eChapters

1. Introduction Millet is a heterogeneous group of small-seeded cereal crops classified based on their morphology as major millet and minor millet. Little millet (Panicum sumatrense) are small millets generally categorized as minor millet cereal crops. It is a self-pollinated crop that belongs to the family Poaceae and subfamily Panicoideae with a chromosome number of 2n=36 (Nandini and Bhat, 2019). It is a traditional cereal grain crop widely produced in India, Pakistan, Sri Lanka and Western Myanmar. Little millet is widely cultivated in the tribal belt of Madhya Pradesh, Bihar, Chhattisgarh, Andhra Pradesh, and Tamil Nadu in India for food and feed (Ganapathy, 2017). Indigenously, it is commonly known as samai (Tamil), kutki (Hindi), savior same (Kannada), chama (Malayalam) (Table 1).

1.1 Introduction Millets are nutri-cereals that have been the oldest food since time immemorial and are decisively the first cereal grain to be used for domestic purposes. Millets generally include small seeded members of the Poaceae family globally used for food and fodder purposes. The word “millet” emanated from the French word “Mile” which means “thousand” signifying that a small quantity of millet may contain thousands of grains. Millets were erstwhile produced in marginal or degraded terrains with very low soil nutrients and semi-arid conditions with very little rainfall. After the green revolution, there was a shift away from millet in favour of wheat, rice, and maize as a result of more land becoming irrigated to alleviate extreme poverty and malnourishment in the country and to feed millions. Most of the millet crops possess the C4 photosynthetic pathway and are therefore able to withstand frequent changes due to environmental stresses. Consequently, millet production has declined and within a few decades post-green revolution, crops that were once eaten by every household were transformed into fodder crops. Millets are considered as ‘good for the planet crops’ as they take less to give more, due to such multi-faceted qualities millets are considered as miracle crops.

Dairy rearing is central to livelihoods and survival of millions of people of India. It is estimated that approximately 100 million people derive their live hood from dairy rearing as primary or secondary source of income. Dairy related activities help to maintain regular in flow of income for these households. Small farmers in India generate nearly half of their income from dairy and the value of cattle represents a significant part of their wealth, so the death of cattle poses a significant risk and affects farmers’ net worth and income.

a. Type of risks to dairy based livelihoods

Large animal’s are expensive and thus carry higher risk exposure. Dairy losses due to the disease, accident, theft, natural calamity can cause significant losses to these household. Sometimes owners are forced to sell their animals due to loss due to incurable disease/ disorder/ fodder and water scarcity and they are unable to rebuild their stock. Many times animal losses force them into poverty trap from where they are unable to recover.

Risks faced by dairy owner’s dairy dependent livelihoods can be classified into two broad categories

1. Introduction

Livestock meat and fish are rich sources of high-quality protein and other valuable nutrients such as polyunsaturated fatty acids, vitamins, and minerals and are an essential part of our healthy diet (Vladau et al., 2008; Mahmud et al., 2018; Mohanti et al., 2019; Mei et al., 2019). Food fraud and adulteration is an age-old distortive practice. The rising incidence of food contaminants and adulterants-induced health issues has challenged consumers to identify and consume safe livestock meat and fish products. Its significance has increased in recent years due to global trade, awareness among consumers, and sociopolitical issues.

1. INTRODUCTION

According to the Food, Drug and Cosmetic Act (1968) food is “an article that provides taste, aroma or nutritive value”. The term 'health food' is generally used to describe foods that are considered to be beneficial to health beyond a normal diet required for human nutrition. Though, the term is not precisely defined by any regulatory agencies such as the US Food and Drug Administration (FDA) however, “Health food” is sometimes used as an umbrella term encompassing natural foods, organic foods, whole foods, and sometimes dietary supplements or may also refer to functional foods. The use of foods for promoting health and relieving symptoms is as old as the practice of phyto-medicine for treating or preventing various types of illness and have been documented in Hippocratic and Vedic texts and the canons of Traditional Chinese Medicine. Therefore, “Let food be thy medicine and medicine be thy food”, quoted by Hippocrates about 2,500 years ago, is certainly the tenet of today which is receiving overwhelming interest. In the recent years, rapid urbanization, industrialization, increase in per capita income etc. in developing countries like India, have resulted in dramatic lifestyle changes leading to lifestyle related diseases like coronary heart disease, obesity, diabetes, cancer and hypertension. The transition from a traditional to modern lifestyle, consumption of diets rich in fat and calories combined with a high level of mental stress has compounded the problem further.

The nutritional richness and the high biological value of dairy milk have made it an important constituent of the balanced human diet. It is associated with better growth, improved status of some micronutrients, cognitive performance, motor development and activity. It is composed of a mixture of nutritive components as well as other bioactive factors such as biogenic amines, conjugated linoleic acid (CLA), with relevant physiological benefits. The consumption of dairy milk and products exert a protective action in human health and have been confirmed in preventing several chronic conditions like cardiovascular diseases (CVDs), some forms of cancer, obesity, immunomodulation and diabetes (Pereira, 2014). The chemical composition of bovine milk consists of 87% water, 4% to 5% lactose, 3% protein, 3% to 4% fat, 0.8% minerals, and 0.1% vitamins (Pereira, 2014).

1. Composition of Milk Fat

Bovine milk contains about 3.5 to 5% total lipid, existing as emulsified globules 2 to 4 μm in diameter and coated with a membrane, casein. The composition of milk fat is somewhat complex. Triglycerides constitute approximately 98% of milk fat, which is found in the milk globule, with the remainder being made up of di- and monoglycerides, phospholipids, cerebrosides, cholesterol, vitamins, tocopherols, carotene, and flavor components. Phospholipids are about 0.5 to 1% of total lipids, and sterols are 0.2 to 0.5%. These are mostly located in the milk fat globule membrane (Jensen et al., 1991). Cholesterol is the major sterol at 10 to 20 mg/dL.

INTRODUCTION

Food is the basic need of human beings. It gets spoiled primarily due to microorganisms and enzymes. Energy is required for microbial growth and enzymatic reactions. At low temperature, the rate of biochemical reactions is slow resulting in prolonged storage life of food. It must have been observed long back that food could be stored for longer period without deterioration during the winter months. Since then this principle is being used to extend the storage life of foods. A sea change can be observed in development of low temperature preservation technology. It has travelled a long journey to reach this stage; however, a major break through took place in twentieth century. Low temperature technology is of two types; refrigeration and freezing. In refrigeration storage, water is in liquid phase and temperature is maintained above freezing point. In freezing technology, the food is stored below freezing point and water gets converted into ice. The former is short term preservation due to slow growth of microbes and lower enzymatic activity while the later is long time preservation due to inactivation of enzymes during blanching and inhibition of microbial activity due to unavailability of free water and much lower temperature. Low temperature preservation is widely accepted and is of commercially important in food supply chain.

Freezing : Freezing is a process where temperature of food (fruits, vegetable etc.) is lowered down considerably below freezing point so that the water present inside the food undergoes change in state from liquid to solid (ice) and gets frozen immediately eg Frozen Pea. Water is immobilized and solutes are concentrated to reduce the water activity.

Principles of preservation : Combination of low temperature, low water activity, and pre-treatments like blanching, dipping in sugar syrup etc. stop (reduce) the growth and activity of microorganisms.

Theory of freezing : Freezing takes place in two main steps

Low-temperature preservation is one of the most widely used physical approaches for extending food shelf life without seriously affecting quality. Reducing storage temperature slows microbial multiplication, enzyme activity and chemical deterioration, with inhibition increasing as temperature declines. Refrigeration maintains food above its freezing point, while freezing reduces temperature below zero and converts available water into ice. The chapter examines conventional refrigeration, advanced chilling, freezing, cryopreservation, superchilling and the influence of ice crystallisation on food quality. It explains how temperature, cooling rate and crystal size affect texture, nutritional retention and storage stability, while also addressing the limitations and quality changes associated with prolonged low-temperature storage.

Lozenges are solid preparations that contain one or more medicaments, usually in a flavored, sweetened base, that are intended to dissolve or disintegrate slowly in the mouth. They can be prepared by molding (gelatin and/or fused sucrose and sorbitol base) or by compression of sugar-based tablets. Molded lozenges are sometimes referred to as pastilles, whereas compressed lozenges may be referred to as troches. They are used for patients who cannot swallow solid oral dosage forms well as for medications designed to be released slowly to yield a constant level of drug in the oral cavity or to bathe the throat tissues in a solution of the drug. Lozenges historically have been used for the relief of minor sore throat pain and irritation and have been used extensively to deliver topical anaesthetics and antibacterial.

Advantages

1. It is easy to administer to both paediatric and geriatric patients.
2. It has a pleasant taste and will extend the time a quantity of drug remains in the oral cavity to elicit local activity.

Macaroni: Pasta made from semolina and shaped in the form of slender tubes (Plate 396).

Macaroni wheat: It is tetraploid wheat and is preferred for making macaroni, vermicelli etc.

Macaroon: A small cookie composed chiefly of egg whites, sugar, and ground almonds or coconut (Plate 397).

Mace: An aromatic spice consisting of the dried external fibrous covering of a nutmeg (Plate 398).

Mach number: It is a number representing the ratio of the speed of a body (flow velocity) to the speed of sound (sonic velocity) in a surrounding medium (as air).

Macroglobulin: A highly polymerized globulin of high molecular weight.

Macronutrient: A chemical element (as nitrogen, phosphorus, or potassium) of which relatively large quantities are essential to the growth and health of a plant or a substance (as protein or carbohydrate) essential in large amounts to the growth and health of an animal.

A number of quality management tools are being used in food processing industry. Often selection of such tools are tough as it involves several factors for decision-making. The problem of choice of quality management and tools can be solved by selection on the basis of the objective decision making process rather than on the opinion of the decision makers (Sukkarn and Thawesaengskulthai, 2015).

SYNOPSIS

Vegetables are essential for well-balanced diet since they supply phytonutriceuticals. About 3 billion people in the world are malnourished due to imbalanced diets. Regular consumption of a vegetable rich diet has undeniable effects on health since they have been strongly associated with improvement of gastrointestinal health, good vision, and reduced risk of heart disease, stroke, chronic diseases such as diabetes, and some forms of cancer.

Introduction
Makkhan (Makhan) is an indigenous(desi) butter obtained by hand churning of dahi using wooden beater (mathani). It is traditional unsalted butter characterized by its delectable and rich flavour. It is white in colour with slightly greenish tinge and has typical soft body and a smooth grainy texture with pleasant aroma. This product has been extensively used for dietary and religious practices since vedic times. The entire quantity produced forms an intermediate product for preparation of ghee (clarified butter fat). Nearly 30% of the total milk production goes for desi butter manufacture. The average yield of the product is very low ranging from 5.5-7.0% for every 100 kg milk used for the purpose. The chemical composition of the product is variable depending upon the method of manufacture. It is difficult to achieve the uniform standard of 20% moisture in the final product due to limitations in the technique adopted for its manufacture. The non fatty solids and lactic acid are derived from the method of preparation and preservation. Higher non fatty solids in makhan indicates use of self soured milk, while a high lactic acid content indicates prolonged storage and in sanitary conditions of manufacture.

ABSTRACT

Malting is the process accompanied by restricted sprouting of cereals in humid atmosphere along with controlled set of conditions. It is a process of soaking, germination and drying that causes changes to the microstructure of grains. Malting causes changes in functional and nutritive value of grains. Malting results in increase in protein content, mineral availability, in vitro protein digestibility, oil absorption capacity, water absorption capacity, water solubility index and fall in level of antinutritional factors, viscosity and bulk density. The malting conditions are significantly affected by varietal difference, maturity of grains and structural composition. Therefore, optimum malting conditions should be determined for grains in order to avail the health and nutrition benefits.

Abstract

Maintaining grain in good condition in storage requires careful, routine inspection and good storage practices. An integrated approach of several management tools and practice factors are necessary to manage stored grain to prevent deterioration and wastage: This includes:1) harvesting, handling, and storage equipment; 2) initial condition of the grain; 3) grain moisture content; 4) grain temperature; 5) aeration system management ; 6) insect and mold control; and 7) monitoring grain condition. An effective management program greatly enhances the likelihood of maintaining top quality grain. A well- designed and properly operated storage system with adequate aeration capacity, storing only clean grain at the proper moisture content and temperature, sanitizing the bin before loading, checking the grain condition regularly and correcting problems before they get out of hand are critical management strategies that must be implemented to prevent grain damage and possible serious economic loss.

Management of Calf

Management before birth

    ·    As calf management begins before birth, a few days before the calf is born, the pregnant cow is transferred to a maternity paddock, which should be near the homestead (for closer observation), well watered and free from physical objects.
 
    ·    The signs of imminent parturition (calving) include filling of udder with milk and is turgid, vulva swollen with a string of mucus hanging from vagina.
 
    ·    Insemination records can also be used to estimate the expected calving date.

1. Introduction

Fermented milk products such as yoghurt are produced through out world (Kurmann et al., 1992). Yoghurt can be characterized as a gel like coagulated milk product, having a smooth consistency and a pleasing flavour and is now widely consumed both by infant and adult populations. It is common that yogurt preparation involves the use of equal amounts of two lactic acid bacteria (LAB): Streptococcus thermophillus (St) and Lactobacillus delbrueckii ssp. bulgaricus (Lb); samples prepared with these starter bacteria are labeled Lb-St (Ng et al., 2011). In the early stage of the incubation process, Lb stimulates the growth of St releasing amino acids from casein (where the most important is valine) and producing a moderate reduction in pH due essentially to St. Yoghurt has better digestibility than milk and this is related to its comparatively high content of free amino acids. Besides nutritional value, it possesses hypocholesterolaemic (Mann, 1977) and antitumour effects (Odd et al., 1983; Reddy et al., 1983).Yoghurt may be set or stirred and has a potential for being used as dietary supplement for infants. So they cross the line between dietary supplements, health foods and conventional foods with great facility. Now a days, emphasis is given on sweeteners and more natural sweeteners will be used (Hollingsworth, 2001). Natural sweeteners can be easily incorporated in yoghurt by blending cattle milk with fruit pulps like mango. The enhancement of other nutrients e. g. vitamins and minerals will be added advantage. Mango pulp which contains a high proportion of sugar, mostly monosaccharide, is easily adsorbed by the digestive systems (Celik and Bakirci, 2003).

Soybean is a comparatively inexpensive source of high quality protein. The protein and fat contents in soybean are above 40 % and 20 %, respectively. Nutritionally, soy protein is a more balanced plant protein for human consumption. Studies have indicated that consumption of soy protein decreases total serum cholesterol and minimizes risks for several cancers (Anderson et al., 1995; Messina, 1997; Zind, 1998). The positive health benefits associated with soybeans have greatly increased its consumer awareness which has created a large market for soy foods (Ohr, 2000; Liu, 2000). The problem of beany flavour in soy products can be overcome by lactic acid fermentation (Buono et al., 1990; Granata and Morr, 1996). Soy solids are not only abandoned source of protein but also have therapeutic properties against breast, prostate, colon and lung cancers due to its isoflavones like genistein and daidzein content. Fortification with soy made yoghurt beneficial in lowering cholesterol level and blood pressure and in relieving symptoms of menopause and osteoporosis.

Introduction
Market milk holds a crucial place in human nutrition, economic development, and the dairy industry. Its consumption patterns and marketing strategies continue to adapt, influenced by evolving lifestyles, consumer preferences, and advancements in processing and packaging technologies. Regulatory frameworks ensure its safety and quality, while the wide range of milk types caters to diverse dietary and cultural requirements around the world.
Modern dairy farms rely on advanced milking machines that prioritize both efficiency and hygiene. These machines use vacuum-operated devices to gently extract milk from cows’ teats without causing discomfort. The collected milk is immediately transferred into refrigerated tanks to maintain its freshness and prevent bacterial growth. Speed and efficiency in transporting milk to processing facilities are critical to ensuring its safety and quality.
At the processing plant, milk undergoes standardization, an essential step where the fat content is adjusted to produce different types of milk, such as whole milk, toned milk, double-toned milk, and skimmed milk. This ensures uniformity in fat levels, meeting market specifications and regulatory standards such as prescribed by FSSAI in case of India.
The milk then undergoes pasteurization, a process of heating it to a specific temperature for a defined period to eliminate harmful bacteria while preserving its nutritional value. Pasteurization has significantly improved milk safety, reduced health risks, and extended its shelf life. Following this, the milk is homogenized, where fat molecules are evenly distributed to prevent cream separation. This centres a smooth texture and consistent flavor preferred by consumers.

What new research is needed, what trials and how will the ultimate consumer and Industry benefit?
 
In Brazil, the sales of functional foods amounts to US $ 500 million per year representing about 1% of the total sale of the Brazilian food processing industry. According to a report the interests are mainly for dairy products, nutraceuticals and soy-based products. ABIA forecasts a substantial growth of 4.5-5% for this segment of the market (Stanton et al., 2001). In order to exert the health benefits beyond inherent basic nutrition, it is necessary that the activity of the probiotic culture should be maintained at very high levels during the shelf life of the product.

In India, about 46 per cent of the milk produced is either consumed at the producer level or sold to non-producers in the rural area, the balance 54 per cent of the milk is available for sale to organized and unorganized players. The organized sector comprises of Government, Producers’ Owned Institutions (Milk Cooperatives & Producer Companies), and Private players which provides a fair and transparent system of milk collection round the year at the village level. The unorganized/informal sector involves local milkmen, dudhias, contractors, etc. and they are mostly found to be opportunistic, as there is no uniformity of milk price paid to producers and it varies depending upon the situation. The possibility of adulteration of milk is higher among these unorganized groups. In the areas where competition is high and the presence of the formal sector is strong, the unorganized sector generally gives higher prices and at the same time, the unorganized sector doesn’t offer remunerative prices to the producers where the organized sector is not present.

In a commercial horticultural enterprise, if the product is not marketed properly, safely and beneficially, all the investment, inputs, hard work goes in vain. Basically every commodity that is produced should reach the consumer and marketing is all about how the commodity reaches the consumer. There is no fun of producing any commodity if it does not reach the consumer.

The word market has been derived form Latin word “marcatus” meaning merchandise, where people conduct business. Market therefore refers to place where goods/ commodity and services are bought and sold.

Marketing is a sum total of business activities through which the goods and services are either bought or sold. Cundiff and Still defined marketing as “the business process by which products are matched with markets and through which transfer of ownership are affected.

Why Marketing of Fruits and Vegetables is Complex and Risky as Compared to Other Goods

1. INTRODUCTION

Marketing is a general term used to describe the activities that lead to the sale of your product. It is the process of planning and executing pricing, promotion and distribution programs to satisfy customer needs. It involves collecting information, analyzing alternative market outlets, developing different product forms, pricing products to compete in the marketplace, defining the scope of the proposed market area and meeting consumers’ needs. So marketing is more than just selling a product or service. It is an essential part of any business. Without a good marketing program, even the best businesses fails.

Value-added agricultural groups typically don’t pay enough attention to marketing. Selling agricultural commodities usually only involves hauling the commodities to a market where there is usually a willing buyer. So farmers often spend their time analyzing brick and mortar issues associated with processing and manufacturing (making the product rather than marketing the product). Often the attitude is that, if we make the product, someone will come along and buy it. So value-added agricultural businesses consistently fail because they do not understand the importance of designing and implementing a good marketing program.

As a first step, ‘A Marketing Primer and Marketing Basics’ will help you with a basic understanding of marketing. Successful marketing involves designing and implementing a marketing strategy for your product. Marketing Strategies provide generic strategies for various types of products and product buyers. In a simple term, marketing activities and strategies result in making products available that satisfy customers while making profits for the companies that offer those products.

Marriage and family dynamics concern the structures, relationships, roles and processes through which families function and change. This chapter examines forms of marriage and family, mate selection, family authority, role allocation, communication, adjustment and decision-making. It considers changing family patterns, marital relationships, parenting styles, family life-cycle stages, conflict, divorce and the influence of social and cultural factors. Questions also address family welfare, interpersonal relationships, responsibilities, values and the challenges experienced by contemporary families. By connecting theoretical concepts with everyday family situations, the chapter helps learners understand how individuals and families adapt to transitions, maintain relationships and promote the well-being of their members.

According to International Dairy Federation(IDF),1980, Mastitis also called as ‘mammitis’ is defined as an inflammation of the udder, almost always of microbial origin and is the outcome of a local or a general infection. The common symptoms are related to inflammation, viz., swollen, hot, red, and painful udders. Mastitis can be classified based on symptoms or on the causative organism.

A) Forms of mastitis based on symptoms

    1.    Acute or clinical
    2.    Sub-acute or subclinical
    3.    Chronic.

2.1 Introduction

Many complicated engineering principles are to be analyzed and applied, before any food processing operations takes shape of a commercially viable enterprise. The size and type of the required equipments have to be specified and their sequences have to be arranged. Further, the process analysis consists of understanding of material and energy balances. This chapter provides the application of steady state conservation of mass and energy equations to analyze food-processing operations.

Strategic partnerships and productive outreach play a crucial role for new technologies to successfully reach the market, drive growth, and strengthen a country’s global competitiveness, Outreach programs have various benefits, ranging from technology transfer awareness, communication of stakeholders, industry, government, to academy partnership promotions. These efforts help in establishing connections, communicating opportunities, and encouraging active engagement from key stakeholders. Outreach activities can be performed under two broad categories:
1. Written communication includes all communication which can be viewed, shared, or made accessible for a set of people in a passive manner. This includes reports, newsletters, guidance, and online content which provide insights of worth for stakeholders.
2. Human outreach includes all direct communication like c face-to-face or verbal form communication it included conferences, conventions, workshops, seminars and personal communication with industry leaders.
The type of outreach creates stronger, more personal connections. An effective outreach strategy usually combines both human and written outreach efforts. By following this strategy TTOs can expand and strengthen partnerships, and make it easier for research-led innovations to get transition from lab to market more effectively. This chapter explores key outreach models, strategic networking approaches, and proven practices for building impactful partnerships in technology transfer.

Maturity at harvest is the most important determinant of storage life and final fruit quality. Maturity indices are determined for many fruit, vegetable and floral crops. Harvesting crops at proper maturity allows handlers to begin their work with the best possible quality produce. Produce harvested too early may lack flavour and may not ripen properly, while produce harvested too late may be fibrous or over ripe.
 
Almost all fruits reach their best eating quality when allowed to ripen on the tree or plant (exceptions e.g., pears, avocados, and bananas). In general, fruits become sweeter, more colourful, and softer as they mature. A few fruits are usually picked mature but unripe so that they withstand post harvest handling system when shipped long distances.  Most of  currently used maturity evaluation is based on a compromise between those methods that would ensure the best eating quality and those that provide flexibility in transportation and marketing.  Optimum harvesting stage depends upon type of fruit or vegetable and their final use. Such a division is usually based on their classification according to physiology, environmental conditions, ripening bahaviour and nutritional aspect. Some of the classifications, important for their harvesting and storage are briefed in  subsequent sections.

Physiological Development

Fruits and vegetables can be divided into 3 stages based n their physiological development i.e. growth, maturation and senescence.

Growth: This generally refers to cell division, enlargement and differentiation ultimately giving a particular size, weight and volume to the commodity.

Maturation: It is initiated before the ceasation of growth and lasts till the onset of senescence.

Senescence: The stage when anabolic (synthetic) processes almost terminate and catabolic (degradative) processes are initiated and speeded up causing ageing and finally death of tissues.

Ripening: Stage that begins with the last stages of maturation and lasts till the beginning (first stage) of senescence. Ripening is a very important event in the life of a plant as it transforms a physiologically mature but inedible (or not preferred to be eaten) plant part into an edible, visually and olfactorily attractive and tasty commodity. Ripening marks the completion of developmental phase and is an irrevessible event.

Maturity

It is derived from Latin word ‘Maturus’ which means ripen. It is that stage of fruit development, which ensures attainment of maximum edible quality at the completion of ripening process.

Maturation

It is the developmental process by which the fruit attains maturity. It is the transient phase of development from near completion of physical growth to attainment of physiological maturity. There are different stages of maturation e.g. immature, mature, optimally mature, over mature.

Maturity Indices

The factors for determining the harvesting of horticulture commodities according to consumer purpose and type of commodity.

Maturity Indices is two type

1. MATURITY INDICES

Maturity indices (right time of harvesting) are quality factors that give clues as to when a product should be harvested to allow marketing flexibility and ensure the attainment of minimum acceptable quality to the user. It also refers to the set of criteria used to determine the stage of maturity for harvesting the horticultural crops. Commodities harvested either pre-mature or too late are more susceptible to postharvest physiological disorders, diseases and have poor shelf life than harvested at right stage of maturity. The pickers/ handlers are trained in methods of identifying produce that is ready for harvest. However, optimum harvesting stages depends upon type of produce and their final use. Horticultural crops may be harvested at two main maturity levels i.e., physiological maturity and commercial or horticultural maturity. Therefore, the proper stage/maturity indices for harvesting of all horticultural crops should be identified for their implementation during harvesting. Horticultural maturity in relation to developmental stages of the plants is depicted in Fig 3.1.

Horticulture crops contribute significantly for the total agricultural production and productivity. World production of fruits accounted for the total volume of 933 million tonnes (FAO, 2023). India being second largest producer for majority of fruit commodities had a production total reaching 108.34 million tonnes in 2022-2023 from an area of 7.15 million hectares. It accounts for 33 per cent to the agriculture GVA (Gross Value Added) and plays an important role in the Indian economy. India is second largest producer of majority of fruits and vegetables. Diverse agro-climatic zones in the country make it possible to grow almost all varieties of fruits in India. Produced fruits are used for domestic consumption, processing and export purposes. During 2022 23, fresh fruits exports was valued at 6219.46 crores (APEDA, 2023). The fruits grown in India includes domestic fruits and nuts along with the exotic fruits contributing for the food and nutritional security. The growth of these economically important fruits provides scope for maintaining rich germplasm, enhance bio-diversity and maintain ecological balance.

Introduction

Measurement of pH of a solution and preparation of different types/strength of buffers are common practices in a laboratory, particularly in the Biochemistry and Molecular Biology laboratories. Therefore, in this chapter you will be acquainted with the procedures of measuring pH of a solution as well as preparation of some of the commonly used buffers in a laboratory.

Potential or Power of Hydrogen Ion (pH)

Measurement of pH of a solution is measuring the molar concentration of hydrogen ion [H+] in the solution, which is an indication of the acidity or basicity of the solution. The symbol pH stands for “power of hydrogen” and numerical value for pH is just the negative logarithm of the molar concentration of hydrogen ions [H+]. The ionic product of water (Kw ) is the basis for the pH scale. The total hydrogen ion concentration from all the sources and it can be experimentally measured.

The pH scale designates the concentration of H+ (and thus of OH−) in an aqueous solution, which ranges between 1.0 M H+ and 1.0 M OH−. The term pH is defined by the expression

Thus, the ionic product of water makes it possible to calculate the concentration of H+, with given concentration of OH−, and vice versa. The value of 7 for pH of a neutral solution is not an arbitrarily chosen figure; it is derived from the absolute value of the ionic product of water. A solution having pH greater than 7 is basic, and the concentration of OH− is greater than that of H+. A solution having a pH less than 7 is acidic.

Meat and Meat Products

    1.    Meat can be defined as “the muscle tissue of slaughter animals”.
    2.    meat is composed of water, fat, protein, minerals and a small proportion of carbohydrate

(Ref: 1997-2016 American Meat Science Association)
The methods used for cooking meat can be divided into two groups:
1. Dry heat methods
2. Moist heat methods

6.1 Introduction

The food industry produces large volumes of waste both solid and liquid, starting from the initial step of raw material to the final consumption of processed food. Apart from a loss of valuable biomass and nutrients, the generated waste poses increased disposal and potentially severe pollution problems. Meat and meat industry is no exception where slaughter houses, meat processors, wholesalers and rendering plant generates huge amount of waste [1, 2].

Meat and meat processing industry, is among the least profitable industries despite its immense size and large gross sales. Effective recovery and utilization of by-products and wastes is the lifeline of meat and poultry processing industry. Thus, it becomes imperative that an effort be made to reduce expenses by employing the use of new or modified processing methods and through in-plant treatment, where waste effluents and by-products could be recovered and often upgraded to useful products of higher value. Meat processing wastes have a potential for recycling raw materials or for conversion into useful products of higher value as by-product or even as raw material for other industries or for use as food or feed after biological treatment.

Abstract

The interest in the utilization of industrial by-products is increasing day by day and is major reason for exploring different meat, poultry and fish industry waste and optimization of extracting conditions of different valuable compounds. Utilization of these by-products in effective manner can be positive for meat industry economy as well as environmental pollution of the country. Besides the potential revenue losses, non-utilized or underutilized by-products accounts for the extra cost for their disposal. Meat producers are converting these by-products into value added edible and inedible form. Among the most prominent current uses of meat, poultry and fish waste are food ingredients, water treatment, cosmetic and personal care products, biogas/biodiesel, biomedical and pharmaceutical application. Several studies have dealt with the production of several value-added products such as gelatin, collagen, enzymes, specific proteins, bioactive peptides, chitin, chitosan, and pigments fro m the meat industries waste. Recently, in the food and pharmaceutical industry, an increasing number of new applications have been found for products generated from meat, poultry and fish industry waste; in different products as foaming agents, emulsifiers, biodegradable film-forming materials, colloid stabilizers, and microencapsulating agents, in line with the growing trend to replace synthetic agents with more natural ones.

INTRODUCTION

Meat is the flesh of animals that is used for food and consists of muscle, fat and bone. If the muscle which is commonly known as the lean meat, is examined under the microscope, it is seen to be made up of bundles of fibers held together by a thin membrane called connective tissue. Further study reveals that these fibers are in readily hollow tubes that vary in length in different animals and in different muscles in the same animals that are filled with a fluid, sometimes called muscle juice, which is known to contain protein, minerals and extractives. The forms of protein in the muscles are myosin (a globulin) and myogen (an albumen) and in addition, on red meats, hemoglobin.

The biofilm formation is usually assayed by using Congo Red Agar (CRA) plate test. According to a method developed by Freeman et al., (1989) the isolates are stored in nutrient agar slants and screened for biofilm formation ability using CRA plates. Biofilm forming strains are observed as dark black colonies while others as red colonies on the CRA plates. Recently, the concept of these biofims have changed with new imaging technologies, biochemical methods and molecular ecosystem biology tools. A biofilm structure can be observed in 3-D form to the nano-scale level (Neu and Lawrence, 2015). A lot of studies are being conducted on the physiology of the biofilm cells, the genotypic and phenotypic variation among the biofilm community, as well as the biofilm metabolome, proteome and transcriptome (Raes and Bork, 2008). This will help in the the development of efficient methods to control deleterious biofilms (clinical biofilms, food contaminants, biofouling on industrial equipment and on ship hulls) and to enhance and modulate beneficial ones

The lack of mechanistic understanding of probiotic activity is a major drawback for the prediction of safety of probiotic intervention. The complex gut-associated microbial ecosystem and nutritionally related factors are the most important environmental triggers for the development and modification of chronic degenerative diseases including immune and metabolic pathologies. In fact, the interaction between the gut microbial ecosystem and the host is considered to be a critical factor in overall health or disease. Whether probiotics will exert protective, harmful, immune-stimulating or immune-suppressing effects on a host is dependent on the interaction between the microbial signals, the genetic make-up of the host and the effects by the environment. Many studies have revealed that certain probiotic bacteria stimulate immune cell proliferation and activity as evidenced by the production of cytokines and antibodies, thereby enhancing the effectiveness of the immune response against pathogens. Ng et al. (2009)

A large number of people in developing countries have traditionally depends on products derived from plants, especially from forests, for curing human and livestock ailments. Additionally, several aromatic plants are popular for domestic and commercial uses. Collectively they are called medicinal and aromatic plants (MAPs). About 12.5% of the 4,22,000 plant species documented worldwide are reported to have medicinal values. With dwindling supplies from natural sources and increasing global demand, the medicinal and aromatic plants, will need to be cultivated to ensure their regular supply for processing and value added products.

The term “Medicinal and Aromatic plants” generally denotes those non-aromatic and aromatic plants, which are used for medicinal, perfumery, dye and cosmetic purposes. They are rich in secondary metabolites and are potential sources of drugs. Generally the whole plant roots, stem, bark, leaves, flowers, fruits, gums and oleoresins, etc. are used.

India has been considered as treasure house of valuable medicinal and aromatic plant species. Ministry of Environment and Forests have identified and documented over 9500 plant species considering their importance in the pharmaceutical industry. In the present context of ‘back to nature’ in health care, it is relevant that these valuable plant species are not only preserved but also their cultivation developed in order to meet the entire demand of the domestic industries as also to exploit the bright prospect for export. Shift from collection to cultivation of medicinal & aromatic plants will also ensure purity, authenticity and sustainable supply of raw materials required for herbal drugs, including polyherbals.

1. Introduction

Pulpy and juicy fruits like orange, guava, banana, grape, mango, papaya, pears, apples and jackfruit can be converted into fruit products like squashes, juices, cordials and ready-to-serve (RTS) fruit beverages. These RTS fruit beverages are both refreshing and thirst quenching and have become very popular. Liquid fruits are the clarified juices prepared from these pulpy and juicy fruits. There is a demand for liquid fruits in the international market for various applications. The liquid fruits can be used as a natural alternative to synthetic beverages. They can be suitably concentrated or diluted, blended with other juices and also can be carbonated as fruit based soft drinks. Removals of pulpy material from the juices make them easier to preserve by pasteurization and are amenable to carbonation. Pulpy fruits can be successfully processed into liquid fruits (clarified juices) by using pectic enzymes. The emphasis of the fruit juice processing industry has, so far, been mainly on conventional clarification processes like enzymatic and chemical treatments followed by filtration using filter aids; and concentration by vacuum evaporation.

1. Introduction

Membranes separation processes have gained widespread applications in food industry. High selectivity of membrane has been exploited for separating a particular component from complex liquid food mixture and for controlled release of active ingredients like preservatives or flavor compounds. Today, a number of chemical processes utilizing the unique properties of membrane have been developed for commercial application in food industry with specific advantage of low energy requirement. Membrane separation/molecular sieving is one among those food engineering principals which has found broad range of applications including concentration of heat labile compounds, recovery of solvent, downstream processing, flavor volatile recovery, deacidification, desalination, waste water treatment etc

Introduction

Since 1990, there has been a lot of interest in functional foods and nutraceuticals, particularly because of their impact effects on human health and the prevention of certain diseases. Apart from growing good quality natural products, there are challenges in extracting, refining, analyzing active ingredients, and evaluating safety before an effective, reliable product is made [1,2]. Special attention needs to be focused on separation and purification mainly because 40-80% of the cost of production is assigned to separation and purification unit operations in making functional foods and nutraceuticals. There are also several carotenoids and polyphenol products that have been identified from various plants and a single plant could contain highly complex profiles of these compounds. These are labile to heat, air, and light, and they may exist at low concentrations in the plants. This makes the separation and detection of nutraceuticals a challenging task. The membrane techniques used for the separation of nutraceuticals from the natural products, as well as their applications and influencing factors are discussed in this chapter [3, 4].