eChapters

Most traditional food processing techniques like boiling, cooling, freezing, and blanching are used in a home kitchen. But now-a-days, food processing and preservation industries combine these techniques with other processing operations by using different technical prospects. As a subset of traditional processing technologies, modern processing technologies include hot air sterilization, vacuum cooking and pulsed electric-field technology as well as high pressure treatment, extrusion, microwave processing, and pulsed electric field technology.

    1.    Food : defined as something which is eaten / drunk by human beings or something we eat and which can be utilized by our body.

    2.    Milk and milk products like Dahi, yoghurt, paneer, cheese, Khoa etc these foods are rich sources of Vitamin A, Riboflavin and Calcium.

    3.    Meat, fish, poultry etc besides proteins these foods also provide Iron and B- complex Vitamins.

    4.    Eggs and egg products are also rich in Iron, Vitamin A and Riboflavin (B1).

    5.    Pulses, nuts and oil seeds are also a good source of thiamin, niacin, and Iron.

    6.    Strategies and measures for alleviating the world food problem require.

Storage Systems

    1.    Low cost storage technology

        ·    In situ : Means delaying the harvest until the crop is required and employed 
    for the root crops.
        ·    Sand and Coir : Used for the Potatoes
        ·    Pits used for the Potatoes
        ·    Clamps used for the Potatoes
             Wind breaks used for the Onions – 6 months 1m height wooden stakes
        ·    Cellars : under ground / partly under ground. Ex: Apples, cabbage, 
    onions and potatoes during winter.
        ·    Barns : In Sudan onions are stored in palm leaf barns called “Rakubas”.
        ·    Evaporative Coolers
        ·    Zero energy cooling chambers
        ·    Night ventilation.

    2.    As a general rule, air circulation of storage room is designed to provide about 25m² / min / 3000 K cal of refrigeration predicated on a 5.5ºC

    3.    Frozen storage refers to storage at temperature where food is maintained in frozen conditions.

    4.    Good frozen storage generally means - 18ºC / below.

    5.    Below – 9.4ºC, there is no significant growth of microorganisms in food.

    1.    Microbial Risk Assessment (MRA) can be considered a tool for use in the management of the risks posed by food borne pathogens and in the elaboration of standards for food in international trade.

    2.    MRA comprises risk assessments of particular pathogen - commodity combinations

    3.    According to codex alimentarious commission (CAC) microbial risk assessment is defined as a scientifically based process consisting of 4 components.

        ·    Hazard identification
        ·    Exposure assessment
        ·    Hazard characterization
        ·    Risk characterization

Food Processing Technology

    1.    The transition from solid to fluid and back is known as a phase transition and this is important in many types of food processing (e.g. water to water vapour in evaporation and distillation and dehydration; water to ice in freezing and freeze drying or freeze concentration or crystallisation of fats.
 
    2.    Phase transition takes place isothermally at the phase transition temperature by release or absorption of latent heat, and can be represented by a phase diagram.

    3.    A second type of transition, known as glass transition, takes place without the release or absorption of latent heat and involves the transition of a food to an amorphous glass state at its glass transition temperature.

    4.    The transition is dependent on the temperature of the food, time, and the moisture content of the food.

    5.    The density of a material is equal to its mass divided by its volume and has units of kgm^-3

1.1 Introduction

Due to the ever increasing world population, the demand for food would also increase. India is one of the largest food producer countries of the world (first in milk production, second largest in fruit and vegetable production and third largest in grains production). It is the seventh-largest country in the world, with a total land area of 3,287,263 square kilometres. India has varied climates of snow covered Himalayas, desserts, oceans, fertile plains and areas receiving the highest rainfall in the world. Name any food item; it can be grown in one or the other part of the country. All these make the production of various types of foods of plant (fruits, vegetables, cereals, pulses, oilseeds, spices etc) as well as animal origin (fish, meat, milk etc.) possible in the country. The annual production of cereals, fruits and vegetables is 260, 57 and 77 million tonnes respectively, besides this, the production of cow and buffalo milk is about 102.1 million tonnes and that of sugarcane and spices are 355.52 and 1.1 million tonnes respectively [15]. Table 1 shows that the production of various food items has increased many folds during the last five decades. On one hand, we feel proud as we produce one of the largest quantities of foods in the world and there has been an enormous rise in the production of various foods in India during the last five decades, on the other hand we should be very much worried being a leading country as far as the wastage of food in the world is concerned. The postharvest losses are huge and only meagre quantity (2%) of the food is processed. Sharma [41] very rightly said that when we do not agree to throw away Rs 4000/-per month out of a salary of Rs 10,000/-per month then why do we accept 40% postproduction losses of food in the country. This would require immediate necessary action to save a major portion of the food that has already been produced.

12.1 Introduction

Man is the most beautiful of all God’s creations and like man, his environment too is beautiful with rivers to quench his thirst with sweet water, atmosphere to provide him oxygen, land and fire to provide him food. Primitive man ate uncooked food and lived in caves. Soon he learnt the use of firewood for cooking of raw meat and provided the first instance of ‘Pollution from food processing’ in history. As man shifted from one place to another, this sort of living never polluted the environment. But as the man ascended the ladder of civiliz ation, his needs grew in arithmeti c progression but corresponding pollution grew in geometric progression. With increase in agriculture produce, a need was felt to preserve the glut production in the form of processed foods giving rise to massive development of food processing industries all over the world. The rapid industrialization of agriculture and horticulture, increased the pollution load many folds especially the biodegradable waste from food industry [41].The wineries and distilleries (distill wine to make brandy) are no exception. Nevertheless, the waste is a precious source of several useful materials as such or after fermentation [1,31,46,86]. Thus, development and environment are two sides of the same coin.

From time immemorial, the biosphere is acting as a sink for all the waste products and recycles them to make good the loss so that every generation finds it the same as one before it. But, of late, this self-cleaning and equilibrium maintenance of biosphere is disastrously disturbed as the waste produced from man’s activities is continuously exceeding the capacity to purify herself. Consequently, our biosphere is becoming more and more poisonous and days are not far away when this planet will become inhabitable.

    1.    Life blood of food companies are
        a)    Existing products    b)    New Products
        c)     New packaging material    d)     Food technologists
    2.    New Products are developed to meet
        a)    Health & Nutritional requirements
        b)    Environmental & Social requirements
        c)     Convenience & handling
        d)     All
    3.    What are the characteristics of a line extension in a variant of an established line of food products 
        a)    Little research    
        b)    Minimum manufacturing changes
        c)     No change in logistics and supply chain
        d)     All
    4.    The following one is not a characteristic of new product development through line extension
        a)    New purchasing skills
        b)    No change in logistics and supply chain
        c)     No change in storage of RM &PM
        d)     Minimum R&D

Previous Year Questions
1. How has food production, incuding  horticultural crops, changed in  India during the last one decade? Write down its impact on food and nutritional security (20 marks, CSE 2023)
2. What is the food production and consumption pattern of India in the last fifty years? (15M, CSE 2021) 
3. Describe food grain production and consumption trends in India (7.5M, CSE 2019) 
4. Food production and consumption trends in India (12.5M, CSE 2015)

Genetically modified organisms (GMOs) can be defined as organisms in which the genetic material (DNA) has been altered in a way that does not occur naturally. The technology is often called “modern biotechnology” or “gene technology”, sometimes also “recombinant DNA technology” or “genetic engineering”. It allows selected individual genes to be transferred from one organism into another, also between non-related species. Genetically modified (GM) foods are foods derived from genetically modified animals and marines. Genetically modified animals and marines are those in which specific changes introduced into their DNA by genetic engineering using a process of either Cisgenesis or Transgenesis. These techniques are much more precise than mutagenesis where animals and marines are exposed to radiation or chemicals to create a non-specific but stable change. Other techniques by which food animals can be modified are selective breeding and somaclonal variation. By this means desired quality of meat, egg and other animal products can be produced. But it is a common thinking that foods derived from genetically modified animals and marines are far from safe. They are likely to be contaminated by potent vaccines, immune regulators and growth hormones, as well as nucleic acids, viruses and bacteria that have the potential to create pathogens and to trigger cancer.

Quality Standards and Laws

Quality is how well a product or service satisfies the needs of the customer. This includes all aspects related to the needs of the customer such as quality specifications, safetgy, delivery method or date, price etc. Quality can be interpreted in several ways as conformance to the standards, meeting customers’ preference/ satisfaction for desired quality attributes, degree of excellence and zero defect products etc. Because of education and consequent greater understanding of implications of poor quality commodities in recent years, consumers have become quality conscious and this fact is also applicable to food and food products. In order to strengthen competitiveness, quality must be incorporated throughout the value added chains right from the harvesting, handling, manufacturing, processing, packaging, storage, marketing and distribution stages, especially in the case of food and food products.

Henderson et al., (2010) have studied the different aspects of food regulation. The authors have looked into the perceptions of Australian consumers’ who is and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Personal responsibility for food safety practices was also identified. Little evidence is found in the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares. According to Wood (1990) the marketing of food service program in an Ohio district is directed toward the students and also at the community, school administrators, teachers, and employees. Students are encouraged to follow a healthier way of eating.Jones (1998) studied the role of food safety in the food chain from farm to fork. In response to growing threat of food-borne illnesses the federal government had launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Point’s system (HACCP). Under this it has been designed to make everyone in the food-delivery chain to be responsible for ensuring a safe food supply.

Over the past several years, there has been significant change in consumer perception on quality and food safety. Consumers are demanding healthy, nutritious and cost-effective products processed under controlled hygienic conditions. Food safety concern, in recent years, has become dominant and important. The requirement of food safety and quality assurance has never been so demanding as it is now. Globally food safety is being addressed independent of food quality. In anticipation of consumer demands on food safety, food sanitary standards at national and international levels are under constant review. Several inter governmental agencies / organizations are engaged in work related to quality assurance and food safety. Amongst these World Health Organization (WHO) and Codex Alimentarius Commission (CAC) play the major role in protecting public health and defining standards of quality and safety aspects of foods for regional and or world wide usage.

Regulatory Institutions

The quality environment in the Indian food processing sector revolves around compulsory legislation which specify minimum standard and certification system. Legal standards are generally made to have control over the quality of foods offered for sale and to safeguard the consumer from health hazards posed by practice of adulteration. There are basically three types of Indian standards namely

Over the past several years, there has been significant change in consumer perception on quality and food safety. Consumers are demanding healthy, nutritious and cost-effective products processed under controlled hygienic conditions. Food safety concern, in recent years, has become dominant and important. The requirement of food safety and quality assurance has never been so demanding as it is now. Globally food safety is being addressed independent of food quality. In anticipation of consumer demands on food safety, food sanitary standards at national and international levels are under constant review. Several inter governmental agencies/organizations are engaged in work related to quality assurance and food safety. Amongst these World Health Organization (WHO) and Codex Alimentarius Commission (CAC) play the major role in protecting public health and defining standards of quality and safety aspects of foods for regional and or world wide usage.

Introduction

Increased awareness about the food safety and various adulterations or crises reported in food industries, the food quality and its safety has emerged as the most important features of the modern food processing and preservation. The important historical dynamics which raised the concerns of food safety were motivated by accidents related to food borne pathogens and chemical contamination during the food processing and distributions. Many times, the terms food quality and safety are interchanged however, there is a difference in terms of their perception by the consumers and manufactures. In past few years, the food safety has become the characteristic of food quality and has been regulated by various national and international agencies. The increased concerns about the safe, nutritious and high quality food has over the time forced the public authorities to engage the food industries to construct the quality management systems in order to improve the food safety and build the consumers believe and trust towards processed foods. Food quality is a broader concept which includes food health quality attributes along with parameters like sensory characteristics like taste, smell and convenience like food preparation (Röhr et al., 2005). The food qualities like nutritional, convenience and sensory are not requested by the public laws but are desired by the consumers. The management systems for the quality assurance have evolved over the time and now we have systems like HACCP. ISO 9000 and ISO 14000 in place which are well known quality management modules to ensure the elimination of food hazards. On a broader scale of trading food several technical agreements under WTO (world trade organization) have been made which provide equal opportunities to all countries to trade the goods however, it imposes the similar food quality standards across all the participatory members. The responsibility of food safety is directly connected with all the stakeholders of the food chain which include manufactures, processors, farmers, food handlers and finally the consumers. Food contaminations may be a result of poor manufacturing practices and poor storage and handling practices at any stage in the food chain. To ensure the safety compliances, national food regulatory models plays a significant role. The guidelines issued by FAO/WHO, 2003 are focused on the public organizations, as well as food control authority self-assessment to ensure highest food quality and its safety from farm to fork. The base of the assessment includes 6 factors viz. food inspection, food quality management, food safety, official food control laboratories, food legislation food and quality information, education and communication (Shukla et al., 2014).For effective implementation of the food safety and quality module the countries have developed various food laws and legal norms which states the principles to be followed for raw materials, their processing and distribution in order to achieve the consumer expectations as well as the hidden food safety concerns.

Hazard Analysis and Critical Control Point (HACCP) System

1. Identify hazards
 
 It is important to be able to identify the possible microbiological, chemical and physical hazards that can occur at every stage of the food business – from growth, processing, manufacture, storage and distribution, until the point where it is sold to the customer and eaten.

    ·    Microbiological Hazards : Any bacterium, virus, or protozoan that is capable of causing illness and that grows or may be carried on food. Well-known examples of bacteria are Campylobacter, Listeria and Salmonella. The most likely food-borne viruses are the Norwalk type viruses. Giardia is an example of a protozoan that may be food borne. It is important to have some understanding of the risks associated with different types of microbiological hazards.

    ·    Chemical Hazards : Examples include excessive or toxic amounts of heavy metals, chemicals, pesticides, herbicides, insecticides, vitamins, minerals, preservatives, disinfectants, detergents and cleaning compounds. Some hazards may be naturally present such as in green potatoes or taro and rhubarb leaves.

    ·    Physical Hazards : Objects that get into food, or are already present in food, may cause illness, injury or distress to the person eating it. Some examples are glass, metal fragments etc. Other contaminants such as hair or insects may be offensive but not necessarily a danger to health. They should nonetheless be considered and controlled

India is emerging as a food power in the international trade of foods. The immense un-tapped potential in the food processing sector in India has to be still exploited. It has been termed as ‘sun rise industry’ for improving agricultural productivity and enhancing food availability. The terms food quality management and food safety have assumed large dimensions today. In the international trade of foods, specifications have been laid down on the levels of harmful substances (chemical or biological origin), protocols have been documented on their detection and quantification in foods. We have to meet these international standards to export processed food and earn foreign exchange. The future of Indian food processing sector is bright provided it improves the quality of its products as per international standards.

Introduction

Food and water safety is a public health concern. “It is health that is real wealth and not pieces of gold and silver” is a famous quote by Mahatma Gandhi. To provide good health and to maintain it properly for all citizens, the country need to assure the quality and safety of food consumed by it's population (Attrey, 2016). Apart from nutrition and taste, a more important part of food is the safety standards during manufacture, storage, distribution, sale and import. Food safety is particularly important in India, where an inordinately high percentage of population suffer from malnutrition and food borne diseases (Bahuguna, 2016). Food borne diseases in India have increased the frequency of mortality and morbidity. Around 5.82 crore cases of food borne diseases and 3.51 lakh food associated deaths were reported in 2010. Nowadays the consumption of unsafe food is being considered as an alarming threat to the growing global food markets. Adulteration and synthetic milk in India, powdered infant formula with melamine in China and adulteration of beef in Europe are a few examples. These issues can be resolved to a great extent, through appropriate food laws and policies. A country should not only possess appropriate statutory, regulatory legislations, policies in place for the su-pply of safe and good quality food at all times, but also should assure that the same is imple-mented seriously (Attrey, 2017).

Apart from health, food safety is vital for economic growth and progress as well. In India, the food processing industry holds tremendous opportunity. It has high employment potential, can boost exports of agro-products out of the country and also provide better returns to farmers for their produce. The concept of food quality and food laws is not totally new in India because food was considered an important aspect of healthy living even in ancient India. India took an important step towards building a safe food culture a decade ago by enacting the Food Safety and Standards (FSS) Act. In one stroke, it brought about a paradigm shift in the way we look at food safety regulations in India. Food Safety and Standards Authority of India (FSSAI) are mandated under Food Safety and Standards Act 2006 to protect people from this threat. In its role of a food regulator, FSSAI can be proud that it touches the lives of each of the 1.3 billion people in the country. More than just reaching the people, the watchful eye of FSSAI is assuring them that the food they get in any form, raw or processed is safe to consume (Agarwal, 2016).

Food Safety and Standards Rules and Regulations-2009

    1.    The Food Safety and Standards Act, 2006 has been passed by the Parliament with the intention to integrate all present food laws into one and to have a single regulatory body.

    2.    Accordingly the Food Safety and Standards Authority of India (FSSAI) has been established under the Food Safety and Standards Act, 2006 (FSS Act, 2006) with the mandate to lay down science based standards for articles of food and to regulate their manufacture, storage, distribution, sale and import, to ensure availability of safe and wholesome food for human consumption.

    3.    In exercise of the powers conferred by section 91 of the Food Safety and Standards Act, 2006 (34 of 2006), the Central Government hereby makes the rules and regulations.

    4.    ‘‘Anti-oxidant’’ means a substance which when added to food retards or prevents oxidative deterioration of food and does not include sugar, cereal, oils, flours, herbs and spices.

History of food safety starts with knowledge about food hazards. The term “safe food” can be defined from different angles since the end users are highly heterogeneous. However, the accumulating data and day by day emerging information aboutfood borne diseaseslead to a boom in public awareness about food safety. Food safety can be defined as “The strategies and activities aimed to protect foods from biological, chemical, physical, and allergenic hazards that may occur during all stages of production, distribution, and consumption” (Paperella, 2020). According to the World Health Organization (WHO), unsafe food,which contains hazardousmicroorganisms or chemicals, causesmore than 200 ailments, ranging from diarrhoea to malignancies among which diarrhoea is common. 

Introduction

Milk, an integral component of our staple diet is nature's most ideal and complete food. There is a long history and tradition of high consumption of dairy products in India. Consumption pattern of dairy products in India is quite unique and is centred on traditional products; however, novel products are gradually gaining momentum in urban areas. Despite being the largest milk producing country in the world, India accounts for a negligible share in the worldwide dairy trade. Domestic demand for dairy products is showing an increasing trend and it is expected that demand-supply gap will further widen which might transform India being a net importer of dairy products. The domestic demand for dairy products is showing an increasing trend and it is expected that demand-supply gap will get further widened. India, world’s largest milk producer has enough scope for diversified value addition as this can definitely assure a better margin of profit. However, for this, one has to maintain reputation and competitiveness in the market. To emerge as a leader in this competitive global market, continuous improvement of quality is highly essential. Safety, just as the other side of the coin is also of utmost importance to reinforce consumer confidence. Nowadays, quality is not a matter of choice but a necessity and even a responsibility of all stake holders. In the case of food, the term, 'Quality' refers to physical, chemical, microbiological, technological, economic and aesthetic characteristics. From consumer point of view, the word, 'Quality' embraces mostly the organoleptic characteristics like body, texture and flavour than the objective properties like fat, protein, lactose and acidity as determined by science based tests.

Introduction

A wide range of agricultural pesticides is currently being used in India. In the financial year of 2015, the size of the crop protection market in India was of about $4.5 billion (FICCI, 2016). A large number of these pesticides are also being used in considerable quantity on horticultural crops, including fruit crops. In general, judicious application of a pesticide following Good Agricultural Practices (GAP) does not leave its residues in crop produces above unacceptable limit. But the GAP recommendations are not available for all crop-pesticide combinations. The usage pattern of pesticides also sometimes gets modified at farm level due to sudden climate changes, and under such situations, the indiscriminate use of pesticides to combat disease and insect complex might result in the contamination of pesticides in fruits.

Food is a resource of immense importance and its safety in the whole production and supply chain, is very crucial. In the last century, drastic increase in the incidence of food borne illnesses, large-scale food poisoning outbreaks and surfacing of new foodborne pathogens and hazards were widely reported. Contaminants can enter food through various pathways in the food production process, and can occur naturally or as the result of inferior or inadequate production practices. Concerns on food safety are fuelled by the industrialization of agricultural production, liberalization of trade, tourism, food consumption pattern and food preparation practices. The availability of information through the mass and social media increases the number of reported cases of inadequate food safety. International competitiveness depends more on quality and safety concerns than on prices and this creates a need for safer food production and distribution practices.

Growing population has increased the demand on food supply. Providing safe and hygienic food to the population is an essential consideration. Food safety systems and tools need to be in place to assure safe food, until which the food businesses would not flourish or be able to build their reputation. Food safety systems and management tools are important as they assist food business organizations to build confidence in people regarding food safety.

Cooking oil when heated there will be some changes like its colour, flavour, smoke formation etc. One change is the change in total polar compounds (TPC). TPC is used to measure the quality of oil. The TPC value increases with the reheating of oil, higher TPC value means the oil having high contain of peroxide and hydro peroxide. FSSAI fixed the value of TPC at 25%, beyond of this value the cooking oil can causes health issues like hypertension, atherosclerosis, Alzheimer’s disease , liver disease even liver cancer.

Food safety is a discipline ensuring safe consumption of food without any injuries to human health. It is multifaceted and influenced by various factors including, food processing, handling and practices, consumer demand and their knowledge, globalization of world food trade, changes in food consumption pattern (Chen et al., 2020).

Previous Year Questions

1. CS 2015: Discuss the impact of rapid increase in population on food and agriculture (12.5 marks)

What is Food security?

The Food and Agricultural Organization (FAO) – “when all people at all times have physical and economic access to sufficient, safe and nutritious food to meet their dietary needs and food preferences for an active and healthy life”.

It has Following Dimensions

• Availability: It means food production within the country, food imports and the stock stored in government granaries.

Food is a complex system of inorganic and organic compounds. These compounds are present in food in unique combination and uniquely organized structures, and therefore, every type of food has unique characteristics, nutritive value, sensory quality, texture, etc. Food items are always in physical, chemical and biological dynamics, however rate of change vary from food to food. Those highly perishable in nature undergo faster rate of spoilage as compare to those semi-perishable or stable. Foods are affected by nearly every variable of environment. Heat, cold, light or other radiations, oxygen, moisture/dryness, natural food enzymes, microorganisms, macro-organisms, industrials and agricultural contaminants, time, etc. - all adversely affect the foods resulting to its spoilage or deterioration. Spoilage may be referred to the losses in nutritive value, sensory desirability, safety and aesthetic appeal to the unacceptable level. Level of unacceptability is the subject of socio-economic status and policies of the state. A food which is of unacceptable quality for one society may be of acceptable quality for other society.

History reveals that food was the root cause of many wars and also the battles were won or lost over food spoilage and its control. Wars and the need to provide safe food to armies in the region far away from the areas of their production have always focused attention on the problem of food spoilage, and this valid today even. Some of the most important advancements in the technology of food preservation were made during the war-time. Of these, most important was the technology of preventing food from spoilage for months together developed by French scientist Nicolas Appert for French army. He won awarded money of 12,000 Francs in 1908 for this. The World learnt the art of canning foods in which the food is packed in a sealed metal container and heated sufficiently. He, however, could not explain the principle behind the preservation by canning. Some 50 years later, work of Louis Pasteur explained that the growth of microorganisms was the major cause of food spoilage which are killed in Appert’s method of preservation.

After harvesting the quality of fruits and vegetables begins to diminish and products is edible for only a limited time then products begin to spoil or rot. Losses occur during harvesting and handling of fruits and vegetables can be minimized by proper techniques but processed food spoilage is bit difficult to control and stop after infection and contamination of microorganism.

Spoilage

Spoilage is deteriorative process which results reduction in quality of food (fruits and vegetables) which become inedible. The changes in food that cause it to lose its desired quality and eventually become inedible is called food spoilage or rotting. After harvesting, the quality of fruits and vegetables begins to diminish and product is edible for only a limited time. The deterioration and spoilage of fruits and vegetables may occur at different ways.

The losses in harvested products begin immediately after detachment of products from their parental plants. After some time, theses products begin to spoil or rot. Spoilage can be defined as the deteriorative process which renders the food inedible or results in reduction in quality. Spoilage of fresh fruits and vegetables usually occurs during storage, transportation and during processing. They also get contaminated with spoilage organisms either from each other or from the containers. Mechanical injuries during harvesting and transportation further aggravates the deterioration process.

Food is essential for human survival. It provides the required energy and vital nutrients for sustainable growth and development. With the increase in population and awareness, the demand for nutritious, fresh and healthy food also increases. Although adequate food is produced in order to meet the increased demands, it fails to reach the consumers in need due to food Food Storage and Preservation Practices   35 wastage and spoilage occurring during various stages of harvesting, food production, storage and transportation. Gajanana et al., (2009) stated that there is a mammoth wastage of food post-harvest. It is estimated that 20 to 60 % of produce are wasted during and after post-harvest. 

Importance of Food Storage

Food storage is both a traditional domestic skill and is important industrially. Food is stored by almost every human society and by many animals. Storing of food has several main purposes:

•Storage of harvested and processed plant and animal food products for distribution to consumers

•Enabling a better balanced diet throughout the year

•Reducing kitchen waste by preserving unused or uneaten food for later use

•Preserving pantry food, such as spices or dry ingredients like rice and flour, for eventual use in cooking

•Preparedness for catastrophes, emergencies and periods of food scarcity or famine

•Religious reasons (Example: LDS Church leaders instruct church members to store food)

•Protection from animals or theft

Introduction

    1.    Food Science is the application of the physical, biological and behavioral science to the processing and marketing of foods (Margaret, 1968).

    2.    Technology can be defined as the science dealing with knowledge of doing things efficiently and effectively.

    3.    Food science helps us understand the theory example: what methods can best be used to store and preserve food to maintain quality and prevent spoilage.

    4.    Food technology demonstrates how the food is stored, preserved, processed and transported and has been responsible for development of new techniques for processing and preservation of food on a commercial scale and for packaging it in such a way that it can be sold conveniently.

    5.    Food science deals with the study of facts of the physical, chemical and biological sciences as they influence the processing and preservation of food.

    6.    Food technology deals with engineering and other scientific and technical problems involved in transforming edible raw materials and other ingredients into safe, nutritious and appetizing food products (Desrosier, 1977).

    7.    Food science is concerned with basic scientific facts about food, where as food technology concerned with the processing of raw materials into foods that meet human needs and wants.

    8.    Indian agriculture has undergone a sea change during the past half a century. Starting with the campaign for “grow more foods” in the forties, India reached self sufficiency during the eighties.

The proximate system of analysis consists of the analytical determinations of water (moisture), ash, crude fat (ether extract), crude protein and crude fibre. Nitrogen-free extract (NFE), more or less representing sugars and starches, is calculated by difference rather than measured by analysis.

Water

1. Water constitutes about 70 percent of an adult’s body weight and water (moisture) is the predominant constituent in many foods.
2. All foods contain varying amounts of water in the range of 20 to 90%.
3. The hypothalamus is a brain center that controls activities such as maintenance of water balance, regulation of body temperature, and control of appetite.
4. Moisture content of some foods

SYNOPSIS

There have been conflicting practices, recommendations regarding a healthy diet in human beings. Unscientific food habits are limitation to good health and active life. Because of various social, cultural, religious and economic factors human beings in the same climatic conditions and living situations, have been practicing different food habits leading to many health problems. What to eat, how much to eat and when to eat are not clear with the masses. This paper attempts to throw light on these aspects.

Introduction

Food adulteration compromises quality of foods and causes human health hazards is a menace mankind had been facing since ages. Spice adulteration scandals in the year 2004, Horse gate scandal in Europe during 2013 are famous examples of food fraud. Various forms of food adulteration and cheating such as substitution of cheaper food components in place of original product, addition of non-permitted substances, and false claims by misbranding or mislabeling are prevalent from time immemorial (Spink et al 2019).

1. General

In this the nature of objectives of the enterprise i.e. setting up a dairy farm, details of proposed investments, specification of the project area, name of the financing bank branch, status of beneficiary: (Individual/Partnership/Company/Corporation/Co-operative Society / Others) details of borrowers profile in terms of capability, experience, financial soundness, technical / other special qualifications are mentioned.

2. Technical Aspects

    a)    Location, Land and Land Development: This involves the site details of the proposed project. The total land area and its cost. Also, particulars of land development such as fencing, boundary wall, gates are mentioned in it. Thus, site map is also mentioned in this subheading.

    b)    Civil Structures: Several structures like sheds, milking room, store room, quarters for dairy farm manager / labourers are also to be constructed. So, their measurements as well as approximate costs need to be mentioned.

Formulation of meat and sea food products requires various ingredients which are commonly known as food additives. Food additives are those non-meat ingredients which are used to enhance colour, flavour, aroma and texture of the meat and sea food products. These food products can fulfil the demand of modern consumers. As per the definition of Food and Drug Administration (FDA) food additives are those substance which are used to provide a technical effect in foods. The use of food additives has become more prominent in recent years, due to the increased production of prepared, processed, and convenience foods. Additives are used for flavour and appeal, food preparation and processing, freshness, and safety. These additives can be classified as curing ingredients, extenders and binders, flavour enhancers and other additives. For the formulation of different products both raw materials and ingredients should be of food grade and sound hygienic strength. In the starting of this chapter we will discuss about ingredients used then the specific formulations will be discussed for better understanding of meat and sea food processing.

Curing Ingredients

Curing agents such as salt, phosphate, sugars, nitrite and nitrate, sodium ascorbate and erythorbate etc. have traditionally been used in various meat formulations from long back. The details of these ingredients have already been discussed in chapter-8 of this book. So we will try to discuss other ingredients which are relevant for meat and sea food products other than these ingredients. Cure accelerators such as ascorbates and erythorbates are used to speed the curing process. They also stabilize the colour of the final product. The examples are ascorbic acid, erythorbic acid, sodium erythorbate, citric acid, sodium citrate, sodium acid pyrophosphate, glucono delta lactone (GDL) etc. Glucono-delta-lactone (GDL) acts as a curing accelerator in meat and meat products. It is permissible up to 1% in sausages and up to this level it lowers the pH about 0.5 thus inhibits the growth of spoilage micro-organisms. GDL also facilitate the cured colour development.

The word biscuit is derived from Danis biscoctus which is Latin for twice cooked bread and refers to bread rusks that were made for mariners (ships biscuits) since the Middle Ages. The dough pieces were baked and then dried out in another cooler oven. All biscuits are made with flour (usually wheat flour) and all have low moisture content and thereby have long shelf life if protected from moisture and oxygen. It includes items also known as crackers (that make a noise of cracking when broken), Hard sweet and semi –sweet biscuits, cookies (which is the name that originated from Dutch word koekje meaning a small cake) and wafers, which are baked between hot plates from a fluid batter. The name cookie was adopted in North America where the term ‘biscuit’ can be confused with small soda raised breads or muffins. In other countries the term cookie is used primarily for wire cut products of rather rough shape, which often contain large pieces of various ingredients such as nuts, etc. The term ‘biscuit’ is used in Britain to describe a flat, crisp, baked product; the term cookie is reserved for something softer and thicker. Cookies are made from soft wheat flour and are characterized by formula high in sugar and shortening and relatively low in water. Similar product is known as biscuit in our country. In USA the term ‘cookie’ covers any flat, crisp, baked good. Cracker is a term reserved for biscuit of low sugar and fat content, frequent bland or savoury. Crackers are usually made from developed dough whereas cookies are made from weaker flour. These foods have in common their ability to stay palatable for a long period of time. Their ease of transportation and their ready consumption without any further preparation make them high on the list of staple snacks

All bread is made by baking a dough that has two basic ingredients, flour or meal and a liquid. Bakers can use a wide variety of both components. The most common type of flour used for bread and most other baked goods is made from wheat. Wheat flour has a pleasant taste and contains a large amount of an elastic protein substance called gluten. Gluten aids in baking uniformly light bread that rises (swells) properly. Other baking flours are made from barley, rye, corn, rice, oats, soybeans, and potatoes. These flours, particularly soybean flour, may equal wheat nutritionally, but none can match wheat for creating light, even-textured bread. Hard wheat flour makes lighter bread than does soft wheat flour because it is richer in gluten. Rye and whole wheat breads are made lighter by adding white flour. The liquids used in baking include water, sweet or sour milk, yogurt, wine, and beer.

Bread is either leavened or unleavened. Leavened breads contain some substance that produces bubbles of carbon-dioxide gas. These gas bubbles inflate the dough, causing it to rise and become light and porous. Most kinds of basic breads are leavened with a fungus called yeast. Biscuits, muffins, and cakes and other pastries are leavened with either baking powder or baking soda. Unleavened bread is dry and hard. Familiar kinds of unleavened breads include water crackers, the rye crisp of Sweden, and Jewish matzoth. Whether leavened or unleavened, most breads contain other ingredients in addition to flour and a liquid. An almost limitless variety of breads can be made by adding a sweetener, shortening, cheese, eggs, meat, fruit, vegetables, seeds, or nuts. A sweetener, either sugar or syrup, is used in almost all bread for its taste or as an aid to yeast growth. Bread may also have an external sweetener in the form of a decorative glaze. The high fat content of shortening and cheese increase tenderness and flakiness in bread. Perhaps the best example is the French croissant. Eggs help leaven bread dough by adding to the bread’s lightness. They can be brushed on top of the dough before baking to create a shiny crust, as in the Jewish hallah. Some breads from many nations contain fruit, a vegetable, meat, seeds, or nuts. Examples include the fruit scone of Great Britain, the spinach paratha of India, the Southern sausage bread of the United States, the Easter sesame bread of Greece, and the almond sweet bread of Finland.

Cakes are sweet baked products characterized by high level of sugar in the formulation and hence are foods of high calorific value. Among the various ingredient used flour, sugar, shortening and egg are the essential ingredients for cake manufacture. The optional ingredients are baking powder, milk, fruit etc. For cake manufacture the selection of ingredients is of paramount importance.

INTRODUCTION

Many people confuse fortification with the term enrichment. There is a big difference in between these two terms. Fortification means the addition of those ingredients not normally found in a food and it is added to achieve a particular dietary purpose. Lysine may be added to corn products to increase the biological value of the protein. Salt may be iodised to prevent the occurrence of goiter. Breakfast cereals may be fortified with an array of vitamins and minerals to ensure a completely balanced nutritional meal.

In enrichment, the amounts added are designed to meet specific legal standards of minimum and maximum levels of nutrients. It is recognised that in the processing of cereal products that the removal of bran and germ causes a large portion of the vitamins and minerals naturally found in the product to be lost. During World War II an effort was made to correct this deficiency by government endorsement of the enrichment of bread, flour, and cornmeal. Wheat flour, cornmeal, corn grits, bread, ready to eat and uncooked cereals, and macroni products have been enriched with thiamine, ribo-flavin, niacin, iron and in some cases, calcium and vitamin D.

W.H.O. has defined food fortification as “a process where by nutrients are added to foods to maintain or improve the quality of the diet of a group, community or population”.

Food fortification is the procedure in which micronutrients (essential trace elements and vitamins) are added to the food. As a public health policy fortification can be carried out by the food manufacturers or by the governments to help people in combatting dietary deficiencies within a population. Fortification can be done in food even if these nutrients are originally present or not. However, it improves the nutritional status of a population by overcoming the deficiencies of micronutrients. Deficiency of micronutrients is known as hidden hunger which is a serious health risk. Access to safe and nutritious food is a must.Due to the lack of consumption of a balanced diet, adequate micronutrients are not supplied to the body. Therefore, there is a considerable loss of nutrients during the processing of food. One of the strategies to address this problem is fortification of food.

1. Introduction Millets, including foxtail millet (Setaria italica), are gaining popularity as “smart foods” due to their numerous benefits for the planet, consumers, and farmers (Anitha et al., 2021). Foxtail millet, classified as a major millet, belongs to the genus Setaria in the Poaceae family. It has a rich history, with archaeological remains dating back 7400-7935 years in northern China and cultivation in Europe around 4000 years ago (Lu et al., 2009). Foxtail millet is currently cultivated in 26 countries and stands as the secondhighest cultivated millet globally. It is a relatively short plant, growing up to 2-5 feet tall, and demonstrates high resistance to various stresses, both biotic and abiotic(Sharma and Niranjan, 2018). The crop’s short generation cycle of 5-8 weeks from planting to flowering, followed by 8-15 weeks to attain seed maturity, allows for harvesting within 75-90 days after plantation. Foxtail millet produces hundreds of seeds per inflorescence (Li et al., 2020).

1.1 Introduction Millets are the most ancient grains that have been cultivated since time immemorial and consumed as food, feed and pastures. Millets are considered nutraceuticals’ since they possess significantly higher nutritional qualities compared to other cereals. Millets are grown across the world for grains and human food due to their nutritional advantages and ability to withstand adversities. Millets are preferred over other grains due to their short life cycle, low input requirement and ensured production with in-built genetic tolerance for abiotic stresses. Major millets include Pearl millet (Pennisetum glaucum L.) and sorghum (Sorghum bicolor L.), while there are numerous minor millets classified as small millets. With an extent of over 0.87 lakh ha and a production of 0.66 kg ha-1, India is the world leader in small millet production (Maitra and Shankar, 2019). Small millets are primarily grown on rainfed uplands in arid and semi-arid climates with sub-optimal management. Following the green revolution due to extreme demands for food, the main focus in India was on the production of fine cereals mainly rice and wheat to overcome hunger and poverty, while millets became ignored grains. Furthermore, urbanization, increased affluence and dietary changes relegated millets to the status of poor man’s food. However, due to a re-evaluation of nutritious characteristics, millets have recently regained their lost prestige (Maitra, 2020).

Fraudulent substitution of meat is the adulteration or mixing of the inferior or cheaper quality meat into superior quality meat. The first case of fraudulent substitution was recorded in thirteenth century A.D. at Florence in Italy. A common fraud in the meat industry in which uninspected meat is substituted for meat that has undergone inspection and been branded as satisfactory. The other frauds are the substitution of meat of another species, e.g. horse for beef especially in Britain and Ireland, beef in kangaroo meat in Australia, cat for chicken or rabbit, goat meat for mutton, mutton for venison, dog meat and cat meat for chevon in other countries including India. As per an estimate about 25-30% of meat sold in India is adulterated. These practices are more common in comminuted meat products. These illegal practices are punishable under PFA act 1955. The choice of method to be applied is depend on the need or condition of meat recovered.

Food preservation methods are important in order to avoid glut or shortage of food in the market. In addition it helps to increase the shelf life, maintain the nutritional and sensorial quality, facilitate transportation and improve the overall value of the commodity. Even though various methods of food preservation are available now. Most of the conventional methods are thermal preservation methods which may result in the loss of volatile nutrients and flavour, different sensorial modifications, microbial spread with or without gas production, damage to the microstructure, rupture of coating or packaging surfaces and microbial recontamination caused by non-hermetic closure.

Abstract

Drying is a widely used method of food preservation. It leads to some structural changes in the dried material resulting in poor quality and rehydration. Freeze drying, though a costly process, reduces water activity without exposing the food material to high temperatures, eventually retains the original quality to a great deal. Moisture in the foods is frozen to ice which is sublimated under low pressure. Low pressure helps to vaporise the ice without transforming it to liquid, hence leaving the food structure porous in nature. The food is claimed to preserve the nutritional, sensory and re-constitutional qualities.

1.1 INTRODUCTION

Most food materials are composed of a very high percentage of water, which can be as high as 95%, and this makes them susceptible to microbial activity. Microbial activity spoils the products, leaving them useless for human consumption. It not only changes their taste and color but it may also develop toxins, thus making them unsafe. There are various methods for preserving food but in order to make them shelf stable, removing water from foods helps keep them from spoiling for a longer period of time.

Introduction
Freezing is one of the oldest and most widely used methods of food preservation, which allows the preservation of taste, texture, and nutritional quality in foods better than any other methods. The freezing process is a combination of the beneficial effects of low temperatures at which micro-organisms cannot grow, chemical reactions are reduced, and cellular metabolic reactions are delayed. Freezing is generally referred to as a unit operation in which the temperature of food is reduced below the freezing point and a proportion of water undergoes a change in state to form ice crystals. Immobilization of water to ice and the resulting concentration of dissolved solutes in unfrozen water cause a lowering of water activity of the food. Thus, reduction in water activity and use of low temperatures coupled with some pre-treatments like blanching is the basis for food preservation by freezing. Fruits such as strawberries, oranges, raspberries, black currants, and vegetables like green peas, green beans, sweet corn, spinach, carrots, sprouts, and potatoes are examples of commercially frozen fruits and vegetables.
The frozen food market is one of the largest and most dynamic sectors o the food industry. Despite considerable competition between the frozen food industry and other sectors, large quantities of frozen foods are being consumed all over the world. The frozen vegetable industry mostly grew after the development of scientific methods for blanching and processing in the 1940s. The commercialization history of frozen fruits is older than frozen vegetables. The commercial freezing of small fruits and berries began in the eastern part ofthe United States in about 1905.

Freezing is one of the most critical stages in ice cream manufacture because it creates the frozen structure while simultaneously incorporating air. This chapter explains the principles of dynamic freezing and the structural changes that occur as the mix is transformed into semi-frozen ice cream. It discusses ice-crystal formation, air incorporation, overrun, draw temperature, fat destabilization, and product condition at freezer draw. Different freezer systems and hardening requirements are examined, along with calculations related to output and overrun. The chapter also introduces ingredient feeders and ripple or ribbon systems. Understanding freezing technology is essential for controlling texture, body, meltdown, yield, and overall product quality.