eChapters

History of food safety starts with knowledge about food hazards. The term “safe food” can be defined from different angles since the end users are highly heterogeneous. However, the accumulating data and day by day emerging information aboutfood borne diseaseslead to a boom in public awareness about food safety. Food safety can be defined as “The strategies and activities aimed to protect foods from biological, chemical, physical, and allergenic hazards that may occur during all stages of production, distribution, and consumption” (Paperella, 2020). According to the World Health Organization (WHO), unsafe food,which contains hazardousmicroorganisms or chemicals, causesmore than 200 ailments, ranging from diarrhoea to malignancies among which diarrhoea is common. 

Food is essential for human survival. It provides the required energy and vital nutrients for sustainable growth and development. With the increase in population and awareness, the demand for nutritious, fresh and healthy food also increases. Although adequate food is produced in order to meet the increased demands, it fails to reach the consumers in need due to food Food Storage and Preservation Practices   35 wastage and spoilage occurring during various stages of harvesting, food production, storage and transportation. Gajanana et al., (2009) stated that there is a mammoth wastage of food post-harvest. It is estimated that 20 to 60 % of produce are wasted during and after post-harvest. 

Safe, wholesome and nutritious food is vital for sustenance, good health, food and nutritional security and augmentation of sustainable development of an individual. Also, safe food helps in the growth of the national economy and enhances the trade and tourism sector. Foods that are unsafe containing various kinds of microorganisms can cause chronic diseases or illnesses varying from diarrhea to cancer.

Growing population has increased the demand on food supply. Providing safe and hygienic food to the population is an essential consideration. Food safety systems and tools need to be in place to assure safe food, until which the food businesses would not flourish or be able to build their reputation. Food safety systems and management tools are important as they assist food business organizations to build confidence in people regarding food safety.

Liberalized economies and evolving businessstrategies push variousindustries to achieve a competitive edge both in the domestic and international markets. Food industry especially, works on the bedrock of quality of products and services in order to attract and retain customers. In this new world of economic order, customers can select from wide range of products and services that are available in the market.

A healthy life is ensured by having access to safe, nutritious and balanced food. World health organisation (WHO) ensures its contribution in developing food safety systems that are sustainable to reduce health risks from farm to consumer. Thus, safe food, its quality and consumer protection are the priorities of this organisation (FAO and WHO, 2021)

Food safety is a discipline ensuring safe consumption of food without any injuries to human health. It is multifaceted and influenced by various factors including, food processing, handling and practices, consumer demand and their knowledge, globalization of world food trade, changes in food consumption pattern (Chen et al., 2020).

Water is an essential component of all living things. Although once believed as a resource with a never-ending supply, it has now been understood that water is becoming increasingly scarce and therefore a proper management is necessary to keep a sustainable food production (Kannan & Anandhi, 2020). A continuous and safe supply of water is indispensable for the food industry where it has numerous applications along the agriculture and food production processes.

All food legislation is predicated on the food law, which protects public health and consumers’ regarding food. The regulation is applied to stages beginning from producing the food, processing and finally distributing the food and feed, apart from domestic use by consumers.

Appealing packaging isthe current trend which influences consumer’s decision to purchase foods. These trends have evolved in the last four decades due to constant and drastic changes in the food packaging processes and mechanisms. These changes have shifted the focus of food packaging from the basic function of containment to extending shelf life.

Nutraceutical is a broad term which represents any substance extracted from food sources with additional health benefits alongside the good nutritional value already present in them. The nutraceutical term was originated by Stephen De Felice in 1989.

At present, food and nutrition security are the prime aspects which need to be addressed in an efficient way. It has been projected that by 2050 the global population will reach 9.2 billion which in turn enhances annual demand for agricultural products by 1.1 per cent from 2005 to 2050 (McKenzie and Williams 2015).

Food provides a sense of wellbeing and comfort and makes people feel good. In this world of a growing population, the need for affordable, safe and good quality food is rising constantly. On the other hand, there is growing awareness of customers who demand that food be produced and supplied hygienically in socially responsible and eco-friendly ways.

The stiffness of starch gels from different starches at 5% concentration was shown in decreasing order of stiffness in the following table. Of the cereal starches corn starch gel was firmest followed by wheat and rice starch gels. Among the roots and tubers starches, potato yielded a ropy paste, arrowroot a soft paste while cassava starch gave viscous fluid.

Leavening agents produce carbon dioxide which helps to give characteristic structure to bread cakes and biscuits etc. In the case of cakes, leavening is produced by air entrapped in the dough due to the presence of egg in the mix. The important groups of leavening agent’s are l. baker’s yeast 2. Chemical leavening agents

1. Clean and wash the pulses, Mix the pulses with water, soak for 1 hour, 3 hours, 6hours, 9hours and overnight.
2. After soaking drain the water wash thoroughly and add fresh water keep it for boiling/cooking.
3. Study the effect of Acid and effect of Alkali on cooking time of pulses.

Procedure: weigh vegetables 20 g (for each variation) Water: add sufficiently
1. Cook the vegetable in water in a pan according to the “cooking time” variations given in the table 1 and note down the color, texture and flavor changes takes place during cooking for each variation and record the observations

Physical Properties of milk
Procedure: Collect different types of market milk samples and study the  properties of milk. Boil the milk and note down the properties given in table 1 and record the observations

Ingredients; milk fat (cream)-12%, non-fat milk solids (skim milk powder)-11%, sugar-15%, stabilizer-0.2%, emulsifier-0.2%, flavors-a pinch Basic ice cream preparation: 1. Mix the ingredients 2. Pasteurization 3. Homogenization 4. Ageing (allowing to standby 24 hours at 4.440C) 5. Freezing (the mix is frozen at 5.5560c) 6. The freezing must be quick in order to prevent formation of large crystals. The ice cream is semi solid at this temperature. 7. The ice cream is finally frozen to a hard mass at about -30C.

In order to assess the quality characteristics of eggs the book reference values were taken for comparison

(Ref: 1997-2016 American Meat Science Association)
The methods used for cooking meat can be divided into two groups:
1. Dry heat methods
2. Moist heat methods

Poultry meat-50 g for each method
Cook the poultry meat according to the methods given in the table and record the cooking effects

Takes clean, washed and edible fish-50-100 g for each method of cooking. And cook the fish according to the methods given table and record the characteristics of cooked fish.

Procedure: Measurement of smoke point of given oils: Heat the given oils in a deep frying pan till fumes come out from oil. Record the temperature when the fumes come out and noted it as a ‘smoke point’. Cool the oil by keeping oil pan at room temperature. After cooling repeat the heating of same oils 2nd and 3rd time to measure the smoke point and record the observations

Pure sugar when heated melts at about 160-1800c. at about 2100c sucrose loses water and becomes caramel.

Sensitivity-Threshold tests Sensitivity tests are conducted to assess the ability of individuals to detect different tastes, odors and feel the presence of specific factors in.

Formulation & method of bread making Baking is an exact science that requires precise measuring and accuracy. Accuracy is crucial in baking because most baked products are made from the same basic ingredients: flour, liquid, fat, sugar, salt etc. the difference between baked products are often the proportion of each ingredients in the formula. If the proportions are off, you will end up with a different product or an unacceptable product.

Drying is one of the oldest methods of preserving food. It is usually accomplished by the removal of water. Dried foods are preserved for long storage time because the available moisture is very low, so that the micro organisms cannot grow and enzyme activity is controlled. It is done by many methods. 1. Sun drying 2. Using mechanical dryers.

Selection fresh fruits/frozen stored fruits/chilled fruits/fruit pulp/sulphited fruit. Wash them to remove the dairt, dust, stems, leaves, stalks, undesirable portions.

Pickling is the process of preserving or extending the shelf life of food by either anaerobic fermentation in brine or immersion in vinegar. The pickling procedure typically affects the food’s texture and flavor. The resulting food is called a pickle, or, to prevent ambiguity, prefaced with pickled. Foods that are pickled include vegetables, fruits, meats, fish, dairy and eggs.

Yogurt is a fermented milk product that contains the characteristic bacterial cultures such as Lactobacillus bulgaricus and Streptococcus thermophilus. All yogurts must contain at least 8.25% solids not fat.

The RTS beverage was prepared by using freshly prepared carrot juice, sour orange juice, water and sugar as per FPO specification.

• Food science deals with the physical, chemical, and biological properties of foods as they relate to stability, cost, quality, processing, safety, nutritive value, wholesomeness, and convenience.
• Food science is a branch of biological science and an interdisciplinary subject involving primarily microbiology, chemistry, biology, and engineering.
• Food chemistry, a major aspect of food science, deals with the composition and properties of food and the chemical changes it undergoes during handling, processing, and storage.
• Food chemistry is intimately related to chemistry, biochemistry, physiological chemistry, botany, zoology, and molecular biology.
• Nonenzymic browning involves reaction of carbonyl compounds, which can arise from existing reducing sugars or from diverse reactions, such as oxidation of ascorbic acid, hydrolysis of starch, or oxidation of lipids.

Some chemical and biochemical reactions that can lead to alteration of food quality or safety

1. Carbohydrates are primarily composed of the elements
   1. Carbon, hydrogen and oxygen
   2. Hydrogen, oxygen and carbon
   3. Oxygen, carbon and hydrogen
   4. None of these
2. Carbohydrates have an empirical formula
   1. (CH₂O)_n
   2. (CH₂O)_n+₁
   3. (CH₂O)_n-₁
   4. (CH₂O)_n/₂

1. The protein is derived from Greek word “Proteins” which means
   1. Principal
   2. Prime
   3. Holding the first place
   4. All of the above
2. The name protein to the group of organic compounds that are utmost important to life is suggested by
   1. Mulder
   2. Berzelius
   3. Kulim
   4. Sanger

1. Lecithin is an example of
   1. Carbohydrates
   2. Hormones
   3. Vitamins
   4. Phospholipids
2. Which of the following acts as storehouse of energy in body?
   1. Hormone
   2. Vitamins
   3. Fats
   4. All of these

1. Flavor is a sensory phenomenon depending upon
   1. Taste, texture or mouthfeel
   2. Odour or aroma, appearance
   3. Temperature - sensation of heat or cold
   4. All of these
2. Flavours are minor constituents of foods, usually
   1. Nutritive
   2. Non - nutritive
   3. Energetic
   4. None of them

1. The first impression of a food is usually visual and major part of our willingness to accept a food depends upon its
   1. Size
   2. Shape
   3. Colour
   4. Texture
2. Colour can serve as a useful criterion of
   1. Quality
   2. Nutrition
   3. Texture
   4. Acceptability

1. The disease Beri - beri is caused due to deficiency of vitamin
   1. D
   2. C
   3. B
   4. A
2. Which of the following vitamin is found in Fish liver oil?
   1. Vitamin D
   2. Vitamin C
   3. Vitamin K and C
   4. Vitamin A

1. The non-protein component in enzymes which is necessary for its biological activity is called
   1. Nucleic acid
   2. Lipids
   3. Phosphoric acid
   4. Coenzyme
2. The coenzymes are derived from
   1. Hormones
   2. Vitamins
   3. Lipids
   4. Carbohydrates

Set 1

1. Match the followings:

1. (a & i), (b & ii), (c & iii), (d & vi)
2. (a & ii), (b & i), (c & iv), (d & iii)
3. (a & iii), (b & i), (c & iv), (d & ii)
4. (a & iv), (b & ii), (c & i), (d & iii)

HISTORICAL DEVELOPMENTS

Food Preservation 1782 ó Canning of vinegar was introduced by a Swedish chemist.

1810 ó Preservation of food by canning was patented by Appert in France. ó Peter Durand was issued a British patent to preserve food in ìglass, pottery, tin or other metals or fit materials.î The patent was later acquired by Hall, Gamble, and Donkin, possibly from Appert.

Who discovered bacteria?

a) Leeuwen hock b) Ledge berg

c) Walkman and Zinder d) None

The fungi are usually:

a) Parasites or saprophytes b) Lithophytes

c) Epiphytes d) Insectivorous

According to Pasteur statements which one of the following is true

a) Living organisms discriminate between stereo isomers

b) Fermentation

c) Living organisms doesnít discriminate

d) Both a and b

The method to preserve foods in sealed glass bottles by heat in boiling water was developed by one among the following scientist?

a) Edward Jenner (1798) b) Francois Nicolas Appert (1804)

c) Lazzaro spallanzani (1765) d) None of the above

Nisin is produced by strains of

a) Streptococcus lactis b) Pseudomonas

c) E. coli d) Clostridium

Fruits and vegetables are very important food commodities. India has become the largest producer of fruits and the second largest producer of vegetables. Though the production of fruits and vegetables make us believe in our strength for self-sufficiency, a significant qualitative and quantitative loss occur in the produce from harvest till consumption.  For self sufficiency and also for processing, export and to meet additional requirements, a lot of emphasis need to be given to reduce post harvest losses, besides increasing  production and productivity of horticultural produces. Processing plays an important role in  conservation and effective utilisation of these perishable commodities. However, only less than 2% of total production of fruits and vegetables are processed.  The new industrial policy has placed this sector in the list of high priority areas.

Structure

Structural unit of edible portion of most fruits and vegetables is the parenchyma cells and makes up bulk of cells. A parenchyma cell is rather thin walled and may be polygonal or cubical in shape.  Walls of parenchyma cells in young plants are composed almost entirely of fibrils of cellulose. In parenchyma cells of plants actively metabolising protoplast portion represents only about 5% of total cell volume. This protoplast is rather film like and is pressed against cell wall by large water filled central vacuole.  Protoplast has inner and outer semi permeable membrane layers between which is confined cytoplasm and its nucleus. 

Maturity at harvest is the most important determinant of storage life and final fruit quality. Maturity indices are determined for many fruit, vegetable and floral crops. Harvesting crops at proper maturity allows handlers to begin their work with the best possible quality produce. Produce harvested too early may lack flavour and may not ripen properly, while produce harvested too late may be fibrous or over ripe.
 
Almost all fruits reach their best eating quality when allowed to ripen on the tree or plant (exceptions e.g., pears, avocados, and bananas). In general, fruits become sweeter, more colourful, and softer as they mature. A few fruits are usually picked mature but unripe so that they withstand post harvest handling system when shipped long distances.  Most of  currently used maturity evaluation is based on a compromise between those methods that would ensure the best eating quality and those that provide flexibility in transportation and marketing.  Optimum harvesting stage depends upon type of fruit or vegetable and their final use. Such a division is usually based on their classification according to physiology, environmental conditions, ripening bahaviour and nutritional aspect. Some of the classifications, important for their harvesting and storage are briefed in  subsequent sections.