days after seed germination in endosperm cells and associate closely with lipid bodies. They disappear after the storage fats are broken down and converted into carbohydrate.